Linux wireless drivers development
 help / color / mirror / Atom feed
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 02/22] ath9k: Handle ASPM properly
Date: Thu, 24 May 2012 09:31:59 +0530	[thread overview]
Message-ID: <20413.45751.990396.877343@gargle.gargle.HOWL> (raw)

ASPM has to be disabled when BTCOEX is in use, do this properly
by calling the bus-specific ASPM init routine after the
BTCOEX scheme has been determined.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/hw.c   |   11 -----------
 drivers/net/wireless/ath/ath9k/init.c |    3 +++
 drivers/net/wireless/ath/ath9k/pci.c  |    5 +++++
 3 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index abe05ec..02ce524 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -390,14 +390,6 @@ static void ath9k_hw_disablepcie(struct ath_hw *ah)
 	REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
 }
 
-static void ath9k_hw_aspm_init(struct ath_hw *ah)
-{
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	if (common->bus_ops->aspm_init)
-		common->bus_ops->aspm_init(common);
-}
-
 /* This should work for all families including legacy */
 static bool ath9k_hw_chip_test(struct ath_hw *ah)
 {
@@ -693,9 +685,6 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 	if (r)
 		return r;
 
-	if (ah->is_pciexpress)
-		ath9k_hw_aspm_init(ah);
-
 	r = ath9k_hw_init_macaddr(ah);
 	if (r) {
 		ath_err(common, "Failed to initialize MAC address\n");
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 3e22839..9dfce1a 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -597,6 +597,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	ath9k_cmn_init_crypto(sc->sc_ah);
 	ath9k_init_misc(sc);
 
+	if (common->bus_ops->aspm_init)
+		common->bus_ops->aspm_init(common);
+
 	return 0;
 
 err_btcoex:
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index a856b51..6ec9f88 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -115,6 +115,9 @@ static void ath_pci_aspm_init(struct ath_common *common)
 	int pos;
 	u8 aspm;
 
+	if (!ah->is_pciexpress)
+		return;
+
 	pos = pci_pcie_cap(pdev);
 	if (!pos)
 		return;
@@ -138,6 +141,7 @@ static void ath_pci_aspm_init(struct ath_common *common)
 		aspm &= ~(PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
 		pci_write_config_byte(parent, pos + PCI_EXP_LNKCTL, aspm);
 
+		ath_info(common, "Disabling ASPM since BTCOEX is enabled\n");
 		return;
 	}
 
@@ -147,6 +151,7 @@ static void ath_pci_aspm_init(struct ath_common *common)
 		ah->aspm_enabled = true;
 		/* Initialize PCIe PM and SERDES registers. */
 		ath9k_hw_configpcipowersave(ah, false);
+		ath_info(common, "ASPM enabled: 0x%x\n", aspm);
 	}
 }
 
-- 
1.7.10.2


                 reply	other threads:[~2012-05-24  4:03 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20413.45751.990396.877343@gargle.gargle.HOWL \
    --to=c_manoha@qca.qualcomm.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox