From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 2/7] ath9k: Fix work handling
Date: Mon, 4 Jun 2012 20:23:43 +0530 [thread overview]
Message-ID: <20428.52215.217721.253157@gargle.gargle.HOWL> (raw)
* Currently, there is no synchronization between the reset
work and the tx-poll work. Fix this and make sure that we
bail out properly if a reset work is in progress.
* Cleanup the PLL WAR and enable it for AR9340 too and
use a helper for restarting work/timers after a reset.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
drivers/net/wireless/ath/ath9k/link.c | 33 ++++++++++++++++++--------------
drivers/net/wireless/ath/ath9k/main.c | 22 ++++++++++++++++-----
3 files changed, 37 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index d804416..2faa181 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -431,6 +431,7 @@ void ath9k_set_beaconing_status(struct ath_softc *sc, bool status);
#define ATH_RESTART_CALINTERVAL 1200000 /* 20 minutes */
#define ATH_PAPRD_TIMEOUT 100 /* msecs */
+#define ATH_PLL_WORK_INTERVAL 100
void ath_tx_complete_poll_work(struct work_struct *work);
void ath_reset_work(struct work_struct *work);
diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c
index 7368b96..89b38a9 100644
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -52,6 +52,7 @@ void ath_tx_complete_poll_work(struct work_struct *work)
"tx hung, resetting the chip\n");
RESET_STAT_INC(sc, RESET_TYPE_TX_HANG);
ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
+ return;
}
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
@@ -107,9 +108,9 @@ out:
}
/*
- * PLL-WAR for AR9485.
+ * PLL-WAR for AR9485/AR9340
*/
-static void ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum)
+static bool ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum)
{
static int count;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
@@ -117,29 +118,33 @@ static void ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum)
if (pll_sqsum >= 0x40000) {
count++;
if (count == 3) {
- /* Rx is hung for more than 500ms. Reset it */
- ath_dbg(common, RESET, "Possible RX hang, resetting\n");
+ ath_dbg(common, RESET, "PLL WAR, resetting the chip\n");
RESET_STAT_INC(sc, RESET_TYPE_PLL_HANG);
ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
count = 0;
+ return true;
}
- } else
+ } else {
count = 0;
+ }
+
+ return false;
}
void ath_hw_pll_work(struct work_struct *work)
{
+ u32 pll_sqsum;
struct ath_softc *sc = container_of(work, struct ath_softc,
hw_pll_work.work);
- u32 pll_sqsum;
- if (AR_SREV_9485(sc->sc_ah)) {
- ath9k_ps_wakeup(sc);
- pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah);
- ath9k_ps_restore(sc);
- ath_hw_pll_rx_hang_check(sc, pll_sqsum);
- ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/5);
- }
+ ath9k_ps_wakeup(sc);
+ pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah);
+ ath9k_ps_restore(sc);
+ if (ath_hw_pll_rx_hang_check(sc, pll_sqsum))
+ return;
+
+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work,
+ msecs_to_jiffies(ATH_PLL_WORK_INTERVAL));
}
/*
@@ -293,7 +298,7 @@ void ath_paprd_calibrate(struct work_struct *work)
if (ar9003_paprd_create_curve(ah, caldata, chain)) {
ath_dbg(common, CALIBRATE,
"PAPRD create curve failed on chain %d\n",
- chain);
+ chain);
break;
}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 7a75263..032edab 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -158,6 +158,22 @@ static void ath_cancel_work(struct ath_softc *sc)
cancel_work_sync(&sc->hw_reset_work);
}
+static void ath_restart_work(struct ath_softc *sc)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+
+ ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
+
+ if (AR_SREV_9485(sc->sc_ah) || AR_SREV_9340(sc->sc_ah))
+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work,
+ msecs_to_jiffies(ATH_PLL_WORK_INTERVAL));
+
+ ath_start_rx_poll(sc, 3);
+
+ if (!common->disable_ani)
+ ath_start_ani(common);
+}
+
static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush)
{
struct ath_hw *ah = sc->sc_ah;
@@ -209,11 +225,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start)
if (sc->sc_flags & SC_OP_BEACONS)
ath_set_beacon(sc);
- ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
- ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2);
- ath_start_rx_poll(sc, 3);
- if (!common->disable_ani)
- ath_start_ani(common);
+ ath_restart_work(sc);
}
if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) {
--
1.7.10.3
reply other threads:[~2012-06-04 14:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20428.52215.217721.253157@gargle.gargle.HOWL \
--to=c_manoha@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox