From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
To: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@lists.ath9k.org>
Subject: [RFC/WIP 04/11] ath9k: Simplify ASSOC handling
Date: Mon, 9 Jul 2012 14:44:58 +0530 [thread overview]
Message-ID: <20474.41234.26520.832853@gargle.gargle.HOWL> (raw)
Cleanup the messy logic dealing with station association
and disassociation.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/main.c | 100 +++++++++++-----------------------
1 file changed, 32 insertions(+), 68 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 2619bd3..f5ee884 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1419,85 +1419,36 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
return ret;
}
-static void ath9k_bss_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+
+static void ath9k_bss_assoc_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
{
struct ath_softc *sc = data;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
struct ath_vif *avp = (void *)vif->drv_priv;
+ struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
unsigned long flags;
- /*
- * Skip iteration if primary station vif's bss info
- * was not changed
- */
+
if (test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags))
return;
if (bss_conf->assoc) {
set_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags);
avp->primary_sta_vif = true;
+
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
common->curaid = bss_conf->aid;
ath9k_hw_write_associd(sc->sc_ah);
- ath_dbg(common, CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
- bss_conf->aid, common->curbssid);
- ath_beacon_config(sc, vif);
- /*
- * Request a re-configuration of Beacon related timers
- * on the receipt of the first Beacon frame (i.e.,
- * after time sync with the AP).
- */
- spin_lock_irqsave(&sc->sc_pm_lock, flags);
- sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
- spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
- /* Reset rssi stats */
sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
- ath_start_rx_poll(sc, 3);
-
- if (!common->disable_ani) {
- set_bit(SC_OP_ANI_RUN, &sc->sc_flags);
- ath_start_ani(common);
- }
-
- }
-}
-
-static void ath9k_config_bss(struct ath_softc *sc, struct ieee80211_vif *vif)
-{
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
- struct ath_vif *avp = (void *)vif->drv_priv;
-
- if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
- return;
+ spin_lock_irqsave(&sc->sc_pm_lock, flags);
+ sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
+ spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
- /* Reconfigure bss info */
- if (avp->primary_sta_vif && !bss_conf->assoc) {
- ath_dbg(common, CONFIG, "Bss Info DISASSOC %d, bssid %pM\n",
- common->curaid, common->curbssid);
- clear_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags);
- clear_bit(SC_OP_BEACONS, &sc->sc_flags);
- avp->primary_sta_vif = false;
- memset(common->curbssid, 0, ETH_ALEN);
- common->curaid = 0;
- }
-
- ieee80211_iterate_active_interfaces_atomic(
- sc->hw, ath9k_bss_iter, sc);
-
- /*
- * None of station vifs are associated.
- * Clear bssid & aid
- */
- if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
- ath9k_hw_write_associd(sc->sc_ah);
- clear_bit(SC_OP_ANI_RUN, &sc->sc_flags);
- del_timer_sync(&common->ani.timer);
- del_timer_sync(&sc->rx_poll_timer);
- memset(&sc->caldata, 0, sizeof(sc->caldata));
+ ath_dbg(common, CONFIG,
+ "Primary Station interface: %pM, BSSID: %pM\n",
+ vif->addr, common->curbssid);
}
}
@@ -1516,30 +1467,43 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
mutex_lock(&sc->mutex);
if (changed & BSS_CHANGED_ASSOC) {
- ath9k_config_bss(sc, vif);
+ ath_dbg(common, CONFIG, "BSSID %pM Changed ASSOC %d\n",
+ bss_conf->bssid, bss_conf->assoc);
+
+ /*
+ * Do not do anything when the opmode is not STATION.
+ */
+ if (ah->opmode == NL80211_IFTYPE_STATION) {
+ if (avp->primary_sta_vif && !bss_conf->assoc) {
+ clear_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags);
+ clear_bit(SC_OP_BEACONS, &sc->sc_flags);
+ avp->primary_sta_vif = false;
+ }
- ath_dbg(common, CONFIG, "BSSID: %pM aid: 0x%x\n",
- common->curbssid, common->curaid);
+ ieee80211_iterate_active_interfaces_atomic(sc->hw,
+ ath9k_bss_assoc_iter, sc);
+
+ if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+ memset(common->curbssid, 0, ETH_ALEN);
+ common->curaid = 0;
+ ath9k_hw_write_associd(sc->sc_ah);
+ }
+ }
}
if (changed & BSS_CHANGED_IBSS) {
- /* There can be only one vif available */
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
common->curaid = bss_conf->aid;
ath9k_hw_write_associd(sc->sc_ah);
if (bss_conf->ibss_joined) {
- sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
-
if (!common->disable_ani) {
set_bit(SC_OP_ANI_RUN, &sc->sc_flags);
ath_start_ani(common);
}
-
} else {
clear_bit(SC_OP_ANI_RUN, &sc->sc_flags);
del_timer_sync(&common->ani.timer);
- del_timer_sync(&sc->rx_poll_timer);
}
}
--
1.7.11.1
reply other threads:[~2012-07-09 9:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20474.41234.26520.832853@gargle.gargle.HOWL \
--to=c_manoha@qca.qualcomm.com \
--cc=ath9k-devel@lists.ath9k.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox