From: Mariusz Fik <fisiu82@jabster.pl>
To: linux-wireless@vger.kernel.org
Subject: Intel N 1030 desn't connect to AP with WPA2 | Linux 3.4.2
Date: Tue, 26 Jun 2012 18:27:09 +0200 [thread overview]
Message-ID: <2073595.T30nNVXCf4@pendrak> (raw)
[-- Attachment #1: Type: text/plain, Size: 1147 bytes --]
Hi,
I installed openSUSE 12.2 Beta 2 with linux 3.4.2 recently and my wifi card
has problems with connecting to AP with WPA2. Hardware I have:
| 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N
1030 [8086:008a] (rev 34)
After boot I connected to my AP and wifi worked fine. After few seconds
connection was disconnected and nm asked me again for password. Every try of
connection was unsuccessful since now. `dmesg`, in the time of trying to
connect, gives me:
| [ 434.134710] wlan0: authenticate with 00:22:15:0b:55:a3
| [ 434.143822] wlan0: direct probe to 00:22:15:0b:55:a3 (try 1/3)
| [ 434.344492] wlan0: direct probe to 00:22:15:0b:55:a3 (try 2/3)
| [ 434.545185] wlan0: send auth to 00:22:15:0b:55:a3 (try 3/3)
| [ 434.745882] wlan0: authentication with 00:22:15:0b:55:a3 timed out
| [ 434.747111] iwlwifi 0000:02:00.0: ACTIVATE a non DRIVER active station id
0 addr 00:22:15:0b:55:a3
Full dmesg is available here: http://wklej.org/hash/1dc3164fa7/
Any hints about solving it?
--
Pozdrawiam / Best regards,
Mariusz Fik
openSUSE Community Member
GPG: 5FCE 7241 B3B9 32FD 455B C30E 42D6 6C88 9E83 7C3D
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next reply other threads:[~2012-06-26 16:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-26 16:27 Mariusz Fik [this message]
2012-06-26 16:53 ` Intel N 1030 desn't connect to AP with WPA2 | Linux 3.4.2 Johannes Berg
2012-07-02 5:37 ` Mariusz Fik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2073595.T30nNVXCf4@pendrak \
--to=fisiu82@jabster.pl \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).