linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Intel N 1030 desn't connect to AP with WPA2 | Linux 3.4.2
@ 2012-06-26 16:27 Mariusz Fik
  2012-06-26 16:53 ` Johannes Berg
  0 siblings, 1 reply; 3+ messages in thread
From: Mariusz Fik @ 2012-06-26 16:27 UTC (permalink / raw)
  To: linux-wireless

[-- Attachment #1: Type: text/plain, Size: 1147 bytes --]

Hi,

I installed openSUSE 12.2 Beta 2 with linux 3.4.2 recently and my wifi card 
has problems with connecting to AP with WPA2. Hardware I have:
| 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 
1030 [8086:008a] (rev 34)

After boot I connected to my AP and wifi worked fine. After few seconds 
connection was disconnected and nm asked me again for password. Every try of 
connection was unsuccessful since now. `dmesg`, in the time of trying to 
connect, gives me:
| [  434.134710] wlan0: authenticate with 00:22:15:0b:55:a3
| [  434.143822] wlan0: direct probe to 00:22:15:0b:55:a3 (try 1/3)
| [  434.344492] wlan0: direct probe to 00:22:15:0b:55:a3 (try 2/3)
| [  434.545185] wlan0: send auth to 00:22:15:0b:55:a3 (try 3/3)
| [  434.745882] wlan0: authentication with 00:22:15:0b:55:a3 timed out
| [  434.747111] iwlwifi 0000:02:00.0: ACTIVATE a non DRIVER active station id 
0 addr 00:22:15:0b:55:a3

Full dmesg is available here: http://wklej.org/hash/1dc3164fa7/

Any hints about solving it?
-- 
Pozdrawiam / Best regards,
Mariusz Fik
openSUSE Community Member
GPG: 5FCE 7241 B3B9 32FD 455B C30E 42D6 6C88 9E83 7C3D

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Intel N 1030 desn't connect to AP with WPA2 | Linux 3.4.2
  2012-06-26 16:27 Intel N 1030 desn't connect to AP with WPA2 | Linux 3.4.2 Mariusz Fik
@ 2012-06-26 16:53 ` Johannes Berg
  2012-07-02  5:37   ` Mariusz Fik
  0 siblings, 1 reply; 3+ messages in thread
From: Johannes Berg @ 2012-06-26 16:53 UTC (permalink / raw)
  To: Mariusz Fik; +Cc: linux-wireless

On Tue, 2012-06-26 at 18:27 +0200, Mariusz Fik wrote:
> Hi,
> 
> I installed openSUSE 12.2 Beta 2 with linux 3.4.2 recently and my wifi card 
> has problems with connecting to AP with WPA2. Hardware I have:
> | 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 
> 1030 [8086:008a] (rev 34)
> 
> After boot I connected to my AP and wifi worked fine. After few seconds 
> connection was disconnected and nm asked me again for password. Every try of 
> connection was unsuccessful since now. `dmesg`, in the time of trying to 
> connect, gives me:
> | [  434.134710] wlan0: authenticate with 00:22:15:0b:55:a3
> | [  434.143822] wlan0: direct probe to 00:22:15:0b:55:a3 (try 1/3)
> | [  434.344492] wlan0: direct probe to 00:22:15:0b:55:a3 (try 2/3)
> | [  434.545185] wlan0: send auth to 00:22:15:0b:55:a3 (try 3/3)
> | [  434.745882] wlan0: authentication with 00:22:15:0b:55:a3 timed out

You're probably running into the TX power issue, that is fixed in 3.4.4:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commitdiff;h=75862961e9b445a9bfce25b9da70ef930a857762


> | [  434.747111] iwlwifi 0000:02:00.0: ACTIVATE a non DRIVER active station id 
> 0 addr 00:22:15:0b:55:a3

I have a separate fix for this, but I think it's a red herring and
probably doesn't cause your problem.

johannes


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Intel N 1030 desn't connect to AP with WPA2 | Linux 3.4.2
  2012-06-26 16:53 ` Johannes Berg
@ 2012-07-02  5:37   ` Mariusz Fik
  0 siblings, 0 replies; 3+ messages in thread
From: Mariusz Fik @ 2012-07-02  5:37 UTC (permalink / raw)
  To: linux-wireless

[-- Attachment #1: Type: text/plain, Size: 1656 bytes --]

Dnia wtorek, 26 czerwca 2012 18:53:02 Johannes Berg pisze:
> On Tue, 2012-06-26 at 18:27 +0200, Mariusz Fik wrote:
> > Hi,
> > 
> > I installed openSUSE 12.2 Beta 2 with linux 3.4.2 recently and my wifi
> > card
> > 
> > has problems with connecting to AP with WPA2. Hardware I have:
> > | 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N
> > 
> > 1030 [8086:008a] (rev 34)
> > 
> > After boot I connected to my AP and wifi worked fine. After few seconds
> > connection was disconnected and nm asked me again for password. Every try
> > of connection was unsuccessful since now. `dmesg`, in the time of trying
> > to> 
> > connect, gives me:
> > | [  434.134710] wlan0: authenticate with 00:22:15:0b:55:a3
> > | [  434.143822] wlan0: direct probe to 00:22:15:0b:55:a3 (try 1/3)
> > | [  434.344492] wlan0: direct probe to 00:22:15:0b:55:a3 (try 2/3)
> > | [  434.545185] wlan0: send auth to 00:22:15:0b:55:a3 (try 3/3)
> > | [  434.745882] wlan0: authentication with 00:22:15:0b:55:a3 timed out
> 
> You're probably running into the TX power issue, that is fixed in 3.4.4:
> http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commitdi
> ff;h=75862961e9b445a9bfce25b9da70ef930a857762
> > | [  434.747111] iwlwifi 0000:02:00.0: ACTIVATE a non DRIVER active
> > | station id> 
> > 0 addr 00:22:15:0b:55:a3
> 
> I have a separate fix for this, but I think it's a red herring and
> probably doesn't cause your problem.
> 
> johannes

I updated kernel to 3.4.4 and it fixed my issue.
Thanks a lot.
-- 
Pozdrawiam / Best regards,
Mariusz Fik
openSUSE Community Member
GPG: 5FCE 7241 B3B9 32FD 455B C30E 42D6 6C88 9E83 7C3D

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2012-07-02  5:37 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-06-26 16:27 Intel N 1030 desn't connect to AP with WPA2 | Linux 3.4.2 Mariusz Fik
2012-06-26 16:53 ` Johannes Berg
2012-07-02  5:37   ` Mariusz Fik

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).