From: Milan Bouchet-Valat <nalimilan@club-internet.fr>
To: Arend van Spriel <arend@broadcom.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
Date: Thu, 2 Feb 2012 10:35:51 +0100 (CET) [thread overview]
Message-ID: <2106119310.135199.1328175351022.JavaMail.www@wsfrf1310> (raw)
In-Reply-To: <13367957.180704.1328018261479.JavaMail.www@wsfrf1118>
[-- Attachment #1: Type: text/plain, Size: 80 bytes --]
(For reference, I sent the missing attachmend privately to Arend two days ago.)
[-- Attachment #2: messages --]
[-- Type: application/octet-stream, Size: 118411 bytes --]
Jan 31 12:49:50 milan kernel: [54241.322370] PM: Syncing filesystems ... done.
Jan 31 13:59:56 milan kernel: [54242.570019] Freezing user space processes ... (elapsed 0.05 seconds) done.
Jan 31 13:59:56 milan kernel: [54242.624909] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 31 13:59:56 milan kernel: [54242.636029] Suspending console(s) (use no_console_suspend to debug)
Jan 31 13:59:56 milan kernel: [54242.636914] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 31 13:59:56 milan kernel: [54242.637509] sd 0:0:0:0: [sda] Stopping disk
Jan 31 13:59:56 milan kernel: [54242.691781] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Jan 31 13:59:56 milan kernel: [54242.691803] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Jan 31 13:59:56 milan kernel: [54242.782280] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Jan 31 13:59:56 milan kernel: [54243.226915] PM: suspend of devices complete after 591.755 msecs
Jan 31 13:59:56 milan kernel: [54243.246834] r8169 0000:01:00.0: wake-up capability enabled by ACPI
Jan 31 13:59:56 milan kernel: [54243.279791] PM: late suspend of devices complete after 52.957 msecs
Jan 31 13:59:56 milan kernel: [54243.279957] ACPI: Preparing to enter system sleep state S3
Jan 31 13:59:56 milan kernel: [54243.325978] PM: Saving platform NVS memory
Jan 31 13:59:56 milan kernel: [54243.329910] Disabling non-boot CPUs ...
Jan 31 13:59:56 milan kernel: [54243.331928] CPU 1 is now offline
Jan 31 13:59:56 milan kernel: [54243.333879] CPU 2 is now offline
Jan 31 13:59:56 milan kernel: [54243.335678] CPU 3 is now offline
Jan 31 13:59:56 milan kernel: [54243.336121] Extended CMOS year: 2000
Jan 31 13:59:56 milan kernel: [54243.336331] ACPI: Low-level resume complete
Jan 31 13:59:56 milan kernel: [54243.336386] PM: Restoring platform NVS memory
Jan 31 13:59:56 milan kernel: [54243.336956] Extended CMOS year: 2000
Jan 31 13:59:56 milan kernel: [54243.337179] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
Jan 31 13:59:56 milan kernel: [54243.337187] Enabling non-boot CPUs ...
Jan 31 13:59:56 milan kernel: [54243.337317] Booting Node 0 Processor 1 APIC 0x1
Jan 31 13:59:56 milan kernel: [54243.348319] Calibrating delay loop (skipped) already calibrated this CPU
Jan 31 13:59:56 milan kernel: [54243.368625] NMI watchdog enabled, takes one hw-pmu counter.
Jan 31 13:59:56 milan kernel: [54243.368888] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 31 13:59:56 milan kernel: [54243.368893] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.368898] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.368902] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.368937] CPU1 is up
Jan 31 13:59:56 milan kernel: [54243.369334] Switched to NOHz mode on CPU #1
Jan 31 13:59:56 milan kernel: [54243.369442] Booting Node 0 Processor 2 APIC 0x4
Jan 31 13:59:56 milan kernel: [54243.380443] Calibrating delay loop (skipped) already calibrated this CPU
Jan 31 13:59:56 milan kernel: [54243.400758] NMI watchdog enabled, takes one hw-pmu counter.
Jan 31 13:59:56 milan kernel: [54243.401011] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 31 13:59:56 milan kernel: [54243.401016] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.401022] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.401026] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.401221] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
Jan 31 13:59:56 milan kernel: [54243.401230] CPU2 is up
Jan 31 13:59:56 milan kernel: [54243.401277] Switched to NOHz mode on CPU #2
Jan 31 13:59:56 milan kernel: [54243.401309] Booting Node 0 Processor 3 APIC 0x5
Jan 31 13:59:56 milan kernel: [54243.412310] Calibrating delay loop (skipped) already calibrated this CPU
Jan 31 13:59:56 milan kernel: [54243.432613] NMI watchdog enabled, takes one hw-pmu counter.
Jan 31 13:59:56 milan kernel: [54243.432891] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 31 13:59:56 milan kernel: [54243.432896] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.432901] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.432906] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.432961] CPU3 is up
Jan 31 13:59:56 milan kernel: [54243.434803] Switched to NOHz mode on CPU #3
Jan 31 13:59:56 milan kernel: [54243.435231] ACPI: Waking up from system sleep state S3
Jan 31 13:59:56 milan kernel: [54243.504575] PM: early resume of devices complete after 0.727 msecs
Jan 31 13:59:56 milan kernel: [54243.504684] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 31 13:59:56 milan kernel: [54243.504724] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jan 31 13:59:56 milan kernel: [54243.504865] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 31 13:59:56 milan kernel: [54243.505147] sd 0:0:0:0: [sda] Starting disk
Jan 31 13:59:56 milan kernel: [54243.518093] r8169 0000:01:00.0: wake-up capability disabled by ACPI
Jan 31 13:59:56 milan kernel: [54243.572104] Extended CMOS year: 2000
Jan 31 13:59:56 milan kernel: [54243.759839] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
Jan 31 13:59:56 milan kernel: [54243.810650] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 31 13:59:56 milan kernel: [54243.812650] ata5: SATA link down (SStatus 0 SControl 300)
Jan 31 13:59:56 milan kernel: [54243.867013] ata2.00: configured for UDMA/100
Jan 31 13:59:56 milan kernel: [54243.917671] usb 2-1.6: reset high speed USB device number 5 using ehci_hcd
Jan 31 13:59:56 milan kernel: [54244.066420] usb 2-1.3: reset full speed USB device number 3 using ehci_hcd
Jan 31 13:59:56 milan kernel: [54244.153391] btusb 2-1.3:1.0: no reset_resume for driver btusb?
Jan 31 13:59:56 milan kernel: [54244.153397] btusb 2-1.3:1.1: no reset_resume for driver btusb?
Jan 31 13:59:56 milan kernel: [54245.946951] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 31 13:59:56 milan kernel: [54245.949040] ata1.00: configured for UDMA/100
Jan 31 13:59:56 milan kernel: [54246.615223] PM: resume of devices complete after 3116.002 msecs
Jan 31 13:59:56 milan kernel: [54246.615790] Restarting tasks ... done.
Jan 31 13:59:56 milan systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
Jan 31 13:59:56 milan kernel: [54246.622008] video LNXVIDEO:00: Restoring backlight state
Jan 31 13:59:57 milan bluetoothd[962]: HCI dev 0 unregistered
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: HCI dev 0 unregistered
Jan 31 13:59:57 milan bluetoothd[962]: Stopping hci0 event socket
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: Stopping hci0 event socket
Jan 31 13:59:57 milan bluetoothd[962]: Unregister path: /org/bluez/962/hci0
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: Unregister path: /org/bluez/962/hci0
Jan 31 13:59:57 milan bluetoothd[962]: HCI dev 0 registered
Jan 31 13:59:57 milan bluetoothd[962]: Listening for HCI events on hci0
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: HCI dev 0 registered
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: Listening for HCI events on hci0
Jan 31 13:59:57 milan dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 13:59:57 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 13:59:57 milan kernel: [54247.628950] Bluetooth: hci0 command tx timeout
Jan 31 13:59:57 milan bluetoothd[962]: HCI dev 0 up
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: HCI dev 0 up
Jan 31 13:59:57 milan dbus[1022]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.68" (uid=1000 pid=1615 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.3" (uid=0 pid=962 comm="/usr/sbin/bluetoothd -n ")
Jan 31 13:59:57 milan dbus-daemon[1022]: dbus[1022]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.68" (uid=1000 pid=1615 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.3" (uid=0 pid=962 comm="/usr/sbin/bluetoothd -n ")
Jan 31 13:59:58 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 13:59:58 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 13:59:58 milan NetworkManager[1013]: <info> wake requested (sleeping: yes enabled: yes)
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> wake requested (sleeping: yes enabled: yes)
Jan 31 13:59:58 milan NetworkManager[1013]: <info> waking up and re-enabling...
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): now managed
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> waking up and re-enabling...
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): now managed
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): bringing up device.
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): bringing up device.
Jan 31 13:59:58 milan kernel: [54248.637080] r8169 0000:01:00.0: em1: link down
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): preparing device.
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): preparing device.
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 31 13:59:58 milan kernel: [54248.637600] ADDRCONF(NETDEV_UP): em1: link is not ready
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 13:59:58 milan kernel: [54248.766954] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 13:59:58 milan kernel: [54248.767000] ieee80211 phy1: brcms_ops_config: change power-save mode: false (implement)
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 13:59:58 milan kernel: [54248.767689] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 13:59:59 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 13:59:59 milan NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 13:59:59 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 13:59:59 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 13:59:59 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 13:59:59 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 13:59:59 milan dbus-daemon[1022]: ** (upowerd:1263): WARNING **: Property get or set does not have an interface string as first arg
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:00:01 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 31 14:00:01 milan dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 31 14:00:01 milan dbus-daemon[1022]: Launching FprintObject
Jan 31 14:00:01 milan dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 31 14:00:01 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 31 14:00:01 milan dbus-daemon[1022]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Jan 31 14:00:01 milan dbus-daemon[1022]: ** Message: entering main loop
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 31 14:00:01 milan kernel: [54251.590435] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 31 14:00:01 milan kernel: [54251.590445] ieee80211 phy1: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 31 14:00:01 milan kernel: [54251.590449] ieee80211 phy1: changing basic rates failed: -22
Jan 31 14:00:01 milan kernel: [54251.590452] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 31 14:00:01 milan kernel: [54251.590974] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 31 14:00:01 milan kernel: [54251.591069] cfg80211: Calling CRDA for country: FR
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> completed
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> completed
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 31 14:00:01 milan kernel: [54251.848938] cfg80211: Regulatory domain changed to country: FR
Jan 31 14:00:01 milan kernel: [54251.848942] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:00:01 milan kernel: [54251.848944] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:00:01 milan kernel: [54251.848946] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:00:01 milan kernel: [54251.848948] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:00:01 milan kernel: [54251.848950] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> dhclient started with pid 7496
Jan 31 14:00:01 milan NetworkManager[1013]: <info> dhclient started with pid 7496
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 31 14:00:02 milan dhclient[7496]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 31 14:00:02 milan dhclient[7496]: Copyright 2004-2012 Internet Systems Consortium.
Jan 31 14:00:02 milan dhclient[7496]: All rights reserved.
Jan 31 14:00:02 milan dhclient[7496]: For info, please visit https://www.isc.org/software/dhcp/
Jan 31 14:00:02 milan dhclient[7496]:
Jan 31 14:00:02 milan NetworkManager[1013]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 31 14:00:02 milan NetworkManager[1013]: Copyright 2004-2012 Internet Systems Consortium.
Jan 31 14:00:02 milan NetworkManager[1013]: All rights reserved.
Jan 31 14:00:02 milan NetworkManager[1013]: For info, please visit https://www.isc.org/software/dhcp/
Jan 31 14:00:02 milan NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 31 14:00:02 milan dhclient[7496]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:00:02 milan NetworkManager[1013]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:00:02 milan dhclient[7496]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:00:02 milan NetworkManager[1013]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:00:02 milan dhclient[7496]: Sending on Socket/fallback
Jan 31 14:00:02 milan NetworkManager[1013]: Sending on Socket/fallback
Jan 31 14:00:02 milan dhclient[7496]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 31 14:00:02 milan NetworkManager[1013]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 31 14:00:02 milan dhclient[7496]: DHCPACK from 10.92.72.1
Jan 31 14:00:02 milan NetworkManager[1013]: DHCPACK from 10.92.72.1
Jan 31 14:00:02 milan dhclient[7496]: bound to 10.92.72.73 -- renewal in 273904 seconds.
Jan 31 14:00:02 milan NetworkManager[1013]: bound to 10.92.72.73 -- renewal in 273904 seconds.
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 31 14:00:02 milan NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 31 14:00:02 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 31 14:00:02 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> address 10.92.72.73
Jan 31 14:00:02 milan NetworkManager[1013]: <info> address 10.92.72.73
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> prefix 23 (255.255.254.0)
Jan 31 14:00:02 milan NetworkManager[1013]: <info> prefix 23 (255.255.254.0)
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> gateway 10.92.72.1
Jan 31 14:00:02 milan NetworkManager[1013]: <info> gateway 10.92.72.1
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> nameserver '83.145.66.194'
Jan 31 14:00:02 milan NetworkManager[1013]: <info> nameserver '83.145.66.194'
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 31 14:00:02 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 31 14:00:03 milan avahi-daemon[1014]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 31 14:00:04 milan ntpd[1379]: Listen normally on 18 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 31 14:00:04 milan ntpd[1379]: peers refreshed
Jan 31 14:00:22 milan NetworkManager[1013]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 31 14:00:22 milan kernel: [54271.976631] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 31 14:00:22 milan avahi-daemon[1014]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 31 14:00:22 milan avahi-daemon[1014]: New relevant interface wlan0.IPv4 for mDNS.
Jan 31 14:00:22 milan avahi-daemon[1014]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 31 14:00:23 milan NetworkManager[1013]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 31 14:00:23 milan NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:4F:82 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:4F:82 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 31 14:00:23 milan NetworkManager[1013]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 31 14:00:23 milan NetworkManager[1013]: <info> Activation (wlan0) successful, device activated.
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) successful, device activated.
Jan 31 14:00:23 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 31 14:00:23 milan ntpd[1379]: Listen normally on 19 wlan0 10.92.72.73 UDP 123
Jan 31 14:00:23 milan ntpd[1379]: peers refreshed
Jan 31 14:00:24 milan ntpd[1379]: 0.0.0.0 0638 08 no_sys_peer
Jan 31 14:00:32 milan dbus-daemon[1022]: ** Message: No devices in use, exit
Jan 31 14:02:12 milan bluetoothd[962]: HCI dev 0 down
Jan 31 14:02:12 milan bluetoothd[962]: bluetoothd[962]: HCI dev 0 down
Jan 31 14:04:47 milan kernel: [54537.370808] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:05:31 milan kernel: [54580.893287] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:06:38 milan kernel: [54647.744780] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:08:28 milan kernel: [54757.570181] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:08:28 milan kernel: [54757.571506] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:08:28 milan kernel: [54757.572535] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:08:52 milan kernel: [54781.463682] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
Jan 31 14:08:52 milan kernel: [54781.464991] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
Jan 31 14:08:52 milan kernel: [54781.478951] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
Jan 31 14:11:48 milan kernel: [54957.559082] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:11:48 milan kernel: [54957.559730] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:16:39 milan kernel: [55247.511755] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 14:16:39 milan kernel: [55247.511768] ieee80211 phy1: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 31 14:16:39 milan kernel: [55247.511773] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 31 14:16:39 milan kernel: [55247.549530] cfg80211: Calling CRDA to update world regulatory domain
Jan 31 14:16:39 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 31 14:16:39 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 31 14:16:39 milan kernel: [55247.639470] cfg80211: World regulatory domain updated:
Jan 31 14:16:39 milan kernel: [55247.639474] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:16:39 milan kernel: [55247.639477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan kernel: [55247.639479] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan kernel: [55247.639482] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan kernel: [55247.639484] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan kernel: [55247.639487] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:16:39 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:16:40 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:16:40 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:16:41 milan NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to (none) ((none))
Jan 31 14:16:41 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to (none) ((none))
Jan 31 14:16:55 milan NetworkManager[1013]: <warn> (wlan0): link timed out.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: activated -> disconnected (reason 'supplicant-timeout') [100 30 11]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'supplicant-timeout') [11]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (wlan0): link timed out.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: activated -> disconnected (reason 'supplicant-timeout') [100 30 11]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'supplicant-timeout') [11]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 7496
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 7496
Jan 31 14:16:55 milan avahi-daemon[1014]: Withdrawing address record for 10.92.72.73 on wlan0.
Jan 31 14:16:55 milan avahi-daemon[1014]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 31 14:16:55 milan avahi-daemon[1014]: Interface wlan0.IPv4 no longer relevant for mDNS.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:16:55 milan dbus[1022]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:16:55 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:16:55 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 14:16:55 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 14:16:56 milan ntpd[1379]: Deleting interface #19 wlan0, 10.92.72.73#123, interface stats: received=12, sent=20, dropped=0, active_time=993 secs
Jan 31 14:16:56 milan ntpd[1379]: 88.190.25.158 interface 10.92.72.73 -> (none)
Jan 31 14:16:56 milan ntpd[1379]: 46.105.125.63 interface 10.92.72.73 -> (none)
Jan 31 14:16:56 milan ntpd[1379]: 88.190.17.126 interface 10.92.72.73 -> (none)
Jan 31 14:16:56 milan ntpd[1379]: 88.190.227.30 interface 10.92.72.73 -> (none)
Jan 31 14:16:56 milan ntpd[1379]: peers refreshed
Jan 31 14:16:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:16:58 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:16:59 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:16:59 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:17:20 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:17:20 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:20 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:17:20 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:17:20 milan NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:17:24 milan NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:17:24 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:17:24 milan NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:17:24 milan NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:17:24 milan NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:17:24 milan NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:17:24 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:17:52 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:17:52 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:52 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:17:52 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:17:52 milan NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:17:54 milan NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:17:54 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:17:54 milan NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:17:54 milan NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:17:54 milan NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:17:54 milan NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:17:54 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:21:54 milan avahi-daemon[1014]: Withdrawing address record for fe80::72f3:95ff:fe36:83df on wlan0.
Jan 31 14:21:54 milan avahi-daemon[1014]: Withdrawing workstation service for wlan0.
Jan 31 14:21:54 milan NetworkManager[1013]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy1/rfkill8 disappeared
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy1/rfkill8 disappeared
Jan 31 14:21:54 milan NetworkManager[1013]: <info> (wlan0): now unmanaged
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now unmanaged
Jan 31 14:21:54 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
Jan 31 14:21:54 milan NetworkManager[1013]: <info> (wlan0): cleaning up...
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): cleaning up...
Jan 31 14:21:54 milan NetworkManager[1013]: <warn> (4) failed to find interface name for index
Jan 31 14:21:54 milan NetworkManager[1013]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 31 14:21:54 milan NetworkManager[1013]: <error> [1328016114.120742] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (4) failed to find interface name for index
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <error> [1328016114.120742] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 31 14:21:55 milan ntpd[1379]: Deleting interface #18 wlan0, fe80::72f3:95ff:fe36:83df#123, interface stats: received=0, sent=0, dropped=0, active_time=1311 secs
Jan 31 14:21:55 milan ntpd[1379]: peers refreshed
Jan 31 14:21:58 milan kernel: [55565.634065] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Jan 31 14:21:58 milan kernel: [55565.688126] brcms_module_init: register returned 0
Jan 31 14:21:58 milan kernel: [55565.689457] cfg80211: Calling CRDA for country: US
Jan 31 14:21:58 milan kernel: [55565.695946] cfg80211: Regulatory domain changed to country: US
Jan 31 14:21:58 milan kernel: [55565.695950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:21:58 milan kernel: [55565.695954] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 31 14:21:58 milan kernel: [55565.695957] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 31 14:21:58 milan kernel: [55565.695960] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.695963] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.695966] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.695968] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 31 14:21:58 milan kernel: [55565.864911] cfg80211: Calling CRDA for country: FR
Jan 31 14:21:58 milan NetworkManager[1013]: <info> found WiFi radio killswitch rfkill10 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill10) (driver (unknown))
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> found WiFi radio killswitch rfkill10 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill10) (driver (unknown))
Jan 31 14:21:58 milan kernel: [55565.868421] cfg80211: Regulatory domain changed to country: FR
Jan 31 14:21:58 milan kernel: [55565.868423] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:21:58 milan kernel: [55565.868426] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.868428] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.868429] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.868431] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 5)
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 5)
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/3
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/3
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 14:21:58 milan kernel: [55566.181903] ieee80211 phy2: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 14:21:58 milan kernel: [55566.181916] ieee80211 phy2: brcms_ops_config: change power-save mode: false (implement)
Jan 31 14:21:58 milan kernel: [55566.182498] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:22:30 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:22:30 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:22:55 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:22:55 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:22:55 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:22:55 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:22:55 milan NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:22:57 milan NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:22:57 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:22:57 milan NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:22:57 milan NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:22:57 milan NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:22:57 milan NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:22:57 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:23:00 milan avahi-daemon[1014]: Withdrawing workstation service for wlan0.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): now unmanaged
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> unmanaged (reason 'removed') [50 10 36]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now unmanaged
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'removed') [36]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> unmanaged (reason 'removed') [50 10 36]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'removed') [36]
Jan 31 14:23:00 milan NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: nm_system_iface_flush_routes: assertion `iface != NULL' failed
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: nm_system_iface_flush_routes: assertion `iface != NULL' failed
Jan 31 14:23:00 milan NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): cleaning up...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): cleaning up...
Jan 31 14:23:00 milan NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 31 14:23:00 milan NetworkManager[1013]: <error> [1328016180.929334] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <error> [1328016180.929334] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill10 disappeared
Jan 31 14:23:00 milan NetworkManager[1013]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill10 disappeared
Jan 31 14:23:03 milan kernel: [55630.545382] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Jan 31 14:23:03 milan kernel: [55630.561073] cfg80211: Calling CRDA for country: US
Jan 31 14:23:03 milan kernel: [55630.561109] brcms_module_init: register returned 0
Jan 31 14:23:03 milan kernel: [55630.569663] cfg80211: Current regulatory domain intersected:
Jan 31 14:23:03 milan kernel: [55630.569666] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:23:03 milan kernel: [55630.569669] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:03 milan kernel: [55630.569670] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1700 mBm)
Jan 31 14:23:03 milan kernel: [55630.569672] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:03 milan kernel: [55630.569674] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:03 milan kernel: [55630.569676] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:03 milan NetworkManager[1013]: <info> found WiFi radio killswitch rfkill11 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy3/rfkill11) (driver (unknown))
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> found WiFi radio killswitch rfkill11 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy3/rfkill11) (driver (unknown))
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 6)
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 6)
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 14:23:03 milan kernel: [55630.622227] ieee80211 phy3: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 14:23:03 milan kernel: [55630.622237] ieee80211 phy3: brcms_ops_config: change power-save mode: false (implement)
Jan 31 14:23:03 milan kernel: [55630.622708] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:23:04 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:23:04 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 31 14:23:05 milan kernel: [55632.770659] ieee80211 phy3: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 31 14:23:05 milan kernel: [55632.770668] ieee80211 phy3: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 31 14:23:05 milan kernel: [55632.770673] ieee80211 phy3: changing basic rates failed: -22
Jan 31 14:23:05 milan kernel: [55632.770677] ieee80211 phy3: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 31 14:23:05 milan kernel: [55632.771246] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 31 14:23:05 milan kernel: [55632.771320] cfg80211: Calling CRDA for country: FR
Jan 31 14:23:05 milan kernel: [55632.775035] cfg80211: Regulatory domain changed to country: FR
Jan 31 14:23:05 milan kernel: [55632.775038] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:23:05 milan kernel: [55632.775041] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:05 milan kernel: [55632.775043] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:05 milan kernel: [55632.775046] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:05 milan kernel: [55632.775048] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 31 14:23:05 milan NetworkManager[1013]: <info> dhclient started with pid 7970
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> dhclient started with pid 7970
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 31 14:23:05 milan dhclient[7970]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 31 14:23:05 milan dhclient[7970]: Copyright 2004-2012 Internet Systems Consortium.
Jan 31 14:23:05 milan dhclient[7970]: All rights reserved.
Jan 31 14:23:05 milan dhclient[7970]: For info, please visit https://www.isc.org/software/dhcp/
Jan 31 14:23:05 milan dhclient[7970]:
Jan 31 14:23:05 milan NetworkManager[1013]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 31 14:23:05 milan NetworkManager[1013]: Copyright 2004-2012 Internet Systems Consortium.
Jan 31 14:23:05 milan NetworkManager[1013]: All rights reserved.
Jan 31 14:23:05 milan NetworkManager[1013]: For info, please visit https://www.isc.org/software/dhcp/
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 31 14:23:05 milan dhclient[7970]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:23:05 milan dhclient[7970]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:23:05 milan NetworkManager[1013]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:23:05 milan dhclient[7970]: Sending on Socket/fallback
Jan 31 14:23:05 milan NetworkManager[1013]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:23:05 milan NetworkManager[1013]: Sending on Socket/fallback
Jan 31 14:23:05 milan dhclient[7970]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 31 14:23:05 milan NetworkManager[1013]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 31 14:23:05 milan dhclient[7970]: DHCPACK from 10.92.72.1
Jan 31 14:23:05 milan NetworkManager[1013]: DHCPACK from 10.92.72.1
Jan 31 14:23:05 milan dhclient[7970]: bound to 10.92.72.73 -- renewal in 270367 seconds.
Jan 31 14:23:05 milan NetworkManager[1013]: bound to 10.92.72.73 -- renewal in 270367 seconds.
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 31 14:23:05 milan NetworkManager[1013]: <info> address 10.92.72.73
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> address 10.92.72.73
Jan 31 14:23:05 milan NetworkManager[1013]: <info> prefix 23 (255.255.254.0)
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> prefix 23 (255.255.254.0)
Jan 31 14:23:05 milan NetworkManager[1013]: <info> gateway 10.92.72.1
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> gateway 10.92.72.1
Jan 31 14:23:05 milan NetworkManager[1013]: <info> nameserver '83.145.66.194'
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> nameserver '83.145.66.194'
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 31 14:23:05 milan avahi-daemon[1014]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 31 14:23:05 milan kernel: [55633.069747] ieee80211 phy3: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 31 14:23:05 milan avahi-daemon[1014]: New relevant interface wlan0.IPv4 for mDNS.
Jan 31 14:23:05 milan avahi-daemon[1014]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 31 14:23:06 milan kernel: [55633.713448] cfg80211: Calling CRDA to update world regulatory domain
Jan 31 14:23:06 milan kernel: [55633.720018] cfg80211: World regulatory domain updated:
Jan 31 14:23:06 milan kernel: [55633.720023] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:23:06 milan kernel: [55633.720028] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan kernel: [55633.720033] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan kernel: [55633.720037] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan kernel: [55633.720041] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan kernel: [55633.720045] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan NetworkManager[1013]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 31 14:23:06 milan NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:44:95:4A (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:44:95:4A (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 31 14:23:06 milan NetworkManager[1013]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 31 14:23:06 milan NetworkManager[1013]: <info> Activation (wlan0) successful, device activated.
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) successful, device activated.
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 31 14:23:06 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 31 14:23:06 milan dbus[1022]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 31 14:23:06 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 31 14:23:06 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 14:23:06 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 14:23:06 milan systemd[1]: iscsi.service: control process exited, code=exited status=3
Jan 31 14:23:06 milan ntpd[1379]: Listen normally on 20 wlan0 10.92.72.73 UDP 123
Jan 31 14:23:06 milan ntpd[1379]: peers refreshed
Jan 31 14:23:07 milan dbus-daemon[1022]: Starting iscsi (via systemctl): Job failed. See system logs and 'systemctl status' for details.
Jan 31 14:23:07 milan systemd[1]: Unit iscsi.service entered failed state.
Jan 31 14:23:07 milan dbus-daemon[1022]: [FAILED]
Jan 31 14:23:07 milan nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/04-iscsi' exited with error status 1.
Jan 31 14:23:07 milan avahi-daemon[1014]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 31 14:23:07 milan dbus-daemon[1022]: Mounting other filesystems: [ OK ]
Jan 31 14:23:07 milan kernel: [55635.151396] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:23:08 milan ntpd[1379]: Listen normally on 21 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 31 14:23:08 milan ntpd[1379]: peers refreshed
Jan 31 14:23:12 milan kernel: [55640.456428] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:24:07 milan systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start.
Jan 31 14:26:26 milan kernel: [55833.980271] ieee80211 phy3: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 14:26:26 milan kernel: [55833.980283] ieee80211 phy3: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 31 14:26:26 milan kernel: [55833.980290] ieee80211 phy3: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 31 14:26:26 milan kernel: [55834.007629] cfg80211: Calling CRDA to update world regulatory domain
Jan 31 14:26:26 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 31 14:26:26 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 31 14:26:26 milan kernel: [55834.065238] cfg80211: World regulatory domain updated:
Jan 31 14:26:26 milan kernel: [55834.065243] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:26:26 milan kernel: [55834.065249] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan kernel: [55834.065253] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan kernel: [55834.065257] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan kernel: [55834.065261] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan kernel: [55834.065265] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:26:26 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:26:27 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 31 14:26:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 31 14:26:27 milan kernel: [55834.772512] ieee80211 phy3: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 31 14:26:27 milan kernel: [55834.772524] ieee80211 phy3: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 31 14:26:27 milan kernel: [55834.772530] ieee80211 phy3: changing basic rates failed: -22
Jan 31 14:26:27 milan kernel: [55834.772536] ieee80211 phy3: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 31 14:26:27 milan kernel: [55834.773331] cfg80211: Calling CRDA for country: FR
Jan 31 14:26:27 milan kernel: [55834.776703] cfg80211: Regulatory domain changed to country: FR
Jan 31 14:26:27 milan kernel: [55834.776706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:26:27 milan kernel: [55834.776708] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:26:27 milan kernel: [55834.776710] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:26:27 milan kernel: [55834.776712] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:26:27 milan kernel: [55834.776714] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 31 14:26:27 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:26:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:26:28 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 31 14:26:28 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 31 14:26:28 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 31 14:26:28 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 31 14:28:48 milan kernel: [55975.791174] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:33:13 milan kernel: [56239.795810] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:33:13 milan kernel: [56239.798070] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:35:54 milan kernel: [56400.617455] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:36:54 milan kernel: [56460.515509] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:42:37 milan kernel: [56802.479518] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:43:22 milan kernel: [56848.365976] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:44:28 milan kernel: [56913.311649] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:46:03 milan kernel: [57008.229073] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:46:03 milan kernel: [57008.229391] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:46:03 milan kernel: [57008.229718] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:46:28 milan kernel: [57033.637881] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:47:54 milan kernel: [57119.366135] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:47:54 milan kernel: [57119.366505] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:52:09 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 14:52:09 milan dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 14:52:09 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 14:52:09 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 14:53:48 milan kernel: [57473.187972] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:55:57 milan dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 31 14:55:57 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 31 14:55:57 milan dbus-daemon[1022]: Launching FprintObject
Jan 31 14:55:57 milan dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 31 14:55:57 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 31 14:55:57 milan dbus-daemon[1022]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Jan 31 14:55:57 milan dbus-daemon[1022]: ** Message: entering main loop
Jan 31 14:56:27 milan dbus-daemon[1022]: ** Message: No devices in use, exit
Jan 31 14:59:49 milan ntpd[1379]: 0.0.0.0 0613 03 spike_detect +0.677230 s
Jan 31 15:00:11 milan dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 15:00:11 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 15:00:11 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 15:00:11 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 15:00:27 milan ntpd[1379]: 0.0.0.0 061c 0c clock_step +0.676370 s
Jan 31 15:00:27 milan ntpd[1379]: 0.0.0.0 0615 05 clock_sync
Jan 31 15:00:28 milan ntpd[1379]: 0.0.0.0 c618 08 no_sys_peer
Jan 31 15:00:30 milan kernel: [57873.641506] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:00:35 milan kernel: [57878.632459] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:00:36 milan kernel: [57879.630671] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:00:36 milan kernel: [57879.631099] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:00:55 milan kernel: [57898.011877] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:13:39 milan kernel: [58660.775726] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:13:55 milan kernel: [58676.661720] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:13:55 milan kernel: [58676.662089] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:14:48 milan kernel: [58729.555724] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:20:35 milan kernel: [59076.565121] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:21:29 milan kernel: [59129.979685] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:24:14 milan kernel: [59294.662424] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:26:06 milan kernel: [59406.510930] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:30:55 milan kernel: [59694.891759] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:32:03 milan kernel: [59763.443175] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:32:39 milan kernel: [59798.796956] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:32:39 milan kernel: [59798.797822] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:40:55 milan kernel: [60293.850830] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:40:55 milan kernel: [60293.852614] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:41:39 milan kernel: [60337.859850] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:47:29 milan kernel: [60687.274961] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:47:29 milan kernel: [60687.275717] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:47:29 milan kernel: [60687.276391] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:48:39 milan kernel: [60757.133121] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
next prev parent reply other threads:[~2012-02-02 9:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-24 10:31 BCM4313 keeps disconnecting with brcmsmac and multiple APs Milan Bouchet-Valat
2012-01-27 8:46 ` Arend van Spriel
2012-01-27 10:19 ` Felix Fietkau
2012-01-27 10:08 ` Arend van Spriel
2012-01-27 10:26 ` Milan Bouchet-Valat
2012-01-27 11:37 ` Arend van Spriel
2012-01-31 13:57 ` Milan Bouchet-Valat
2012-01-31 14:44 ` Arend van Spriel
2012-01-31 14:57 ` Milan Bouchet-Valat
2012-02-02 9:35 ` Milan Bouchet-Valat [this message]
2012-01-31 13:36 ` Milan Bouchet-Valat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2106119310.135199.1328175351022.JavaMail.www@wsfrf1310 \
--to=nalimilan@club-internet.fr \
--cc=arend@broadcom.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).