* Adding a nanosecond timestamp to the beacon frame
@ 2013-01-02 19:58 Maik Jäkel
0 siblings, 0 replies; only message in thread
From: Maik Jäkel @ 2013-01-02 19:58 UTC (permalink / raw)
To: linux-wireless
Hey everyone,
I'm trying to add a timestamp with nanosecond resolution to my beacon frames. After searching through the code I cannot decide at which I place I have to add the timestamp...
My target device uses an Ralink Rt305x chipset but I thought that this modification should not be depending on the hardware it is running on. So my question is:
Where and how do I have to add the nanosecond timestamp?
Best regards and thanks in advance,
Maik Jäkel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-01-02 20:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-02 19:58 Adding a nanosecond timestamp to the beacon frame Maik Jäkel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).