From: Gerry Gavigan <gerry@gavigan.f9.co.uk>
To: Sujith Manoharan <sujith@msujith.org>
Cc: linux-wireless@vger.kernel.org
Subject: Re: ath9k problems on openSUSE 12.3
Date: Tue, 23 Apr 2013 10:28:26 +0100 [thread overview]
Message-ID: <2687000.szPz826eEU@linux-zd5t.site> (raw)
In-Reply-To: <20854.18866.135251.330099@gargle.gargle.HOWL>
On Tuesday 23 Apr 2013 14:13:30 Sujith Manoharan wrote:
> Gerry Gavigan wrote:
> > 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485
> > Wireless Network Adapter [168c:0032] (rev 01)
>
> As a first step, can you disable Power Save and see if the issue persists ?
> ("iw dev wlan# set power_save off" and verify that "iw wlan0 get power_save"
> shows "off").
Thank you
- turned power save off
- confirmed
- shut down
- restarted
- power save is on
problem persists
dmesg trace
[ 15.610198] wlan0: direct probe to 00:1f:33:7a:cf:b4 (try 3/3)
[ 15.811020] wlan0: authentication with 00:1f:33:7a:cf:b4 timed out
[ 15.931895] ------------[ cut here ]------------
[ 15.931944] WARNING: at
/home/abuild/rpmbuild/BUILD/kernel-
desktop-3.7.10/linux-3.7/drivers/net/wireless/ath/ath9k/hw.c:794
ar9003_get_pll_sqsum_dvc+0xa8/0xc0 [ath9k_hw]()
[ 15.931948] Hardware name: AOD270
[ 15.931952] Modules linked in: xt_tcpudp xt_pkttype xt_LOG xt_limit
af_packet bnep bluetooth ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6
ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle
nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4
nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter
ip6_tables x_tables cpufreq_conservative cpufreq_userspace
cpufreq_powersave acpi_cpufreq mperf coretemp iTCO_wdt
iTCO_vendor_support acer_wmi sparse_keymap snd_hda_codec_realtek
snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm
microcode snd_seq pcspkr uvcvideo serio_raw videobuf2_core videodev
videobuf2_vmalloc videobuf2_memops joydev i2c_i801 snd_timer sg
snd_seq_device lpc_ich mfd_core arc4 snd ath9k mac80211 ath9k_common
ath9k_hw rts_pstor(C) ath cfg80211 rfkill r8169 soundcore snd_page_alloc
ac wmi battery button autofs4 gma500_gfx drm_kms_helper drm i2c_algo_bit
thermal video processor thermal_sys scsi_dh_rdac scsi_dh_emc
scsi_dh_alua scsi_dh_hp_sw scsi_dh
[ 15.932067] Pid: 63, comm: kworker/u:2 Tainted: G C
3.7.10-1.1-desktop #1
[ 15.932071] Call Trace:
[ 15.932093] [<c0205779>] try_stack_unwind+0x199/0x1b0
[ 15.932110] [<c0204487>] dump_trace+0x47/0xf0
[ 15.932121] [<c02057db>] show_trace_log_lvl+0x4b/0x60
[ 15.932130] [<c0205808>] show_trace+0x18/0x20
[ 15.932141] [<c06fbeeb>] dump_stack+0x6d/0x72
[ 15.932151] [<c0238cb8>] warn_slowpath_common+0x78/0xb0
[ 15.932162] [<c0238d0b>] warn_slowpath_null+0x1b/0x20
[ 15.932185] [<f7c78448>] ar9003_get_pll_sqsum_dvc+0xa8/0xc0
[ath9k_hw]
[ 15.932215] [<f7b712b8>] ath_hw_pll_work+0x48/0xc0 [ath9k]
[ 15.932261] [<c02527dc>] process_one_work+0x10c/0x400
[ 15.932272] [<c0253e89>] worker_thread+0x119/0x3b0
[ 15.932282] [<c02584f2>] kthread+0x92/0xa0
[ 15.932294] [<c070dc67>] ret_from_kernel_thread+0x1b/0x28
[ 15.932304] [<c0258460>] kthread_create_on_node+0xd0/0xd0
[ 15.939555] DWARF2 unwinder stuck at kthread+0x0/0xa0
[ 15.939561]
[ 15.939565] Leftover inexact backtrace:
[ 15.939565]
[ 15.939577] ---[ end trace bf86f678b93882b1 ]---
should I
- turn power save off
- reinstall 3.7.10 (start again with openSUSE 12.3)?
Grateful people are helping, sorry if I'm being stupid
Gerry
next prev parent reply other threads:[~2013-04-23 9:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-22 12:30 ath9k problems on openSUSE 12.3 Gerry Gavigan
2013-04-22 17:30 ` Adrian Chadd
2013-04-22 17:31 ` Adrian Chadd
2013-04-22 23:35 ` Gerry Gavigan
2013-04-23 0:56 ` Adrian Chadd
2013-04-23 8:43 ` Sujith Manoharan
2013-04-23 9:28 ` Gerry Gavigan [this message]
2013-04-23 9:56 ` Sujith Manoharan
2013-04-24 9:50 ` Gerry Gavigan
2013-04-24 16:37 ` Sujith Manoharan
2013-05-01 8:35 ` Gerry Gavigan
2013-05-01 15:38 ` Adrian Chadd
2013-05-01 15:55 ` Gerry Gavigan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2687000.szPz826eEU@linux-zd5t.site \
--to=gerry@gavigan.f9.co.uk \
--cc=linux-wireless@vger.kernel.org \
--cc=sujith@msujith.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox