linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Subject: [PATCH rtw-next v2 11/14] wifi: rtw89: Add some definitions for USB
Date: Mon, 9 Jun 2025 22:31:24 +0300	[thread overview]
Message-ID: <28ee9b9e-639d-41bd-b233-a45b1fbb8c68@gmail.com> (raw)
In-Reply-To: <6fc81cc4-a4d1-4db9-ab60-c8976e0b3c27@gmail.com>

Add various register and bit definitions which will be used by the new
USB driver.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
 - Add Acked-by.
---
 drivers/net/wireless/realtek/rtw89/reg.h  | 29 +++++++++++++++++++++++
 drivers/net/wireless/realtek/rtw89/txrx.h |  1 +
 2 files changed, 30 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw89/reg.h b/drivers/net/wireless/realtek/rtw89/reg.h
index 9d9e1b02bfc7..a3b83b1a92eb 100644
--- a/drivers/net/wireless/realtek/rtw89/reg.h
+++ b/drivers/net/wireless/realtek/rtw89/reg.h
@@ -381,6 +381,18 @@
 #define B_AX_ACH1_BUSY BIT(9)
 #define B_AX_ACH0_BUSY BIT(8)
 
+#define R_AX_USB_ENDPOINT_0 0x1060
+#define B_AX_EP_IDX GENMASK(3, 0)
+#define R_AX_USB_ENDPOINT_2 0x1068
+#define NUMP 0x1
+#define R_AX_USB_HOST_REQUEST_2 0x1078
+#define B_AX_R_USBIO_MODE BIT(4)
+#define R_AX_USB3_MAC_NPI_CONFIG_INTF_0 0x1114
+#define B_AX_SSPHY_LFPS_FILTER BIT(31)
+#define R_AX_USB_WLAN0_1 0x1174
+#define B_AX_USBRX_RST BIT(9)
+#define B_AX_USBTX_RST BIT(8)
+
 #define R_AX_PCIE_DBG_CTRL 0x11C0
 #define B_AX_DBG_DUMMY_MASK GENMASK(23, 16)
 #define B_AX_PCIE_DBG_SEL_MASK GENMASK(15, 13)
@@ -460,6 +472,17 @@
 #define R_AX_WP_PAGE_CTRL2_V1 0x17A4
 #define R_AX_WP_PAGE_INFO1_V1 0x17A8
 
+#define R_AX_USB_ENDPOINT_0_V1 0x5060
+#define B_AX_EP_IDX_V1 GENMASK(3, 0)
+#define R_AX_USB_ENDPOINT_2_V1 0x5068
+#define R_AX_USB_HOST_REQUEST_2_V1 0x5078
+#define B_AX_R_USBIO_MODE_V1 BIT(4)
+#define R_AX_USB3_MAC_NPI_CONFIG_INTF_0_V1 0x5114
+#define B_AX_SSPHY_LFPS_FILTER_V1 BIT(31)
+#define R_AX_USB_WLAN0_1_V1 0x5174
+#define B_AX_USBRX_RST_V1 BIT(9)
+#define B_AX_USBTX_RST_V1 BIT(8)
+
 #define R_AX_H2CREG_DATA0_V1 0x7140
 #define R_AX_H2CREG_DATA1_V1 0x7144
 #define R_AX_H2CREG_DATA2_V1 0x7148
@@ -1026,6 +1049,12 @@
 #define B_AX_DISPATCHER_INTN_SEL_MASK GENMASK(7, 4)
 #define B_AX_DISPATCHER_CH_SEL_MASK GENMASK(3, 0)
 
+#define R_AX_RXDMA_SETTING 0x8908
+#define B_AX_BULK_SIZE GENMASK(1, 0)
+#define USB11_BULKSIZE 0x2
+#define USB2_BULKSIZE 0x1
+#define USB3_BULKSIZE 0x0
+
 #define R_AX_RX_FUNCTION_STOP 0x8920
 #define B_AX_HDR_RX_STOP BIT(0)
 
diff --git a/drivers/net/wireless/realtek/rtw89/txrx.h b/drivers/net/wireless/realtek/rtw89/txrx.h
index 94f27a9ee9f7..ec01bfc363da 100644
--- a/drivers/net/wireless/realtek/rtw89/txrx.h
+++ b/drivers/net/wireless/realtek/rtw89/txrx.h
@@ -73,6 +73,7 @@ static inline u8 rtw89_get_data_nss(struct rtw89_dev *rtwdev, u16 hw_rate)
 #define RTW89_TXWD_BODY0_FW_DL BIT(20)
 #define RTW89_TXWD_BODY0_CHANNEL_DMA GENMASK(19, 16)
 #define RTW89_TXWD_BODY0_HDR_LLC_LEN GENMASK(15, 11)
+#define RTW89_TXWD_BODY0_STF_MODE BIT(10)
 #define RTW89_TXWD_BODY0_WD_PAGE BIT(7)
 #define RTW89_TXWD_BODY0_HW_AMSDU BIT(5)
 #define RTW89_TXWD_BODY0_HW_SSN_SEL GENMASK(3, 2)
-- 
2.49.0


  parent reply	other threads:[~2025-06-09 19:31 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-09 19:22 [PATCH rtw-next v2 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
2025-06-09 19:23 ` [PATCH rtw-next v2 01/14] wifi: rtw89: 8851b: Accept USB devices and load their MAC address Bitterblue Smith
2025-06-09 19:24 ` [PATCH rtw-next v2 02/14] wifi: rtw89: Make dle_mem in rtw89_chip_info an array Bitterblue Smith
2025-06-16  1:15   ` Ping-Ke Shih
2025-06-09 19:25 ` [PATCH rtw-next v2 03/14] wifi: rtw89: Make hfc_param_ini " Bitterblue Smith
2025-06-16  1:26   ` Ping-Ke Shih
2025-06-16 16:55     ` Bitterblue Smith
2025-06-17  0:19       ` Ping-Ke Shih
2025-06-09 19:26 ` [PATCH rtw-next v2 04/14] wifi: rtw89: Add rtw8851b_dle_mem_usb{2,3} Bitterblue Smith
2025-06-16  1:28   ` Ping-Ke Shih
2025-06-09 19:27 ` [PATCH rtw-next v2 05/14] wifi: rtw89: Add rtw8851b_hfc_param_ini_usb Bitterblue Smith
2025-06-16  1:32   ` Ping-Ke Shih
2025-06-09 19:28 ` [PATCH rtw-next v2 06/14] wifi: rtw89: Disable deep power saving for USB/SDIO Bitterblue Smith
2025-06-16  1:42   ` Ping-Ke Shih
2025-06-18 11:05     ` Bitterblue Smith
2025-06-09 19:28 ` [PATCH rtw-next v2 07/14] wifi: rtw89: Add extra TX headroom for USB Bitterblue Smith
2025-06-09 19:29 ` [PATCH rtw-next v2 08/14] wifi: rtw89: Hide some errors when the device is unplugged Bitterblue Smith
2025-06-09 19:30 ` [PATCH rtw-next v2 09/14] wifi: rtw89: 8851b: Modify rtw8851b_pwr_{on,off}_func() for USB Bitterblue Smith
2025-06-10 14:11   ` kernel test robot
2025-06-16  1:51   ` Ping-Ke Shih
2025-06-18 13:53     ` Bitterblue Smith
2025-06-09 19:30 ` [PATCH rtw-next v2 10/14] wifi: rtw89: Fix rtw89_mac_power_switch() " Bitterblue Smith
2025-06-16  2:21   ` Ping-Ke Shih
2025-06-16  9:14   ` Ping-Ke Shih
2025-06-09 19:31 ` Bitterblue Smith [this message]
2025-06-09 19:32 ` [PATCH rtw-next v2 12/14] wifi: rtw89: Add usb.{c,h} Bitterblue Smith
2025-06-16  3:10   ` Ping-Ke Shih
2025-06-18 11:06     ` Bitterblue Smith
2025-06-09 19:33 ` [PATCH rtw-next v2 13/14] wifi: rtw89: Add rtw8851bu.c Bitterblue Smith
2025-06-16  3:11   ` Ping-Ke Shih
2025-06-09 19:34 ` [PATCH rtw-next v2 14/14] wifi: rtw89: Enable the new USB modules Bitterblue Smith
2025-06-10 11:55   ` kernel test robot
2025-06-10 13:33     ` Bitterblue Smith
2025-06-11  0:32       ` Ping-Ke Shih
2025-06-11  0:33         ` Ping-Ke Shih
2025-06-11 12:37         ` Bitterblue Smith
2025-06-12  1:27           ` Ping-Ke Shih
2025-06-16  3:15             ` Ping-Ke Shih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=28ee9b9e-639d-41bd-b233-a45b1fbb8c68@gmail.com \
    --to=rtl8821cerfe2@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=pkshih@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).