Linux wireless drivers development
 help / color / mirror / Atom feed
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: Ping-Ke Shih <pkshih@realtek.com>, Luka Gejak <luka.gejak@linux.dev>
Subject: [PATCH rtw-next v2 2/3] wifi: rtw88: 8723b: Read the package type from efuse
Date: Tue, 20 Oct 2026 23:51:49 +0300	[thread overview]
Message-ID: <2d1f9c05-4837-4c62-ba27-4275d2cc5d0c@gmail.com> (raw)
In-Reply-To: <8e47daa4-538d-4e0a-84f9-fd4e91613ff8@gmail.com>

Some chip package types need different parts of the RF initialisation
table, so read the package type from efuse.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
v2:
 - Get the byte from the efuse physical map stored in RAM instead of
   reading it again from the chip.
 - Use macros for the address and the mask.
 - Read only the package type. The chip variant is now in patch 3.
---
 drivers/net/wireless/realtek/rtw88/rtw8723b.c | 29 +++++++++++++++++++
 drivers/net/wireless/realtek/rtw88/rtw8723b.h | 11 +++++++
 2 files changed, 40 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723b.c b/drivers/net/wireless/realtek/rtw88/rtw8723b.c
index 0179f09140ef..f550c8708e01 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8723b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723b.c
@@ -2349,6 +2349,33 @@ static void rtw8723b_fill_txdesc_checksum(struct rtw_dev *rtwdev,
 	fill_txdesc_checksum_common(txdesc, 16);
 }
 
+static void rtw8723b_read_package_type(struct rtw_dev *rtwdev, u8 *phy_map)
+{
+	struct rtw_hal *hal = &rtwdev->hal;
+	u8 val_1fb, package;
+
+	val_1fb = phy_map[RTW8723B_EFUSE_PACKAGE_TYPE];
+	package = u8_get_bits(val_1fb, RTW8723B_PACKAGE_TYPE_MASK);
+
+	switch (package) {
+	case 0x4:
+		hal->pkg_type = RTW8723B_PACKAGE_TFBGA79;
+		break;
+	case 0x5:
+		hal->pkg_type = RTW8723B_PACKAGE_TFBGA90;
+		break;
+	case 0x6:
+		hal->pkg_type = RTW8723B_PACKAGE_QFN68;
+		break;
+	case 0x7:
+		hal->pkg_type = RTW8723B_PACKAGE_TFBGA80;
+		break;
+	default:
+		hal->pkg_type = RTW8723B_PACKAGE_DEFAULT;
+		break;
+	}
+}
+
 static int rtw8723b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map, u8 *phy_map)
 {
 	struct rtw_efuse *efuse = &rtwdev->efuse;
@@ -2374,6 +2401,8 @@ static int rtw8723b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map, u8 *phy_map)
 	efuse->hw_cap.bw = BIT(RTW_CHANNEL_WIDTH_20) |
 			   BIT(RTW_CHANNEL_WIDTH_40);
 
+	rtw8723b_read_package_type(rtwdev, phy_map);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723b.h b/drivers/net/wireless/realtek/rtw88/rtw8723b.h
index cf93b93ede81..f1eaf7ab2a81 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8723b.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723b.h
@@ -9,6 +9,17 @@
 
 #include "rtw8723x.h"
 
+enum rtw8723b_package_type {
+	RTW8723B_PACKAGE_DEFAULT,
+	RTW8723B_PACKAGE_QFN68,
+	RTW8723B_PACKAGE_TFBGA90,
+	RTW8723B_PACKAGE_TFBGA80,
+	RTW8723B_PACKAGE_TFBGA79,
+};
+
+#define RTW8723B_EFUSE_PACKAGE_TYPE	0x1fb
+#define RTW8723B_PACKAGE_TYPE_MASK	GENMASK(2, 0)
+
 extern const struct rtw_chip_info rtw8723b_hw_spec;
 
 #endif
-- 
2.55.0


  reply	other threads:[~2026-10-20 20:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-20 20:50 [PATCH rtw-next v2 1/3] wifi: rtw88: Pass the physical map to the read_efuse chip op Bitterblue Smith
2026-10-20 20:51 ` Bitterblue Smith [this message]
2026-10-21  3:42   ` [PATCH rtw-next v2 2/3] wifi: rtw88: 8723b: Read the package type from efuse Ping-Ke Shih
2026-10-21  4:41   ` Luka Gejak
2026-10-20 20:53 ` [PATCH rtw-next v2 3/3] wifi: rtw88: 8723b: Read the chip variant " Bitterblue Smith
2026-10-21  3:45   ` Ping-Ke Shih
2026-10-21  4:42   ` Luka Gejak
2026-10-21  3:39 ` [PATCH rtw-next v2 1/3] wifi: rtw88: Pass the physical map to the read_efuse chip op Ping-Ke Shih
2026-10-21  4:41 ` Luka Gejak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2d1f9c05-4837-4c62-ba27-4275d2cc5d0c@gmail.com \
    --to=rtl8821cerfe2@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luka.gejak@linux.dev \
    --cc=pkshih@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox