From: "Nick Kossifidis" <mickflemm@gmail.com>
To: "Bob Copeland" <me@bobcopeland.com>
Cc: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org,
linville@tuxdriver.com, hch@infradead.org
Subject: Re: [PATCH] ath5k: set pcie flag before calling wakeup
Date: Mon, 25 Feb 2008 06:30:06 +0200 [thread overview]
Message-ID: <40f31dec0802242030g1d1ea50dq3abaefbed67de1c1@mail.gmail.com> (raw)
In-Reply-To: <20080225013345.GA8833@hash.localnet>
2008/2/25, Bob Copeland <me@bobcopeland.com>:
> From bd98f2fb1e651dd942a7822e25b73e735b026b6e Mon Sep 17 00:00:00 2001
> From: Bob Copeland <me@bobcopeland.com>
> Date: Sun, 24 Feb 2008 10:30:50 -0500
> Subject: [PATCH] ath5k: set pcie flag before calling wakeup
>
> In ath5k_hw_nic_wakeup we do not reset the pci unit for pcie devices.
> However, we didn't mark devices as pcie until after the first call to
> wakeup causing such devices to hang.
>
> Changes-licensed-under: ISC
> Signed-off-by: Bob Copeland <me@bobcopeland.com>
> ---
>
> Fixed whitespace and bracing issues. Also moved the comment about
> getting MAC/PHY revisions back where it was originally since my moving
> it didn't make any sense.
>
> drivers/net/wireless/ath5k/hw.c | 18 +++++++++---------
> 1 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
> index adcce6f..1888b8d 100644
> --- a/drivers/net/wireless/ath5k/hw.c
> +++ b/drivers/net/wireless/ath5k/hw.c
> @@ -178,13 +178,21 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
> else if (ah->ah_version <= AR5K_AR5211)
> ah->ah_proc_rx_desc = ath5k_hw_proc_old_rx_status;
>
> + srev = ath5k_hw_reg_read(ah, AR5K_SREV);
> +
> + /* Identify PCI-E cards */
> + if ((srev >= AR5K_SREV_VER_AR2424 && srev <= AR5K_SREV_VER_AR5424) ||
> + srev >= AR5K_SREV_VER_AR5416)
> + ah->ah_pcie = true;
> + else
> + ah->ah_pcie = false;
> +
> /* Bring device out of sleep and reset it's units */
> ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true);
> if (ret)
> goto err_free;
>
> /* Get MAC, PHY and RADIO revisions */
> - srev = ath5k_hw_reg_read(ah, AR5K_SREV);
> ah->ah_mac_srev = srev;
> ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
> ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
> @@ -214,14 +222,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
> ah->ah_single_chip = false;
> }
>
> - /* Identify PCI-E cards */
> - if((srev >= AR5K_SREV_VER_AR2424 && srev <= AR5K_SREV_VER_AR5424) ||
> - srev >= AR5K_SREV_VER_AR5416) {
> - ah->ah_pcie = true;
> - } else {
> - ah->ah_pcie = false;
> - }
> -
> /* Single chip radio */
> if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
> ah->ah_radio_2ghz_revision = 0;
> --
> 1.5.4.2.182.gb3092
>
>
Thanx a lot ;-)
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick
prev parent reply other threads:[~2008-02-25 4:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-25 1:33 [PATCH] ath5k: set pcie flag before calling wakeup Bob Copeland
2008-02-25 4:30 ` Nick Kossifidis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40f31dec0802242030g1d1ea50dq3abaefbed67de1c1@mail.gmail.com \
--to=mickflemm@gmail.com \
--cc=ath5k-devel@lists.ath5k.org \
--cc=hch@infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=me@bobcopeland.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox