From: "Nick Kossifidis" <mickflemm@gmail.com>
To: "Andrey Yurovsky" <andrey@cozybit.com>
Cc: linux-wireless@vger.kernel.org, ath5k-devel@lists.ath5k.org
Subject: Re: [PATCH] ath5k: add Mesh Point support
Date: Fri, 18 Jul 2008 20:59:03 +0300 [thread overview]
Message-ID: <40f31dec0807181059s11235717j4fa3fbf85e704fc@mail.gmail.com> (raw)
In-Reply-To: <487fa7a8.14da600a.1aae.48b1@mx.google.com>
2008/7/17 Andrey Yurovsky <andrey@cozybit.com>:
> This enables draft-802.11s Mesh Point operation. For that we need mesh
> beaconing. Tested with AR5212/AR5213 PCI card against Zydas and b43 mesh
> nodes.
>
> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
> ---
> diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
> index 217d506..6d9f4e1 100644
> --- a/drivers/net/wireless/ath5k/base.c
> +++ b/drivers/net/wireless/ath5k/base.c
> @@ -1425,7 +1425,8 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
> ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
> if (ret)
> return ret;
> - if (sc->opmode == IEEE80211_IF_TYPE_AP) {
> + if (sc->opmode == IEEE80211_IF_TYPE_AP ||
> + sc->opmode == IEEE80211_IF_TYPE_MESH_POINT) {
> /*
> * Always burst out beacon and CAB traffic
> * (aifs = cwmin = cwmax = 0)
> @@ -2911,6 +2912,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
> if (sc->opmode != IEEE80211_IF_TYPE_STA)
> rfilt |= AR5K_RX_FILTER_PROBEREQ;
> if (sc->opmode != IEEE80211_IF_TYPE_AP &&
> + sc->opmode != IEEE80211_IF_TYPE_MESH_POINT &&
> test_bit(ATH_STAT_PROMISC, sc->status))
> rfilt |= AR5K_RX_FILTER_PROM;
> if (sc->opmode == IEEE80211_IF_TYPE_STA ||
> diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
> index c6d12c5..8854820 100644
> --- a/drivers/net/wireless/ath5k/hw.c
> +++ b/drivers/net/wireless/ath5k/hw.c
> @@ -2326,6 +2326,7 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah)
> break;
>
> case IEEE80211_IF_TYPE_AP:
> + case IEEE80211_IF_TYPE_MESH_POINT:
> pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
> (ah->ah_version == AR5K_AR5210 ?
> AR5K_STA_ID1_NO_PSPOLL : 0);
>
>
Thanks ;-)
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick
next prev parent reply other threads:[~2008-07-18 17:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-17 20:12 [PATCH] ath5k: add Mesh Point support Andrey Yurovsky
2008-07-18 17:59 ` Nick Kossifidis [this message]
2008-07-28 9:09 ` [ath5k-devel] " YanBo
2008-07-28 10:24 ` Steve Brown
2008-07-28 12:10 ` Johannes Berg
2008-07-28 12:45 ` Steve Brown
2008-07-30 19:27 ` Luis Carlos Cobo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40f31dec0807181059s11235717j4fa3fbf85e704fc@mail.gmail.com \
--to=mickflemm@gmail.com \
--cc=andrey@cozybit.com \
--cc=ath5k-devel@lists.ath5k.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).