From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Ma Jun <Jun.Ma2@amd.com>
Cc: amd-gfx@lists.freedesktop.org, lenb@kernel.org,
johannes@sipsolutions.net, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
alexander.deucher@amd.com, Lijo.Lazar@amd.com,
mario.limonciello@amd.com, majun@amd.com,
Netdev <netdev@vger.kernel.org>,
linux-wireless@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
linux-doc@vger.kernel.org, platform-driver-x86@vger.kernel.org,
Evan Quan <quanliangl@hotmail.com>
Subject: Re: [PATCH v12 8/9] drm/amd/pm: enable Wifi RFI mitigation feature support for SMU13.0.0
Date: Tue, 17 Oct 2023 11:55:52 +0300 (EEST) [thread overview]
Message-ID: <4477dd8b-bb52-f65-1de6-13dd4186fd38@linux.intel.com> (raw)
In-Reply-To: <20231017025358.1773598-9-Jun.Ma2@amd.com>
On Tue, 17 Oct 2023, Ma Jun wrote:
> From: Evan Quan <quanliangl@hotmail.com>
>
> Fulfill the SMU13.0.0 support for Wifi RFI mitigation feature.
>
> Signed-off-by: Evan Quan <quanliangl@hotmail.com>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
> --
> v10->v11:
> - downgrade the prompt level on message failure(Lijo)
> ---
> drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h | 3 +
> drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h | 3 +-
> drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h | 3 +
> .../gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c | 9 +++
> .../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 60 +++++++++++++++++++
> 5 files changed, 77 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h
> index d396a18fe0f3..6f88c352b53e 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h
> +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h
> @@ -325,6 +325,7 @@ enum smu_table_id
> SMU_TABLE_PACE,
> SMU_TABLE_ECCINFO,
> SMU_TABLE_COMBO_PPTABLE,
> + SMU_TABLE_WIFIBAND,
> SMU_TABLE_COUNT,
> };
>
> @@ -1501,6 +1502,8 @@ enum smu_baco_seq {
> __dst_size); \
> })
>
> +#define HZ_IN_MHZ 1000000U
Don't add generic conversion constants like this into driver specific
code. Use the one from include/linux/units.h,
> +
> #if !defined(SWSMU_CODE_LAYER_L2) && !defined(SWSMU_CODE_LAYER_L3) && !defined(SWSMU_CODE_LAYER_L4)
> int smu_get_power_limit(void *handle,
> uint32_t *limit,
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h
> index 297b70b9388f..5bbb60289a79 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h
> +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h
> @@ -245,7 +245,8 @@
> __SMU_DUMMY_MAP(AllowGpo), \
> __SMU_DUMMY_MAP(Mode2Reset), \
> __SMU_DUMMY_MAP(RequestI2cTransaction), \
> - __SMU_DUMMY_MAP(GetMetricsTable),
> + __SMU_DUMMY_MAP(GetMetricsTable), \
> + __SMU_DUMMY_MAP(EnableUCLKShadow),
>
> #undef __SMU_DUMMY_MAP
> #define __SMU_DUMMY_MAP(type) SMU_MSG_##type
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h
> index 355c156d871a..dd70b56aa71e 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h
> +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0.h
> @@ -299,5 +299,8 @@ int smu_v13_0_update_pcie_parameters(struct smu_context *smu,
> uint32_t pcie_gen_cap,
> uint32_t pcie_width_cap);
>
> +int smu_v13_0_enable_uclk_shadow(struct smu_context *smu,
> + bool enablement);
> +
> #endif
> #endif
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
> index 9b62b45ebb7f..6a5cb582aa92 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
> @@ -2472,3 +2472,12 @@ int smu_v13_0_update_pcie_parameters(struct smu_context *smu,
>
> return 0;
> }
> +
> +int smu_v13_0_enable_uclk_shadow(struct smu_context *smu,
> + bool enablement)
> +{
> + return smu_cmn_send_smc_msg_with_param(smu,
> + SMU_MSG_EnableUCLKShadow,
> + enablement,
> + NULL);
> +}
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> index 0fb6be11a0cc..08ab19559c7b 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> @@ -154,6 +154,7 @@ static struct cmn2asic_msg_mapping smu_v13_0_0_message_map[SMU_MSG_MAX_COUNT] =
> MSG_MAP(AllowGpo, PPSMC_MSG_SetGpoAllow, 0),
> MSG_MAP(AllowIHHostInterrupt, PPSMC_MSG_AllowIHHostInterrupt, 0),
> MSG_MAP(ReenableAcDcInterrupt, PPSMC_MSG_ReenableAcDcInterrupt, 0),
> + MSG_MAP(EnableUCLKShadow, PPSMC_MSG_EnableUCLKShadow, 0),
> };
>
> static struct cmn2asic_mapping smu_v13_0_0_clk_map[SMU_CLK_COUNT] = {
> @@ -237,6 +238,7 @@ static struct cmn2asic_mapping smu_v13_0_0_table_map[SMU_TABLE_COUNT] = {
> TAB_MAP(I2C_COMMANDS),
> TAB_MAP(ECCINFO),
> TAB_MAP(OVERDRIVE),
> + TAB_MAP(WIFIBAND),
> };
>
> static struct cmn2asic_mapping smu_v13_0_0_pwr_src_map[SMU_POWER_SOURCE_COUNT] = {
> @@ -496,6 +498,9 @@ static int smu_v13_0_0_tables_init(struct smu_context *smu)
> PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM);
> SMU_TABLE_INIT(tables, SMU_TABLE_ECCINFO, sizeof(EccInfoTable_t),
> PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM);
> + SMU_TABLE_INIT(tables, SMU_TABLE_WIFIBAND,
> + sizeof(WifiBandEntryTable_t), PAGE_SIZE,
> + AMDGPU_GEM_DOMAIN_VRAM);
>
> smu_table->metrics_table = kzalloc(sizeof(SmuMetricsExternal_t), GFP_KERNEL);
> if (!smu_table->metrics_table)
> @@ -2607,6 +2612,58 @@ static ssize_t smu_v13_0_0_get_ecc_info(struct smu_context *smu,
> return ret;
> }
>
> +static bool smu_v13_0_0_wbrf_support_check(struct smu_context *smu)
> +{
> + struct amdgpu_device *adev = smu->adev;
> +
> + switch (adev->ip_versions[MP1_HWIP][0]) {
> + case IP_VERSION(13, 0, 0):
> + return smu->smc_fw_version >= 0x004e6300;
> + case IP_VERSION(13, 0, 10):
> + return smu->smc_fw_version >= 0x00503300;
> + default:
> + return false;
> + }
> +}
> +
> +static int smu_v13_0_0_set_wbrf_exclusion_ranges(struct smu_context *smu,
> + struct freq_band_range *exclusion_ranges)
> +{
> + WifiBandEntryTable_t wifi_bands;
> + int valid_entries = 0;
> + int ret, i;
> +
> + memset(&wifi_bands, 0, sizeof(wifi_bands));
> + for (i = 0; i < ARRAY_SIZE(wifi_bands.WifiBandEntry); i++) {
> + if (!exclusion_ranges[i].start &&
> + !exclusion_ranges[i].end)
> + break;
> +
> + /* PMFW expects the inputs to be in Mhz unit */
> + wifi_bands.WifiBandEntry[valid_entries].LowFreq =
> + DIV_ROUND_DOWN_ULL(exclusion_ranges[i].start, HZ_IN_MHZ);
> + wifi_bands.WifiBandEntry[valid_entries++].HighFreq =
> + DIV_ROUND_UP_ULL(exclusion_ranges[i].end, HZ_IN_MHZ);
> + }
> + wifi_bands.WifiBandEntryNum = valid_entries;
> +
> + /*
> + * Per confirm with PMFW team, WifiBandEntryNum = 0
> + * is a valid setting. So, there should be no direct
> + * return on that.
> + */
> +
> + ret = smu_cmn_update_table(smu,
> + SMU_TABLE_WIFIBAND,
> + 0,
> + (void *)(&wifi_bands),
Explicit casting to void * is never needed, drop it and the parenthesis.
This probably fits to one line after that and certainly to less lines than
now.
> + true);
> + if (ret)
> + dev_warn(smu->adev->dev, "Failed to set wifiband!");
> +
> + return ret;
> +}
> +
> static const struct pptable_funcs smu_v13_0_0_ppt_funcs = {
> .get_allowed_feature_mask = smu_v13_0_0_get_allowed_feature_mask,
> .set_default_dpm_table = smu_v13_0_0_set_default_dpm_table,
> @@ -2686,6 +2743,9 @@ static const struct pptable_funcs smu_v13_0_0_ppt_funcs = {
> .send_hbm_bad_channel_flag = smu_v13_0_0_send_bad_mem_channel_flag,
> .gpo_control = smu_v13_0_gpo_control,
> .get_ecc_info = smu_v13_0_0_get_ecc_info,
> + .is_asic_wbrf_supported = smu_v13_0_0_wbrf_support_check,
> + .enable_uclk_shadow = smu_v13_0_enable_uclk_shadow,
> + .set_wbrf_exclusion_ranges = smu_v13_0_0_set_wbrf_exclusion_ranges,
> };
>
> void smu_v13_0_0_set_ppt_funcs(struct smu_context *smu)
>
--
i.
next prev parent reply other threads:[~2023-10-17 8:57 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-17 2:53 [PATCH v12 0/9] Enable Wifi RFI interference mitigation feature support Ma Jun
2023-10-17 2:53 ` [PATCH v12 1/9] Documentation/driver-api: Add document about WBRF mechanism Ma Jun
2023-10-17 9:20 ` Ilpo Järvinen
2023-10-18 2:24 ` Ma, Jun
2023-11-20 10:35 ` Hans de Goede
2023-10-17 2:53 ` [PATCH v12 2/9] platform/x86/amd: Add support for AMD ACPI based Wifi band RFI mitigation feature Ma Jun
2023-10-17 8:36 ` Ilpo Järvinen
2023-11-20 10:47 ` Hans de Goede
2023-10-17 2:53 ` [PATCH v12 3/9] cfg80211: expose nl80211_chan_width_to_mhz for wide sharing Ma Jun
2023-10-17 9:14 ` Ilpo Järvinen
2023-10-17 2:53 ` [PATCH v12 4/9] wifi: mac80211: Add support for WBRF features Ma Jun
2023-10-17 9:11 ` Ilpo Järvinen
2023-10-17 9:12 ` Ilpo Järvinen
2023-10-17 2:53 ` [PATCH v12 5/9] drm/amd/pm: update driver_if and ppsmc headers for coming wbrf feature Ma Jun
2023-10-17 2:53 ` [PATCH v12 6/9] drm/amd/pm: setup the framework to support Wifi RFI mitigation feature Ma Jun
2023-10-17 8:51 ` Ilpo Järvinen
2023-10-17 2:53 ` [PATCH v12 7/9] drm/amd/pm: add flood detection for wbrf events Ma Jun
2023-10-17 2:53 ` [PATCH v12 8/9] drm/amd/pm: enable Wifi RFI mitigation feature support for SMU13.0.0 Ma Jun
2023-10-17 8:55 ` Ilpo Järvinen [this message]
2023-10-17 2:53 ` [PATCH v12 9/9] drm/amd/pm: enable Wifi RFI mitigation feature support for SMU13.0.7 Ma Jun
2023-10-17 9:03 ` Ilpo Järvinen
2023-10-19 6:17 ` [PATCH v12 0/9] Enable Wifi RFI interference mitigation feature support Ma, Jun
2023-11-20 10:54 ` Hans de Goede
2023-11-22 8:39 ` Ma, Jun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4477dd8b-bb52-f65-1de6-13dd4186fd38@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Jun.Ma2@amd.com \
--cc=Lijo.Lazar@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=johannes@sipsolutions.net \
--cc=kuba@kernel.org \
--cc=lenb@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=majun@amd.com \
--cc=mario.limonciello@amd.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=quanliangl@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).