* Locking problem in bcm43xx-mac80211
@ 2007-06-01 17:55 Larry Finger
2007-06-01 20:38 ` Michael Buesch
0 siblings, 1 reply; 2+ messages in thread
From: Larry Finger @ 2007-06-01 17:55 UTC (permalink / raw)
To: Broadcom Linux; +Cc: wireless, Michael Buesch
When a 'modprobe -r bcm43xx-mac80211' command is given with the interface up, the following kernel
BUG is issued:
ssb: Switching to ChipCommon core, index 0
ssb: Switching to IEEE 802.11 core, index 1
bcm43xx_mac80211: Radio turned off
BUG: sleeping function called from invalid context at kernel/mutex.c:86
in_atomic():1, irqs_disabled():0
2 locks held by modprobe/6053:
#0: (rtnl_mutex){--..}, at: [<ffffffff803f0d63>] mutex_lock+0x2a/0x2e
#1: (&local->sta_lock){-+..}, at: [<ffffffff882622a5>] sta_info_flush+0x20/0x77 [mac80211]
Call Trace:
[<ffffffff8024c830>] debug_show_held_locks+0x22/0x24
[<ffffffff8022ab32>] __might_sleep+0xd9/0xdb
[<ffffffff803f0d56>] mutex_lock+0x1d/0x2e
[<ffffffff8829dc3a>] :bcm43xx_mac80211:bcm43xx_dev_set_key+0xc3/0x2e4
[<ffffffff8028eea5>] __kmalloc+0x17e/0x18e
[<ffffffff882621bf>] :mac80211:sta_info_free+0xec/0x1b2
[<ffffffff882622cf>] :mac80211:sta_info_flush+0x4a/0x77
[<ffffffff8826c5bf>] :mac80211:ieee80211_if_reinit+0x29c/0x2c7
[<ffffffff80398de0>] unregister_netdevice+0x17e/0x201
[<ffffffff8826bd06>] :mac80211:__ieee80211_if_del+0x1d/0x21
[<ffffffff8825a985>] :mac80211:ieee80211_unregister_hw+0xbc/0x216
[<ffffffff8829cf95>] :bcm43xx_mac80211:bcm43xx_remove+0x53/0x7f
[<ffffffff8828f23b>] :ssb:ssb_device_remove+0x2b/0x39
[<ffffffff8036cab5>] __device_release_driver+0x93/0xb3
[<ffffffff8036d03d>] driver_detach+0xdb/0x11e
[<ffffffff8036c529>] bus_remove_driver+0x75/0x97
[<ffffffff8036d0b1>] driver_unregister+0x9/0xb
[<ffffffff8828eddb>] :ssb:ssb_driver_unregister+0xd/0xf
[<ffffffff882b0964>] :bcm43xx_mac80211:bcm43xx_exit+0x10/0x23
[<ffffffff80257a82>] sys_delete_module+0x1b5/0x1e6
[<ffffffff8024db6a>] trace_hardirqs_on+0x11c/0x147
[<ffffffff803f1dcb>] trace_hardirqs_on_thunk+0x35/0x37
[<ffffffff80209f9e>] system_call+0x7e/0x83
WARNING: at kernel/mutex.c:132 __mutex_lock_common()
Call Trace:
[<ffffffff803f0b23>] __mutex_lock_slowpath+0x6a/0x280
[<ffffffff8020b5f3>] dump_stack+0x15/0x17
[<ffffffff803f0d63>] mutex_lock+0x2a/0x2e
[<ffffffff8829dc3a>] :bcm43xx_mac80211:bcm43xx_dev_set_key+0xc3/0x2e4
[<ffffffff8028eea5>] __kmalloc+0x17e/0x18e
[<ffffffff882621bf>] :mac80211:sta_info_free+0xec/0x1b2
[<ffffffff882622cf>] :mac80211:sta_info_flush+0x4a/0x77
[<ffffffff8826c5bf>] :mac80211:ieee80211_if_reinit+0x29c/0x2c7
[<ffffffff80398de0>] unregister_netdevice+0x17e/0x201
[<ffffffff8826bd06>] :mac80211:__ieee80211_if_del+0x1d/0x21
[<ffffffff8825a985>] :mac80211:ieee80211_unregister_hw+0xbc/0x216
[<ffffffff8829cf95>] :bcm43xx_mac80211:bcm43xx_remove+0x53/0x7f
[<ffffffff8828f23b>] :ssb:ssb_device_remove+0x2b/0x39
[<ffffffff8036cab5>] __device_release_driver+0x93/0xb3
[<ffffffff8036d03d>] driver_detach+0xdb/0x11e
[<ffffffff8036c529>] bus_remove_driver+0x75/0x97
[<ffffffff8036d0b1>] driver_unregister+0x9/0xb
[<ffffffff8828eddb>] :ssb:ssb_driver_unregister+0xd/0xf
[<ffffffff882b0964>] :bcm43xx_mac80211:bcm43xx_exit+0x10/0x23
[<ffffffff80257a82>] sys_delete_module+0x1b5/0x1e6
[<ffffffff8024db6a>] trace_hardirqs_on+0x11c/0x147
[<ffffffff803f1dcb>] trace_hardirqs_on_thunk+0x35/0x37
[<ffffffff80209f9e>] system_call+0x7e/0x83
ACPI: PCI interrupt for device 0000:01:00.0 disabled
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LK2E] -> GSI 19 (level, high) -> IRQ 19
I don't know what would happen if an 'ifdown' command were issued first, as I am using
NetworkManager to control the interface, and it prevents usage of ifdown.
Larry
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Locking problem in bcm43xx-mac80211
2007-06-01 17:55 Locking problem in bcm43xx-mac80211 Larry Finger
@ 2007-06-01 20:38 ` Michael Buesch
0 siblings, 0 replies; 2+ messages in thread
From: Michael Buesch @ 2007-06-01 20:38 UTC (permalink / raw)
To: Larry Finger; +Cc: Broadcom Linux, wireless, Jiri Benc
On Friday 01 June 2007 19:55:24 Larry Finger wrote:
> When a 'modprobe -r bcm43xx-mac80211' command is given with the interface up, the following kernel
> BUG is issued:
Known. Ignore it for now.
I sent out a patch to Jiri to fix this, but it hasn't
been acked (yet?). Jiri thinks it introduces a race. I think
it doesn't. ;)
--
Greetings Michael.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-06-01 20:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-01 17:55 Locking problem in bcm43xx-mac80211 Larry Finger
2007-06-01 20:38 ` Michael Buesch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).