Shaddy Baddah wrote:
> Interestingly, after performing the above actions, I am now getting 
> additional log messages:
> 
> SoftMAC: Open Authentication completed with GG:GG:GG:GG:GG:GG
> Kernel unaligned access at TPC[100df410] 
> ieee80211softmac_handle_assoc_response]
> Kernel unaligned access at TPC[100df548] 
> ieee80211softmac_handle_assoc_response]

This one doesn't include any offsets, did the line get cut off?

I'm spoilt by the luxuries of i386/x86_64 and am not clear on exactly 
what forms an unaligned access. I am wondering if this line is causing it:

	network = ieee80211softmac_get_network_by_bssid_locked(mac, 
resp->header.addr3);

addr3 is offset 20 bytes in the struct and is 6 bytes long. Because 20 
is not evenly divisible by 6 does that make it an unaligned access?

Is there any documentation I can read on this topic? In my current 
uneducated state I'm likely to write further code with these problems...

> ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
> Kernel unaligned access at TPC[100d03ec] ieee80211_copy_snap+0x74/0x78 
> [ieee802]
> Kernel unaligned access at TPC[100d03ec] ieee80211_copy_snap+0x74/0x78 
> [ieee802]
> Kernel unaligned access at TPC[100d03ec] ieee80211_copy_snap+0x74/0x78 
> [ieee802]
> Kernel unaligned access at TPC[100d03ec] ieee80211_copy_snap+0x74/0x78 
> [ieee802]
> Kernel unaligned access at TPC[100d03ec] ieee80211_copy_snap+0x74/0x78 
> [ieee802]

This one should be fixed by the attached patch. Sorry for not sending it 
sooner, the contributor has not yet solved all problems and I was 
waiting to see if more patches would come.

> Kernel unaligned access at TPC[100ee624] do_rx+0x394/0x5ec [zd1211rw]
> Kernel unaligned access at TPC[100ee62c] do_rx+0x39c/0x5ec [zd1211rw]
> Kernel unaligned access at TPC[100ee638] do_rx+0x3a8/0x5ec [zd1211rw]
> Kernel unaligned access at TPC[100ee668] do_rx+0x3d8/0x5ec [zd1211rw]
> Kernel unaligned access at TPC[100ee670] do_rx+0x3e0/0x5ec [zd1211rw]

These might be solved by the patch David sent to the list a few days ago 
(thanks!). Have you applied it? If you can confirm it helps I will send 
it up through John.

Thanks,
Daniel