From: Bachman Kharazmi <bachman@tor.lindesign.se>
To: Tomas Winkler <tomasw@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>,
linux-wireless@vger.kernel.org
Subject: Re: compat-wireless iwl4965 on hp/compaq 2510p
Date: Sat, 05 Apr 2008 15:48:57 +0200 [thread overview]
Message-ID: <47F78349.8080704@tor.lindesign.se> (raw)
In-Reply-To: <1ba2fa240804050637g13a92505j5d4d65234db8c6fc@mail.gmail.com>
Not that easy.
When the module is loaded I press the (touch) panel where the wireless
icon is. This still doesn't turn on the WLAN LED.
Nothing in dmesg then I press the touchbutton.
lapp:/tmp# cat /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
2
echo "1" > /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
iwl4965: Error sending REPLY_CARD_STATE_CMD: enqueue_hcmd failed: -5
echo "0" > /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC
lapp:/tmp# cat /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
2
/Bachman
Tomas Winkler wrote:
> On Sat, Apr 5, 2008 at 3:01 PM, Bachman Kharazmi
> <bachman@tor.lindesign.se> wrote:
>> lapp:/tmp# ip link set wlan0 up
>> SIOCSIFFLAGS: No such device
>>
>> lapp:/tmp# iwconfig
>> lo no wireless extensions.
>>
>> eth1 no wireless extensions.
>>
>> wmaster0 no wireless extensions.
>>
>> wlan0 IEEE 802.11 ESSID:"planet_mars"
>> Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
>> Tx-Power=0 dBm
>> Retry min limit:7 RTS thr:off Fragment thr=2352 B
>> Encryption key:B200-A927-32DA-86E9-0DEF-EFF3-FB
>> Link Quality:0 Signal level:0 Noise level:0
>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>
>>
>> note that dmesg sais
>> iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>> iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
>> phy1: Selected rate control algorithm 'iwl-4965-rs'
>> ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>> iwl4965: Radio disabled by HW RF Kill switch
>
> ___iwl4965: Radio disabled by HW RF Kill switch___ this would explain
> the problem
>
> can you please enable the RF?
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-04-05 13:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-05 11:12 compat-wireless iwl4965 on hp/compaq 2510p Bachman Kharazmi
2008-04-05 11:50 ` Johannes Berg
2008-04-05 11:52 ` Bachman Kharazmi
2008-04-05 11:54 ` Johannes Berg
2008-04-05 12:01 ` Bachman Kharazmi
2008-04-05 13:37 ` Tomas Winkler
2008-04-05 13:48 ` Bachman Kharazmi [this message]
2008-04-05 14:39 ` [SOLVED] " Bachman Kharazmi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47F78349.8080704@tor.lindesign.se \
--to=bachman@tor.lindesign.se \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=tomasw@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).