From: Jerry Quinn <jlquinn@optonline.net>
To: linux-wireless@vger.kernel.org
Subject: ath5k can't connect on 5424
Date: Sat, 24 May 2008 19:27:35 -0400 [thread overview]
Message-ID: <4838A467.1000700@optonline.net> (raw)
Hi. I just installed compat-wireless 2008-05-24.
The good news is that ath5k now loads into the kernel and can talk to the
chip. However, beyond that, the device doesn't do anything. During modprobe
ath5k, I get
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
ath5k_pci 0000:03:00.0: registered as 'phy1'
phy1: Selected rate control algorithm 'pid'
ath5k phy1: Atheros AR5424 chip found (MAC: 0xa3, PHY: 0x61)
udev: renamed network interface wlan0 to ath0
The pci id for the chip is 168c:1014 (rev 01). This is an IBM Thinkpad T60p,
running Debian testing with kernel 2.6.25-2-686, the latest dist kernel available.
When I try to bring up the interface I just get a link is not ready message in
the kernel log with no other info. Also, iwlist ath0 scan gives me no results
either (I did ifconfig ath0 up beforehand).
Let me know if there's any further diagnosis I can provide to help out.
Thanks,
Jerry
next reply other threads:[~2008-05-24 23:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-24 23:27 Jerry Quinn [this message]
2008-05-28 0:28 ` ath5k can't connect on 5424 John W. Linville
2008-05-29 4:57 ` Michael Renzmann
2008-05-29 15:10 ` Jerry Quinn (ibm)
2008-05-29 18:52 ` Pavel Roskin
2008-05-29 19:18 ` Bob Copeland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4838A467.1000700@optonline.net \
--to=jlquinn@optonline.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).