Re: suspend vs. b43

[Ehud Gavron <gavron@wetwork.net>]

Johannes Berg wrote:
> On Fri, 2008-05-30 at 16:06 +0200, Michael Buesch wrote:
>   
>> On Friday 30 May 2008 14:31:53 Johannes Berg wrote:
>>     
>>> Since a while ago I've had trouble resuming when b43 was connected to an
>>> AP while suspended.
>>>
>>> I did a test today where this was the only difference, but I failed to
>>> see whether ssb or b43 were causing the problem.
>>>
>>> Does anyone have a machine with b43 in it that can suspend and supports
>>> the RTC-trace feature so we can narrow it down? Even reproducing might
>>> help to make sure it's not just something weird with my powerbook.
>>>       
>> Resume is pretty broken since some time for me.
>> It sometimes works fine and sometimes just hangs with a black screen.
>> I have no idea what's going on.
>>     
>
> Odd. Resume itself works just fine here, except when b43 is up. But then
> again, you might not notice that this is the problem because by default,
> nothing gets printed on the resume console and then it will indeed hang
> with a black screen.
>
> johannes
>   
>   
With NM disabled 2.6.25-wl  4311 after a suspend/resume I can:
1. Successfully scan for APs (ifconfig wlan0 up... iwlist wlan0 scan)
2. Associate with an AP  (iwconfig ...essid...key...)
3. Get a DHCP address (dhclient... offer... bound to address such and such)
but
4. NO FURTHER IP COMMUNICATIONS WORKS

Let me know what other diags to run or if I should upgrade to the latest 
wl tree if you think that will change the symptoms.
Things have been busy but there is a weekend coming up here shortly.

Ehud

> ------------------------------------------------------------------------
>
> _______________________________________________
> Bcm43xx-dev mailing list
> Bcm43xx-dev@lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
>