From: Hin-Tak Leung <hintak_leung@yahoo.co.uk>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@redhat.com>,
flamingice@sourmilk.net, Andrea Merello <andreamrl@tiscali.it>
Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br>,
Larry Finger <Larry.Finger@lwfinger.net>,
Pavel Roskin <proski@gnu.org>
Subject: [PATCH 4/6] rtl8187: change part 1 of rtl8187_dev.c to support RTL8187B
Date: Tue, 08 Jul 2008 07:52:14 +0100 [thread overview]
Message-ID: <48730E9E.4010802@yahoo.co.uk> (raw)
In-Reply-To: <4873088C.2090603@yahoo.co.uk>
rtl8187: change part 1 of rtl8187_dev.c to support RTL8187B
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
---
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index bec96d7..b17f237 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -27,19 +27,21 @@
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
-MODULE_DESCRIPTION("RTL8187 USB wireless driver");
+MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
MODULE_LICENSE("GPL");
static struct usb_device_id rtl8187_table[] __devinitdata = {
/* Realtek */
- {USB_DEVICE(0x0bda, 0x8187)},
+ {USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
+ {USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
+ {USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
/* Netgear */
- {USB_DEVICE(0x0846, 0x6100)},
- {USB_DEVICE(0x0846, 0x6a00)},
+ {USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
+ {USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
/* HP */
- {USB_DEVICE(0x03f0, 0xca02)},
+ {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
/* Sitecom */
- {USB_DEVICE(0x0df6, 0x000d)},
+ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
{}
};
@@ -318,29 +320,12 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev)
return 0;
}
-static int rtl8187_init_hw(struct ieee80211_hw *dev)
+static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
u8 reg;
int i;
- /* reset */
- rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
- reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
- rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
- rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
- rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
- rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg &
~RTL818X_CONFIG3_ANAPARAM_WRITE);
- rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
- rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
-
- msleep(200);
- rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
- rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
- rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
- msleep(200);
-
reg = rtl818x_ioread8(priv, &priv->map->CMD);
reg &= (1 << 1);
reg |= RTL818X_CMD_RESET;
@@ -376,12 +361,48 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
return -ETIMEDOUT;
}
+ return 0;
+}
+
+static int rtl8187_init_hw(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg;
+ int res;
+
+ /* reset */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg |
+ RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg &
+ ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+ msleep(200);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
+ msleep(200);
+
+ res = rtl8187_cmd_reset(dev);
+ if (res)
+ return res;
+
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
- rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
- rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg &
~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
/* setup card */
@@ -426,9 +447,11 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
- rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
- rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
msleep(100);
@@ -445,16 +468,198 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
return 0;
}
+static const u8 rtl8187b_reg_table[][3] = {
+ {0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0},
+ {0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0},
+ {0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0},
+ {0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0},
+
+ {0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1},
+ {0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1},
+ {0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xE0, 0xFF, 1}, {0xE1, 0x0F, 1},
+ {0xE2, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1}, {0xF2, 0x02, 1},
+ {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1}, {0xF6, 0x06, 1},
+ {0xF7, 0x07, 1}, {0xF8, 0x08, 1},
+
+ {0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2},
+ {0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2},
+ {0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2},
+ {0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2},
+ {0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2},
+ {0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2},
+ {0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2}, {0x72, 0x56, 2},
+ {0x73, 0x9A, 2},
+
+ {0x34, 0xF0, 0}, {0x35, 0x0F, 0}, {0x5B, 0x40, 0}, {0x84, 0x88, 0},
+ {0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0},
+ {0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0},
+ {0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0},
+ {0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x91, 0x03, 0},
+
+ {0x4C, 0x00, 2}, {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0},
+ {0x8E, 0x08, 0}, {0x8F, 0x00, 0}
+};
+
+static int rtl8187b_init_hw(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ int res, i;
+ u8 reg;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ reg |= RTL818X_CONFIG3_ANAPARAM_WRITE | RTL818X_CONFIG3_GNT_SELECT;
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, 0x727f3f52);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, 0x45090658);
+ rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, 0);
+
+ rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
+ reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
+ rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
+ rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
+
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+
+ res = rtl8187_cmd_reset(dev);
+ if (res)
+ return res;
+
+ rtl818x_iowrite16(priv, (__le16 *)0xFF2D, 0x0FFF);
+ reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+ reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+ reg |= RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT |
+ RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
+ reg = rtl818x_ioread8(priv, &priv->map->RATE_FALLBACK);
+ reg |= RTL818X_RATE_FALLBACK_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, reg);
+
+ rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
+ rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+ for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) {
+ rtl818x_iowrite8_idx(priv,
+ (u8 *)(uintptr_t)
+ (rtl8187b_reg_table[i][0] | 0xFF00),
+ rtl8187b_reg_table[i][1],
+ rtl8187b_reg_table[i][2]);
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
+ rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
+
+ rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1);
+ rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1);
+ rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1);
+
+ rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001);
+
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+ msleep(1100);
+
+ priv->rf->init(dev);
+
+ reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+
+ rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4);
+ rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00);
+ rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
+ rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
+ rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F);
+ rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
+ rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
+
+ reg = rtl818x_ioread8(priv, (u8 *)0xFFDB);
+ rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2));
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3);
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3);
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3);
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3);
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3);
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3);
+ rtl818x_iowrite8(priv, (u8 *)0xFF61, 0);
+ rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1);
+ rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1);
+ rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10);
+ rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2);
+
+ rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B);
+
+ rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1);
+
+ return 0;
+}
+
static int rtl8187_start(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
u32 reg;
int ret;
- ret = rtl8187_init_hw(dev);
+ ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
+ rtl8187b_init_hw(dev);
if (ret)
return ret;
+ if (priv->is_rtl8187b) {
+ reg = RTL818X_RX_CONF_MGMT |
+ RTL818X_RX_CONF_DATA |
+ RTL818X_RX_CONF_BROADCAST |
+ RTL818X_RX_CONF_NICMAC |
+ RTL818X_RX_CONF_BSSID |
+ (7 << 13 /* RX FIFO threshold NONE */) |
+ (7 << 10 /* MAX RX DMA */) |
+ RTL818X_RX_CONF_RX_AUTORESETPHY |
+ RTL818X_RX_CONF_ONLYERLPKT |
+ RTL818X_RX_CONF_MULTICAST;
+ priv->rx_conf = reg;
+ rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+ RTL818X_TX_CONF_HW_SEQNUM |
+ RTL818X_TX_CONF_DISREQQSIZE |
+ (7 << 8 /* short retry limit */) |
+ (7 << 0 /* long retry limit */) |
+ (7 << 21 /* MAX TX DMA */));
+ rtl8187_init_urbs(dev);
+ return 0;
+ }
+
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
next prev parent reply other threads:[~2008-07-08 6:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-08 6:26 [PATCH 0/6] rtl8187: Adding Realtek rtl8187B support Hin-Tak Leung
2008-07-08 6:30 ` [PATCH 1/6] " Hin-Tak Leung
2008-07-08 6:38 ` [PATCH 1/6] rtl8187: updating rtl8187.h to support RTL8187B Hin-Tak Leung
2008-07-08 6:41 ` [PATCH 2/6] rtl8187: updating rtl818x.h " Hin-Tak Leung
2008-07-08 6:46 ` [PATCH 3/6] rtl8187: updating rtl8187_rtl8225.c " Hin-Tak Leung
2008-07-08 6:52 ` Hin-Tak Leung [this message]
2008-07-08 6:54 ` [PATCH 5/6] rtl8187: change part 2 of rtl8187_dev.c " Hin-Tak Leung
2008-07-08 6:57 ` [PATCH 6/6] rtl8187: updating Kconfig " Hin-Tak Leung
-- strict thread matches above, loose matches on Subject: below --
2008-07-08 11:33 [PATCH 4/6] rtl8187: change part 1 of rtl8187_dev.c " Hin-Tak Leung
2008-07-08 16:18 [PATCH 1/6] rtl8187: updating rtl8187.h " Hin-Tak Leung
2008-07-08 16:18 ` [PATCH 2/6] rtl8187: updating rtl818x.h " Hin-Tak Leung
2008-07-08 16:18 ` [PATCH 3/6] rtl8187: updating rtl8187_rtl8225.c " Hin-Tak Leung
2008-07-08 16:18 ` [PATCH 4/6] rtl8187: change part 1 of rtl8187_dev.c " Hin-Tak Leung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48730E9E.4010802@yahoo.co.uk \
--to=hintak_leung@yahoo.co.uk \
--cc=Larry.Finger@lwfinger.net \
--cc=andreamrl@tiscali.it \
--cc=flamingice@sourmilk.net \
--cc=herton@mandriva.com.br \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@redhat.com \
--cc=proski@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).