From: Karol Szkudlarek <karol@mikronika.com.pl>
To: linux-wireless@vger.kernel.org
Subject: iwl3945
Date: Mon, 21 Jul 2008 15:29:57 +0200 [thread overview]
Message-ID: <48848F55.4060404@mikronika.com.pl> (raw)
Hello!
I hope that report I'm sending to the right mailing list. During boot I=
=20
have a following crash in
mac80211 module. I'm using iwl3945 driver on my hp6710b laptop.
Jul 21 15:20:10 lap audio[5670]: Registered manager path:/org/bluez/aud=
io
Jul 21 15:20:10 lap kernel: [ 34.000991] WARNING: at=20
/home/karol/tmp/downloads/compat-wireless-2008-07-21/net/mac80211/util.=
c:385=20
ieee80211_wake_queue()
Jul 21 15:20:10 lap kernel: [ 34.001002] Pid: 3438, comm: iwl3945/0 Not=
=20
tainted 2.6.24-19-generic #1
Jul 21 15:20:10 lap kernel: [ 34.001025] [<f8c24ce7>]=20
ieee80211_wake_queue+0x87/0x90 [mac80211]
Jul 21 15:20:10 lap kernel: [ 34.001087] [<f8c24d0b>]=20
ieee80211_wake_queues+0x1b/0x30 [mac80211]
Jul 21 15:20:10 lap kernel: [ 34.001130] [<f8c4b0bc>]=20
iwl3945_bg_alive_start+0x1bc/0x340 [iwl3945]
Jul 21 15:20:10 lap kernel: [ 34.001158] [<f8c4af00>]=20
iwl3945_bg_alive_start+0x0/0x340 [iwl3945]
Jul 21 15:20:10 lap kernel: [ 34.001175] [run_workqueue+0xbf/0x160]=20
run_workqueue+0xbf/0x160
Jul 21 15:20:10 lap kernel: [ 34.001194] [worker_thread+0x0/0xe0]=20
worker_thread+0x0/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001204] [worker_thread+0x84/0xe0]=20
worker_thread+0x84/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001214] [<c0140c40>]=20
autoremove_wake_function+0x0/0x40
Jul 21 15:20:10 lap kernel: [ 34.001226] [worker_thread+0x0/0xe0]=20
worker_thread+0x0/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001235] [kthread+0x42/0x70]=20
kthread+0x42/0x70
Jul 21 15:20:10 lap kernel: [ 34.001240] [kthread+0x0/0x70] kthread+0x0=
/0x70
Jul 21 15:20:10 lap kernel: [ 34.001249] [kernel_thread_helper+0x7/0x10=
]=20
kernel_thread_helper+0x7/0x10
Jul 21 15:20:10 lap kernel: [ 34.001265] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Jul 21 15:20:10 lap kernel: [ 34.001269] WARNING: at=20
/home/karol/tmp/downloads/compat-wireless-2008-07-21/net/mac80211/util.=
c:385=20
ieee80211_wake_queue()
Jul 21 15:20:10 lap kernel: [ 34.001276] Pid: 3438, comm: iwl3945/0 Not=
=20
tainted 2.6.24-19-generic #1
Jul 21 15:20:10 lap kernel: [ 34.001283] [<f8c24ce7>]=20
ieee80211_wake_queue+0x87/0x90 [mac80211]
Jul 21 15:20:10 lap kernel: [ 34.001329] [<f8c24d0b>]=20
ieee80211_wake_queues+0x1b/0x30 [mac80211]
Jul 21 15:20:10 lap kernel: [ 34.001371] [<f8c4b0bc>]=20
iwl3945_bg_alive_start+0x1bc/0x340 [iwl3945]
Jul 21 15:20:10 lap kernel: [ 34.001397] [<f8c4af00>]=20
iwl3945_bg_alive_start+0x0/0x340 [iwl3945]
Jul 21 15:20:10 lap kernel: [ 34.001414] [run_workqueue+0xbf/0x160]=20
run_workqueue+0xbf/0x160
Jul 21 15:20:10 lap kernel: [ 34.001430] [worker_thread+0x0/0xe0]=20
worker_thread+0x0/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001438] [worker_thread+0x84/0xe0]=20
worker_thread+0x84/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001448] [<c0140c40>]=20
autoremove_wake_function+0x0/0x40
Jul 21 15:20:10 lap kernel: [ 34.001460] [worker_thread+0x0/0xe0]=20
worker_thread+0x0/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001468] [kthread+0x42/0x70]=20
kthread+0x42/0x70
Jul 21 15:20:10 lap kernel: [ 34.001474] [kthread+0x0/0x70] kthread+0x0=
/0x70
Jul 21 15:20:10 lap kernel: [ 34.001483] [kernel_thread_helper+0x7/0x10=
]=20
kernel_thread_helper+0x7/0x10
Jul 21 15:20:10 lap kernel: [ 34.001496] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Jul 21 15:20:10 lap kernel: [ 34.001500] WARNING: at=20
/home/karol/tmp/downloads/compat-wireless-2008-07-21/net/mac80211/util.=
c:385=20
ieee80211_wake_queue()
Jul 21 15:20:10 lap kernel: [ 34.001507] Pid: 3438, comm: iwl3945/0 Not=
=20
tainted 2.6.24-19-generic #1
Jul 21 15:20:10 lap kernel: [ 34.001514] [<f8c24ce7>]=20
ieee80211_wake_queue+0x87/0x90 [mac80211]
Jul 21 15:20:10 lap kernel: [ 34.001560] [<f8c24d0b>]=20
ieee80211_wake_queues+0x1b/0x30 [mac80211]
Jul 21 15:20:10 lap kernel: [ 34.001601] [<f8c4b0bc>]=20
iwl3945_bg_alive_start+0x1bc/0x340 [iwl3945]
Jul 21 15:20:10 lap kernel: [ 34.001626] [<f8c4af00>]=20
iwl3945_bg_alive_start+0x0/0x340 [iwl3945]
Jul 21 15:20:10 lap kernel: [ 34.001643] [run_workqueue+0xbf/0x160]=20
run_workqueue+0xbf/0x160
Jul 21 15:20:10 lap kernel: [ 34.001658] [worker_thread+0x0/0xe0]=20
worker_thread+0x0/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001667] [worker_thread+0x84/0xe0]=20
worker_thread+0x84/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001676] [<c0140c40>]=20
autoremove_wake_function+0x0/0x40
Jul 21 15:20:10 lap kernel: [ 34.001688] [worker_thread+0x0/0xe0]=20
worker_thread+0x0/0xe0
Jul 21 15:20:10 lap kernel: [ 34.001696] [kthread+0x42/0x70]=20
kthread+0x42/0x70
Jul 21 15:20:10 lap kernel: [ 34.001702] [kthread+0x0/0x70] kthread+0x0=
/0x70
Jul 21 15:20:10 lap kernel: [ 34.001710] [kernel_thread_helper+0x7/0x10=
]=20
kernel_thread_helper+0x7/0x10
Jul 21 15:20:10 lap kernel: [ 34.001724] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Jul 21 15:20:10 lap NetworkManager: <info> wlan0: Device is=20
fully-supported using driver 'iwl3945'.
Jul 21 15:20:10 lap NetworkManager: <info> wlan0: driver supports SSID=20
scans (scan_capa 0x01).
Jul 21 15:20:10 lap NetworkManager: <info> nm_device_init(): waiting fo=
r=20
device's worker thread to start
Jul 21 15:20:10 lap NetworkManager: <info> nm_device_init(): device's=20
worker thread started, continuing.
Jul 21 15:20:10 lap NetworkManager: <info> Now managing wireless=20
(802.11) device 'wlan0'.
Jul 21 15:20:10 lap NetworkManager: <info> Deactivating device wlan0.
Jul 21 15:20:10 lap NetworkManager: <info> Will activate wired=20
connection 'eth0' because it now has a link.
Jul 21 15:20:10 lap NetworkManager: <debug> [1216646410.600448]=20
nm_hal_device_added(): New device added (hal udi is=20
'/org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_T10N').
Jul 21 15:20:10 lap NetworkManager: <debug> [1216646410.601408]=20
nm_hal_device_added(): New device added (hal udi is=20
'/org/freedesktop/Hal/devices/platform_bluetooth').
Jul 21 15:20:10 lap NetworkManager: <info> Error getting killswitch=20
power: org.freedesktop.Hal.Device.KillSwitch.NotSupported -=20
hal-ipw-killswitch-linux returned 255
Jul 21 15:20:10 lap NetworkManager: <info> Wireless now enabled by radi=
o=20
killswitch
Jul 21 15:20:12 lap kernel: [ 34.619783] tg3: eth0: Link is up at 100=20
Mbps, full duplex.
Jul 21 15:20:12 lap kernel: [ 34.619791] tg3: eth0: Flow control is on=20
for TX and on for RX.
Jul 21 15:20:12 lap NetworkManager: <info> Will activate wired=20
connection 'eth0' because it now has a link.
Jul 21 15:20:12 lap NetworkManager: <info> SWITCH: no current=20
connection, found better connection 'eth0'.
Jul 21 15:20:12 lap dhcdbd: message_handler: message handler not found=20
under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Jul 21 15:20:12 lap NetworkManager: <info> Will activate connection 'et=
h0'.
Jul 21 15:20:12 lap NetworkManager: <info> Device eth0 activation=20
scheduled...
Linux lap 2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 2008 i686=20
GNU/Linux
Modules are built today from package:
http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless=
-2.6.tar.bz2
--=20
Karol Szkudlarek
Mikronika
ul. Wykopy 2/4
60-001 POZNA=C3=91
tel. +48 61 6655600
fax +48 61 6655602
e-mail karol@mikronika.com.pl
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2008-07-21 13:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-21 13:29 Karol Szkudlarek [this message]
[not found] <CAGAvgFun5q1-qdqzx3nxzpZAXyqY60xycgrF56p6qz5ryAJiwQ@mail.gmail.com>
2014-04-18 6:11 ` iwl3945 Stanislaw Gruszka
2014-04-18 6:20 ` iwl3945 Krishna Chaitanya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48848F55.4060404@mikronika.com.pl \
--to=karol@mikronika.com.pl \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).