From: johan henriksson <jhn98032@gmail.com>
To: linux-wireless@vger.kernel.org
Subject: RTL8187: RTL8187B with id 0bda:8198
Date: Wed, 30 Jul 2008 11:44:12 +0200 [thread overview]
Message-ID: <489037EC.4020306@gmail.com> (raw)
Hi!
I am trying to get the wireless card on a Toshiba Satellite L350
to work. The laptop uses a RTL8187b chip but unfortunately with an id of 0bda:8198.
I have tried the RTL8187 driver in the 2.6.27-rc1 release.
To make the driver accept the card I had to add the productid 8198 to the driver.
Now the card is detected and seems to work. I can ping another computer on the network
but for some reason the network just stops working after about 6 seconds.
There are no errors in the kernel log and if I reconnect with "iwconfig wlan0 essid myNet" the card
works again for another 6 seconds.
I am starting to suspect that the RTL8187b has a watchdog timer like the RTL8181 that times out?
Does anybody have the datasheet for the RTL8187b?
Regards
Johan Henriksson
/proc/bus/usb/devices
-------------------------
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=8198 Rev= 2.00
S: Manufacturer=Manufacturer_Realtek
S: Product=RTL8187B_WLAN_Adapter
S: SerialNumber=00e04c000001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
kernel log
---------------------------
[ 25.947358] rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
[ 25.947363] hardware, use at your own risk
[ 25.958701] phy0: Selected rate control algorithm 'pid'
[ 26.044629] phy0: hwaddr 00:1b:9e:ff:f4:03, RTL8187BvE V0 + rtl8225z2
[ 26.057455] usbcore: registered new interface driver rtl8187
[ 39.147086] wlan0: authenticate with AP 00:1b:2f:6b:48:4e
[ 39.148826] wlan0: authenticated
[ 39.148949] wlan0: associate with AP 00:1b:2f:6b:48:4e
[ 39.151006] wlan0: RX AssocResp from 00:1b:2f:6b:48:4e (capab=0x431 status=0 aid=1)
[ 39.151098] wlan0: associated
next reply other threads:[~2008-07-30 10:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-30 9:44 johan henriksson [this message]
2008-07-30 12:17 ` RTL8187: RTL8187B with id 0bda:8198 Larry Finger
2008-07-30 18:46 ` johan henriksson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=489037EC.4020306@gmail.com \
--to=jhn98032@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).