From: Tomasz Chmielewski <mangoo@wpkg.org>
To: "Luis R. Rodriguez" <mcgrof@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>,
linux-wireless@vger.kernel.org,
OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Subject: Re: kernel panic on p54pci insertion on mipsel
Date: Wed, 06 Aug 2008 21:02:24 +0200 [thread overview]
Message-ID: <4899F540.8050409@wpkg.org> (raw)
In-Reply-To: <43e72e890808051619u4ed7c447wd80a866192220b84@mail.gmail.com>
Luis R. Rodriguez schrieb:
(...)
>> - doesn't work with prism54.ko module (similar messages to
>> http://marc.info/?l=linux-wireless&m=120250829717134&w=2)
>
> We need more details, or do you get *exactly* the same error messages?
>
> "Out of memory, cannot handle oid" comes up after a failed kmalloc()
> while trying to handle an interrupt and management frame (not 802.11
> frame) from the firmware. From that archived mailing list though the
> oid 0x080002ff is mentioned and... well prism54 doesn't know what that
> is. I wonder if the firmware is triggering random interrupts with
> bogus oids.
>
> If you can provide a complete log it can help. Also in your previous
> posts I see you mentioned you were working with different firmwares.
> 1.0.4.3.arm should *only* be used with prism54. You may also want to
> try an older firmware version than 1.0.4.3.arm, this one came from
> 3com cards.
Is older firmware available anywhere online?
This is a complete log (kernel outputs pasted below each command, kernel
used is 2.6.25.12 with OpenWRT patches), firmware used is 1.0.4.3.arm -
messages are essentially the same as the last time I tried with 2.6.23.x:
# modprobe prism54
Loaded prism54 driver, version 1.2
PCI: Fixing up device 0000:00:02.0
# dmesg -c
Loaded prism54 driver, version 1.2
PCI: Fixing up device 0000:00:02.0
# ifconfig eth2 up
eth2: Out of memory, cannot handle oid 0x030002ff
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=10000002 err=-145
eth2: Out of memory, cannot handle oid 0x00000012
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=12000005 err=-145
eth2: Out of memory, cannot handle oid 0x07000012
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=ff020003 err=-145
eth2: interface reset failure
prism54: Your card/socket may be faulty, or IRQ line too busy :(
SIOCSIFFLAGS: Connection timed out
# dmesg -c
eth2: resetting device...
eth2: uploading firmware...
eth2: firmware version: 1.0.4.3
eth2: firmware upload complete
eth2: Out of memory, cannot handle oid 0x030002ff
eth2: timeout waiting for mgmt response 250, triggering device
eth2: timeout waiting for mgmt response 225, triggering device
eth2: timeout waiting for mgmt response 200, triggering device
eth2: timeout waiting for mgmt response 175, triggering device
eth2: timeout waiting for mgmt response 150, triggering device
eth2: timeout waiting for mgmt response 125, triggering device
eth2: timeout waiting for mgmt response 100, triggering device
eth2: timeout waiting for mgmt response 75, triggering device
eth2: timeout waiting for mgmt response 50, triggering device
eth2: timeout waiting for mgmt response 25, triggering device
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=10000002 err=-145
eth2: Out of memory, cannot handle oid 0x00000012
eth2: timeout waiting for mgmt response 250, triggering device
eth2: timeout waiting for mgmt response 225, triggering device
eth2: timeout waiting for mgmt response 200, triggering device
eth2: timeout waiting for mgmt response 175, triggering device
eth2: timeout waiting for mgmt response 150, triggering device
eth2: timeout waiting for mgmt response 125, triggering device
eth2: timeout waiting for mgmt response 100, triggering device
eth2: timeout waiting for mgmt response 75, triggering device
eth2: timeout waiting for mgmt response 50, triggering device
eth2: timeout waiting for mgmt response 25, triggering device
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=12000005 err=-145
eth2: Out of memory, cannot handle oid 0x07000012
eth2: timeout waiting for mgmt response 250, triggering device
eth2: timeout waiting for mgmt response 225, triggering device
eth2: timeout waiting for mgmt response 200, triggering device
eth2: timeout waiting for mgmt response 175, triggering device
eth2: timeout waiting for mgmt response 150, triggering device
eth2: timeout waiting for mgmt response 125, triggering device
eth2: timeout waiting for mgmt response 100, triggering device
eth2: timeout waiting for mgmt response 75, triggering device
eth2: timeout waiting for mgmt response 50, triggering device
eth2: timeout waiting for mgmt response 25, triggering device
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=ff020003 err=-145
eth2: mgt_commit: failure
eth2: interface reset failure
prism54: Your card/socket may be faulty, or IRQ line too busy :(
--
Tomasz Chmielewski
http://wpkg.org
next prev parent reply other threads:[~2008-08-06 19:02 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-05 19:55 kernel panic on p54pci insertion on mipsel Tomasz Chmielewski
2008-08-05 20:12 ` Johannes Berg
2008-08-05 21:54 ` Tomasz Chmielewski
2008-08-05 23:19 ` Luis R. Rodriguez
2008-08-06 8:02 ` Tomasz Chmielewski
2008-08-06 19:02 ` Tomasz Chmielewski [this message]
2008-08-06 19:50 ` Chr
2008-08-06 20:04 ` Tomasz Chmielewski
2008-08-06 20:16 ` Johannes Berg
2008-08-06 20:25 ` Tomasz Chmielewski
2008-08-06 20:28 ` Tomasz Chmielewski
2008-08-06 20:34 ` Michael Buesch
2008-08-06 21:14 ` Tomasz Chmielewski
2008-08-06 20:50 ` Chr
2008-08-06 21:16 ` Tomasz Chmielewski
2008-08-07 8:34 ` Tomasz Chmielewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4899F540.8050409@wpkg.org \
--to=mangoo@wpkg.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=mcgrof@gmail.com \
--cc=openwrt-devel@lists.openwrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).