linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gregory Nietsky <gregory@dnstelecom.co.za>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org,
	linux-kernel@vger.kernel.org, ath5k-devel@venema.h4ckr.net
Subject: Re: [ath5k-devel] [PATCH 1/1] Ath5k: add AP mode
Date: Sun, 28 Sep 2008 12:44:44 +0200	[thread overview]
Message-ID: <48DF601C.9060406@dnstelecom.co.za> (raw)
In-Reply-To: <1222519728-14989-1-git-send-email-jirislaby@gmail.com>

Gents it is great to see this happen one snippet more and you will be 
able to set the interface into AP mode from userspace hostapd and friends.


diff --git a/drivers/net/wireless/ath5k/base.c 
b/drivers/net/wireless/ath5k/base.c
index e09ed2c..69aad6e 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -488,6 +488,7 @@ ath5k_pci_probe(struct pci_dev *pdev,

        hw->wiphy->interface_modes =
                BIT(NL80211_IFTYPE_STATION) |
+               BIT(NL80211_IFTYPE_AP) |
                BIT(NL80211_IFTYPE_ADHOC) |
                BIT(NL80211_IFTYPE_MESH_POINT);


i have had it working and no complaints so far.

please note that as with mac80211_hwsim it is dependent on a patch

Documentation/networking/mac80211_hwsim/README

Please note that the current Linux kernel does not enable AP mode, so a
simple patch is needed to enable AP mode selection:
http://johannes.sipsolutions.net/patches/kernel/all/LATEST/006-allow-ap-vlan-modes.patch

-->

Subject: mac80211: allow AP and VLAN modes

This patch allows switching interfaces into AP/VLAN modes using
cfg80211 (nl80211). Don't allow doing it with wext because then
people will just attempt to do it manually (without hostapd) and
complain that it doesn't work.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
 net/mac80211/cfg.c |    2 ++
 1 file changed, 2 insertions(+)

--- everything.orig/net/mac80211/cfg.c	2008-09-26 15:07:22.000000000 +0200
+++ everything/net/mac80211/cfg.c	2008-09-26 15:09:06.000000000 +0200
@@ -33,6 +33,8 @@ static bool nl80211_type_check(enum nl80
 #ifdef CONFIG_MAC80211_MESH
 	case NL80211_IFTYPE_MESH_POINT:
 #endif
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_WDS:
 		return true;
 	default:


<--


Regards Greg

Jiri Slaby wrote:
> Add support for AP mode. This involves:
> - enablement in ath5k_beacon_config -- initialize beacon timer
> - add AP to the supported modes in ath5k_add_interface
> - handle beacon change even for AP in ath5k_config_interface
> - remove useless test for IBSS in ath5k_beacon_update
>
> Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
> Cc: Nick Kossifidis <mickflemm@gmail.com>
> Cc: Luis R. Rodriguez <mcgrof@gmail.com>
> ---
>  drivers/net/wireless/ath5k/base.c |   42 +++++++++++++++----------------------
>  1 files changed, 17 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
> index e09ed2c..d5d8e2d 100644
> --- a/drivers/net/wireless/ath5k/base.c
> +++ b/drivers/net/wireless/ath5k/base.c
>   

--
This message has been scanned for viruses and
dangerous content by Network Sentry, and 
is believed to be clean.
http://www.dialandsave.co.za


  reply	other threads:[~2008-09-28 11:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-27 12:48 [PATCH 1/1] Ath5k: add AP mode Jiri Slaby
2008-09-28 10:44 ` Gregory Nietsky [this message]
2008-09-28 11:06 ` [ath5k-devel] " Gregory Nietsky
2008-09-28 16:14   ` Jiri Slaby

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48DF601C.9060406@dnstelecom.co.za \
    --to=gregory@dnstelecom.co.za \
    --cc=ath5k-devel@venema.h4ckr.net \
    --cc=jirislaby@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).