From: Zdenek Kabelac <zkabelac@redhat.com>
To: "Alexander E. Patrakov"
<public-patrakov-Re5JQEeQqe8AvxtiuMwx3w@hugh.gmane.org>
Cc: reinette chatre
<public-reinette.chatre-ral2JQCrhuEAvxtiuMwx3w@hugh.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<public-linux-kernel-u79uwXL29TY76Z2rM5mHXA@hugh.gmane.org>,
"linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<public-linux-wireless-u79uwXL29TY76Z2rM5mHXA@hugh.gmane.org>
Subject: Re: iwlagn interrupt problem
Date: Fri, 12 Dec 2008 11:59:37 +0100 [thread overview]
Message-ID: <49424419.1090103@redhat.com> (raw)
In-Reply-To: <c072ca310812110548s64612ac7icd6e9187aa4af75a@mail.gmail.com>
Alexander E. Patrakov napsal(a):
> 2008/12/10 reinette chatre <reinette.chatre-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>:
>> The messages you refer to are printed because a user space app
>> (wpa_supplicant or network manager) brings the wireless interface down
>> and up. Interrupts are disabled when interface is brought down and
>> reenabled when interface is brought up.
>
> OK.
>
>> The unresponsiveness is due to a bug that was fixed recently. The
>> patches have been merged into wireless-testing repo and will be included
>> in 2.6.29. If you want to try
>> the individual patches, please try:
>> http://marc.info/?l=linux-wireless&m=122824886623698&w=2
>> http://marc.info/?l=linux-wireless&m=122849275528102&w=2
>
> These individual patches don't apply to 2.6.27.6, so I installed
> today's compat-wireless-2.6, and it seems to work. Thanks!
>
> OTOH, are these patches a material for backporting into -stable?
>
Hi
I assume that this backtrace I've got with 2.6.28-rc7 is the same issue ?
(If I get it right - this issue will not be fixed in 2.6.28 and is delay for
2.6.29 ?))
usb 3-2: reset full speed USB device using uhci_hcd and address 9
Restarting tasks ... done.
e1000e 0000:00:19.0: irq 377 for MSI/MSI-X
e1000e 0000:00:19.0: irq 377 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: irq 376 for MSI/MSI-X
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:11:d8:da:65:40
wlan0: authenticated
wlan0: associate with AP 00:11:d8:da:65:40
wlan0: RX AssocResp from 00:11:d8:da:65:40 (capab=0x401 status=0 aid=8)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: disassociating by local choice (reason=3)
wlan0: no IPv6 routers present
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:11:d8:da:65:40
wlan0: authenticated
wlan0: associate with AP 00:11:d8:da:65:40
wlan0: RX ReassocResp from 00:11:d8:da:65:40 (capab=0x401 status=0 aid=8)
wlan0: associated
wlan0: No ProbeResp from current AP 00:11:d8:da:65:40 - assume out of range
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON_ASSOC: time out after 500ms.
iwl3945: Error setting RXON_ASSOC configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON_ASSOC: time out after 500ms.
iwl3945: Error setting RXON_ASSOC configuration (-110).
iwl3945: Error sending REPLY_RXON_ASSOC: time out after 500ms.
iwl3945: Error setting RXON_ASSOC configuration (-110).
iwl3945: Error sending REPLY_QOS_PARAM: time out after 500ms.
iwl3945: Error sending REPLY_QOS_PARAM: time out after 500ms.
iwl3945: Error sending REPLY_QOS_PARAM: time out after 500ms.
iwl3945: Error sending REPLY_QOS_PARAM: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 2
wlan0: direct probe to AP 00:11:d8:da:65:40 try 3
wlan0: direct probe to AP 00:11:d8:da:65:40 timed out
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 2
wlan0: direct probe to AP 00:11:d8:da:65:40 try 3
wlan0: direct probe to AP 00:11:d8:da:65:40 timed out
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 2
wlan0: direct probe to AP 00:11:d8:da:65:40 try 3
wlan0: direct probe to AP 00:11:d8:da:65:40 timed out
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 2
wlan0: direct probe to AP 00:11:d8:da:65:40 try 3
wlan0: direct probe to AP 00:11:d8:da:65:40 timed out
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
Zdenek
next prev parent reply other threads:[~2008-12-12 11:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-10 14:38 iwlagn interrupt problem Alexander E. Patrakov
2008-12-10 15:10 ` Alexander E. Patrakov
2008-12-10 17:19 ` reinette chatre
2008-12-11 13:48 ` Alexander E. Patrakov
2008-12-11 17:14 ` reinette chatre
2008-12-12 10:59 ` Zdenek Kabelac [this message]
2008-12-12 11:23 ` Alexander E. Patrakov
2008-12-12 11:31 ` Zdenek Kabelac
2008-12-12 11:39 ` Alexander E. Patrakov
2008-12-12 13:03 ` Dan Williams
2008-12-12 14:04 ` Zdenek Kabelac
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49424419.1090103@redhat.com \
--to=zkabelac@redhat.com \
--cc=public-linux-kernel-u79uwXL29TY76Z2rM5mHXA@hugh.gmane.org \
--cc=public-linux-wireless-u79uwXL29TY76Z2rM5mHXA@hugh.gmane.org \
--cc=public-patrakov-Re5JQEeQqe8AvxtiuMwx3w@hugh.gmane.org \
--cc=public-reinette.chatre-ral2JQCrhuEAvxtiuMwx3w@hugh.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).