wireless-regdb updated 2009-01-14

wireless-regdb updated 2009-01-14

[John W. Linville]

FYI...wireless-regdb.git has been updated with the recent patches
from Michael, Luis, and Pavel.  In particular the Makefile is much
better than I had previously left it. :-)

It is about time (or past time) that we start pushing distributions to
pick-up CRDA and either their own version of wireless-regdb or just
pull the version I am publishing.  I think our wireless regulatory
compliance mechanisms are a lot more flexible than what other systems
are offering -- it is time to get it into the hands of users and get
userland apps (e.g. NetworkManager) to take advantage of it.

Thanks,

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: wireless-regdb updated 2009-01-14

[Tim Gardner]

John W. Linville wrote:
> FYI...wireless-regdb.git has been updated with the recent patches
> from Michael, Luis, and Pavel.  In particular the Makefile is much
> better than I had previously left it. :-)
> 
> It is about time (or past time) that we start pushing distributions to
> pick-up CRDA and either their own version of wireless-regdb or just
> pull the version I am publishing.  I think our wireless regulatory
> compliance mechanisms are a lot more flexible than what other systems
> are offering -- it is time to get it into the hands of users and get
> userland apps (e.g. NetworkManager) to take advantage of it.
> 
> Thanks,
> 
> John

Workin' on it... My intent is to have CRDA/REGDB packaged and ready in
time for Jaunty (April '09). I'm just getting started this week.

rtg
-- 
Tim Gardner tim.gardner@canonical.com

Re: wireless-regdb updated 2009-01-14

[Helmut Schaa]

Hi John,

Am Mittwoch, 14. Januar 2009 schrieb John W. Linville:
> FYI...wireless-regdb.git has been updated with the recent patches
> from Michael, Luis, and Pavel.  In particular the Makefile is much
> better than I had previously left it. :-)

Do you plan to push a new tarball to [1]?

Thanks,
Helmut

[1] http://wireless.kernel.org/download/wireless-regdb/

wireless-regdb updated 2009-01-15 (was Re: wireless-regdb updated 2009-01-14)

[John W. Linville]

On Thu, Jan 15, 2009 at 10:11:22AM +0100, Helmut Schaa wrote:
> Hi John,
> 
> Am Mittwoch, 14. Januar 2009 schrieb John W. Linville:
> > FYI...wireless-regdb.git has been updated with the recent patches
> > from Michael, Luis, and Pavel.  In particular the Makefile is much
> > better than I had previously left it. :-)
> 
> Do you plan to push a new tarball to [1]?
> 
> Thanks,
> Helmut
> 
> [1] http://wireless.kernel.org/download/wireless-regdb/

Probably a good idea, but I didn't put that one there.  I think that is Luis IIRC...?

Anyway, everyone should pull again -- I forgot to push the updated
regulatory.bin yesterday...oops!

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: wireless-regdb updated 2009-01-15 (was Re: wireless-regdb updated 2009-01-14)

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 314 bytes --]

On Thu, 2009-01-15 at 08:49 -0500, John W. Linville wrote:

> > Do you plan to push a new tarball to [1]?

> > [1] http://wireless.kernel.org/download/wireless-regdb/
> 
> Probably a good idea, but I didn't put that one there.  I think that is Luis IIRC...?

I thought it was updated nightly?

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: wireless-regdb updated 2009-01-14

[Tony Vroon]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

John W. Linville wrote:
> It is about time (or past time) that we start pushing distributions to
> pick-up CRDA and either their own version of wireless-regdb or just
> pull the version I am publishing.

To confirm, Gentoo has both CRDA & your published wireless-regdb in the
portage tree and is actively following your releases through this list.

Regards,
Tony V.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAklvc3AACgkQp5vW4rUFj5pflACfbBWpF0acTorkbNA6bDrL31/E
hqYAoIrd2CKMYKX9z5oc+Xnyy5rm7k5E
=//27
-----END PGP SIGNATURE-----

Re: wireless-regdb updated 2009-01-15 (was Re: wireless-regdb updated 2009-01-14)

[Luis R. Rodriguez]

On Thu, Jan 15, 2009 at 7:04 AM, Johannes Berg
<johannes@sipsolutions.net> wrote:
> On Thu, 2009-01-15 at 08:49 -0500, John W. Linville wrote:
>
>> > Do you plan to push a new tarball to [1]?
>
>> > [1] http://wireless.kernel.org/download/wireless-regdb/
>>
>> Probably a good idea, but I didn't put that one there.  I think that is Luis IIRC...?
>
> I thought it was updated nightly?

It is -- seems it hadn't run yet, scheduled to run at 06:10 CET (its
now 18:51 CET), I manually ran it, but also changed it to not have
"master" prefix in the tarball releases.

http://wireless.kernel.org/download/wireless-regdb/

Additionally for those distributions packaging based on John's
regulatory.bin I've put a regulatory.bins dir with just the
regulatory.bin files in it. You will also find a
latest-regulatory-info.txt which tells you the latest regulatory.bin
file used and its SHA1 sum. latest-regulatory.bin is a symlink to this
file. I'll set CRDA to pull this latest file upon building too by
default.

  Luis

Re: wireless-regdb updated 2009-01-15 (was Re: wireless-regdb updated 2009-01-14)

[Luis R. Rodriguez]

On Thu, Jan 15, 2009 at 9:54 AM, Luis R. Rodriguez <mcgrof@gmail.com> wrote:
> I'll set CRDA to pull this latest file upon building too by
> default.

Actually this defeats the purpose of separating the packages, so never
mind. It should help packaging wireless-regdb somehow I suppose
though.

  Luis

Re: wireless-regdb updated 2009-01-15 (was Re: wireless-regdb updated 2009-01-14)

[Tony Vroon]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Thu, Jan 15, 2009 at 9:54 AM, Luis R. Rodriguez <mcgrof@gmail.com> wrote:
> I'll set CRDA to pull this latest file upon building too by
> default.

I'd be pleased if that wasn't the default for make all. We explicitly
separate fetching sources and compiling/installing. (And sources are
hashed to confirm integrity)
Otherwise I'd have to patch that out of the Makefile each time.

Regards,
Tony V.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAklvel4ACgkQp5vW4rUFj5o7HACdGL9yjyQn8g6h8KTq6Lqd0QDZ
M+kAn3wMEgvZYBZvDd2jOE1lwSNkHcAx
=wUxW
-----END PGP SIGNATURE-----

Re: wireless-regdb updated 2009-01-15 (was Re: wireless-regdb updated 2009-01-14)

[Luis R. Rodriguez]

On Thu, Jan 15, 2009 at 10:03 AM, Tony Vroon <tony@linx.net> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Thu, Jan 15, 2009 at 9:54 AM, Luis R. Rodriguez <mcgrof@gmail.com> wrote:
>> I'll set CRDA to pull this latest file upon building too by
>> default.
>
> I'd be pleased if that wasn't the default for make all. We explicitly
> separate fetching sources and compiling/installing. (And sources are
> hashed to confirm integrity)
> Otherwise I'd have to patch that out of the Makefile each time.

Yeah I won't do it, thanks.

  Luis