From: John Daiker <daikerjohn@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: mb@bu3sch.de, stefano.brivio@polimi.it
Subject: b43: checkpatch.pl cleanups
Date: Tue, 24 Feb 2009 02:16:42 -0800 [thread overview]
Message-ID: <49A3C90A.2000608@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 195 bytes --]
Keeping this one simple.
Changing a few "foo * bar" to "foo *bar"
Removes 22 checkpatch.pl errors, with no introduced warnings.
John
Signed-off-by: John Daiker <daikerjohn@gmail.com>
---
[-- Attachment #2: b43.checkpatch.cleanup.diff --]
[-- Type: text/x-diff, Size: 9784 bytes --]
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index e04fc91..08781b6 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -51,8 +51,8 @@ struct b43_debugfs_fops {
};
static inline
-struct b43_dfs_file * fops_to_dfs_file(struct b43_wldev *dev,
- const struct b43_debugfs_fops *dfops)
+struct b43_dfs_file *fops_to_dfs_file(struct b43_wldev *dev,
+ const struct b43_debugfs_fops *dfops)
{
void *p;
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 6d65a02..7d80cec 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1254,8 +1254,8 @@ static inline int should_inject_overflow(struct b43_dmaring *ring)
}
/* Static mapping of mac80211's queues (priorities) to b43 DMA rings. */
-static struct b43_dmaring * select_ring_by_priority(struct b43_wldev *dev,
- u8 queue_prio)
+static struct b43_dmaring *select_ring_by_priority(struct b43_wldev *dev,
+ u8 queue_prio)
{
struct b43_dmaring *ring;
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index 6a18a14..325e4ad 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -36,8 +36,8 @@
#include <linux/sched.h>
-static struct b43_lo_calib * b43_find_lo_calib(struct b43_txpower_lo_control *lo,
- const struct b43_bbatt *bbatt,
+static struct b43_lo_calib *b43_find_lo_calib(struct b43_txpower_lo_control *lo,
+ const struct b43_bbatt *bbatt,
const struct b43_rfatt *rfatt)
{
struct b43_lo_calib *c;
@@ -138,7 +138,7 @@ static u16 lo_measure_feedthrough(struct b43_wldev *dev,
* "pad_mix_gain" is the PAD Mixer Gain.
*/
static u16 lo_txctl_register_table(struct b43_wldev *dev,
- u16 * value, u16 * pad_mix_gain)
+ u16 *value, u16 *pad_mix_gain)
{
struct b43_phy *phy = &dev->phy;
u16 reg, v, padmix;
@@ -754,9 +754,9 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev,
}
static
-struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
- const struct b43_bbatt *bbatt,
- const struct b43_rfatt *rfatt)
+struct b43_lo_calib *b43_calibrate_lo_setting(struct b43_wldev *dev,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
{
struct b43_phy *phy = &dev->phy;
struct b43_phy_g *gphy = phy->g;
@@ -824,9 +824,9 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
/* Get a calibrated LO setting for the given attenuation values.
* Might return a NULL pointer under OOM! */
static
-struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev,
- const struct b43_bbatt *bbatt,
- const struct b43_rfatt *rfatt)
+struct b43_lo_calib *b43_get_calib_lo_settings(struct b43_wldev *dev,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
{
struct b43_txpower_lo_control *lo = dev->phy.g->lo_control;
struct b43_lo_calib *c;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index c788bad..8bf49a5 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -500,7 +500,7 @@ void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
}
/* Read HostFlags */
-u64 b43_hf_read(struct b43_wldev * dev)
+u64 b43_hf_read(struct b43_wldev *dev)
{
u64 ret;
@@ -526,7 +526,7 @@ void b43_hf_write(struct b43_wldev *dev, u64 value)
b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
}
-void b43_tsf_read(struct b43_wldev *dev, u64 * tsf)
+void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
{
/* We need to be careful. As we read the TSF from multiple
* registers, we should take care of register overflows.
@@ -637,7 +637,7 @@ void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
}
static
-void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac)
+void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 *mac)
{
static const u8 zero_addr[ETH_ALEN] = { 0 };
u16 data;
@@ -827,7 +827,7 @@ void b43_dummy_transmission(struct b43_wldev *dev)
}
static void key_write(struct b43_wldev *dev,
- u8 index, u8 algorithm, const u8 * key)
+ u8 index, u8 algorithm, const u8 *key)
{
unsigned int i;
u32 offset;
@@ -849,7 +849,7 @@ static void key_write(struct b43_wldev *dev,
}
}
-static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
+static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr)
{
u32 addrtmp[2] = { 0, 0, };
u8 per_sta_keys_start = 8;
@@ -899,7 +899,7 @@ static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
static void do_key_write(struct b43_wldev *dev,
u8 index, u8 algorithm,
- const u8 * key, size_t key_len, const u8 * mac_addr)
+ const u8 *key, size_t key_len, const u8 *mac_addr)
{
u8 buf[B43_SEC_KEYSIZE] = { 0, };
u8 per_sta_keys_start = 8;
@@ -923,8 +923,8 @@ static void do_key_write(struct b43_wldev *dev,
static int b43_key_write(struct b43_wldev *dev,
int index, u8 algorithm,
- const u8 * key, size_t key_len,
- const u8 * mac_addr,
+ const u8 *key, size_t key_len,
+ const u8 *mac_addr,
struct ieee80211_key_conf *keyconf)
{
int i;
@@ -1324,7 +1324,7 @@ static void handle_irq_pmq(struct b43_wldev *dev)
}
static void b43_write_template_common(struct b43_wldev *dev,
- const u8 * data, u16 size,
+ const u8 *data, u16 size,
u16 ram_offset,
u16 shm_size_offset, u8 rate)
{
@@ -1514,9 +1514,9 @@ static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
* 2) Patching duration field
* 3) Stripping TIM
*/
-static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
- u16 *dest_size,
- struct ieee80211_rate *rate)
+static const u8 *b43_generate_probe_resp(struct b43_wldev *dev,
+ u16 *dest_size,
+ struct ieee80211_rate *rate)
{
const u8 *src_data;
u8 *dest_data;
@@ -2946,7 +2946,7 @@ static void b43_security_init(struct b43_wldev *dev)
b43_clear_keys(dev);
}
-static int b43_rng_read(struct hwrng *rng, u32 * data)
+static int b43_rng_read(struct hwrng *rng, u32 *data)
{
struct b43_wl *wl = (struct b43_wl *)rng->priv;
unsigned long flags;
@@ -3240,7 +3240,7 @@ static void b43_put_phy_into_reset(struct b43_wldev *dev)
msleep(1);
}
-static const char * band_to_string(enum ieee80211_band band)
+static const char *band_to_string(enum ieee80211_band band)
{
switch (band) {
case IEEE80211_BAND_5GHZ:
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index caac4a4..f1cde96 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -823,7 +823,7 @@ static void b43_calc_nrssi_threshold(struct b43_wldev *dev)
* interference mitigation code.
* It is save to restore values in random order.
*/
-static void _stack_save(u32 * _stackptr, size_t * stackidx,
+static void _stack_save(u32 *_stackptr, size_t *stackidx,
u8 id, u16 offset, u16 value)
{
u32 *stackptr = &(_stackptr[*stackidx]);
@@ -837,7 +837,7 @@ static void _stack_save(u32 * _stackptr, size_t * stackidx,
B43_WARN_ON(*stackidx >= B43_INTERFSTACK_SIZE);
}
-static u16 _stack_restore(u32 * stackptr, u8 id, u16 offset)
+static u16 _stack_restore(u32 *stackptr, u8 id, u16 offset)
{
size_t i;
@@ -2565,8 +2565,8 @@ static s8 b43_tssi2dbm_entry(s8 entry[], u8 index,
return 0;
}
-u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
- s16 pab0, s16 pab1, s16 pab2)
+u8 *b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
+ s16 pab0, s16 pab1, s16 pab2)
{
unsigned int i;
u8 *tab;
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 1036bef..8cd9776 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -55,8 +55,8 @@ static u16 generate_cookie(struct b43_pio_txqueue *q,
}
static
-struct b43_pio_txqueue * parse_cookie(struct b43_wldev *dev,
- u16 cookie,
+struct b43_pio_txqueue *parse_cookie(struct b43_wldev *dev,
+ u16 cookie,
struct b43_pio_txpacket **pack)
{
struct b43_pio *pio = &dev->pio;
@@ -134,8 +134,8 @@ static u16 pio_rxqueue_offset(struct b43_wldev *dev)
return 8;
}
-static struct b43_pio_txqueue * b43_setup_pioqueue_tx(struct b43_wldev *dev,
- unsigned int index)
+static struct b43_pio_txqueue *b43_setup_pioqueue_tx(struct b43_wldev *dev,
+ unsigned int index)
{
struct b43_pio_txqueue *q;
struct b43_pio_txpacket *p;
@@ -171,8 +171,8 @@ static struct b43_pio_txqueue * b43_setup_pioqueue_tx(struct b43_wldev *dev,
return q;
}
-static struct b43_pio_rxqueue * b43_setup_pioqueue_rx(struct b43_wldev *dev,
- unsigned int index)
+static struct b43_pio_rxqueue *b43_setup_pioqueue_rx(struct b43_wldev *dev,
+ unsigned int index)
{
struct b43_pio_rxqueue *q;
@@ -308,8 +308,8 @@ err_destroy_bk:
}
/* Static mapping of mac80211's queues (priorities) to b43 PIO queues. */
-static struct b43_pio_txqueue * select_queue_by_priority(struct b43_wldev *dev,
- u8 queue_prio)
+static struct b43_pio_txqueue *select_queue_by_priority(struct b43_wldev *dev,
+ u8 queue_prio)
{
struct b43_pio_txqueue *q;
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 7137537..afad423 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -113,7 +113,7 @@ out_unlock:
return err;
}
-char * b43_rfkill_led_name(struct b43_wldev *dev)
+char *b43_rfkill_led_name(struct b43_wldev *dev)
{
struct b43_rfkill *rfk = &(dev->wl->rfkill);
reply other threads:[~2009-02-24 10:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49A3C90A.2000608@gmail.com \
--to=daikerjohn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=mb@bu3sch.de \
--cc=stefano.brivio@polimi.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).