* BCM4303 (rev 02) Wireless doesn't detect APs
@ 2009-05-29 18:42 Namaskar
2009-05-29 19:12 ` Larry Finger
0 siblings, 1 reply; 2+ messages in thread
From: Namaskar @ 2009-05-29 18:42 UTC (permalink / raw)
To: linux-wireless
Hi,
I need help.
My BCM4303 (rev 02) does not work on Linux 2.6.28-11-generic #42-Ubuntu SMP Fri
Apr 17 01:57:59 UTC 2009 i686 GNU/Linux.
dmesg:
[ 2369.096080] b43legacy-phy0 debug: Radio initialized
[ 2369.096095] b43legacy-phy0 debug: Radio initialized
[ 2381.356506] input: b43legacy-phy0 as /devices/virtual/input/input11
[ 2381.508046] b43legacy-phy0: Loading firmware version 0x127, patch level 14
(2005-04-18 02:36:27)
[ 2381.608300] b43legacy-phy0 debug: Chip initialized
[ 2381.608606] b43legacy-phy0 debug: 30-bit DMA initialized
[ 2381.611262] Registered led device: b43legacy-phy0:tx
[ 2381.611298] Registered led device: b43legacy-phy0:rx
[ 2381.611336] Registered led device: b43legacy-phy0:radio
[ 2381.611377] b43legacy-phy0 debug: Wireless interface started
[ 2381.648162] b43legacy-phy0 debug: Adding Interface type 2
[ 2381.676543] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2382.368055] b43legacy-phy0: Radio hardware status changed to DISABLED
#iwlist wlan0 scan
wlan0 No scan results
I tried installing ndiswrapper but does not work either.
Does anyone know why?
Regards,
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: BCM4303 (rev 02) Wireless doesn't detect APs
2009-05-29 18:42 BCM4303 (rev 02) Wireless doesn't detect APs Namaskar
@ 2009-05-29 19:12 ` Larry Finger
0 siblings, 0 replies; 2+ messages in thread
From: Larry Finger @ 2009-05-29 19:12 UTC (permalink / raw)
To: Namaskar; +Cc: linux-wireless
Namaskar wrote:
> Hi,
>
> I need help.
>
> My BCM4303 (rev 02) does not work on Linux 2.6.28-11-generic #42-Ubuntu SMP Fri
> Apr 17 01:57:59 UTC 2009 i686 GNU/Linux.
>
> dmesg:
> [ 2369.096080] b43legacy-phy0 debug: Radio initialized
> [ 2369.096095] b43legacy-phy0 debug: Radio initialized
> [ 2381.356506] input: b43legacy-phy0 as /devices/virtual/input/input11
> [ 2381.508046] b43legacy-phy0: Loading firmware version 0x127, patch level 14
> (2005-04-18 02:36:27)
> [ 2381.608300] b43legacy-phy0 debug: Chip initialized
> [ 2381.608606] b43legacy-phy0 debug: 30-bit DMA initialized
> [ 2381.611262] Registered led device: b43legacy-phy0:tx
> [ 2381.611298] Registered led device: b43legacy-phy0:rx
> [ 2381.611336] Registered led device: b43legacy-phy0:radio
> [ 2381.611377] b43legacy-phy0 debug: Wireless interface started
> [ 2381.648162] b43legacy-phy0 debug: Adding Interface type 2
> [ 2381.676543] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 2382.368055] b43legacy-phy0: Radio hardware status changed to DISABLED
The last message says that your radio kill switch is off.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-05-29 19:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-29 18:42 BCM4303 (rev 02) Wireless doesn't detect APs Namaskar
2009-05-29 19:12 ` Larry Finger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).