From: "Leonardo H. Souza Hamada" <leonardo.hamada@ufra.edu.br>
To: linux-wireless@vger.kernel.org
Subject: zd1211rw on ppc (iBook G4)
Date: Mon, 31 Aug 2009 13:39:39 -0300 [thread overview]
Message-ID: <4A9BFCCB.6040808@ufra.edu.br> (raw)
Hi list,
On linux-2.6.24-gentoo-r3, the zd1211rw driver was working as eth1.
This is a big-endian machine.
On 2.6.30-gentoo-r5, 'ifconfig -a' shows the relevant entries below:
wlan0 Link encap:Ethernet HWaddr 00:16:01:D0:11:7D
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr
00-16-01-D0-11-7D-10-00-00-00-00-00-00-00-00-00
[NO FLAGS] MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
dmesg command shows:
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: New USB device found, idVendor=0411, idProduct=00da
usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=0
usb 1-2: Product: USB2.0 WLAN
usb 1-2: Manufacturer: Buffalo
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: reset high speed USB device using ehci_hcd and address 3
phy1: Selected rate control algorithm 'minstrel'
zd1211rw 1-2:1.0: phy1
usb 1-2: firmware: requesting zd1211/zd1211b_ub
usb 1-2: firmware: requesting zd1211/zd1211b_uphr
zd1211rw 1-2:1.0: firmware version 4725
zd1211rw 1-2:1.0: zd1211b chip 0411:00da v4810 high 00-16-01 AL2230S_RF
pa0 g--N-
usb 1-2: firmware: requesting zd1211/zd1211b_ub
usb 1-2: firmware: requesting zd1211/zd1211b_uphr
usb 1-2: firmware: requesting zd1211/zd1211b_ub
usb 1-2: firmware: requesting zd1211/zd1211b_uphr
usb 1-2: USB control request for firmware upload failed. Error number -110
usb 1-2: Could not upload firmware code uph. Error number -110
zd1211rw 1-2:1.0: couldn't load firmware. Error number -110
lsusb shows:
Bus 001 Device 003: ID 0411:00da MelCo., Inc. WLI-U2-KG54L
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bringing it up:
ifconfig wlan0 up
SIOCSIFFLAGS: Connection timed out
DHCP command:
dhcpcd wlan0
dhcpcd: version 5.0.6 starting
dhcpcd: wlan0: interface not found or invalid
Likely is a issue similar reported previously:
http://marc.info/?l=linux-wireless&m=124906700820860&w=2
Quick peek at the source diffs between previous version reveals some
changes.
Regards,
Leonardo
next reply other threads:[~2009-08-31 16:45 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-31 16:39 Leonardo H. Souza Hamada [this message]
2009-08-31 17:25 ` zd1211rw on ppc (iBook G4) Hin-Tak Leung
[not found] ` <4A9C0ADC.6050607@ufra.edu.br>
2009-08-31 18:26 ` Hin-Tak Leung
2009-08-31 19:27 ` Michael Buesch
2009-08-31 19:35 ` Hin-Tak Leung
[not found] ` <69e28c910908311414s191aafa6ib0bdae8ed4ace27d@mail.gmail.com>
[not found] ` <3ace41890908311602g4a976ec5k4f1f5145662cf183@mail.gmail.com>
2009-08-31 23:11 ` Gábor Stefanik
2009-09-01 12:56 ` Michael Buesch
2009-09-01 20:02 ` Leonardo H. Souza Hamada
2009-09-12 22:43 ` zd1211rw on ppc (iBook G4) -- Solved, somewhat) Leonardo H. Souza Hamada
2009-09-13 10:13 ` Hin-Tak Leung
2009-09-14 3:41 ` Hin-Tak Leung
2009-09-14 4:09 ` Luis R. Rodriguez
2009-09-14 16:47 ` Leonardo H. Souza Hamada
2009-09-14 21:11 ` Hin-Tak Leung
[not found] ` <8ea57b3c57061154c0d312925100c827.squirrel@webmail.ufra.edu.br>
2009-09-15 1:08 ` Hin-Tak Leung
2009-09-23 0:50 ` zd1211rw on ppc (iBook G4) Hin-Tak Leung
2009-09-27 19:14 ` Leonardo H. Souza Hamada
2009-09-27 20:08 ` Hin-Tak Leung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A9BFCCB.6040808@ufra.edu.br \
--to=leonardo.hamada@ufra.edu.br \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).