* Re: RTL8187B wireless driver issue
2009-09-14 14:31 ` Larry Finger
@ 2009-09-14 16:05 ` Vignette consultant
2009-09-14 16:50 ` Larry Finger
0 siblings, 1 reply; 10+ messages in thread
From: Vignette consultant @ 2009-09-14 16:05 UTC (permalink / raw)
To: Larry Finger; +Cc: wireless
[-- Attachment #1: Type: text/plain, Size: 1306 bytes --]
Hi
Attached files contain several logs of various commands. The log-1
file is before running command and log-2 file is after running
specific command.
Here are commands that I give as soon as I log in. It's server edition.
$ sudo ifconfig wlan0 up
$ sudo iwconfig wlan0 ESSID linksys
$ sudo dhclient wlan0 - results in no IP addr leased
Vista connects on linksys without problem as per attached screenshot.
Please advise me about this problem.
Thanks
Sam
On 9/14/09, Larry Finger <Larry.Finger@lwfinger.net> wrote:
> Vignette consultant wrote:
>> Hi
>>
>> I just built linux kernel 2.6.31 on ubuntu 9.0.4 2.6.28-11 server.
>> The dhcpclient wlan0 still is unable to get ip address.
>>
>> I don't see any message in dmesg log for wlan0. The laptop uses
>> RTL8187 built-in usb card.
>>
>> The Vista is able to connect through wireless dhcp without any
>> problem. The linux is not.
>>
>> How can I trace the root cause of this issue.
>
> How are you controlling the network? Is it with NetworkManager?
>
> Please post the output of the command 'iwconfig'. If you get a
> "command not found" message, you will need to provide the full path
> such as /sbin/iwconfig. Also, does scanning work? Use the command
> 'sudo iwlist scan'. That command may also require a full path.
>
> Larry
>
[-- Attachment #2: dhclient-log-1.log --]
[-- Type: text/plain, Size: 778 bytes --]
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/wlan0/00:16:44:8f:8f:90
Sending on LPF/wlan0/00:16:44:8f:8f:90
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 19
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
[-- Attachment #3: ifconfig-log-1.log --]
[-- Type: text/plain, Size: 346 bytes --]
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[-- Attachment #4: ifconfig-log-2.log --]
[-- Type: text/plain, Size: 1009 bytes --]
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:16:44:8f:8f:90
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wmaster0 Link encap:UNSPEC HWaddr 00-16-44-8F-8F-90-00-00-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[-- Attachment #5: iwconfig-log-1.log --]
[-- Type: text/plain, Size: 426 bytes --]
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[-- Attachment #6: iwconfig-log-2.log --]
[-- Type: text/plain, Size: 463 bytes --]
wlan0 IEEE 802.11bg ESSID:"linksys"
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[-- Attachment #7: iwlist-log-1.log --]
[-- Type: text/plain, Size: 2666 bytes --]
wlan0 Scan completed :
Cell 01 - Address: 00:1F:33:3C:63:C4
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=55/70 Signal level=-55 dBm
Encryption key:on
ESSID:"net2000"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=0000003bbdf84183
Extra: Last beacon: 1280ms ago
IE: Unknown: 00076E657432303030
IE: Unknown: 010882848B962430486C
IE: Unknown: 030101
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: 32040C121860
IE: Unknown: DD7C0050F204104A00011010440001021041000100103B00010310470010AA9D0E6D2602AE7039A5776EBF8C70BE1021000D4E4554474541522C20496E632E10230009574E5238333442763210240009574E523833344276321042000230311054000800060050F204000110110009574E52383334427632100800020084
IE: Unknown: DD090010180200F0010000
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
Cell 02 - Address: 00:12:17:AA:39:66
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=44/70 Signal level=-66 dBm
Encryption key:off
ESSID:"linksys"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000000b0f7218a
Extra: Last beacon: 850ms ago
IE: Unknown: 00076C696E6B737973
IE: Unknown: 010882848B962430486C
IE: Unknown: 030106
IE: Unknown: 050400030100
IE: Unknown: 2A0104
IE: Unknown: 2F0104
IE: Unknown: 32040C121860
IE: Unknown: DD06001018020104
[-- Attachment #8: lshw-log-1.log --]
[-- Type: text/plain, Size: 914 bytes --]
*-network DISABLED
description: Ethernet interface
product: 88E8039 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 14
serial: 00:a0:d1:95:84:b2
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.23 firmware=N/A latency=0 link=yes module=sky2 multicast=yes port=twisted pair
*-network DISABLED
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:16:44:8f:8f:90
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
[-- Attachment #9: lshw-log-2.log --]
[-- Type: text/plain, Size: 905 bytes --]
*-network DISABLED
description: Ethernet interface
product: 88E8039 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 14
serial: 00:a0:d1:95:84:b2
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.23 firmware=N/A latency=0 link=yes module=sky2 multicast=yes port=twisted pair
*-network
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:16:44:8f:8f:90
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
[-- Attachment #10: lsmod-log-1.log --]
[-- Type: text/plain, Size: 1176 bytes --]
Module Size Used by
lp 12068 0
parport 42544 1 lp
arc4 2400 2
ecb 3552 2
snd_hda_codec_realtek 276132 1
rtl8187 57188 0
snd_hda_intel 31656 0
mac80211 204408 1 rtl8187
snd_hda_codec 78624 2 snd_hda_codec_realtek,snd_hda_intel
led_class 5576 1 rtl8187
snd_pcm 90984 2 snd_hda_intel,snd_hda_codec
snd_timer 25232 1 snd_pcm
eeprom_93cx6 2816 1 rtl8187
psmouse 56740 0
snd 76008 5 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 9024 1 snd
video 22908 0
intel_agp 32592 1
serio_raw 6916 0
iTCO_wdt 13360 0
iTCO_vendor_support 4580 1 iTCO_wdt
pcspkr 3392 0
snd_page_alloc 11056 2 snd_hda_intel,snd_pcm
output 3968 1 video
cfg80211 107928 2 rtl8187,mac80211
usb_storage 61024 1
usbhid 43456 0
sky2 55460 0
[-- Attachment #11: lsmod-log-2.log --]
[-- Type: text/plain, Size: 1176 bytes --]
Module Size Used by
lp 12068 0
parport 42544 1 lp
arc4 2400 2
ecb 3552 2
snd_hda_codec_realtek 276132 1
rtl8187 57188 0
snd_hda_intel 31656 0
mac80211 204408 1 rtl8187
snd_hda_codec 78624 2 snd_hda_codec_realtek,snd_hda_intel
led_class 5576 1 rtl8187
snd_pcm 90984 2 snd_hda_intel,snd_hda_codec
snd_timer 25232 1 snd_pcm
eeprom_93cx6 2816 1 rtl8187
psmouse 56740 0
snd 76008 5 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 9024 1 snd
video 22908 0
intel_agp 32592 1
serio_raw 6916 0
iTCO_wdt 13360 0
iTCO_vendor_support 4580 1 iTCO_wdt
pcspkr 3392 0
snd_page_alloc 11056 2 snd_hda_intel,snd_pcm
output 3968 1 video
cfg80211 107928 2 rtl8187,mac80211
usb_storage 61024 1
usbhid 43456 0
sky2 55460 0
[-- Attachment #12: lsusb-log-1.log --]
[-- Type: text/plain, Size: 703 bytes --]
Bus 002 Device 004: ID 0bda:8197 Realtek Semiconductor Corp. RTL8187B Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 004: ID 1307:0165 Transcend Information, Inc.
Bus 005 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
Bus 005 Device 002: ID 0461:4d15 Primax Electronics, Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[-- Attachment #13: dmesg-log-1.log --]
[-- Type: text/plain, Size: 124847 bytes --]
age: Attempting to get CSW...
[ 197.477719] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 197.478738] usb-storage: Status code 0; transferred 13/13
[ 197.478741] usb-storage: -- transfer complete
[ 197.478743] usb-storage: Bulk status result = 0
[ 197.478746] usb-storage: Bulk Status S 0x53425355 T 0x7a8 R 0 Stat 0x0
[ 197.478748] usb-storage: scsi cmd done, result=0x0
[ 197.478752] usb-storage: *** thread sleeping.
[ 197.478790] usb-storage: queuecommand called
[ 197.478796] usb-storage: *** thread awakened.
[ 197.478799] usb-storage: Command READ_10 (10 bytes)
[ 197.478800] usb-storage: 28 00 00 b4 00 57 00 00 08 00
[ 197.478810] usb-storage: Bulk Command S 0x43425355 T 0x7a9 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 197.478813] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 197.479702] usb-storage: Status code 0; transferred 31/31
[ 197.479705] usb-storage: -- transfer complete
[ 197.479707] usb-storage: Bulk command transfer result=0
[ 197.479710] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 197.483713] usb-storage: Status code 0; transferred 4096/4096
[ 197.483715] usb-storage: -- transfer complete
[ 197.483717] usb-storage: Bulk data transfer result 0x0
[ 197.483719] usb-storage: Attempting to get CSW...
[ 197.483722] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 197.484720] usb-storage: Status code 0; transferred 13/13
[ 197.484723] usb-storage: -- transfer complete
[ 197.484725] usb-storage: Bulk status result = 0
[ 197.484728] usb-storage: Bulk Status S 0x53425355 T 0x7a9 R 0 Stat 0x0
[ 197.484731] usb-storage: scsi cmd done, result=0x0
[ 197.484735] usb-storage: *** thread sleeping.
[ 197.484994] usb-storage: queuecommand called
[ 197.485017] usb-storage: *** thread awakened.
[ 197.485020] usb-storage: Command READ_10 (10 bytes)
[ 197.485022] usb-storage: 28 00 00 b4 02 67 00 00 08 00
[ 197.485032] usb-storage: Bulk Command S 0x43425355 T 0x7aa L 4096 F 128 Trg 0 LUN 0 CL 10
[ 197.485035] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 197.485718] usb-storage: Status code 0; transferred 31/31
[ 197.485720] usb-storage: -- transfer complete
[ 197.485723] usb-storage: Bulk command transfer result=0
[ 197.485726] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 197.489726] usb-storage: Status code 0; transferred 4096/4096
[ 197.489729] usb-storage: -- transfer complete
[ 197.489731] usb-storage: Bulk data transfer result 0x0
[ 197.489733] usb-storage: Attempting to get CSW...
[ 197.489736] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 197.490719] usb-storage: Status code 0; transferred 13/13
[ 197.490721] usb-storage: -- transfer complete
[ 197.490723] usb-storage: Bulk status result = 0
[ 197.490726] usb-storage: Bulk Status S 0x53425355 T 0x7aa R 0 Stat 0x0
[ 197.490728] usb-storage: scsi cmd done, result=0x0
[ 197.490732] usb-storage: *** thread sleeping.
[ 197.490821] usb-storage: queuecommand called
[ 197.490849] usb-storage: *** thread awakened.
[ 197.490852] usb-storage: Command READ_10 (10 bytes)
[ 197.490854] usb-storage: 28 00 00 b4 02 97 00 00 08 00
[ 197.490864] usb-storage: Bulk Command S 0x43425355 T 0x7ab L 4096 F 128 Trg 0 LUN 0 CL 10
[ 197.490867] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 197.491719] usb-storage: Status code 0; transferred 31/31
[ 197.491722] usb-storage: -- transfer complete
[ 197.491723] usb-storage: Bulk command transfer result=0
[ 197.491726] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 197.495725] usb-storage: Status code 0; transferred 4096/4096
[ 197.495728] usb-storage: -- transfer complete
[ 197.495730] usb-storage: Bulk data transfer result 0x0
[ 197.495732] usb-storage: Attempting to get CSW...
[ 197.495735] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 197.496718] usb-storage: Status code 0; transferred 13/13
[ 197.496721] usb-storage: -- transfer complete
[ 197.496723] usb-storage: Bulk status result = 0
[ 197.496726] usb-storage: Bulk Status S 0x53425355 T 0x7ab R 0 Stat 0x0
[ 197.496728] usb-storage: scsi cmd done, result=0x0
[ 197.496732] usb-storage: *** thread sleeping.
[ 202.012634] usb-storage: queuecommand called
[ 202.012670] usb-storage: *** thread awakened.
[ 202.012678] usb-storage: Command WRITE_10 (10 bytes)
[ 202.012682] usb-storage: 2a 00 00 74 19 a7 00 00 48 00
[ 202.012702] usb-storage: Bulk Command S 0x43425355 T 0x7ac L 36864 F 0 Trg 0 LUN 0 CL 10
[ 202.012708] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 202.014736] usb-storage: Status code 0; transferred 31/31
[ 202.014741] usb-storage: -- transfer complete
[ 202.014745] usb-storage: Bulk command transfer result=0
[ 202.014751] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 202.135767] usb-storage: Status code 0; transferred 36864/36864
[ 202.135772] usb-storage: -- transfer complete
[ 202.135776] usb-storage: Bulk data transfer result 0x0
[ 202.135780] usb-storage: Attempting to get CSW...
[ 202.135785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 202.136718] usb-storage: Status code 0; transferred 13/13
[ 202.136723] usb-storage: -- transfer complete
[ 202.136727] usb-storage: Bulk status result = 0
[ 202.136732] usb-storage: Bulk Status S 0x53425355 T 0x7ac R 0 Stat 0x0
[ 202.136737] usb-storage: scsi cmd done, result=0x0
[ 202.136745] usb-storage: *** thread sleeping.
[ 202.136828] usb-storage: queuecommand called
[ 202.136839] usb-storage: *** thread awakened.
[ 202.136844] usb-storage: Command WRITE_10 (10 bytes)
[ 202.136848] usb-storage: 2a 00 00 74 19 ef 00 00 08 00
[ 202.136867] usb-storage: Bulk Command S 0x43425355 T 0x7ad L 4096 F 0 Trg 0 LUN 0 CL 10
[ 202.136873] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 202.137734] usb-storage: Status code 0; transferred 31/31
[ 202.137738] usb-storage: -- transfer complete
[ 202.137743] usb-storage: Bulk command transfer result=0
[ 202.137748] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 202.144734] usb-storage: Status code 0; transferred 4096/4096
[ 202.144739] usb-storage: -- transfer complete
[ 202.144744] usb-storage: Bulk data transfer result 0x0
[ 202.144748] usb-storage: Attempting to get CSW...
[ 202.144753] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 202.145735] usb-storage: Status code 0; transferred 13/13
[ 202.145740] usb-storage: -- transfer complete
[ 202.145744] usb-storage: Bulk status result = 0
[ 202.145749] usb-storage: Bulk Status S 0x53425355 T 0x7ad R 0 Stat 0x0
[ 202.145755] usb-storage: scsi cmd done, result=0x0
[ 202.145761] usb-storage: *** thread sleeping.
[ 207.012669] usb-storage: queuecommand called
[ 207.012686] usb-storage: *** thread awakened.
[ 207.012693] usb-storage: Command WRITE_10 (10 bytes)
[ 207.012696] usb-storage: 2a 00 00 74 19 f7 00 00 48 00
[ 207.012717] usb-storage: Bulk Command S 0x43425355 T 0x7ae L 36864 F 0 Trg 0 LUN 0 CL 10
[ 207.012723] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 207.014724] usb-storage: Status code 0; transferred 31/31
[ 207.014728] usb-storage: -- transfer complete
[ 207.014733] usb-storage: Bulk command transfer result=0
[ 207.014738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 207.133756] usb-storage: Status code 0; transferred 36864/36864
[ 207.133761] usb-storage: -- transfer complete
[ 207.133766] usb-storage: Bulk data transfer result 0x0
[ 207.133770] usb-storage: Attempting to get CSW...
[ 207.133775] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 207.137726] usb-storage: Status code 0; transferred 13/13
[ 207.137731] usb-storage: -- transfer complete
[ 207.137736] usb-storage: Bulk status result = 0
[ 207.137741] usb-storage: Bulk Status S 0x53425355 T 0x7ae R 0 Stat 0x0
[ 207.137747] usb-storage: scsi cmd done, result=0x0
[ 207.137756] usb-storage: *** thread sleeping.
[ 207.137852] usb-storage: queuecommand called
[ 207.137880] usb-storage: *** thread awakened.
[ 207.137887] usb-storage: Command WRITE_10 (10 bytes)
[ 207.137891] usb-storage: 2a 00 00 74 1a 3f 00 00 08 00
[ 207.137910] usb-storage: Bulk Command S 0x43425355 T 0x7af L 4096 F 0 Trg 0 LUN 0 CL 10
[ 207.137916] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 207.138724] usb-storage: Status code 0; transferred 31/31
[ 207.138729] usb-storage: -- transfer complete
[ 207.138733] usb-storage: Bulk command transfer result=0
[ 207.138739] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 207.144767] usb-storage: Status code 0; transferred 4096/4096
[ 207.144772] usb-storage: -- transfer complete
[ 207.144776] usb-storage: Bulk data transfer result 0x0
[ 207.144780] usb-storage: Attempting to get CSW...
[ 207.144784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 207.145731] usb-storage: Status code 0; transferred 13/13
[ 207.145735] usb-storage: -- transfer complete
[ 207.145739] usb-storage: Bulk status result = 0
[ 207.145745] usb-storage: Bulk Status S 0x53425355 T 0x7af R 0 Stat 0x0
[ 207.145750] usb-storage: scsi cmd done, result=0x0
[ 207.145757] usb-storage: *** thread sleeping.
[ 215.010044] usb-storage: queuecommand called
[ 215.010075] usb-storage: *** thread awakened.
[ 215.010083] usb-storage: Command WRITE_10 (10 bytes)
[ 215.010088] usb-storage: 2a 00 00 b8 ee 27 00 00 70 00
[ 215.010107] usb-storage: Bulk Command S 0x43425355 T 0x7b0 L 57344 F 0 Trg 0 LUN 0 CL 10
[ 215.010114] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 215.011723] usb-storage: Status code 0; transferred 31/31
[ 215.011727] usb-storage: -- transfer complete
[ 215.011731] usb-storage: Bulk command transfer result=0
[ 215.011737] usb-storage: usb_stor_bulk_transfer_sglist: xfer 57344 bytes, 14 entries
[ 215.171773] usb-storage: Status code 0; transferred 57344/57344
[ 215.171779] usb-storage: -- transfer complete
[ 215.171783] usb-storage: Bulk data transfer result 0x0
[ 215.171787] usb-storage: Attempting to get CSW...
[ 215.171793] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 215.197728] usb-storage: Status code 0; transferred 13/13
[ 215.197733] usb-storage: -- transfer complete
[ 215.197737] usb-storage: Bulk status result = 0
[ 215.197742] usb-storage: Bulk Status S 0x53425355 T 0x7b0 R 0 Stat 0x0
[ 215.197748] usb-storage: scsi cmd done, result=0x0
[ 215.197755] usb-storage: *** thread sleeping.
[ 215.197806] usb-storage: queuecommand called
[ 215.197816] usb-storage: *** thread awakened.
[ 215.197822] usb-storage: Command WRITE_10 (10 bytes)
[ 215.197825] usb-storage: 2a 00 00 74 1a 47 00 00 48 00
[ 215.197844] usb-storage: Bulk Command S 0x43425355 T 0x7b1 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 215.197850] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 215.198733] usb-storage: Status code 0; transferred 31/31
[ 215.198738] usb-storage: -- transfer complete
[ 215.198742] usb-storage: Bulk command transfer result=0
[ 215.198747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 215.434752] usb-storage: Status code 0; transferred 36864/36864
[ 215.434757] usb-storage: -- transfer complete
[ 215.434762] usb-storage: Bulk data transfer result 0x0
[ 215.434766] usb-storage: Attempting to get CSW...
[ 215.434771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 215.459726] usb-storage: Status code 0; transferred 13/13
[ 215.459731] usb-storage: -- transfer complete
[ 215.459735] usb-storage: Bulk status result = 0
[ 215.459741] usb-storage: Bulk Status S 0x53425355 T 0x7b1 R 0 Stat 0x0
[ 215.459746] usb-storage: scsi cmd done, result=0x0
[ 215.459753] usb-storage: *** thread sleeping.
[ 215.459854] usb-storage: queuecommand called
[ 215.459883] usb-storage: *** thread awakened.
[ 215.459889] usb-storage: Command WRITE_10 (10 bytes)
[ 215.459893] usb-storage: 2a 00 00 74 1a 8f 00 00 08 00
[ 215.459912] usb-storage: Bulk Command S 0x43425355 T 0x7b2 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 215.459918] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 215.460720] usb-storage: Status code 0; transferred 31/31
[ 215.460724] usb-storage: -- transfer complete
[ 215.460728] usb-storage: Bulk command transfer result=0
[ 215.460734] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 215.466762] usb-storage: Status code 0; transferred 4096/4096
[ 215.466766] usb-storage: -- transfer complete
[ 215.466771] usb-storage: Bulk data transfer result 0x0
[ 215.466774] usb-storage: Attempting to get CSW...
[ 215.466779] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 215.468735] usb-storage: Status code 0; transferred 13/13
[ 215.468739] usb-storage: -- transfer complete
[ 215.468743] usb-storage: Bulk status result = 0
[ 215.468749] usb-storage: Bulk Status S 0x53425355 T 0x7b2 R 0 Stat 0x0
[ 215.468754] usb-storage: scsi cmd done, result=0x0
[ 215.468761] usb-storage: *** thread sleeping.
[ 225.010047] usb-storage: queuecommand called
[ 225.010067] usb-storage: *** thread awakened.
[ 225.010074] usb-storage: Command WRITE_10 (10 bytes)
[ 225.010077] usb-storage: 2a 00 00 b8 b9 e7 00 00 60 00
[ 225.010098] usb-storage: Bulk Command S 0x43425355 T 0x7b3 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 225.010104] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.011726] usb-storage: Status code 0; transferred 31/31
[ 225.011730] usb-storage: -- transfer complete
[ 225.011734] usb-storage: Bulk command transfer result=0
[ 225.011740] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 225.152757] usb-storage: Status code 0; transferred 49152/49152
[ 225.152762] usb-storage: -- transfer complete
[ 225.152767] usb-storage: Bulk data transfer result 0x0
[ 225.152771] usb-storage: Attempting to get CSW...
[ 225.152776] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.178730] usb-storage: Status code 0; transferred 13/13
[ 225.178735] usb-storage: -- transfer complete
[ 225.178739] usb-storage: Bulk status result = 0
[ 225.178744] usb-storage: Bulk Status S 0x53425355 T 0x7b3 R 0 Stat 0x0
[ 225.178751] usb-storage: scsi cmd done, result=0x0
[ 225.178759] usb-storage: *** thread sleeping.
[ 225.178810] usb-storage: queuecommand called
[ 225.178825] usb-storage: *** thread awakened.
[ 225.178831] usb-storage: Command WRITE_10 (10 bytes)
[ 225.178834] usb-storage: 2a 00 00 b8 e7 4f 00 00 60 00
[ 225.178853] usb-storage: Bulk Command S 0x43425355 T 0x7b4 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 225.178859] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.179728] usb-storage: Status code 0; transferred 31/31
[ 225.179733] usb-storage: -- transfer complete
[ 225.179738] usb-storage: Bulk command transfer result=0
[ 225.179744] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 225.466757] usb-storage: Status code 0; transferred 49152/49152
[ 225.466762] usb-storage: -- transfer complete
[ 225.466766] usb-storage: Bulk data transfer result 0x0
[ 225.466770] usb-storage: Attempting to get CSW...
[ 225.466775] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.468720] usb-storage: Status code 0; transferred 13/13
[ 225.468724] usb-storage: -- transfer complete
[ 225.468728] usb-storage: Bulk status result = 0
[ 225.468734] usb-storage: Bulk Status S 0x53425355 T 0x7b4 R 0 Stat 0x0
[ 225.468739] usb-storage: scsi cmd done, result=0x0
[ 225.468745] usb-storage: *** thread sleeping.
[ 225.468785] usb-storage: queuecommand called
[ 225.468800] usb-storage: *** thread awakened.
[ 225.468805] usb-storage: Command WRITE_10 (10 bytes)
[ 225.468809] usb-storage: 2a 00 00 c7 09 2f 00 00 08 00
[ 225.468827] usb-storage: Bulk Command S 0x43425355 T 0x7b5 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 225.468833] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.469727] usb-storage: Status code 0; transferred 31/31
[ 225.469731] usb-storage: -- transfer complete
[ 225.469736] usb-storage: Bulk command transfer result=0
[ 225.469742] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 225.526749] usb-storage: Status code 0; transferred 4096/4096
[ 225.526754] usb-storage: -- transfer complete
[ 225.526759] usb-storage: Bulk data transfer result 0x0
[ 225.526762] usb-storage: Attempting to get CSW...
[ 225.526767] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.550728] usb-storage: Status code 0; transferred 13/13
[ 225.550733] usb-storage: -- transfer complete
[ 225.550737] usb-storage: Bulk status result = 0
[ 225.550742] usb-storage: Bulk Status S 0x53425355 T 0x7b5 R 0 Stat 0x0
[ 225.550747] usb-storage: scsi cmd done, result=0x0
[ 225.550753] usb-storage: *** thread sleeping.
[ 225.550771] usb-storage: queuecommand called
[ 225.550781] usb-storage: *** thread awakened.
[ 225.550786] usb-storage: Command WRITE_10 (10 bytes)
[ 225.550789] usb-storage: 2a 00 00 74 1a 97 00 00 48 00
[ 225.550807] usb-storage: Bulk Command S 0x43425355 T 0x7b6 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 225.550813] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.551727] usb-storage: Status code 0; transferred 31/31
[ 225.551731] usb-storage: -- transfer complete
[ 225.551735] usb-storage: Bulk command transfer result=0
[ 225.551741] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 225.897751] usb-storage: Status code 0; transferred 36864/36864
[ 225.897756] usb-storage: -- transfer complete
[ 225.897760] usb-storage: Bulk data transfer result 0x0
[ 225.897764] usb-storage: Attempting to get CSW...
[ 225.897768] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.899734] usb-storage: Status code 0; transferred 13/13
[ 225.899738] usb-storage: -- transfer complete
[ 225.899742] usb-storage: Bulk status result = 0
[ 225.899748] usb-storage: Bulk Status S 0x53425355 T 0x7b6 R 0 Stat 0x0
[ 225.899753] usb-storage: scsi cmd done, result=0x0
[ 225.899760] usb-storage: *** thread sleeping.
[ 225.899839] usb-storage: queuecommand called
[ 225.899850] usb-storage: *** thread awakened.
[ 225.899856] usb-storage: Command WRITE_10 (10 bytes)
[ 225.899859] usb-storage: 2a 00 00 74 1a df 00 00 08 00
[ 225.899878] usb-storage: Bulk Command S 0x43425355 T 0x7b7 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 225.899884] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.900736] usb-storage: Status code 0; transferred 31/31
[ 225.900741] usb-storage: -- transfer complete
[ 225.900745] usb-storage: Bulk command transfer result=0
[ 225.900750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 225.905754] usb-storage: Status code 0; transferred 4096/4096
[ 225.905758] usb-storage: -- transfer complete
[ 225.905762] usb-storage: Bulk data transfer result 0x0
[ 225.905766] usb-storage: Attempting to get CSW...
[ 225.905771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.907739] usb-storage: Status code 0; transferred 13/13
[ 225.907743] usb-storage: -- transfer complete
[ 225.907747] usb-storage: Bulk status result = 0
[ 225.907753] usb-storage: Bulk Status S 0x53425355 T 0x7b7 R 0 Stat 0x0
[ 225.907758] usb-storage: scsi cmd done, result=0x0
[ 225.907766] usb-storage: *** thread sleeping.
[ 230.000115] usb-storage: queuecommand called
[ 230.000173] usb-storage: *** thread awakened.
[ 230.000180] usb-storage: Command WRITE_10 (10 bytes)
[ 230.000184] usb-storage: 2a 00 00 b4 00 4f 00 00 08 00
[ 230.000202] usb-storage: Bulk Command S 0x43425355 T 0x7b8 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.000208] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.001723] usb-storage: Status code 0; transferred 31/31
[ 230.001729] usb-storage: -- transfer complete
[ 230.001733] usb-storage: Bulk command transfer result=0
[ 230.001739] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.015752] usb-storage: Status code 0; transferred 4096/4096
[ 230.015757] usb-storage: -- transfer complete
[ 230.015762] usb-storage: Bulk data transfer result 0x0
[ 230.015766] usb-storage: Attempting to get CSW...
[ 230.015771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.040731] usb-storage: Status code 0; transferred 13/13
[ 230.040736] usb-storage: -- transfer complete
[ 230.040740] usb-storage: Bulk status result = 0
[ 230.040746] usb-storage: Bulk Status S 0x53425355 T 0x7b8 R 0 Stat 0x0
[ 230.040751] usb-storage: scsi cmd done, result=0x0
[ 230.040758] usb-storage: *** thread sleeping.
[ 230.040784] usb-storage: queuecommand called
[ 230.040799] usb-storage: *** thread awakened.
[ 230.040804] usb-storage: Command WRITE_10 (10 bytes)
[ 230.040808] usb-storage: 2a 00 00 c4 0f 57 00 00 18 00
[ 230.040827] usb-storage: Bulk Command S 0x43425355 T 0x7b9 L 12288 F 0 Trg 0 LUN 0 CL 10
[ 230.040833] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.041723] usb-storage: Status code 0; transferred 31/31
[ 230.041728] usb-storage: -- transfer complete
[ 230.041732] usb-storage: Bulk command transfer result=0
[ 230.041738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 230.404760] usb-storage: Status code 0; transferred 12288/12288
[ 230.404765] usb-storage: -- transfer complete
[ 230.404769] usb-storage: Bulk data transfer result 0x0
[ 230.404773] usb-storage: Attempting to get CSW...
[ 230.404778] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.406736] usb-storage: Status code 0; transferred 13/13
[ 230.406740] usb-storage: -- transfer complete
[ 230.406744] usb-storage: Bulk status result = 0
[ 230.406749] usb-storage: Bulk Status S 0x53425355 T 0x7b9 R 0 Stat 0x0
[ 230.406755] usb-storage: scsi cmd done, result=0x0
[ 230.406761] usb-storage: *** thread sleeping.
[ 230.406788] usb-storage: queuecommand called
[ 230.406803] usb-storage: *** thread awakened.
[ 230.406808] usb-storage: Command WRITE_10 (10 bytes)
[ 230.406812] usb-storage: 2a 00 00 c4 0f e7 00 00 08 00
[ 230.406831] usb-storage: Bulk Command S 0x43425355 T 0x7ba L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.406837] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.407721] usb-storage: Status code 0; transferred 31/31
[ 230.407725] usb-storage: -- transfer complete
[ 230.407729] usb-storage: Bulk command transfer result=0
[ 230.407734] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.439751] usb-storage: Status code 0; transferred 4096/4096
[ 230.439755] usb-storage: -- transfer complete
[ 230.439759] usb-storage: Bulk data transfer result 0x0
[ 230.439763] usb-storage: Attempting to get CSW...
[ 230.439768] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.444726] usb-storage: Status code 0; transferred 13/13
[ 230.444730] usb-storage: -- transfer complete
[ 230.444734] usb-storage: Bulk status result = 0
[ 230.444739] usb-storage: Bulk Status S 0x53425355 T 0x7ba R 0 Stat 0x0
[ 230.444745] usb-storage: scsi cmd done, result=0x0
[ 230.444751] usb-storage: *** thread sleeping.
[ 230.444769] usb-storage: queuecommand called
[ 230.444782] usb-storage: *** thread awakened.
[ 230.444788] usb-storage: Command WRITE_10 (10 bytes)
[ 230.444791] usb-storage: 2a 00 00 c5 80 3f 00 00 08 00
[ 230.444810] usb-storage: Bulk Command S 0x43425355 T 0x7bb L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.444815] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.445735] usb-storage: Status code 0; transferred 31/31
[ 230.445739] usb-storage: -- transfer complete
[ 230.445743] usb-storage: Bulk command transfer result=0
[ 230.445748] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.450753] usb-storage: Status code 0; transferred 4096/4096
[ 230.450757] usb-storage: -- transfer complete
[ 230.450761] usb-storage: Bulk data transfer result 0x0
[ 230.450765] usb-storage: Attempting to get CSW...
[ 230.450770] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.451720] usb-storage: Status code 0; transferred 13/13
[ 230.451724] usb-storage: -- transfer complete
[ 230.451728] usb-storage: Bulk status result = 0
[ 230.451733] usb-storage: Bulk Status S 0x53425355 T 0x7bb R 0 Stat 0x0
[ 230.451738] usb-storage: scsi cmd done, result=0x0
[ 230.451744] usb-storage: *** thread sleeping.
[ 230.451760] usb-storage: queuecommand called
[ 230.451773] usb-storage: *** thread awakened.
[ 230.451777] usb-storage: Command WRITE_10 (10 bytes)
[ 230.451781] usb-storage: 2a 00 00 00 00 3f 00 00 08 00
[ 230.451799] usb-storage: Bulk Command S 0x43425355 T 0x7bc L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.451805] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.452716] usb-storage: Status code 0; transferred 31/31
[ 230.452720] usb-storage: -- transfer complete
[ 230.452724] usb-storage: Bulk command transfer result=0
[ 230.452730] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.457742] usb-storage: Status code 0; transferred 4096/4096
[ 230.457747] usb-storage: -- transfer complete
[ 230.457751] usb-storage: Bulk data transfer result 0x0
[ 230.457755] usb-storage: Attempting to get CSW...
[ 230.457759] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.458744] usb-storage: Status code 0; transferred 13/13
[ 230.458749] usb-storage: -- transfer complete
[ 230.458753] usb-storage: Bulk status result = 0
[ 230.458758] usb-storage: Bulk Status S 0x53425355 T 0x7bc R 0 Stat 0x0
[ 230.458763] usb-storage: scsi cmd done, result=0x0
[ 230.458769] usb-storage: *** thread sleeping.
[ 230.458785] usb-storage: queuecommand called
[ 230.458798] usb-storage: *** thread awakened.
[ 230.458803] usb-storage: Command WRITE_10 (10 bytes)
[ 230.458806] usb-storage: 2a 00 00 40 00 47 00 00 18 00
[ 230.458824] usb-storage: Bulk Command S 0x43425355 T 0x7bd L 12288 F 0 Trg 0 LUN 0 CL 10
[ 230.458830] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.459733] usb-storage: Status code 0; transferred 31/31
[ 230.459737] usb-storage: -- transfer complete
[ 230.459741] usb-storage: Bulk command transfer result=0
[ 230.459747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 230.712747] usb-storage: Status code 0; transferred 12288/12288
[ 230.712752] usb-storage: -- transfer complete
[ 230.712756] usb-storage: Bulk data transfer result 0x0
[ 230.712760] usb-storage: Attempting to get CSW...
[ 230.712764] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.737740] usb-storage: Status code 0; transferred 13/13
[ 230.737745] usb-storage: -- transfer complete
[ 230.737749] usb-storage: Bulk status result = 0
[ 230.737754] usb-storage: Bulk Status S 0x53425355 T 0x7bd R 0 Stat 0x0
[ 230.737759] usb-storage: scsi cmd done, result=0x0
[ 230.737765] usb-storage: *** thread sleeping.
[ 230.737786] usb-storage: queuecommand called
[ 230.737799] usb-storage: *** thread awakened.
[ 230.737804] usb-storage: Command WRITE_10 (10 bytes)
[ 230.737807] usb-storage: 2a 00 00 43 c0 3f 00 00 08 00
[ 230.737826] usb-storage: Bulk Command S 0x43425355 T 0x7be L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.737831] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.738728] usb-storage: Status code 0; transferred 31/31
[ 230.738732] usb-storage: -- transfer complete
[ 230.738737] usb-storage: Bulk command transfer result=0
[ 230.738742] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.743737] usb-storage: Status code 0; transferred 4096/4096
[ 230.743742] usb-storage: -- transfer complete
[ 230.743746] usb-storage: Bulk data transfer result 0x0
[ 230.743750] usb-storage: Attempting to get CSW...
[ 230.743755] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.744727] usb-storage: Status code 0; transferred 13/13
[ 230.744731] usb-storage: -- transfer complete
[ 230.744735] usb-storage: Bulk status result = 0
[ 230.744741] usb-storage: Bulk Status S 0x53425355 T 0x7be R 0 Stat 0x0
[ 230.744745] usb-storage: scsi cmd done, result=0x0
[ 230.744751] usb-storage: *** thread sleeping.
[ 230.744768] usb-storage: queuecommand called
[ 230.744782] usb-storage: *** thread awakened.
[ 230.744786] usb-storage: Command WRITE_10 (10 bytes)
[ 230.744790] usb-storage: 2a 00 00 5c 00 3f 00 00 08 00
[ 230.744808] usb-storage: Bulk Command S 0x43425355 T 0x7bf L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.744814] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.745722] usb-storage: Status code 0; transferred 31/31
[ 230.745726] usb-storage: -- transfer complete
[ 230.745730] usb-storage: Bulk command transfer result=0
[ 230.745735] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 231.126762] usb-storage: Status code 0; transferred 4096/4096
[ 231.126766] usb-storage: -- transfer complete
[ 231.126770] usb-storage: Bulk data transfer result 0x0
[ 231.126774] usb-storage: Attempting to get CSW...
[ 231.126778] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 231.151729] usb-storage: Status code 0; transferred 13/13
[ 231.151733] usb-storage: -- transfer complete
[ 231.151737] usb-storage: Bulk status result = 0
[ 231.151742] usb-storage: Bulk Status S 0x53425355 T 0x7bf R 0 Stat 0x0
[ 231.151747] usb-storage: scsi cmd done, result=0x0
[ 231.151753] usb-storage: *** thread sleeping.
[ 231.151772] usb-storage: queuecommand called
[ 231.151781] usb-storage: *** thread awakened.
[ 231.151786] usb-storage: Command WRITE_10 (10 bytes)
[ 231.151790] usb-storage: 2a 00 00 74 1a e7 00 00 48 00
[ 231.151808] usb-storage: Bulk Command S 0x43425355 T 0x7c0 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 231.151814] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 231.152717] usb-storage: Status code 0; transferred 31/31
[ 231.152722] usb-storage: -- transfer complete
[ 231.152726] usb-storage: Bulk command transfer result=0
[ 231.152731] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 231.495752] usb-storage: Status code 0; transferred 36864/36864
[ 231.495756] usb-storage: -- transfer complete
[ 231.495760] usb-storage: Bulk data transfer result 0x0
[ 231.495764] usb-storage: Attempting to get CSW...
[ 231.495769] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 231.497720] usb-storage: Status code 0; transferred 13/13
[ 231.497724] usb-storage: -- transfer complete
[ 231.497728] usb-storage: Bulk status result = 0
[ 231.497733] usb-storage: Bulk Status S 0x53425355 T 0x7c0 R 0 Stat 0x0
[ 231.497738] usb-storage: scsi cmd done, result=0x0
[ 231.497745] usb-storage: *** thread sleeping.
[ 231.497817] usb-storage: queuecommand called
[ 231.497828] usb-storage: *** thread awakened.
[ 231.497833] usb-storage: Command WRITE_10 (10 bytes)
[ 231.497836] usb-storage: 2a 00 00 74 1b 2f 00 00 08 00
[ 231.497855] usb-storage: Bulk Command S 0x43425355 T 0x7c1 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 231.497860] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 231.498725] usb-storage: Status code 0; transferred 31/31
[ 231.498730] usb-storage: -- transfer complete
[ 231.498734] usb-storage: Bulk command transfer result=0
[ 231.498740] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 231.505759] usb-storage: Status code 0; transferred 4096/4096
[ 231.505764] usb-storage: -- transfer complete
[ 231.505768] usb-storage: Bulk data transfer result 0x0
[ 231.505772] usb-storage: Attempting to get CSW...
[ 231.505777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 231.506735] usb-storage: Status code 0; transferred 13/13
[ 231.506739] usb-storage: -- transfer complete
[ 231.506743] usb-storage: Bulk status result = 0
[ 231.506749] usb-storage: Bulk Status S 0x53425355 T 0x7c1 R 0 Stat 0x0
[ 231.506754] usb-storage: scsi cmd done, result=0x0
[ 231.506761] usb-storage: *** thread sleeping.
[ 250.010046] usb-storage: queuecommand called
[ 250.010062] usb-storage: *** thread awakened.
[ 250.010068] usb-storage: Command WRITE_10 (10 bytes)
[ 250.010072] usb-storage: 2a 00 00 b8 ee 8f 00 00 50 00
[ 250.010093] usb-storage: Bulk Command S 0x43425355 T 0x7c2 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 250.010099] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 250.011729] usb-storage: Status code 0; transferred 31/31
[ 250.011733] usb-storage: -- transfer complete
[ 250.011737] usb-storage: Bulk command transfer result=0
[ 250.011743] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 250.175757] usb-storage: Status code 0; transferred 40960/40960
[ 250.175762] usb-storage: -- transfer complete
[ 250.175766] usb-storage: Bulk data transfer result 0x0
[ 250.175770] usb-storage: Attempting to get CSW...
[ 250.175775] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 250.201732] usb-storage: Status code 0; transferred 13/13
[ 250.201737] usb-storage: -- transfer complete
[ 250.201741] usb-storage: Bulk status result = 0
[ 250.201747] usb-storage: Bulk Status S 0x53425355 T 0x7c2 R 0 Stat 0x0
[ 250.201753] usb-storage: scsi cmd done, result=0x0
[ 250.201761] usb-storage: *** thread sleeping.
[ 250.201806] usb-storage: queuecommand called
[ 250.201816] usb-storage: *** thread awakened.
[ 250.201822] usb-storage: Command WRITE_10 (10 bytes)
[ 250.201825] usb-storage: 2a 00 00 74 1b 37 00 00 48 00
[ 250.201844] usb-storage: Bulk Command S 0x43425355 T 0x7c3 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 250.201850] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 250.202731] usb-storage: Status code 0; transferred 31/31
[ 250.202736] usb-storage: -- transfer complete
[ 250.202741] usb-storage: Bulk command transfer result=0
[ 250.202747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 250.467758] usb-storage: Status code 0; transferred 36864/36864
[ 250.467763] usb-storage: -- transfer complete
[ 250.467768] usb-storage: Bulk data transfer result 0x0
[ 250.467772] usb-storage: Attempting to get CSW...
[ 250.467777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 250.492743] usb-storage: Status code 0; transferred 13/13
[ 250.492747] usb-storage: -- transfer complete
[ 250.492751] usb-storage: Bulk status result = 0
[ 250.492756] usb-storage: Bulk Status S 0x53425355 T 0x7c3 R 0 Stat 0x0
[ 250.492761] usb-storage: scsi cmd done, result=0x0
[ 250.492769] usb-storage: *** thread sleeping.
[ 250.492851] usb-storage: queuecommand called
[ 250.492862] usb-storage: *** thread awakened.
[ 250.492867] usb-storage: Command WRITE_10 (10 bytes)
[ 250.492871] usb-storage: 2a 00 00 74 1b 7f 00 00 08 00
[ 250.492890] usb-storage: Bulk Command S 0x43425355 T 0x7c4 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 250.492896] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 250.493735] usb-storage: Status code 0; transferred 31/31
[ 250.493740] usb-storage: -- transfer complete
[ 250.493744] usb-storage: Bulk command transfer result=0
[ 250.493750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 250.499759] usb-storage: Status code 0; transferred 4096/4096
[ 250.499763] usb-storage: -- transfer complete
[ 250.499767] usb-storage: Bulk data transfer result 0x0
[ 250.499771] usb-storage: Attempting to get CSW...
[ 250.499776] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 250.500735] usb-storage: Status code 0; transferred 13/13
[ 250.500739] usb-storage: -- transfer complete
[ 250.500744] usb-storage: Bulk status result = 0
[ 250.500749] usb-storage: Bulk Status S 0x53425355 T 0x7c4 R 0 Stat 0x0
[ 250.500754] usb-storage: scsi cmd done, result=0x0
[ 250.500761] usb-storage: *** thread sleeping.
[ 255.630720] usb-storage: queuecommand called
[ 255.630756] usb-storage: *** thread awakened.
[ 255.630764] usb-storage: Command READ_10 (10 bytes)
[ 255.630768] usb-storage: 28 00 00 09 d9 7f 00 00 20 00
[ 255.630789] usb-storage: Bulk Command S 0x43425355 T 0x7c5 L 16384 F 128 Trg 0 LUN 0 CL 10
[ 255.630795] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.632739] usb-storage: Status code 0; transferred 31/31
[ 255.632745] usb-storage: -- transfer complete
[ 255.632750] usb-storage: Bulk command transfer result=0
[ 255.632757] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
[ 255.648752] usb-storage: Status code 0; transferred 16384/16384
[ 255.648757] usb-storage: -- transfer complete
[ 255.648762] usb-storage: Bulk data transfer result 0x0
[ 255.648766] usb-storage: Attempting to get CSW...
[ 255.648771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 255.649738] usb-storage: Status code 0; transferred 13/13
[ 255.649743] usb-storage: -- transfer complete
[ 255.649747] usb-storage: Bulk status result = 0
[ 255.649752] usb-storage: Bulk Status S 0x53425355 T 0x7c5 R 0 Stat 0x0
[ 255.649757] usb-storage: scsi cmd done, result=0x0
[ 255.649765] usb-storage: *** thread sleeping.
[ 255.649796] usb-storage: queuecommand called
[ 255.649807] usb-storage: *** thread awakened.
[ 255.649812] usb-storage: Command WRITE_10 (10 bytes)
[ 255.649816] usb-storage: 2a 00 00 74 1b 87 00 00 48 00
[ 255.649835] usb-storage: Bulk Command S 0x43425355 T 0x7c6 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 255.649841] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.650726] usb-storage: Status code 0; transferred 31/31
[ 255.650731] usb-storage: -- transfer complete
[ 255.650735] usb-storage: Bulk command transfer result=0
[ 255.650741] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 255.839761] usb-storage: Status code 0; transferred 36864/36864
[ 255.839766] usb-storage: -- transfer complete
[ 255.839771] usb-storage: Bulk data transfer result 0x0
[ 255.839775] usb-storage: Attempting to get CSW...
[ 255.839780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 255.844728] usb-storage: Status code 0; transferred 13/13
[ 255.844733] usb-storage: -- transfer complete
[ 255.844737] usb-storage: Bulk status result = 0
[ 255.844742] usb-storage: Bulk Status S 0x53425355 T 0x7c6 R 0 Stat 0x0
[ 255.844748] usb-storage: scsi cmd done, result=0x0
[ 255.844755] usb-storage: *** thread sleeping.
[ 255.844792] usb-storage: queuecommand called
[ 255.844802] usb-storage: *** thread awakened.
[ 255.844808] usb-storage: Command READ_10 (10 bytes)
[ 255.844811] usb-storage: 28 00 00 09 d9 9f 00 00 20 00
[ 255.844830] usb-storage: Bulk Command S 0x43425355 T 0x7c7 L 16384 F 128 Trg 0 LUN 0 CL 10
[ 255.844836] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.845744] usb-storage: Status code 0; transferred 31/31
[ 255.845749] usb-storage: -- transfer complete
[ 255.845753] usb-storage: Bulk command transfer result=0
[ 255.845759] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
[ 255.877747] usb-storage: Status code 0; transferred 16384/16384
[ 255.877750] usb-storage: -- transfer complete
[ 255.877752] usb-storage: Bulk data transfer result 0x0
[ 255.877754] usb-storage: Attempting to get CSW...
[ 255.877756] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 255.878716] usb-storage: Status code 0; transferred 13/13
[ 255.878718] usb-storage: -- transfer complete
[ 255.878720] usb-storage: Bulk status result = 0
[ 255.878723] usb-storage: Bulk Status S 0x53425355 T 0x7c7 R 0 Stat 0x0
[ 255.878726] usb-storage: scsi cmd done, result=0x0
[ 255.878730] usb-storage: *** thread sleeping.
[ 255.878748] usb-storage: queuecommand called
[ 255.878754] usb-storage: *** thread awakened.
[ 255.878756] usb-storage: Command WRITE_10 (10 bytes)
[ 255.878758] usb-storage: 2a 00 00 74 1b cf 00 00 08 00
[ 255.878768] usb-storage: Bulk Command S 0x43425355 T 0x7c8 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 255.878771] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.879747] usb-storage: Status code 0; transferred 31/31
[ 255.879751] usb-storage: -- transfer complete
[ 255.879753] usb-storage: Bulk command transfer result=0
[ 255.879756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 255.884770] usb-storage: Status code 0; transferred 4096/4096
[ 255.884777] usb-storage: -- transfer complete
[ 255.884782] usb-storage: Bulk data transfer result 0x0
[ 255.884787] usb-storage: Attempting to get CSW...
[ 255.884792] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 255.889738] usb-storage: Status code 0; transferred 13/13
[ 255.889743] usb-storage: -- transfer complete
[ 255.889748] usb-storage: Bulk status result = 0
[ 255.889753] usb-storage: Bulk Status S 0x53425355 T 0x7c8 R 0 Stat 0x0
[ 255.889760] usb-storage: scsi cmd done, result=0x0
[ 255.889769] usb-storage: *** thread sleeping.
[ 255.889805] usb-storage: queuecommand called
[ 255.889815] usb-storage: *** thread awakened.
[ 255.889821] usb-storage: Command READ_10 (10 bytes)
[ 255.889825] usb-storage: 28 00 00 28 81 cf 00 00 08 00
[ 255.889846] usb-storage: Bulk Command S 0x43425355 T 0x7c9 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 255.889853] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.890737] usb-storage: Status code 0; transferred 31/31
[ 255.890742] usb-storage: -- transfer complete
[ 255.890747] usb-storage: Bulk command transfer result=0
[ 255.890752] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 256.088757] usb-storage: Status code 0; transferred 4096/4096
[ 256.088763] usb-storage: -- transfer complete
[ 256.088767] usb-storage: Bulk data transfer result 0x0
[ 256.088771] usb-storage: Attempting to get CSW...
[ 256.088776] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 256.089733] usb-storage: Status code 0; transferred 13/13
[ 256.089738] usb-storage: -- transfer complete
[ 256.089743] usb-storage: Bulk status result = 0
[ 256.089748] usb-storage: Bulk Status S 0x53425355 T 0x7c9 R 0 Stat 0x0
[ 256.089754] usb-storage: scsi cmd done, result=0x0
[ 256.089761] usb-storage: *** thread sleeping.
[ 256.089920] usb-storage: queuecommand called
[ 256.089933] usb-storage: *** thread awakened.
[ 256.089938] usb-storage: Command READ_10 (10 bytes)
[ 256.089942] usb-storage: 28 00 00 31 e3 e7 00 00 10 00
[ 256.089961] usb-storage: Bulk Command S 0x43425355 T 0x7ca L 8192 F 128 Trg 0 LUN 0 CL 10
[ 256.089967] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 256.090741] usb-storage: Status code 0; transferred 31/31
[ 256.090746] usb-storage: -- transfer complete
[ 256.090750] usb-storage: Bulk command transfer result=0
[ 256.090755] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 256.099757] usb-storage: Status code 0; transferred 8192/8192
[ 256.099762] usb-storage: -- transfer complete
[ 256.099767] usb-storage: Bulk data transfer result 0x0
[ 256.099770] usb-storage: Attempting to get CSW...
[ 256.099776] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 256.100727] usb-storage: Status code 0; transferred 13/13
[ 256.100729] usb-storage: -- transfer complete
[ 256.100731] usb-storage: Bulk status result = 0
[ 256.100734] usb-storage: Bulk Status S 0x53425355 T 0x7ca R 0 Stat 0x0
[ 256.100737] usb-storage: scsi cmd done, result=0x0
[ 256.100741] usb-storage: *** thread sleeping.
[ 256.102553] usb-storage: queuecommand called
[ 256.102564] usb-storage: *** thread awakened.
[ 256.102568] usb-storage: Command READ_10 (10 bytes)
[ 256.102570] usb-storage: 28 00 00 2a c0 97 00 00 08 00
[ 256.102581] usb-storage: Bulk Command S 0x43425355 T 0x7cb L 4096 F 128 Trg 0 LUN 0 CL 10
[ 256.102585] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 256.102730] usb-storage: Status code 0; transferred 31/31
[ 256.102732] usb-storage: -- transfer complete
[ 256.102735] usb-storage: Bulk command transfer result=0
[ 256.102738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 256.107734] usb-storage: Status code 0; transferred 4096/4096
[ 256.107736] usb-storage: -- transfer complete
[ 256.107738] usb-storage: Bulk data transfer result 0x0
[ 256.107740] usb-storage: Attempting to get CSW...
[ 256.107743] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 256.108724] usb-storage: Status code 0; transferred 13/13
[ 256.108727] usb-storage: -- transfer complete
[ 256.108729] usb-storage: Bulk status result = 0
[ 256.108731] usb-storage: Bulk Status S 0x53425355 T 0x7cb R 0 Stat 0x0
[ 256.108734] usb-storage: scsi cmd done, result=0x0
[ 256.108739] usb-storage: *** thread sleeping.
[ 258.653947] usb-storage: queuecommand called
[ 258.653967] usb-storage: *** thread awakened.
[ 258.653973] usb-storage: Command WRITE_10 (10 bytes)
[ 258.653977] usb-storage: 2a 00 00 b8 7f cf 00 00 08 00
[ 258.653997] usb-storage: Bulk Command S 0x43425355 T 0x7cc L 4096 F 0 Trg 0 LUN 0 CL 10
[ 258.654004] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 258.655731] usb-storage: Status code 0; transferred 31/31
[ 258.655736] usb-storage: -- transfer complete
[ 258.655740] usb-storage: Bulk command transfer result=0
[ 258.655746] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 258.678746] usb-storage: Status code 0; transferred 4096/4096
[ 258.678751] usb-storage: -- transfer complete
[ 258.678755] usb-storage: Bulk data transfer result 0x0
[ 258.678759] usb-storage: Attempting to get CSW...
[ 258.678764] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 258.679727] usb-storage: Status code 0; transferred 13/13
[ 258.679732] usb-storage: -- transfer complete
[ 258.679737] usb-storage: Bulk status result = 0
[ 258.679743] usb-storage: Bulk Status S 0x53425355 T 0x7cc R 0 Stat 0x0
[ 258.679748] usb-storage: scsi cmd done, result=0x0
[ 258.679756] usb-storage: *** thread sleeping.
[ 258.679784] usb-storage: queuecommand called
[ 258.679795] usb-storage: *** thread awakened.
[ 258.679800] usb-storage: Command WRITE_10 (10 bytes)
[ 258.679804] usb-storage: 2a 00 00 74 1b d7 00 00 70 00
[ 258.679823] usb-storage: Bulk Command S 0x43425355 T 0x7cd L 57344 F 0 Trg 0 LUN 0 CL 10
[ 258.679829] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 258.680721] usb-storage: Status code 0; transferred 31/31
[ 258.680725] usb-storage: -- transfer complete
[ 258.680729] usb-storage: Bulk command transfer result=0
[ 258.680735] usb-storage: usb_stor_bulk_transfer_sglist: xfer 57344 bytes, 14 entries
[ 259.107780] usb-storage: Status code 0; transferred 57344/57344
[ 259.107785] usb-storage: -- transfer complete
[ 259.107789] usb-storage: Bulk data transfer result 0x0
[ 259.107793] usb-storage: Attempting to get CSW...
[ 259.107798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 259.109724] usb-storage: Status code 0; transferred 13/13
[ 259.109728] usb-storage: -- transfer complete
[ 259.109732] usb-storage: Bulk status result = 0
[ 259.109737] usb-storage: Bulk Status S 0x53425355 T 0x7cd R 0 Stat 0x0
[ 259.109742] usb-storage: scsi cmd done, result=0x0
[ 259.109749] usb-storage: *** thread sleeping.
[ 259.109845] usb-storage: queuecommand called
[ 259.109875] usb-storage: *** thread awakened.
[ 259.109881] usb-storage: Command WRITE_10 (10 bytes)
[ 259.109885] usb-storage: 2a 00 00 74 1c 47 00 00 08 00
[ 259.109904] usb-storage: Bulk Command S 0x43425355 T 0x7ce L 4096 F 0 Trg 0 LUN 0 CL 10
[ 259.109909] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 259.110722] usb-storage: Status code 0; transferred 31/31
[ 259.110726] usb-storage: -- transfer complete
[ 259.110730] usb-storage: Bulk command transfer result=0
[ 259.110736] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 259.117749] usb-storage: Status code 0; transferred 4096/4096
[ 259.117753] usb-storage: -- transfer complete
[ 259.117758] usb-storage: Bulk data transfer result 0x0
[ 259.117761] usb-storage: Attempting to get CSW...
[ 259.117766] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 259.119723] usb-storage: Status code 0; transferred 13/13
[ 259.119728] usb-storage: -- transfer complete
[ 259.119731] usb-storage: Bulk status result = 0
[ 259.119737] usb-storage: Bulk Status S 0x53425355 T 0x7ce R 0 Stat 0x0
[ 259.119741] usb-storage: scsi cmd done, result=0x0
[ 259.119748] usb-storage: *** thread sleeping.
[ 260.010039] usb-storage: queuecommand called
[ 260.010053] usb-storage: *** thread awakened.
[ 260.010059] usb-storage: Command WRITE_10 (10 bytes)
[ 260.010063] usb-storage: 2a 00 00 b8 ba 3f 00 00 70 00
[ 260.010082] usb-storage: Bulk Command S 0x43425355 T 0x7cf L 57344 F 0 Trg 0 LUN 0 CL 10
[ 260.010088] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 260.011725] usb-storage: Status code 0; transferred 31/31
[ 260.011730] usb-storage: -- transfer complete
[ 260.011733] usb-storage: Bulk command transfer result=0
[ 260.011739] usb-storage: usb_stor_bulk_transfer_sglist: xfer 57344 bytes, 14 entries
[ 260.174761] usb-storage: Status code 0; transferred 57344/57344
[ 260.174766] usb-storage: -- transfer complete
[ 260.174771] usb-storage: Bulk data transfer result 0x0
[ 260.174775] usb-storage: Attempting to get CSW...
[ 260.174780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 260.200736] usb-storage: Status code 0; transferred 13/13
[ 260.200741] usb-storage: -- transfer complete
[ 260.200745] usb-storage: Bulk status result = 0
[ 260.200751] usb-storage: Bulk Status S 0x53425355 T 0x7cf R 0 Stat 0x0
[ 260.200756] usb-storage: scsi cmd done, result=0x0
[ 260.200763] usb-storage: *** thread sleeping.
[ 260.200815] usb-storage: queuecommand called
[ 260.200826] usb-storage: *** thread awakened.
[ 260.200832] usb-storage: Command WRITE_10 (10 bytes)
[ 260.200835] usb-storage: 2a 00 00 b8 e7 a7 00 00 70 00
[ 260.200854] usb-storage: Bulk Command S 0x43425355 T 0x7d0 L 57344 F 0 Trg 0 LUN 0 CL 10
[ 260.200860] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 260.201746] usb-storage: Status code 0; transferred 31/31
[ 260.201751] usb-storage: -- transfer complete
[ 260.201755] usb-storage: Bulk command transfer result=0
[ 260.201761] usb-storage: usb_stor_bulk_transfer_sglist: xfer 57344 bytes, 14 entries
[ 260.495763] usb-storage: Status code 0; transferred 57344/57344
[ 260.495769] usb-storage: -- transfer complete
[ 260.495773] usb-storage: Bulk data transfer result 0x0
[ 260.495777] usb-storage: Attempting to get CSW...
[ 260.495782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 260.497723] usb-storage: Status code 0; transferred 13/13
[ 260.497728] usb-storage: -- transfer complete
[ 260.497731] usb-storage: Bulk status result = 0
[ 260.497737] usb-storage: Bulk Status S 0x53425355 T 0x7d0 R 0 Stat 0x0
[ 260.497742] usb-storage: scsi cmd done, result=0x0
[ 260.497749] usb-storage: *** thread sleeping.
[ 261.093274] usb-storage: queuecommand called
[ 261.093314] usb-storage: *** thread awakened.
[ 261.093321] usb-storage: Command WRITE_10 (10 bytes)
[ 261.093324] usb-storage: 2a 00 00 b8 7f cf 00 00 08 00
[ 261.093344] usb-storage: Bulk Command S 0x43425355 T 0x7d1 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.093350] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.094753] usb-storage: Status code 0; transferred 31/31
[ 261.094758] usb-storage: -- transfer complete
[ 261.094762] usb-storage: Bulk command transfer result=0
[ 261.094768] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 261.099744] usb-storage: Status code 0; transferred 4096/4096
[ 261.099748] usb-storage: -- transfer complete
[ 261.099753] usb-storage: Bulk data transfer result 0x0
[ 261.099756] usb-storage: Attempting to get CSW...
[ 261.099761] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.104740] usb-storage: Status code 0; transferred 13/13
[ 261.104748] usb-storage: -- transfer complete
[ 261.104753] usb-storage: Bulk status result = 0
[ 261.104759] usb-storage: Bulk Status S 0x53425355 T 0x7d1 R 0 Stat 0x0
[ 261.104765] usb-storage: scsi cmd done, result=0x0
[ 261.104774] usb-storage: *** thread sleeping.
[ 261.104813] usb-storage: queuecommand called
[ 261.104824] usb-storage: *** thread awakened.
[ 261.104830] usb-storage: Command WRITE_10 (10 bytes)
[ 261.104833] usb-storage: 2a 00 00 74 1c 4f 00 00 50 00
[ 261.104853] usb-storage: Bulk Command S 0x43425355 T 0x7d2 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 261.104860] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.105737] usb-storage: Status code 0; transferred 31/31
[ 261.105742] usb-storage: -- transfer complete
[ 261.105746] usb-storage: Bulk command transfer result=0
[ 261.105751] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 261.358758] usb-storage: Status code 0; transferred 40960/40960
[ 261.358763] usb-storage: -- transfer complete
[ 261.358768] usb-storage: Bulk data transfer result 0x0
[ 261.358772] usb-storage: Attempting to get CSW...
[ 261.358777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.359732] usb-storage: Status code 0; transferred 13/13
[ 261.359736] usb-storage: -- transfer complete
[ 261.359740] usb-storage: Bulk status result = 0
[ 261.359746] usb-storage: Bulk Status S 0x53425355 T 0x7d2 R 0 Stat 0x0
[ 261.359751] usb-storage: scsi cmd done, result=0x0
[ 261.359757] usb-storage: *** thread sleeping.
[ 261.359853] usb-storage: queuecommand called
[ 261.359865] usb-storage: *** thread awakened.
[ 261.359870] usb-storage: Command WRITE_10 (10 bytes)
[ 261.359873] usb-storage: 2a 00 00 74 1c 9f 00 00 08 00
[ 261.359892] usb-storage: Bulk Command S 0x43425355 T 0x7d3 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.359898] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.360740] usb-storage: Status code 0; transferred 31/31
[ 261.360745] usb-storage: -- transfer complete
[ 261.360750] usb-storage: Bulk command transfer result=0
[ 261.360756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 261.366756] usb-storage: Status code 0; transferred 4096/4096
[ 261.366760] usb-storage: -- transfer complete
[ 261.366764] usb-storage: Bulk data transfer result 0x0
[ 261.366768] usb-storage: Attempting to get CSW...
[ 261.366773] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.367741] usb-storage: Status code 0; transferred 13/13
[ 261.367745] usb-storage: -- transfer complete
[ 261.367749] usb-storage: Bulk status result = 0
[ 261.367754] usb-storage: Bulk Status S 0x53425355 T 0x7d3 R 0 Stat 0x0
[ 261.367759] usb-storage: scsi cmd done, result=0x0
[ 261.367766] usb-storage: *** thread sleeping.
[ 261.367983] usb-storage: queuecommand called
[ 261.367996] usb-storage: *** thread awakened.
[ 261.368001] usb-storage: Command WRITE_10 (10 bytes)
[ 261.368005] usb-storage: 2a 00 00 b8 7f cf 00 00 08 00
[ 261.368024] usb-storage: Bulk Command S 0x43425355 T 0x7d4 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.368030] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.368729] usb-storage: Status code 0; transferred 31/31
[ 261.368734] usb-storage: -- transfer complete
[ 261.368738] usb-storage: Bulk command transfer result=0
[ 261.368743] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 261.558754] usb-storage: Status code 0; transferred 4096/4096
[ 261.558758] usb-storage: -- transfer complete
[ 261.558762] usb-storage: Bulk data transfer result 0x0
[ 261.558766] usb-storage: Attempting to get CSW...
[ 261.558771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.583731] usb-storage: Status code 0; transferred 13/13
[ 261.583736] usb-storage: -- transfer complete
[ 261.583740] usb-storage: Bulk status result = 0
[ 261.583745] usb-storage: Bulk Status S 0x53425355 T 0x7d4 R 0 Stat 0x0
[ 261.583750] usb-storage: scsi cmd done, result=0x0
[ 261.583757] usb-storage: *** thread sleeping.
[ 261.583780] usb-storage: queuecommand called
[ 261.583790] usb-storage: *** thread awakened.
[ 261.583795] usb-storage: Command WRITE_10 (10 bytes)
[ 261.583799] usb-storage: 2a 00 00 74 1c a7 00 00 10 00
[ 261.583817] usb-storage: Bulk Command S 0x43425355 T 0x7d5 L 8192 F 0 Trg 0 LUN 0 CL 10
[ 261.583823] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.584744] usb-storage: Status code 0; transferred 31/31
[ 261.584748] usb-storage: -- transfer complete
[ 261.584752] usb-storage: Bulk command transfer result=0
[ 261.584758] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 261.823749] usb-storage: Status code 0; transferred 8192/8192
[ 261.823753] usb-storage: -- transfer complete
[ 261.823758] usb-storage: Bulk data transfer result 0x0
[ 261.823761] usb-storage: Attempting to get CSW...
[ 261.823766] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.825723] usb-storage: Status code 0; transferred 13/13
[ 261.825727] usb-storage: -- transfer complete
[ 261.825731] usb-storage: Bulk status result = 0
[ 261.825736] usb-storage: Bulk Status S 0x53425355 T 0x7d5 R 0 Stat 0x0
[ 261.825741] usb-storage: scsi cmd done, result=0x0
[ 261.825748] usb-storage: *** thread sleeping.
[ 261.825816] usb-storage: queuecommand called
[ 261.825844] usb-storage: *** thread awakened.
[ 261.825850] usb-storage: Command WRITE_10 (10 bytes)
[ 261.825853] usb-storage: 2a 00 00 74 1c b7 00 00 08 00
[ 261.825872] usb-storage: Bulk Command S 0x43425355 T 0x7d6 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.825878] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.826739] usb-storage: Status code 0; transferred 31/31
[ 261.826744] usb-storage: -- transfer complete
[ 261.826748] usb-storage: Bulk command transfer result=0
[ 261.826753] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 261.831756] usb-storage: Status code 0; transferred 4096/4096
[ 261.831761] usb-storage: -- transfer complete
[ 261.831766] usb-storage: Bulk data transfer result 0x0
[ 261.831771] usb-storage: Attempting to get CSW...
[ 261.831777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.833734] usb-storage: Status code 0; transferred 13/13
[ 261.833740] usb-storage: -- transfer complete
[ 261.833745] usb-storage: Bulk status result = 0
[ 261.833751] usb-storage: Bulk Status S 0x53425355 T 0x7d6 R 0 Stat 0x0
[ 261.833758] usb-storage: scsi cmd done, result=0x0
[ 261.833765] usb-storage: *** thread sleeping.
[ 261.833950] usb-storage: queuecommand called
[ 261.833964] usb-storage: *** thread awakened.
[ 261.833970] usb-storage: Command WRITE_10 (10 bytes)
[ 261.833975] usb-storage: 2a 00 00 b8 7f cf 00 00 08 00
[ 261.833998] usb-storage: Bulk Command S 0x43425355 T 0x7d7 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.834005] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.834743] usb-storage: Status code 0; transferred 31/31
[ 261.834749] usb-storage: -- transfer complete
[ 261.834754] usb-storage: Bulk command transfer result=0
[ 261.834761] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 262.022754] usb-storage: Status code 0; transferred 4096/4096
[ 262.022758] usb-storage: -- transfer complete
[ 262.022763] usb-storage: Bulk data transfer result 0x0
[ 262.022766] usb-storage: Attempting to get CSW...
[ 262.022771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 262.047730] usb-storage: Status code 0; transferred 13/13
[ 262.047734] usb-storage: -- transfer complete
[ 262.047738] usb-storage: Bulk status result = 0
[ 262.047743] usb-storage: Bulk Status S 0x53425355 T 0x7d7 R 0 Stat 0x0
[ 262.047748] usb-storage: scsi cmd done, result=0x0
[ 262.047755] usb-storage: *** thread sleeping.
[ 262.047777] usb-storage: queuecommand called
[ 262.047787] usb-storage: *** thread awakened.
[ 262.047791] usb-storage: Command WRITE_10 (10 bytes)
[ 262.047795] usb-storage: 2a 00 00 74 1c bf 00 00 10 00
[ 262.047813] usb-storage: Bulk Command S 0x43425355 T 0x7d8 L 8192 F 0 Trg 0 LUN 0 CL 10
[ 262.047819] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 262.048731] usb-storage: Status code 0; transferred 31/31
[ 262.048735] usb-storage: -- transfer complete
[ 262.048739] usb-storage: Bulk command transfer result=0
[ 262.048745] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 262.290077] usb-storage: Status code 0; transferred 8192/8192
[ 262.290081] usb-storage: -- transfer complete
[ 262.290086] usb-storage: Bulk data transfer result 0x0
[ 262.290089] usb-storage: Attempting to get CSW...
[ 262.290094] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 262.292721] usb-storage: Status code 0; transferred 13/13
[ 262.292725] usb-storage: -- transfer complete
[ 262.292729] usb-storage: Bulk status result = 0
[ 262.292735] usb-storage: Bulk Status S 0x53425355 T 0x7d8 R 0 Stat 0x0
[ 262.292740] usb-storage: scsi cmd done, result=0x0
[ 262.292746] usb-storage: *** thread sleeping.
[ 262.292794] usb-storage: queuecommand called
[ 262.292805] usb-storage: *** thread awakened.
[ 262.292810] usb-storage: Command WRITE_10 (10 bytes)
[ 262.292814] usb-storage: 2a 00 00 74 1c cf 00 00 08 00
[ 262.292832] usb-storage: Bulk Command S 0x43425355 T 0x7d9 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 262.292838] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 262.293742] usb-storage: Status code 0; transferred 31/31
[ 262.293748] usb-storage: -- transfer complete
[ 262.293753] usb-storage: Bulk command transfer result=0
[ 262.293759] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 262.299764] usb-storage: Status code 0; transferred 4096/4096
[ 262.299768] usb-storage: -- transfer complete
[ 262.299772] usb-storage: Bulk data transfer result 0x0
[ 262.299776] usb-storage: Attempting to get CSW...
[ 262.299780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 262.301739] usb-storage: Status code 0; transferred 13/13
[ 262.301743] usb-storage: -- transfer complete
[ 262.301747] usb-storage: Bulk status result = 0
[ 262.301753] usb-storage: Bulk Status S 0x53425355 T 0x7d9 R 0 Stat 0x0
[ 262.301758] usb-storage: scsi cmd done, result=0x0
[ 262.301764] usb-storage: *** thread sleeping.
[ 268.012645] usb-storage: queuecommand called
[ 268.012659] usb-storage: *** thread awakened.
[ 268.012665] usb-storage: Command WRITE_10 (10 bytes)
[ 268.012669] usb-storage: 2a 00 00 74 1c d7 00 00 48 00
[ 268.012688] usb-storage: Bulk Command S 0x43425355 T 0x7da L 36864 F 0 Trg 0 LUN 0 CL 10
[ 268.012694] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 268.014729] usb-storage: Status code 0; transferred 31/31
[ 268.014733] usb-storage: -- transfer complete
[ 268.014737] usb-storage: Bulk command transfer result=0
[ 268.014743] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 268.084761] usb-storage: Status code 0; transferred 36864/36864
[ 268.084766] usb-storage: -- transfer complete
[ 268.084770] usb-storage: Bulk data transfer result 0x0
[ 268.084774] usb-storage: Attempting to get CSW...
[ 268.084779] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 268.088732] usb-storage: Status code 0; transferred 13/13
[ 268.088736] usb-storage: -- transfer complete
[ 268.088741] usb-storage: Bulk status result = 0
[ 268.088746] usb-storage: Bulk Status S 0x53425355 T 0x7da R 0 Stat 0x0
[ 268.088751] usb-storage: scsi cmd done, result=0x0
[ 268.088758] usb-storage: *** thread sleeping.
[ 268.088850] usb-storage: queuecommand called
[ 268.088879] usb-storage: *** thread awakened.
[ 268.088885] usb-storage: Command WRITE_10 (10 bytes)
[ 268.088889] usb-storage: 2a 00 00 74 1d 1f 00 00 08 00
[ 268.088907] usb-storage: Bulk Command S 0x43425355 T 0x7db L 4096 F 0 Trg 0 LUN 0 CL 10
[ 268.088913] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 268.089729] usb-storage: Status code 0; transferred 31/31
[ 268.089734] usb-storage: -- transfer complete
[ 268.089738] usb-storage: Bulk command transfer result=0
[ 268.089744] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 268.095756] usb-storage: Status code 0; transferred 4096/4096
[ 268.095761] usb-storage: -- transfer complete
[ 268.095767] usb-storage: Bulk data transfer result 0x0
[ 268.095771] usb-storage: Attempting to get CSW...
[ 268.095775] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 268.096742] usb-storage: Status code 0; transferred 13/13
[ 268.096747] usb-storage: -- transfer complete
[ 268.096750] usb-storage: Bulk status result = 0
[ 268.096756] usb-storage: Bulk Status S 0x53425355 T 0x7db R 0 Stat 0x0
[ 268.096762] usb-storage: scsi cmd done, result=0x0
[ 268.096769] usb-storage: *** thread sleeping.
[ 285.000426] usb-storage: queuecommand called
[ 285.000461] usb-storage: *** thread awakened.
[ 285.000470] usb-storage: Command WRITE_10 (10 bytes)
[ 285.000474] usb-storage: 2a 00 00 b8 ee d7 00 00 68 00
[ 285.000494] usb-storage: Bulk Command S 0x43425355 T 0x7dc L 53248 F 0 Trg 0 LUN 0 CL 10
[ 285.000500] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.001733] usb-storage: Status code 0; transferred 31/31
[ 285.001737] usb-storage: -- transfer complete
[ 285.001741] usb-storage: Bulk command transfer result=0
[ 285.001747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 53248 bytes, 13 entries
[ 285.190786] usb-storage: Status code 0; transferred 53248/53248
[ 285.190791] usb-storage: -- transfer complete
[ 285.190796] usb-storage: Bulk data transfer result 0x0
[ 285.190800] usb-storage: Attempting to get CSW...
[ 285.190805] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.216738] usb-storage: Status code 0; transferred 13/13
[ 285.216742] usb-storage: -- transfer complete
[ 285.216746] usb-storage: Bulk status result = 0
[ 285.216752] usb-storage: Bulk Status S 0x53425355 T 0x7dc R 0 Stat 0x0
[ 285.216757] usb-storage: scsi cmd done, result=0x0
[ 285.216765] usb-storage: *** thread sleeping.
[ 285.216815] usb-storage: queuecommand called
[ 285.216832] usb-storage: *** thread awakened.
[ 285.216838] usb-storage: Command WRITE_10 (10 bytes)
[ 285.216841] usb-storage: 2a 00 00 b4 01 07 00 00 08 00
[ 285.216860] usb-storage: Bulk Command S 0x43425355 T 0x7dd L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.216866] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.217743] usb-storage: Status code 0; transferred 31/31
[ 285.217747] usb-storage: -- transfer complete
[ 285.217751] usb-storage: Bulk command transfer result=0
[ 285.217756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.294771] usb-storage: Status code 0; transferred 4096/4096
[ 285.294775] usb-storage: -- transfer complete
[ 285.294779] usb-storage: Bulk data transfer result 0x0
[ 285.294783] usb-storage: Attempting to get CSW...
[ 285.294788] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.317735] usb-storage: Status code 0; transferred 13/13
[ 285.317739] usb-storage: -- transfer complete
[ 285.317743] usb-storage: Bulk status result = 0
[ 285.317749] usb-storage: Bulk Status S 0x53425355 T 0x7dd R 0 Stat 0x0
[ 285.317754] usb-storage: scsi cmd done, result=0x0
[ 285.317760] usb-storage: *** thread sleeping.
[ 285.317779] usb-storage: queuecommand called
[ 285.317794] usb-storage: *** thread awakened.
[ 285.317799] usb-storage: Command WRITE_10 (10 bytes)
[ 285.317803] usb-storage: 2a 00 00 08 00 5f 00 00 08 00
[ 285.317821] usb-storage: Bulk Command S 0x43425355 T 0x7de L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.317827] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.318745] usb-storage: Status code 0; transferred 31/31
[ 285.318749] usb-storage: -- transfer complete
[ 285.318753] usb-storage: Bulk command transfer result=0
[ 285.318758] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.323740] usb-storage: Status code 0; transferred 4096/4096
[ 285.323744] usb-storage: -- transfer complete
[ 285.323749] usb-storage: Bulk data transfer result 0x0
[ 285.323752] usb-storage: Attempting to get CSW...
[ 285.323757] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.324745] usb-storage: Status code 0; transferred 13/13
[ 285.324751] usb-storage: -- transfer complete
[ 285.324756] usb-storage: Bulk status result = 0
[ 285.324763] usb-storage: Bulk Status S 0x53425355 T 0x7de R 0 Stat 0x0
[ 285.324769] usb-storage: scsi cmd done, result=0x0
[ 285.324777] usb-storage: *** thread sleeping.
[ 285.324798] usb-storage: queuecommand called
[ 285.324813] usb-storage: *** thread awakened.
[ 285.324819] usb-storage: Command WRITE_10 (10 bytes)
[ 285.324824] usb-storage: 2a 00 00 28 00 7f 00 00 08 00
[ 285.324846] usb-storage: Bulk Command S 0x43425355 T 0x7df L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.324853] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.325739] usb-storage: Status code 0; transferred 31/31
[ 285.325744] usb-storage: -- transfer complete
[ 285.325749] usb-storage: Bulk command transfer result=0
[ 285.325756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.529772] usb-storage: Status code 0; transferred 4096/4096
[ 285.529776] usb-storage: -- transfer complete
[ 285.529780] usb-storage: Bulk data transfer result 0x0
[ 285.529784] usb-storage: Attempting to get CSW...
[ 285.529789] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.530723] usb-storage: Status code 0; transferred 13/13
[ 285.530727] usb-storage: -- transfer complete
[ 285.530731] usb-storage: Bulk status result = 0
[ 285.530737] usb-storage: Bulk Status S 0x53425355 T 0x7df R 0 Stat 0x0
[ 285.530742] usb-storage: scsi cmd done, result=0x0
[ 285.530747] usb-storage: *** thread sleeping.
[ 285.530766] usb-storage: queuecommand called
[ 285.530779] usb-storage: *** thread awakened.
[ 285.530784] usb-storage: Command WRITE_10 (10 bytes)
[ 285.530788] usb-storage: 2a 00 00 28 00 a7 00 00 08 00
[ 285.530806] usb-storage: Bulk Command S 0x43425355 T 0x7e0 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.530812] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.531739] usb-storage: Status code 0; transferred 31/31
[ 285.531743] usb-storage: -- transfer complete
[ 285.531747] usb-storage: Bulk command transfer result=0
[ 285.531752] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.536762] usb-storage: Status code 0; transferred 4096/4096
[ 285.536766] usb-storage: -- transfer complete
[ 285.536770] usb-storage: Bulk data transfer result 0x0
[ 285.536774] usb-storage: Attempting to get CSW...
[ 285.536779] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.538727] usb-storage: Status code 0; transferred 13/13
[ 285.538731] usb-storage: -- transfer complete
[ 285.538735] usb-storage: Bulk status result = 0
[ 285.538740] usb-storage: Bulk Status S 0x53425355 T 0x7e0 R 0 Stat 0x0
[ 285.538745] usb-storage: scsi cmd done, result=0x0
[ 285.538751] usb-storage: *** thread sleeping.
[ 285.538768] usb-storage: queuecommand called
[ 285.538781] usb-storage: *** thread awakened.
[ 285.538786] usb-storage: Command WRITE_10 (10 bytes)
[ 285.538790] usb-storage: 2a 00 00 30 00 bf 00 00 08 00
[ 285.538808] usb-storage: Bulk Command S 0x43425355 T 0x7e1 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.538814] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.539743] usb-storage: Status code 0; transferred 31/31
[ 285.539747] usb-storage: -- transfer complete
[ 285.539751] usb-storage: Bulk command transfer result=0
[ 285.539756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.740755] usb-storage: Status code 0; transferred 4096/4096
[ 285.740759] usb-storage: -- transfer complete
[ 285.740764] usb-storage: Bulk data transfer result 0x0
[ 285.740767] usb-storage: Attempting to get CSW...
[ 285.740772] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.741733] usb-storage: Status code 0; transferred 13/13
[ 285.741737] usb-storage: -- transfer complete
[ 285.741741] usb-storage: Bulk status result = 0
[ 285.741746] usb-storage: Bulk Status S 0x53425355 T 0x7e1 R 0 Stat 0x0
[ 285.741751] usb-storage: scsi cmd done, result=0x0
[ 285.741757] usb-storage: *** thread sleeping.
[ 285.741777] usb-storage: queuecommand called
[ 285.741787] usb-storage: *** thread awakened.
[ 285.741791] usb-storage: Command WRITE_10 (10 bytes)
[ 285.741795] usb-storage: 2a 00 00 74 1d 27 00 00 48 00
[ 285.741813] usb-storage: Bulk Command S 0x43425355 T 0x7e2 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 285.741819] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.742724] usb-storage: Status code 0; transferred 31/31
[ 285.742729] usb-storage: -- transfer complete
[ 285.742733] usb-storage: Bulk command transfer result=0
[ 285.742738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 286.018759] usb-storage: Status code 0; transferred 36864/36864
[ 286.018764] usb-storage: -- transfer complete
[ 286.018768] usb-storage: Bulk data transfer result 0x0
[ 286.018772] usb-storage: Attempting to get CSW...
[ 286.018777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 286.020727] usb-storage: Status code 0; transferred 13/13
[ 286.020731] usb-storage: -- transfer complete
[ 286.020735] usb-storage: Bulk status result = 0
[ 286.020741] usb-storage: Bulk Status S 0x53425355 T 0x7e2 R 0 Stat 0x0
[ 286.020746] usb-storage: scsi cmd done, result=0x0
[ 286.020752] usb-storage: *** thread sleeping.
[ 286.020837] usb-storage: queuecommand called
[ 286.020849] usb-storage: *** thread awakened.
[ 286.020854] usb-storage: Command WRITE_10 (10 bytes)
[ 286.020858] usb-storage: 2a 00 00 74 1d 6f 00 00 08 00
[ 286.020876] usb-storage: Bulk Command S 0x43425355 T 0x7e3 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 286.020882] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 286.021741] usb-storage: Status code 0; transferred 31/31
[ 286.021745] usb-storage: -- transfer complete
[ 286.021749] usb-storage: Bulk command transfer result=0
[ 286.021755] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 286.028764] usb-storage: Status code 0; transferred 4096/4096
[ 286.028768] usb-storage: -- transfer complete
[ 286.028772] usb-storage: Bulk data transfer result 0x0
[ 286.028776] usb-storage: Attempting to get CSW...
[ 286.028781] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 286.029742] usb-storage: Status code 0; transferred 13/13
[ 286.029746] usb-storage: -- transfer complete
[ 286.029750] usb-storage: Bulk status result = 0
[ 286.029755] usb-storage: Bulk Status S 0x53425355 T 0x7e3 R 0 Stat 0x0
[ 286.029760] usb-storage: scsi cmd done, result=0x0
[ 286.029768] usb-storage: *** thread sleeping.
[ 290.012644] usb-storage: queuecommand called
[ 290.012677] usb-storage: *** thread awakened.
[ 290.012684] usb-storage: Command WRITE_10 (10 bytes)
[ 290.012688] usb-storage: 2a 00 00 74 1d 77 00 00 48 00
[ 290.012706] usb-storage: Bulk Command S 0x43425355 T 0x7e4 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 290.012712] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 290.014748] usb-storage: Status code 0; transferred 31/31
[ 290.014753] usb-storage: -- transfer complete
[ 290.014757] usb-storage: Bulk command transfer result=0
[ 290.014763] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 290.112768] usb-storage: Status code 0; transferred 36864/36864
[ 290.112774] usb-storage: -- transfer complete
[ 290.112778] usb-storage: Bulk data transfer result 0x0
[ 290.112783] usb-storage: Attempting to get CSW...
[ 290.112788] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 290.117736] usb-storage: Status code 0; transferred 13/13
[ 290.117741] usb-storage: -- transfer complete
[ 290.117745] usb-storage: Bulk status result = 0
[ 290.117750] usb-storage: Bulk Status S 0x53425355 T 0x7e4 R 0 Stat 0x0
[ 290.117755] usb-storage: scsi cmd done, result=0x0
[ 290.117763] usb-storage: *** thread sleeping.
[ 290.117858] usb-storage: queuecommand called
[ 290.117887] usb-storage: *** thread awakened.
[ 290.117893] usb-storage: Command WRITE_10 (10 bytes)
[ 290.117897] usb-storage: 2a 00 00 74 1d bf 00 00 08 00
[ 290.117915] usb-storage: Bulk Command S 0x43425355 T 0x7e5 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 290.117921] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 290.118754] usb-storage: Status code 0; transferred 31/31
[ 290.118758] usb-storage: -- transfer complete
[ 290.118762] usb-storage: Bulk command transfer result=0
[ 290.118768] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 290.124758] usb-storage: Status code 0; transferred 4096/4096
[ 290.124764] usb-storage: -- transfer complete
[ 290.124769] usb-storage: Bulk data transfer result 0x0
[ 290.124772] usb-storage: Attempting to get CSW...
[ 290.124778] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 290.125745] usb-storage: Status code 0; transferred 13/13
[ 290.125750] usb-storage: -- transfer complete
[ 290.125754] usb-storage: Bulk status result = 0
[ 290.125760] usb-storage: Bulk Status S 0x53425355 T 0x7e5 R 0 Stat 0x0
[ 290.125766] usb-storage: scsi cmd done, result=0x0
[ 290.125773] usb-storage: *** thread sleeping.
[ 295.010045] usb-storage: queuecommand called
[ 295.010078] usb-storage: *** thread awakened.
[ 295.010087] usb-storage: Command WRITE_10 (10 bytes)
[ 295.010091] usb-storage: 2a 00 00 b8 ba a7 00 00 60 00
[ 295.010111] usb-storage: Bulk Command S 0x43425355 T 0x7e6 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 295.010118] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 295.011735] usb-storage: Status code 0; transferred 31/31
[ 295.011740] usb-storage: -- transfer complete
[ 295.011744] usb-storage: Bulk command transfer result=0
[ 295.011750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 295.187765] usb-storage: Status code 0; transferred 49152/49152
[ 295.187770] usb-storage: -- transfer complete
[ 295.187775] usb-storage: Bulk data transfer result 0x0
[ 295.187779] usb-storage: Attempting to get CSW...
[ 295.187784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 295.212739] usb-storage: Status code 0; transferred 13/13
[ 295.212744] usb-storage: -- transfer complete
[ 295.212748] usb-storage: Bulk status result = 0
[ 295.212754] usb-storage: Bulk Status S 0x53425355 T 0x7e6 R 0 Stat 0x0
[ 295.212759] usb-storage: scsi cmd done, result=0x0
[ 295.212767] usb-storage: *** thread sleeping.
[ 295.212817] usb-storage: queuecommand called
[ 295.212833] usb-storage: *** thread awakened.
[ 295.212838] usb-storage: Command WRITE_10 (10 bytes)
[ 295.212842] usb-storage: 2a 00 00 b8 e8 0f 00 00 60 00
[ 295.212861] usb-storage: Bulk Command S 0x43425355 T 0x7e7 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 295.212867] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 295.213737] usb-storage: Status code 0; transferred 31/31
[ 295.213742] usb-storage: -- transfer complete
[ 295.213746] usb-storage: Bulk command transfer result=0
[ 295.213752] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 295.316764] usb-storage: Status code 0; transferred 49152/49152
[ 295.316769] usb-storage: -- transfer complete
[ 295.316774] usb-storage: Bulk data transfer result 0x0
[ 295.316777] usb-storage: Attempting to get CSW...
[ 295.316782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 295.317735] usb-storage: Status code 0; transferred 13/13
[ 295.317739] usb-storage: -- transfer complete
[ 295.317743] usb-storage: Bulk status result = 0
[ 295.317749] usb-storage: Bulk Status S 0x53425355 T 0x7e7 R 0 Stat 0x0
[ 295.317754] usb-storage: scsi cmd done, result=0x0
[ 295.317761] usb-storage: *** thread sleeping.
[ 295.317803] usb-storage: queuecommand called
[ 295.317813] usb-storage: *** thread awakened.
[ 295.317818] usb-storage: Command WRITE_10 (10 bytes)
[ 295.317822] usb-storage: 2a 00 00 74 1d c7 00 00 48 00
[ 295.317841] usb-storage: Bulk Command S 0x43425355 T 0x7e8 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 295.317847] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 295.318730] usb-storage: Status code 0; transferred 31/31
[ 295.318734] usb-storage: -- transfer complete
[ 295.318738] usb-storage: Bulk command transfer result=0
[ 295.318744] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 295.632766] usb-storage: Status code 0; transferred 36864/36864
[ 295.632770] usb-storage: -- transfer complete
[ 295.632775] usb-storage: Bulk data transfer result 0x0
[ 295.632779] usb-storage: Attempting to get CSW...
[ 295.632783] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 295.657749] usb-storage: Status code 0; transferred 13/13
[ 295.657753] usb-storage: -- transfer complete
[ 295.657757] usb-storage: Bulk status result = 0
[ 295.657763] usb-storage: Bulk Status S 0x53425355 T 0x7e8 R 0 Stat 0x0
[ 295.657768] usb-storage: scsi cmd done, result=0x0
[ 295.657774] usb-storage: *** thread sleeping.
[ 295.657854] usb-storage: queuecommand called
[ 295.657866] usb-storage: *** thread awakened.
[ 295.657871] usb-storage: Command WRITE_10 (10 bytes)
[ 295.657875] usb-storage: 2a 00 00 74 1e 0f 00 00 08 00
[ 295.657893] usb-storage: Bulk Command S 0x43425355 T 0x7e9 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 295.657899] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 295.658744] usb-storage: Status code 0; transferred 31/31
[ 295.658748] usb-storage: -- transfer complete
[ 295.658752] usb-storage: Bulk command transfer result=0
[ 295.658758] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 295.664762] usb-storage: Status code 0; transferred 4096/4096
[ 295.664767] usb-storage: -- transfer complete
[ 295.664771] usb-storage: Bulk data transfer result 0x0
[ 295.664775] usb-storage: Attempting to get CSW...
[ 295.664780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 295.666740] usb-storage: Status code 0; transferred 13/13
[ 295.666745] usb-storage: -- transfer complete
[ 295.666749] usb-storage: Bulk status result = 0
[ 295.666755] usb-storage: Bulk Status S 0x53425355 T 0x7e9 R 0 Stat 0x0
[ 295.666761] usb-storage: scsi cmd done, result=0x0
[ 295.666768] usb-storage: *** thread sleeping.
[ 300.040149] usb-storage: queuecommand called
[ 300.040163] usb-storage: *** thread awakened.
[ 300.040169] usb-storage: Command WRITE_10 (10 bytes)
[ 300.040173] usb-storage: 2a 00 00 74 1e 17 00 00 48 00
[ 300.040192] usb-storage: Bulk Command S 0x43425355 T 0x7ea L 36864 F 0 Trg 0 LUN 0 CL 10
[ 300.040199] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 300.041733] usb-storage: Status code 0; transferred 31/31
[ 300.041737] usb-storage: -- transfer complete
[ 300.041741] usb-storage: Bulk command transfer result=0
[ 300.041747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 300.166766] usb-storage: Status code 0; transferred 36864/36864
[ 300.166771] usb-storage: -- transfer complete
[ 300.166776] usb-storage: Bulk data transfer result 0x0
[ 300.166780] usb-storage: Attempting to get CSW...
[ 300.166785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 300.170737] usb-storage: Status code 0; transferred 13/13
[ 300.170742] usb-storage: -- transfer complete
[ 300.170747] usb-storage: Bulk status result = 0
[ 300.170753] usb-storage: Bulk Status S 0x53425355 T 0x7ea R 0 Stat 0x0
[ 300.170758] usb-storage: scsi cmd done, result=0x0
[ 300.170766] usb-storage: *** thread sleeping.
[ 300.170862] usb-storage: queuecommand called
[ 300.170891] usb-storage: *** thread awakened.
[ 300.170898] usb-storage: Command WRITE_10 (10 bytes)
[ 300.170901] usb-storage: 2a 00 00 74 1e 5f 00 00 08 00
[ 300.170920] usb-storage: Bulk Command S 0x43425355 T 0x7eb L 4096 F 0 Trg 0 LUN 0 CL 10
[ 300.170926] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 300.171734] usb-storage: Status code 0; transferred 31/31
[ 300.171738] usb-storage: -- transfer complete
[ 300.171742] usb-storage: Bulk command transfer result=0
[ 300.171747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 300.177766] usb-storage: Status code 0; transferred 4096/4096
[ 300.177770] usb-storage: -- transfer complete
[ 300.177775] usb-storage: Bulk data transfer result 0x0
[ 300.177778] usb-storage: Attempting to get CSW...
[ 300.177783] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 300.178730] usb-storage: Status code 0; transferred 13/13
[ 300.178734] usb-storage: -- transfer complete
[ 300.178738] usb-storage: Bulk status result = 0
[ 300.178743] usb-storage: Bulk Status S 0x53425355 T 0x7eb R 0 Stat 0x0
[ 300.178748] usb-storage: scsi cmd done, result=0x0
[ 300.178755] usb-storage: *** thread sleeping.
[ 313.734641] usb-storage: queuecommand called
[ 313.734664] usb-storage: *** thread awakened.
[ 313.734670] usb-storage: Command READ_10 (10 bytes)
[ 313.734674] usb-storage: 28 00 00 c8 00 4f 00 00 08 00
[ 313.734695] usb-storage: Bulk Command S 0x43425355 T 0x7ec L 4096 F 128 Trg 0 LUN 0 CL 10
[ 313.734702] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 313.736741] usb-storage: Status code 0; transferred 31/31
[ 313.736747] usb-storage: -- transfer complete
[ 313.736752] usb-storage: Bulk command transfer result=0
[ 313.736758] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 313.749773] usb-storage: Status code 0; transferred 4096/4096
[ 313.749778] usb-storage: -- transfer complete
[ 313.749782] usb-storage: Bulk data transfer result 0x0
[ 313.749786] usb-storage: Attempting to get CSW...
[ 313.749791] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 313.750732] usb-storage: Status code 0; transferred 13/13
[ 313.750737] usb-storage: -- transfer complete
[ 313.750742] usb-storage: Bulk status result = 0
[ 313.750747] usb-storage: Bulk Status S 0x53425355 T 0x7ec R 0 Stat 0x0
[ 313.750753] usb-storage: scsi cmd done, result=0x0
[ 313.750760] usb-storage: *** thread sleeping.
[ 313.750791] usb-storage: queuecommand called
[ 313.750801] usb-storage: *** thread awakened.
[ 313.750807] usb-storage: Command WRITE_10 (10 bytes)
[ 313.750810] usb-storage: 2a 00 00 74 1e 67 00 00 50 00
[ 313.750829] usb-storage: Bulk Command S 0x43425355 T 0x7ed L 40960 F 0 Trg 0 LUN 0 CL 10
[ 313.750835] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 313.751755] usb-storage: Status code 0; transferred 31/31
[ 313.751761] usb-storage: -- transfer complete
[ 313.751766] usb-storage: Bulk command transfer result=0
[ 313.751772] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 313.908765] usb-storage: Status code 0; transferred 40960/40960
[ 313.908771] usb-storage: -- transfer complete
[ 313.908775] usb-storage: Bulk data transfer result 0x0
[ 313.908779] usb-storage: Attempting to get CSW...
[ 313.908784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 313.913737] usb-storage: Status code 0; transferred 13/13
[ 313.913741] usb-storage: -- transfer complete
[ 313.913745] usb-storage: Bulk status result = 0
[ 313.913750] usb-storage: Bulk Status S 0x53425355 T 0x7ed R 0 Stat 0x0
[ 313.913756] usb-storage: scsi cmd done, result=0x0
[ 313.913764] usb-storage: *** thread sleeping.
[ 313.913868] usb-storage: queuecommand called
[ 313.913880] usb-storage: *** thread awakened.
[ 313.913885] usb-storage: Command WRITE_10 (10 bytes)
[ 313.913889] usb-storage: 2a 00 00 74 1e b7 00 00 08 00
[ 313.913908] usb-storage: Bulk Command S 0x43425355 T 0x7ee L 4096 F 0 Trg 0 LUN 0 CL 10
[ 313.913914] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 313.914742] usb-storage: Status code 0; transferred 31/31
[ 313.914746] usb-storage: -- transfer complete
[ 313.914751] usb-storage: Bulk command transfer result=0
[ 313.914757] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 313.920747] usb-storage: Status code 0; transferred 4096/4096
[ 313.920752] usb-storage: -- transfer complete
[ 313.920756] usb-storage: Bulk data transfer result 0x0
[ 313.920760] usb-storage: Attempting to get CSW...
[ 313.920765] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 313.921743] usb-storage: Status code 0; transferred 13/13
[ 313.921747] usb-storage: -- transfer complete
[ 313.921751] usb-storage: Bulk status result = 0
[ 313.921756] usb-storage: Bulk Status S 0x53425355 T 0x7ee R 0 Stat 0x0
[ 313.921761] usb-storage: scsi cmd done, result=0x0
[ 313.921769] usb-storage: *** thread sleeping.
[ 315.010040] usb-storage: queuecommand called
[ 315.010052] usb-storage: *** thread awakened.
[ 315.010057] usb-storage: Command WRITE_10 (10 bytes)
[ 315.010061] usb-storage: 2a 00 00 b8 ef 37 00 00 50 00
[ 315.010081] usb-storage: Bulk Command S 0x43425355 T 0x7ef L 40960 F 0 Trg 0 LUN 0 CL 10
[ 315.010087] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 315.011733] usb-storage: Status code 0; transferred 31/31
[ 315.011737] usb-storage: -- transfer complete
[ 315.011741] usb-storage: Bulk command transfer result=0
[ 315.011747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 315.205765] usb-storage: Status code 0; transferred 40960/40960
[ 315.205771] usb-storage: -- transfer complete
[ 315.205775] usb-storage: Bulk data transfer result 0x0
[ 315.205779] usb-storage: Attempting to get CSW...
[ 315.205785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 315.231743] usb-storage: Status code 0; transferred 13/13
[ 315.231747] usb-storage: -- transfer complete
[ 315.231752] usb-storage: Bulk status result = 0
[ 315.231757] usb-storage: Bulk Status S 0x53425355 T 0x7ef R 0 Stat 0x0
[ 315.231763] usb-storage: scsi cmd done, result=0x0
[ 315.231770] usb-storage: *** thread sleeping.
[ 319.012624] usb-storage: queuecommand called
[ 319.012636] usb-storage: *** thread awakened.
[ 319.012642] usb-storage: Command WRITE_10 (10 bytes)
[ 319.012646] usb-storage: 2a 00 00 74 1e bf 00 00 48 00
[ 319.012665] usb-storage: Bulk Command S 0x43425355 T 0x7f0 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 319.012671] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 319.013735] usb-storage: Status code 0; transferred 31/31
[ 319.013739] usb-storage: -- transfer complete
[ 319.013743] usb-storage: Bulk command transfer result=0
[ 319.013749] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 319.175767] usb-storage: Status code 0; transferred 36864/36864
[ 319.175772] usb-storage: -- transfer complete
[ 319.175777] usb-storage: Bulk data transfer result 0x0
[ 319.175781] usb-storage: Attempting to get CSW...
[ 319.175786] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 319.199741] usb-storage: Status code 0; transferred 13/13
[ 319.199745] usb-storage: -- transfer complete
[ 319.199749] usb-storage: Bulk status result = 0
[ 319.199755] usb-storage: Bulk Status S 0x53425355 T 0x7f0 R 0 Stat 0x0
[ 319.199760] usb-storage: scsi cmd done, result=0x0
[ 319.199767] usb-storage: *** thread sleeping.
[ 319.199847] usb-storage: queuecommand called
[ 319.199858] usb-storage: *** thread awakened.
[ 319.199864] usb-storage: Command WRITE_10 (10 bytes)
[ 319.199867] usb-storage: 2a 00 00 74 1f 07 00 00 08 00
[ 319.199886] usb-storage: Bulk Command S 0x43425355 T 0x7f1 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 319.199892] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 319.200747] usb-storage: Status code 0; transferred 31/31
[ 319.200752] usb-storage: -- transfer complete
[ 319.200757] usb-storage: Bulk command transfer result=0
[ 319.200763] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 319.207767] usb-storage: Status code 0; transferred 4096/4096
[ 319.207772] usb-storage: -- transfer complete
[ 319.207777] usb-storage: Bulk data transfer result 0x0
[ 319.207780] usb-storage: Attempting to get CSW...
[ 319.207786] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 319.209745] usb-storage: Status code 0; transferred 13/13
[ 319.209749] usb-storage: -- transfer complete
[ 319.209753] usb-storage: Bulk status result = 0
[ 319.209759] usb-storage: Bulk Status S 0x53425355 T 0x7f1 R 0 Stat 0x0
[ 319.209764] usb-storage: scsi cmd done, result=0x0
[ 319.209771] usb-storage: *** thread sleeping.
[ 325.010044] usb-storage: queuecommand called
[ 325.010058] usb-storage: *** thread awakened.
[ 325.010064] usb-storage: Command WRITE_10 (10 bytes)
[ 325.010068] usb-storage: 2a 00 00 c4 0f 67 00 00 08 00
[ 325.010088] usb-storage: Bulk Command S 0x43425355 T 0x7f2 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 325.010095] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 325.011739] usb-storage: Status code 0; transferred 31/31
[ 325.011744] usb-storage: -- transfer complete
[ 325.011748] usb-storage: Bulk command transfer result=0
[ 325.011754] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 325.025767] usb-storage: Status code 0; transferred 4096/4096
[ 325.025772] usb-storage: -- transfer complete
[ 325.025776] usb-storage: Bulk data transfer result 0x0
[ 325.025780] usb-storage: Attempting to get CSW...
[ 325.025785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 325.050743] usb-storage: Status code 0; transferred 13/13
[ 325.050749] usb-storage: -- transfer complete
[ 325.050753] usb-storage: Bulk status result = 0
[ 325.050759] usb-storage: Bulk Status S 0x53425355 T 0x7f2 R 0 Stat 0x0
[ 325.050765] usb-storage: scsi cmd done, result=0x0
[ 325.050772] usb-storage: *** thread sleeping.
[ 325.050802] usb-storage: queuecommand called
[ 325.050812] usb-storage: *** thread awakened.
[ 325.050818] usb-storage: Command WRITE_10 (10 bytes)
[ 325.050822] usb-storage: 2a 00 00 74 1f 0f 00 00 48 00
[ 325.050841] usb-storage: Bulk Command S 0x43425355 T 0x7f3 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 325.050847] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 325.051750] usb-storage: Status code 0; transferred 31/31
[ 325.051755] usb-storage: -- transfer complete
[ 325.051759] usb-storage: Bulk command transfer result=0
[ 325.051764] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 325.415770] usb-storage: Status code 0; transferred 36864/36864
[ 325.415774] usb-storage: -- transfer complete
[ 325.415779] usb-storage: Bulk data transfer result 0x0
[ 325.415783] usb-storage: Attempting to get CSW...
[ 325.415788] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 325.417748] usb-storage: Status code 0; transferred 13/13
[ 325.417752] usb-storage: -- transfer complete
[ 325.417756] usb-storage: Bulk status result = 0
[ 325.417761] usb-storage: Bulk Status S 0x53425355 T 0x7f3 R 0 Stat 0x0
[ 325.417766] usb-storage: scsi cmd done, result=0x0
[ 325.417773] usb-storage: *** thread sleeping.
[ 325.417854] usb-storage: queuecommand called
[ 325.417865] usb-storage: *** thread awakened.
[ 325.417871] usb-storage: Command WRITE_10 (10 bytes)
[ 325.417874] usb-storage: 2a 00 00 74 1f 57 00 00 08 00
[ 325.417893] usb-storage: Bulk Command S 0x43425355 T 0x7f4 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 325.417899] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 325.418827] usb-storage: Status code 0; transferred 31/31
[ 325.418832] usb-storage: -- transfer complete
[ 325.418836] usb-storage: Bulk command transfer result=0
[ 325.418842] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 325.424763] usb-storage: Status code 0; transferred 4096/4096
[ 325.424768] usb-storage: -- transfer complete
[ 325.424773] usb-storage: Bulk data transfer result 0x0
[ 325.424777] usb-storage: Attempting to get CSW...
[ 325.424782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 325.425728] usb-storage: Status code 0; transferred 13/13
[ 325.425732] usb-storage: -- transfer complete
[ 325.425736] usb-storage: Bulk status result = 0
[ 325.425742] usb-storage: Bulk Status S 0x53425355 T 0x7f4 R 0 Stat 0x0
[ 325.425747] usb-storage: scsi cmd done, result=0x0
[ 325.425753] usb-storage: *** thread sleeping.
[ 330.012557] usb-storage: queuecommand called
[ 330.012591] usb-storage: *** thread awakened.
[ 330.012599] usb-storage: Command WRITE_10 (10 bytes)
[ 330.012603] usb-storage: 2a 00 00 b8 ba ff 00 00 40 00
[ 330.012623] usb-storage: Bulk Command S 0x43425355 T 0x7f5 L 32768 F 0 Trg 0 LUN 0 CL 10
[ 330.012629] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 330.013736] usb-storage: Status code 0; transferred 31/31
[ 330.013740] usb-storage: -- transfer complete
[ 330.013744] usb-storage: Bulk command transfer result=0
[ 330.013750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 330.189764] usb-storage: Status code 0; transferred 32768/32768
[ 330.189769] usb-storage: -- transfer complete
[ 330.189774] usb-storage: Bulk data transfer result 0x0
[ 330.189779] usb-storage: Attempting to get CSW...
[ 330.189784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 330.214743] usb-storage: Status code 0; transferred 13/13
[ 330.214747] usb-storage: -- transfer complete
[ 330.214751] usb-storage: Bulk status result = 0
[ 330.214757] usb-storage: Bulk Status S 0x53425355 T 0x7f5 R 0 Stat 0x0
[ 330.214763] usb-storage: scsi cmd done, result=0x0
[ 330.214770] usb-storage: *** thread sleeping.
[ 330.214812] usb-storage: queuecommand called
[ 330.214829] usb-storage: *** thread awakened.
[ 330.214835] usb-storage: Command WRITE_10 (10 bytes)
[ 330.214838] usb-storage: 2a 00 00 b8 e8 67 00 00 40 00
[ 330.214857] usb-storage: Bulk Command S 0x43425355 T 0x7f6 L 32768 F 0 Trg 0 LUN 0 CL 10
[ 330.214864] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 330.215754] usb-storage: Status code 0; transferred 31/31
[ 330.215759] usb-storage: -- transfer complete
[ 330.215763] usb-storage: Bulk command transfer result=0
[ 330.215769] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 330.308766] usb-storage: Status code 0; transferred 32768/32768
[ 330.308771] usb-storage: -- transfer complete
[ 330.308775] usb-storage: Bulk data transfer result 0x0
[ 330.308778] usb-storage: Attempting to get CSW...
[ 330.308783] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 330.310732] usb-storage: Status code 0; transferred 13/13
[ 330.310737] usb-storage: -- transfer complete
[ 330.310741] usb-storage: Bulk status result = 0
[ 330.310746] usb-storage: Bulk Status S 0x53425355 T 0x7f6 R 0 Stat 0x0
[ 330.310751] usb-storage: scsi cmd done, result=0x0
[ 330.310758] usb-storage: *** thread sleeping.
[ 330.310793] usb-storage: queuecommand called
[ 330.310803] usb-storage: *** thread awakened.
[ 330.310808] usb-storage: Command WRITE_10 (10 bytes)
[ 330.310812] usb-storage: 2a 00 00 74 1f 5f 00 00 48 00
[ 330.310830] usb-storage: Bulk Command S 0x43425355 T 0x7f7 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 330.310836] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 330.311756] usb-storage: Status code 0; transferred 31/31
[ 330.311760] usb-storage: -- transfer complete
[ 330.311764] usb-storage: Bulk command transfer result=0
[ 330.311770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 330.682767] usb-storage: Status code 0; transferred 36864/36864
[ 330.682772] usb-storage: -- transfer complete
[ 330.682776] usb-storage: Bulk data transfer result 0x0
[ 330.682780] usb-storage: Attempting to get CSW...
[ 330.682785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 330.708741] usb-storage: Status code 0; transferred 13/13
[ 330.708746] usb-storage: -- transfer complete
[ 330.708750] usb-storage: Bulk status result = 0
[ 330.708755] usb-storage: Bulk Status S 0x53425355 T 0x7f7 R 0 Stat 0x0
[ 330.708760] usb-storage: scsi cmd done, result=0x0
[ 330.708766] usb-storage: *** thread sleeping.
[ 330.708843] usb-storage: queuecommand called
[ 330.708854] usb-storage: *** thread awakened.
[ 330.708859] usb-storage: Command WRITE_10 (10 bytes)
[ 330.708863] usb-storage: 2a 00 00 74 1f a7 00 00 08 00
[ 330.708881] usb-storage: Bulk Command S 0x43425355 T 0x7f8 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 330.708887] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 330.709751] usb-storage: Status code 0; transferred 31/31
[ 330.709755] usb-storage: -- transfer complete
[ 330.709759] usb-storage: Bulk command transfer result=0
[ 330.709765] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 330.716765] usb-storage: Status code 0; transferred 4096/4096
[ 330.716770] usb-storage: -- transfer complete
[ 330.716774] usb-storage: Bulk data transfer result 0x0
[ 330.716778] usb-storage: Attempting to get CSW...
[ 330.716783] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 330.718741] usb-storage: Status code 0; transferred 13/13
[ 330.718745] usb-storage: -- transfer complete
[ 330.718749] usb-storage: Bulk status result = 0
[ 330.718754] usb-storage: Bulk Status S 0x53425355 T 0x7f8 R 0 Stat 0x0
[ 330.718760] usb-storage: scsi cmd done, result=0x0
[ 330.718766] usb-storage: *** thread sleeping.
[ 335.040132] usb-storage: queuecommand called
[ 335.040144] usb-storage: *** thread awakened.
[ 335.040149] usb-storage: Command WRITE_10 (10 bytes)
[ 335.040153] usb-storage: 2a 00 00 74 1f af 00 00 48 00
[ 335.040172] usb-storage: Bulk Command S 0x43425355 T 0x7f9 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 335.040178] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 335.041736] usb-storage: Status code 0; transferred 31/31
[ 335.041740] usb-storage: -- transfer complete
[ 335.041744] usb-storage: Bulk command transfer result=0
[ 335.041750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 335.238767] usb-storage: Status code 0; transferred 36864/36864
[ 335.238773] usb-storage: -- transfer complete
[ 335.238778] usb-storage: Bulk data transfer result 0x0
[ 335.238782] usb-storage: Attempting to get CSW...
[ 335.238787] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 335.243740] usb-storage: Status code 0; transferred 13/13
[ 335.243745] usb-storage: -- transfer complete
[ 335.243749] usb-storage: Bulk status result = 0
[ 335.243755] usb-storage: Bulk Status S 0x53425355 T 0x7f9 R 0 Stat 0x0
[ 335.243760] usb-storage: scsi cmd done, result=0x0
[ 335.243767] usb-storage: *** thread sleeping.
[ 335.243863] usb-storage: queuecommand called
[ 335.243884] usb-storage: *** thread awakened.
[ 335.243890] usb-storage: Command WRITE_10 (10 bytes)
[ 335.243894] usb-storage: 2a 00 00 74 1f f7 00 00 08 00
[ 335.243913] usb-storage: Bulk Command S 0x43425355 T 0x7fa L 4096 F 0 Trg 0 LUN 0 CL 10
[ 335.243919] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 335.244755] usb-storage: Status code 0; transferred 31/31
[ 335.244759] usb-storage: -- transfer complete
[ 335.244764] usb-storage: Bulk command transfer result=0
[ 335.244770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 335.251766] usb-storage: Status code 0; transferred 4096/4096
[ 335.251771] usb-storage: -- transfer complete
[ 335.251775] usb-storage: Bulk data transfer result 0x0
[ 335.251779] usb-storage: Attempting to get CSW...
[ 335.251784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 335.253729] usb-storage: Status code 0; transferred 13/13
[ 335.253734] usb-storage: -- transfer complete
[ 335.253738] usb-storage: Bulk status result = 0
[ 335.253743] usb-storage: Bulk Status S 0x53425355 T 0x7fa R 0 Stat 0x0
[ 335.253748] usb-storage: scsi cmd done, result=0x0
[ 335.253755] usb-storage: *** thread sleeping.
[ 340.040140] usb-storage: queuecommand called
[ 340.040177] usb-storage: *** thread awakened.
[ 340.040185] usb-storage: Command WRITE_10 (10 bytes)
[ 340.040189] usb-storage: 2a 00 00 74 1f ff 00 00 48 00
[ 340.040209] usb-storage: Bulk Command S 0x43425355 T 0x7fb L 36864 F 0 Trg 0 LUN 0 CL 10
[ 340.040215] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 340.041737] usb-storage: Status code 0; transferred 31/31
[ 340.041741] usb-storage: -- transfer complete
[ 340.041745] usb-storage: Bulk command transfer result=0
[ 340.041751] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 340.258788] usb-storage: Status code 0; transferred 36864/36864
[ 340.258793] usb-storage: -- transfer complete
[ 340.258797] usb-storage: Bulk data transfer result 0x0
[ 340.258801] usb-storage: Attempting to get CSW...
[ 340.258806] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 340.262741] usb-storage: Status code 0; transferred 13/13
[ 340.262746] usb-storage: -- transfer complete
[ 340.262751] usb-storage: Bulk status result = 0
[ 340.262756] usb-storage: Bulk Status S 0x53425355 T 0x7fb R 0 Stat 0x0
[ 340.262761] usb-storage: scsi cmd done, result=0x0
[ 340.262768] usb-storage: *** thread sleeping.
[ 340.262869] usb-storage: queuecommand called
[ 340.262897] usb-storage: *** thread awakened.
[ 340.262903] usb-storage: Command WRITE_10 (10 bytes)
[ 340.262907] usb-storage: 2a 00 00 74 20 47 00 00 08 00
[ 340.262925] usb-storage: Bulk Command S 0x43425355 T 0x7fc L 4096 F 0 Trg 0 LUN 0 CL 10
[ 340.262931] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 340.263754] usb-storage: Status code 0; transferred 31/31
[ 340.263758] usb-storage: -- transfer complete
[ 340.263763] usb-storage: Bulk command transfer result=0
[ 340.263769] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 340.270770] usb-storage: Status code 0; transferred 4096/4096
[ 340.270775] usb-storage: -- transfer complete
[ 340.270779] usb-storage: Bulk data transfer result 0x0
[ 340.270783] usb-storage: Attempting to get CSW...
[ 340.270788] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 340.272747] usb-storage: Status code 0; transferred 13/13
[ 340.272752] usb-storage: -- transfer complete
[ 340.272757] usb-storage: Bulk status result = 0
[ 340.272762] usb-storage: Bulk Status S 0x53425355 T 0x7fc R 0 Stat 0x0
[ 340.272768] usb-storage: scsi cmd done, result=0x0
[ 340.272775] usb-storage: *** thread sleeping.
[ 345.040197] usb-storage: queuecommand called
[ 345.040213] usb-storage: *** thread awakened.
[ 345.040219] usb-storage: Command WRITE_10 (10 bytes)
[ 345.040223] usb-storage: 2a 00 00 74 20 4f 00 00 48 00
[ 345.040244] usb-storage: Bulk Command S 0x43425355 T 0x7fd L 36864 F 0 Trg 0 LUN 0 CL 10
[ 345.040250] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 345.041744] usb-storage: Status code 0; transferred 31/31
[ 345.041749] usb-storage: -- transfer complete
[ 345.041754] usb-storage: Bulk command transfer result=0
[ 345.041761] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 345.089787] usb-storage: Status code 0; transferred 36864/36864
[ 345.089792] usb-storage: -- transfer complete
[ 345.089796] usb-storage: Bulk data transfer result 0x0
[ 345.089800] usb-storage: Attempting to get CSW...
[ 345.089805] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 345.093756] usb-storage: Status code 0; transferred 13/13
[ 345.093760] usb-storage: -- transfer complete
[ 345.093765] usb-storage: Bulk status result = 0
[ 345.093770] usb-storage: Bulk Status S 0x53425355 T 0x7fd R 0 Stat 0x0
[ 345.093776] usb-storage: scsi cmd done, result=0x0
[ 345.093784] usb-storage: *** thread sleeping.
[ 345.093867] usb-storage: queuecommand called
[ 345.093878] usb-storage: *** thread awakened.
[ 345.093883] usb-storage: Command WRITE_10 (10 bytes)
[ 345.093887] usb-storage: 2a 00 00 74 20 97 00 00 08 00
[ 345.093906] usb-storage: Bulk Command S 0x43425355 T 0x7fe L 4096 F 0 Trg 0 LUN 0 CL 10
[ 345.093912] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 345.094753] usb-storage: Status code 0; transferred 31/31
[ 345.094758] usb-storage: -- transfer complete
[ 345.094762] usb-storage: Bulk command transfer result=0
[ 345.094768] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 345.100760] usb-storage: Status code 0; transferred 4096/4096
[ 345.100764] usb-storage: -- transfer complete
[ 345.100768] usb-storage: Bulk data transfer result 0x0
[ 345.100772] usb-storage: Attempting to get CSW...
[ 345.100777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 345.101737] usb-storage: Status code 0; transferred 13/13
[ 345.101741] usb-storage: -- transfer complete
[ 345.101745] usb-storage: Bulk status result = 0
[ 345.101751] usb-storage: Bulk Status S 0x53425355 T 0x7fe R 0 Stat 0x0
[ 345.101756] usb-storage: scsi cmd done, result=0x0
[ 345.101763] usb-storage: *** thread sleeping.
[ 350.020042] usb-storage: queuecommand called
[ 350.020074] usb-storage: *** thread awakened.
[ 350.020081] usb-storage: Command WRITE_10 (10 bytes)
[ 350.020085] usb-storage: 2a 00 00 b8 ef 7f 00 00 40 00
[ 350.020105] usb-storage: Bulk Command S 0x43425355 T 0x7ff L 32768 F 0 Trg 0 LUN 0 CL 10
[ 350.020111] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 350.021754] usb-storage: Status code 0; transferred 31/31
[ 350.021759] usb-storage: -- transfer complete
[ 350.021763] usb-storage: Bulk command transfer result=0
[ 350.021768] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 350.219770] usb-storage: Status code 0; transferred 32768/32768
[ 350.219776] usb-storage: -- transfer complete
[ 350.219780] usb-storage: Bulk data transfer result 0x0
[ 350.219784] usb-storage: Attempting to get CSW...
[ 350.219789] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 350.244749] usb-storage: Status code 0; transferred 13/13
[ 350.244754] usb-storage: -- transfer complete
[ 350.244758] usb-storage: Bulk status result = 0
[ 350.244764] usb-storage: Bulk Status S 0x53425355 T 0x7ff R 0 Stat 0x0
[ 350.244769] usb-storage: scsi cmd done, result=0x0
[ 350.244777] usb-storage: *** thread sleeping.
[ 350.244814] usb-storage: queuecommand called
[ 350.244825] usb-storage: *** thread awakened.
[ 350.244830] usb-storage: Command WRITE_10 (10 bytes)
[ 350.244834] usb-storage: 2a 00 00 74 20 9f 00 00 48 00
[ 350.244853] usb-storage: Bulk Command S 0x43425355 T 0x800 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 350.244859] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 350.245756] usb-storage: Status code 0; transferred 31/31
[ 350.245761] usb-storage: -- transfer complete
[ 350.245765] usb-storage: Bulk command transfer result=0
[ 350.245770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 350.355772] usb-storage: Status code 0; transferred 36864/36864
[ 350.355777] usb-storage: -- transfer complete
[ 350.355781] usb-storage: Bulk data transfer result 0x0
[ 350.355785] usb-storage: Attempting to get CSW...
[ 350.355790] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 350.380756] usb-storage: Status code 0; transferred 13/13
[ 350.380760] usb-storage: -- transfer complete
[ 350.380764] usb-storage: Bulk status result = 0
[ 350.380770] usb-storage: Bulk Status S 0x53425355 T 0x800 R 0 Stat 0x0
[ 350.380775] usb-storage: scsi cmd done, result=0x0
[ 350.380781] usb-storage: *** thread sleeping.
[ 350.380857] usb-storage: queuecommand called
[ 350.380868] usb-storage: *** thread awakened.
[ 350.380873] usb-storage: Command WRITE_10 (10 bytes)
[ 350.380877] usb-storage: 2a 00 00 74 20 e7 00 00 08 00
[ 350.380895] usb-storage: Bulk Command S 0x43425355 T 0x801 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 350.380901] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 350.381752] usb-storage: Status code 0; transferred 31/31
[ 350.381757] usb-storage: -- transfer complete
[ 350.381761] usb-storage: Bulk command transfer result=0
[ 350.381766] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 350.388776] usb-storage: Status code 0; transferred 4096/4096
[ 350.388781] usb-storage: -- transfer complete
[ 350.388785] usb-storage: Bulk data transfer result 0x0
[ 350.388789] usb-storage: Attempting to get CSW...
[ 350.388794] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 350.390736] usb-storage: Status code 0; transferred 13/13
[ 350.390740] usb-storage: -- transfer complete
[ 350.390744] usb-storage: Bulk status result = 0
[ 350.390750] usb-storage: Bulk Status S 0x53425355 T 0x801 R 0 Stat 0x0
[ 350.390755] usb-storage: scsi cmd done, result=0x0
[ 350.390762] usb-storage: *** thread sleeping.
[ 361.749628] usb-storage: queuecommand called
[ 361.749646] usb-storage: *** thread awakened.
[ 361.749653] usb-storage: Command WRITE_10 (10 bytes)
[ 361.749657] usb-storage: 2a 00 00 74 20 ef 00 00 68 00
[ 361.749677] usb-storage: Bulk Command S 0x43425355 T 0x802 L 53248 F 0 Trg 0 LUN 0 CL 10
[ 361.749684] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 361.750768] usb-storage: Status code 0; transferred 31/31
[ 361.750773] usb-storage: -- transfer complete
[ 361.750777] usb-storage: Bulk command transfer result=0
[ 361.750784] usb-storage: usb_stor_bulk_transfer_sglist: xfer 53248 bytes, 13 entries
[ 361.841777] usb-storage: Status code 0; transferred 53248/53248
[ 361.841783] usb-storage: -- transfer complete
[ 361.841788] usb-storage: Bulk data transfer result 0x0
[ 361.841792] usb-storage: Attempting to get CSW...
[ 361.841797] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 361.846744] usb-storage: Status code 0; transferred 13/13
[ 361.846749] usb-storage: -- transfer complete
[ 361.846753] usb-storage: Bulk status result = 0
[ 361.846759] usb-storage: Bulk Status S 0x53425355 T 0x802 R 0 Stat 0x0
[ 361.846765] usb-storage: scsi cmd done, result=0x0
[ 361.846772] usb-storage: *** thread sleeping.
[ 361.846895] usb-storage: queuecommand called
[ 361.846907] usb-storage: *** thread awakened.
[ 361.846913] usb-storage: Command WRITE_10 (10 bytes)
[ 361.846917] usb-storage: 2a 00 00 74 21 57 00 00 08 00
[ 361.846936] usb-storage: Bulk Command S 0x43425355 T 0x803 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 361.846942] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 361.847765] usb-storage: Status code 0; transferred 31/31
[ 361.847771] usb-storage: -- transfer complete
[ 361.847776] usb-storage: Bulk command transfer result=0
[ 361.847783] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 361.853776] usb-storage: Status code 0; transferred 4096/4096
[ 361.853781] usb-storage: -- transfer complete
[ 361.853785] usb-storage: Bulk data transfer result 0x0
[ 361.853789] usb-storage: Attempting to get CSW...
[ 361.853794] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 361.854756] usb-storage: Status code 0; transferred 13/13
[ 361.854760] usb-storage: -- transfer complete
[ 361.854764] usb-storage: Bulk status result = 0
[ 361.854769] usb-storage: Bulk Status S 0x53425355 T 0x803 R 0 Stat 0x0
[ 361.854774] usb-storage: scsi cmd done, result=0x0
[ 361.854783] usb-storage: *** thread sleeping.
[ 365.010047] usb-storage: queuecommand called
[ 365.010079] usb-storage: *** thread awakened.
[ 365.010087] usb-storage: Command WRITE_10 (10 bytes)
[ 365.010091] usb-storage: 2a 00 00 b8 bb 37 00 00 40 00
[ 365.010111] usb-storage: Bulk Command S 0x43425355 T 0x804 L 32768 F 0 Trg 0 LUN 0 CL 10
[ 365.010117] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 365.011755] usb-storage: Status code 0; transferred 31/31
[ 365.011760] usb-storage: -- transfer complete
[ 365.011764] usb-storage: Bulk command transfer result=0
[ 365.011770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 365.198773] usb-storage: Status code 0; transferred 32768/32768
[ 365.198778] usb-storage: -- transfer complete
[ 365.198783] usb-storage: Bulk data transfer result 0x0
[ 365.198787] usb-storage: Attempting to get CSW...
[ 365.198792] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 365.224749] usb-storage: Status code 0; transferred 13/13
[ 365.224754] usb-storage: -- transfer complete
[ 365.224758] usb-storage: Bulk status result = 0
[ 365.224764] usb-storage: Bulk Status S 0x53425355 T 0x804 R 0 Stat 0x0
[ 365.224769] usb-storage: scsi cmd done, result=0x0
[ 365.224776] usb-storage: *** thread sleeping.
[ 365.224816] usb-storage: queuecommand called
[ 365.224827] usb-storage: *** thread awakened.
[ 365.224833] usb-storage: Command WRITE_10 (10 bytes)
[ 365.224837] usb-storage: 2a 00 00 b8 e8 9f 00 00 40 00
[ 365.224855] usb-storage: Bulk Command S 0x43425355 T 0x805 L 32768 F 0 Trg 0 LUN 0 CL 10
[ 365.224861] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 365.225756] usb-storage: Status code 0; transferred 31/31
[ 365.225760] usb-storage: -- transfer complete
[ 365.225764] usb-storage: Bulk command transfer result=0
[ 365.225770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 365.316770] usb-storage: Status code 0; transferred 32768/32768
[ 365.316775] usb-storage: -- transfer complete
[ 365.316779] usb-storage: Bulk data transfer result 0x0
[ 365.316783] usb-storage: Attempting to get CSW...
[ 365.316789] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 365.318737] usb-storage: Status code 0; transferred 13/13
[ 365.318741] usb-storage: -- transfer complete
[ 365.318745] usb-storage: Bulk status result = 0
[ 365.318750] usb-storage: Bulk Status S 0x53425355 T 0x805 R 0 Stat 0x0
[ 365.318756] usb-storage: scsi cmd done, result=0x0
[ 365.318762] usb-storage: *** thread sleeping.
[ 367.040167] usb-storage: queuecommand called
[ 367.040180] usb-storage: *** thread awakened.
[ 367.040186] usb-storage: Command WRITE_10 (10 bytes)
[ 367.040190] usb-storage: 2a 00 00 74 21 5f 00 00 58 00
[ 367.040209] usb-storage: Bulk Command S 0x43425355 T 0x806 L 45056 F 0 Trg 0 LUN 0 CL 10
[ 367.040215] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 367.041748] usb-storage: Status code 0; transferred 31/31
[ 367.041753] usb-storage: -- transfer complete
[ 367.041757] usb-storage: Bulk command transfer result=0
[ 367.041763] usb-storage: usb_stor_bulk_transfer_sglist: xfer 45056 bytes, 11 entries
[ 367.152778] usb-storage: Status code 0; transferred 45056/45056
[ 367.152783] usb-storage: -- transfer complete
[ 367.152788] usb-storage: Bulk data transfer result 0x0
[ 367.152791] usb-storage: Attempting to get CSW...
[ 367.152796] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 367.177747] usb-storage: Status code 0; transferred 13/13
[ 367.177751] usb-storage: -- transfer complete
[ 367.177756] usb-storage: Bulk status result = 0
[ 367.177761] usb-storage: Bulk Status S 0x53425355 T 0x806 R 0 Stat 0x0
[ 367.177766] usb-storage: scsi cmd done, result=0x0
[ 367.177773] usb-storage: *** thread sleeping.
[ 367.177858] usb-storage: queuecommand called
[ 367.177869] usb-storage: *** thread awakened.
[ 367.177874] usb-storage: Command WRITE_10 (10 bytes)
[ 367.177878] usb-storage: 2a 00 00 74 21 b7 00 00 08 00
[ 367.177897] usb-storage: Bulk Command S 0x43425355 T 0x807 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 367.177903] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 367.178744] usb-storage: Status code 0; transferred 31/31
[ 367.178749] usb-storage: -- transfer complete
[ 367.178753] usb-storage: Bulk command transfer result=0
[ 367.178759] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 367.183754] usb-storage: Status code 0; transferred 4096/4096
[ 367.183759] usb-storage: -- transfer complete
[ 367.183763] usb-storage: Bulk data transfer result 0x0
[ 367.183767] usb-storage: Attempting to get CSW...
[ 367.183772] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 367.185732] usb-storage: Status code 0; transferred 13/13
[ 367.185737] usb-storage: -- transfer complete
[ 367.185741] usb-storage: Bulk status result = 0
[ 367.185746] usb-storage: Bulk Status S 0x53425355 T 0x807 R 0 Stat 0x0
[ 367.185751] usb-storage: scsi cmd done, result=0x0
[ 367.185758] usb-storage: *** thread sleeping.
[ 370.010043] usb-storage: queuecommand called
[ 370.010066] usb-storage: *** thread awakened.
[ 370.010074] usb-storage: Command WRITE_10 (10 bytes)
[ 370.010078] usb-storage: 2a 00 00 c4 0f 57 00 00 18 00
[ 370.010098] usb-storage: Bulk Command S 0x43425355 T 0x808 L 12288 F 0 Trg 0 LUN 0 CL 10
[ 370.010104] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 370.011756] usb-storage: Status code 0; transferred 31/31
[ 370.011760] usb-storage: -- transfer complete
[ 370.011764] usb-storage: Bulk command transfer result=0
[ 370.011770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 370.183772] usb-storage: Status code 0; transferred 12288/12288
[ 370.183778] usb-storage: -- transfer complete
[ 370.183782] usb-storage: Bulk data transfer result 0x0
[ 370.183786] usb-storage: Attempting to get CSW...
[ 370.183791] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 370.209762] usb-storage: Status code 0; transferred 13/13
[ 370.209767] usb-storage: -- transfer complete
[ 370.209772] usb-storage: Bulk status result = 0
[ 370.209777] usb-storage: Bulk Status S 0x53425355 T 0x808 R 0 Stat 0x0
[ 370.209782] usb-storage: scsi cmd done, result=0x0
[ 370.209790] usb-storage: *** thread sleeping.
[ 370.209822] usb-storage: queuecommand called
[ 370.209836] usb-storage: *** thread awakened.
[ 370.209842] usb-storage: Command WRITE_10 (10 bytes)
[ 370.209846] usb-storage: 2a 00 00 c4 0f e7 00 00 08 00
[ 370.209865] usb-storage: Bulk Command S 0x43425355 T 0x809 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 370.209871] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 370.210749] usb-storage: Status code 0; transferred 31/31
[ 370.210753] usb-storage: -- transfer complete
[ 370.210758] usb-storage: Bulk command transfer result=0
[ 370.210763] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 370.242750] usb-storage: Status code 0; transferred 4096/4096
[ 370.242752] usb-storage: -- transfer complete
[ 370.242754] usb-storage: Bulk data transfer result 0x0
[ 370.242756] usb-storage: Attempting to get CSW...
[ 370.242759] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 370.246745] usb-storage: Status code 0; transferred 13/13
[ 370.246747] usb-storage: -- transfer complete
[ 370.246749] usb-storage: Bulk status result = 0
[ 370.246752] usb-storage: Bulk Status S 0x53425355 T 0x809 R 0 Stat 0x0
[ 370.246755] usb-storage: scsi cmd done, result=0x0
[ 370.246759] usb-storage: *** thread sleeping.
[ 370.246774] usb-storage: queuecommand called
[ 370.246779] usb-storage: *** thread awakened.
[ 370.246781] usb-storage: Command WRITE_10 (10 bytes)
[ 370.246783] usb-storage: 2a 00 00 c5 80 3f 00 00 08 00
[ 370.246793] usb-storage: Bulk Command S 0x43425355 T 0x80a L 4096 F 0 Trg 0 LUN 0 CL 10
[ 370.246796] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 370.247731] usb-storage: Status code 0; transferred 31/31
[ 370.247733] usb-storage: -- transfer complete
[ 370.247735] usb-storage: Bulk command transfer result=0
[ 370.247738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 370.252755] usb-storage: Status code 0; transferred 4096/4096
[ 370.252757] usb-storage: -- transfer complete
[ 370.252759] usb-storage: Bulk data transfer result 0x0
[ 370.252761] usb-storage: Attempting to get CSW...
[ 370.252764] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 370.253732] usb-storage: Status code 0; transferred 13/13
[ 370.253734] usb-storage: -- transfer complete
[ 370.253736] usb-storage: Bulk status result = 0
[ 370.253739] usb-storage: Bulk Status S 0x53425355 T 0x80a R 0 Stat 0x0
[ 370.253742] usb-storage: scsi cmd done, result=0x0
[ 370.253745] usb-storage: *** thread sleeping.
[ 377.155032] usb-storage: queuecommand called
[ 377.155067] usb-storage: *** thread awakened.
[ 377.155075] usb-storage: Command WRITE_10 (10 bytes)
[ 377.155080] usb-storage: 2a 00 00 74 21 bf 00 00 68 00
[ 377.155099] usb-storage: Bulk Command S 0x43425355 T 0x80b L 53248 F 0 Trg 0 LUN 0 CL 10
[ 377.155106] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 377.156778] usb-storage: Status code 0; transferred 31/31
[ 377.156783] usb-storage: -- transfer complete
[ 377.156788] usb-storage: Bulk command transfer result=0
[ 377.156794] usb-storage: usb_stor_bulk_transfer_sglist: xfer 53248 bytes, 13 entries
[-- Attachment #14: dmesg-log-2.log --]
[-- Type: text/plain, Size: 124850 bytes --]
590.553799] usb-storage: Bulk command transfer result=0
[ 590.553806] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 590.584802] usb-storage: Status code 0; transferred 32768/32768
[ 590.584808] usb-storage: -- transfer complete
[ 590.584812] usb-storage: Bulk data transfer result 0x0
[ 590.584816] usb-storage: Attempting to get CSW...
[ 590.584821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 590.585780] usb-storage: Status code 0; transferred 13/13
[ 590.585785] usb-storage: -- transfer complete
[ 590.585790] usb-storage: Bulk status result = 0
[ 590.585795] usb-storage: Bulk Status S 0x53425355 T 0xbdf R 0 Stat 0x0
[ 590.585801] usb-storage: scsi cmd done, result=0x0
[ 590.585808] usb-storage: *** thread sleeping.
[ 590.585844] usb-storage: queuecommand called
[ 590.585855] usb-storage: *** thread awakened.
[ 590.585860] usb-storage: Command READ_10 (10 bytes)
[ 590.585864] usb-storage: 28 00 00 69 30 3f 00 00 30 00
[ 590.585883] usb-storage: Bulk Command S 0x43425355 T 0xbe0 L 24576 F 128 Trg 0 LUN 0 CL 10
[ 590.585889] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 590.586774] usb-storage: Status code 0; transferred 31/31
[ 590.586779] usb-storage: -- transfer complete
[ 590.586782] usb-storage: Bulk command transfer result=0
[ 590.586788] usb-storage: usb_stor_bulk_transfer_sglist: xfer 24576 bytes, 6 entries
[ 590.609791] usb-storage: Status code 0; transferred 24576/24576
[ 590.609796] usb-storage: -- transfer complete
[ 590.609800] usb-storage: Bulk data transfer result 0x0
[ 590.609804] usb-storage: Attempting to get CSW...
[ 590.609809] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 590.610782] usb-storage: Status code 0; transferred 13/13
[ 590.610787] usb-storage: -- transfer complete
[ 590.610792] usb-storage: Bulk status result = 0
[ 590.610797] usb-storage: Bulk Status S 0x53425355 T 0xbe0 R 0 Stat 0x0
[ 590.610803] usb-storage: scsi cmd done, result=0x0
[ 590.610811] usb-storage: *** thread sleeping.
[ 600.010044] usb-storage: queuecommand called
[ 600.010062] usb-storage: *** thread awakened.
[ 600.010069] usb-storage: Command WRITE_10 (10 bytes)
[ 600.010073] usb-storage: 2a 00 00 b8 ff 1f 00 00 58 00
[ 600.010093] usb-storage: Bulk Command S 0x43425355 T 0xbe1 L 45056 F 0 Trg 0 LUN 0 CL 10
[ 600.010099] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 600.011769] usb-storage: Status code 0; transferred 31/31
[ 600.011773] usb-storage: -- transfer complete
[ 600.011778] usb-storage: Bulk command transfer result=0
[ 600.011783] usb-storage: usb_stor_bulk_transfer_sglist: xfer 45056 bytes, 11 entries
[ 600.208801] usb-storage: Status code 0; transferred 45056/45056
[ 600.208807] usb-storage: -- transfer complete
[ 600.208812] usb-storage: Bulk data transfer result 0x0
[ 600.208815] usb-storage: Attempting to get CSW...
[ 600.208820] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 600.210791] usb-storage: Status code 0; transferred 13/13
[ 600.210797] usb-storage: -- transfer complete
[ 600.210801] usb-storage: Bulk status result = 0
[ 600.210807] usb-storage: Bulk Status S 0x53425355 T 0xbe1 R 0 Stat 0x0
[ 600.210813] usb-storage: scsi cmd done, result=0x0
[ 600.210820] usb-storage: *** thread sleeping.
[ 600.210869] usb-storage: queuecommand called
[ 600.210886] usb-storage: *** thread awakened.
[ 600.210891] usb-storage: Command WRITE_10 (10 bytes)
[ 600.210895] usb-storage: 2a 00 00 b9 25 57 00 00 58 00
[ 600.210914] usb-storage: Bulk Command S 0x43425355 T 0xbe2 L 45056 F 0 Trg 0 LUN 0 CL 10
[ 600.210920] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 600.211771] usb-storage: Status code 0; transferred 31/31
[ 600.211775] usb-storage: -- transfer complete
[ 600.211779] usb-storage: Bulk command transfer result=0
[ 600.211785] usb-storage: usb_stor_bulk_transfer_sglist: xfer 45056 bytes, 11 entries
[ 600.347803] usb-storage: Status code 0; transferred 45056/45056
[ 600.347808] usb-storage: -- transfer complete
[ 600.347812] usb-storage: Bulk data transfer result 0x0
[ 600.347816] usb-storage: Attempting to get CSW...
[ 600.347821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 600.351776] usb-storage: Status code 0; transferred 13/13
[ 600.351781] usb-storage: -- transfer complete
[ 600.351785] usb-storage: Bulk status result = 0
[ 600.351791] usb-storage: Bulk Status S 0x53425355 T 0xbe2 R 0 Stat 0x0
[ 600.351796] usb-storage: scsi cmd done, result=0x0
[ 600.351804] usb-storage: *** thread sleeping.
[ 600.351848] usb-storage: queuecommand called
[ 600.351858] usb-storage: *** thread awakened.
[ 600.351864] usb-storage: Command WRITE_10 (10 bytes)
[ 600.351867] usb-storage: 2a 00 00 74 2e 77 00 00 48 00
[ 600.351887] usb-storage: Bulk Command S 0x43425355 T 0xbe3 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 600.351893] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 600.352768] usb-storage: Status code 0; transferred 31/31
[ 600.352774] usb-storage: -- transfer complete
[ 600.352779] usb-storage: Bulk command transfer result=0
[ 600.352786] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 600.636800] usb-storage: Status code 0; transferred 36864/36864
[ 600.636805] usb-storage: -- transfer complete
[ 600.636810] usb-storage: Bulk data transfer result 0x0
[ 600.636814] usb-storage: Attempting to get CSW...
[ 600.636818] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 600.660774] usb-storage: Status code 0; transferred 13/13
[ 600.660779] usb-storage: -- transfer complete
[ 600.660783] usb-storage: Bulk status result = 0
[ 600.660788] usb-storage: Bulk Status S 0x53425355 T 0xbe3 R 0 Stat 0x0
[ 600.660793] usb-storage: scsi cmd done, result=0x0
[ 600.660800] usb-storage: *** thread sleeping.
[ 600.660906] usb-storage: queuecommand called
[ 600.661520] usb-storage: *** thread awakened.
[ 600.661527] usb-storage: Command WRITE_10 (10 bytes)
[ 600.661531] usb-storage: 2a 00 00 74 2e bf 00 00 08 00
[ 600.661549] usb-storage: Bulk Command S 0x43425355 T 0xbe4 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 600.661555] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 600.661787] usb-storage: Status code 0; transferred 31/31
[ 600.661791] usb-storage: -- transfer complete
[ 600.661795] usb-storage: Bulk command transfer result=0
[ 600.661801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 600.667790] usb-storage: Status code 0; transferred 4096/4096
[ 600.667795] usb-storage: -- transfer complete
[ 600.667799] usb-storage: Bulk data transfer result 0x0
[ 600.667803] usb-storage: Attempting to get CSW...
[ 600.667807] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 600.669766] usb-storage: Status code 0; transferred 13/13
[ 600.669770] usb-storage: -- transfer complete
[ 600.669774] usb-storage: Bulk status result = 0
[ 600.669779] usb-storage: Bulk Status S 0x53425355 T 0xbe4 R 0 Stat 0x0
[ 600.669784] usb-storage: scsi cmd done, result=0x0
[ 600.669791] usb-storage: *** thread sleeping.
[ 605.040168] usb-storage: queuecommand called
[ 605.040182] usb-storage: *** thread awakened.
[ 605.040188] usb-storage: Command WRITE_10 (10 bytes)
[ 605.040192] usb-storage: 2a 00 00 74 2e c7 00 00 48 00
[ 605.040211] usb-storage: Bulk Command S 0x43425355 T 0xbe5 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 605.040217] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 605.041770] usb-storage: Status code 0; transferred 31/31
[ 605.041774] usb-storage: -- transfer complete
[ 605.041778] usb-storage: Bulk command transfer result=0
[ 605.041784] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 605.196799] usb-storage: Status code 0; transferred 36864/36864
[ 605.196804] usb-storage: -- transfer complete
[ 605.196809] usb-storage: Bulk data transfer result 0x0
[ 605.196813] usb-storage: Attempting to get CSW...
[ 605.196818] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 605.201791] usb-storage: Status code 0; transferred 13/13
[ 605.201797] usb-storage: -- transfer complete
[ 605.201801] usb-storage: Bulk status result = 0
[ 605.201807] usb-storage: Bulk Status S 0x53425355 T 0xbe5 R 0 Stat 0x0
[ 605.201812] usb-storage: scsi cmd done, result=0x0
[ 605.201820] usb-storage: *** thread sleeping.
[ 605.201901] usb-storage: queuecommand called
[ 605.201916] usb-storage: *** thread awakened.
[ 605.201923] usb-storage: Command WRITE_10 (10 bytes)
[ 605.201927] usb-storage: 2a 00 00 74 2f 0f 00 00 08 00
[ 605.201946] usb-storage: Bulk Command S 0x43425355 T 0xbe6 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 605.201952] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 605.202787] usb-storage: Status code 0; transferred 31/31
[ 605.202792] usb-storage: -- transfer complete
[ 605.202798] usb-storage: Bulk command transfer result=0
[ 605.202803] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 605.208801] usb-storage: Status code 0; transferred 4096/4096
[ 605.208805] usb-storage: -- transfer complete
[ 605.208810] usb-storage: Bulk data transfer result 0x0
[ 605.208814] usb-storage: Attempting to get CSW...
[ 605.208819] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 605.210783] usb-storage: Status code 0; transferred 13/13
[ 605.210787] usb-storage: -- transfer complete
[ 605.210792] usb-storage: Bulk status result = 0
[ 605.210798] usb-storage: Bulk Status S 0x53425355 T 0xbe6 R 0 Stat 0x0
[ 605.210803] usb-storage: scsi cmd done, result=0x0
[ 605.210810] usb-storage: *** thread sleeping.
[ 609.946035] usb-storage: queuecommand called
[ 609.946083] usb-storage: *** thread awakened.
[ 609.946092] usb-storage: Command WRITE_10 (10 bytes)
[ 609.946096] usb-storage: 2a 00 00 b9 24 ef 00 00 08 00
[ 609.946117] usb-storage: Bulk Command S 0x43425355 T 0xbe7 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 609.946123] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 609.947802] usb-storage: Status code 0; transferred 31/31
[ 609.947807] usb-storage: -- transfer complete
[ 609.947811] usb-storage: Bulk command transfer result=0
[ 609.947817] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 609.961818] usb-storage: Status code 0; transferred 4096/4096
[ 609.961825] usb-storage: -- transfer complete
[ 609.961830] usb-storage: Bulk data transfer result 0x0
[ 609.961834] usb-storage: Attempting to get CSW...
[ 609.961840] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 609.986771] usb-storage: Status code 0; transferred 13/13
[ 609.986776] usb-storage: -- transfer complete
[ 609.986781] usb-storage: Bulk status result = 0
[ 609.986786] usb-storage: Bulk Status S 0x53425355 T 0xbe7 R 0 Stat 0x0
[ 609.986793] usb-storage: scsi cmd done, result=0x0
[ 609.986802] usb-storage: *** thread sleeping.
[ 609.986844] usb-storage: queuecommand called
[ 609.986855] usb-storage: *** thread awakened.
[ 609.986861] usb-storage: Command WRITE_10 (10 bytes)
[ 609.986865] usb-storage: 2a 00 00 74 2f 17 00 00 50 00
[ 609.986884] usb-storage: Bulk Command S 0x43425355 T 0xbe8 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 609.986890] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 609.987784] usb-storage: Status code 0; transferred 31/31
[ 609.987789] usb-storage: -- transfer complete
[ 609.987793] usb-storage: Bulk command transfer result=0
[ 609.987799] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 610.151340] wlan0: direct probe to AP 00:1c:10:32:94:61 try 1
[ 610.350077] wlan0: direct probe to AP 00:1c:10:32:94:61 try 2
[ 610.363807] usb-storage: Status code 0; transferred 40960/40960
[ 610.363812] usb-storage: -- transfer complete
[ 610.363816] usb-storage: Bulk data transfer result 0x0
[ 610.363821] usb-storage: Attempting to get CSW...
[ 610.363826] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.365785] usb-storage: Status code 0; transferred 13/13
[ 610.365789] usb-storage: -- transfer complete
[ 610.365793] usb-storage: Bulk status result = 0
[ 610.365799] usb-storage: Bulk Status S 0x53425355 T 0xbe8 R 0 Stat 0x0
[ 610.365804] usb-storage: scsi cmd done, result=0x0
[ 610.365811] usb-storage: *** thread sleeping.
[ 610.365849] usb-storage: queuecommand called
[ 610.365865] usb-storage: *** thread awakened.
[ 610.365871] usb-storage: Command WRITE_10 (10 bytes)
[ 610.365875] usb-storage: 2a 00 00 c4 d7 f7 00 00 08 00
[ 610.365894] usb-storage: Bulk Command S 0x43425355 T 0xbe9 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 610.365900] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.366784] usb-storage: Status code 0; transferred 31/31
[ 610.366788] usb-storage: -- transfer complete
[ 610.366792] usb-storage: Bulk command transfer result=0
[ 610.366798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 610.435798] usb-storage: Status code 0; transferred 4096/4096
[ 610.435802] usb-storage: -- transfer complete
[ 610.435807] usb-storage: Bulk data transfer result 0x0
[ 610.435810] usb-storage: Attempting to get CSW...
[ 610.435815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.460779] usb-storage: Status code 0; transferred 13/13
[ 610.460783] usb-storage: -- transfer complete
[ 610.460788] usb-storage: Bulk status result = 0
[ 610.460793] usb-storage: Bulk Status S 0x53425355 T 0xbe9 R 0 Stat 0x0
[ 610.460798] usb-storage: scsi cmd done, result=0x0
[ 610.460805] usb-storage: *** thread sleeping.
[ 610.460827] usb-storage: queuecommand called
[ 610.460841] usb-storage: *** thread awakened.
[ 610.460847] usb-storage: Command WRITE_10 (10 bytes)
[ 610.460850] usb-storage: 2a 00 00 c5 80 3f 00 00 08 00
[ 610.460869] usb-storage: Bulk Command S 0x43425355 T 0xbea L 4096 F 0 Trg 0 LUN 0 CL 10
[ 610.460875] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.461787] usb-storage: Status code 0; transferred 31/31
[ 610.461791] usb-storage: -- transfer complete
[ 610.461795] usb-storage: Bulk command transfer result=0
[ 610.461800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 610.466804] usb-storage: Status code 0; transferred 4096/4096
[ 610.466808] usb-storage: -- transfer complete
[ 610.466813] usb-storage: Bulk data transfer result 0x0
[ 610.466816] usb-storage: Attempting to get CSW...
[ 610.466821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.467770] usb-storage: Status code 0; transferred 13/13
[ 610.467775] usb-storage: -- transfer complete
[ 610.467778] usb-storage: Bulk status result = 0
[ 610.467784] usb-storage: Bulk Status S 0x53425355 T 0xbea R 0 Stat 0x0
[ 610.467789] usb-storage: scsi cmd done, result=0x0
[ 610.467795] usb-storage: *** thread sleeping.
[ 610.467812] usb-storage: queuecommand called
[ 610.467826] usb-storage: *** thread awakened.
[ 610.467831] usb-storage: Command WRITE_10 (10 bytes)
[ 610.467834] usb-storage: 2a 00 00 c4 0f 57 00 00 18 00
[ 610.467853] usb-storage: Bulk Command S 0x43425355 T 0xbeb L 12288 F 0 Trg 0 LUN 0 CL 10
[ 610.467858] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.468783] usb-storage: Status code 0; transferred 31/31
[ 610.468787] usb-storage: -- transfer complete
[ 610.468791] usb-storage: Bulk command transfer result=0
[ 610.468796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 610.552537] wlan0: direct probe to AP 00:1c:10:32:94:61 try 3
[ 610.630798] usb-storage: Status code 0; transferred 12288/12288
[ 610.630803] usb-storage: -- transfer complete
[ 610.630808] usb-storage: Bulk data transfer result 0x0
[ 610.630812] usb-storage: Attempting to get CSW...
[ 610.630817] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.632789] usb-storage: Status code 0; transferred 13/13
[ 610.632795] usb-storage: -- transfer complete
[ 610.632800] usb-storage: Bulk status result = 0
[ 610.632807] usb-storage: Bulk Status S 0x53425355 T 0xbeb R 0 Stat 0x0
[ 610.632813] usb-storage: scsi cmd done, result=0x0
[ 610.632821] usb-storage: *** thread sleeping.
[ 610.632848] usb-storage: queuecommand called
[ 610.632863] usb-storage: *** thread awakened.
[ 610.632870] usb-storage: Command WRITE_10 (10 bytes)
[ 610.632874] usb-storage: 2a 00 00 c4 0f e7 00 00 08 00
[ 610.632897] usb-storage: Bulk Command S 0x43425355 T 0xbec L 4096 F 0 Trg 0 LUN 0 CL 10
[ 610.632904] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.633781] usb-storage: Status code 0; transferred 31/31
[ 610.633787] usb-storage: -- transfer complete
[ 610.633792] usb-storage: Bulk command transfer result=0
[ 610.633798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 610.665798] usb-storage: Status code 0; transferred 4096/4096
[ 610.665802] usb-storage: -- transfer complete
[ 610.665806] usb-storage: Bulk data transfer result 0x0
[ 610.665810] usb-storage: Attempting to get CSW...
[ 610.665815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.669785] usb-storage: Status code 0; transferred 13/13
[ 610.669789] usb-storage: -- transfer complete
[ 610.669792] usb-storage: Bulk status result = 0
[ 610.669798] usb-storage: Bulk Status S 0x53425355 T 0xbec R 0 Stat 0x0
[ 610.669803] usb-storage: scsi cmd done, result=0x0
[ 610.669809] usb-storage: *** thread sleeping.
[ 610.669827] usb-storage: queuecommand called
[ 610.669836] usb-storage: *** thread awakened.
[ 610.669841] usb-storage: Command WRITE_10 (10 bytes)
[ 610.669845] usb-storage: 2a 00 00 74 2f 67 00 00 08 00
[ 610.669863] usb-storage: Bulk Command S 0x43425355 T 0xbed L 4096 F 0 Trg 0 LUN 0 CL 10
[ 610.669868] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.670765] usb-storage: Status code 0; transferred 31/31
[ 610.670770] usb-storage: -- transfer complete
[ 610.670774] usb-storage: Bulk command transfer result=0
[ 610.670780] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 610.750044] wlan0: direct probe to AP 00:1c:10:32:94:61 timed out
[ 611.096798] usb-storage: Status code 0; transferred 4096/4096
[ 611.096802] usb-storage: -- transfer complete
[ 611.096807] usb-storage: Bulk data transfer result 0x0
[ 611.096811] usb-storage: Attempting to get CSW...
[ 611.096816] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 611.120790] usb-storage: Status code 0; transferred 13/13
[ 611.120794] usb-storage: -- transfer complete
[ 611.120798] usb-storage: Bulk status result = 0
[ 611.120803] usb-storage: Bulk Status S 0x53425355 T 0xbed R 0 Stat 0x0
[ 611.120809] usb-storage: scsi cmd done, result=0x0
[ 611.120816] usb-storage: *** thread sleeping.
[ 611.121008] usb-storage: queuecommand called
[ 611.121022] usb-storage: *** thread awakened.
[ 611.121027] usb-storage: Command WRITE_10 (10 bytes)
[ 611.121031] usb-storage: 2a 00 00 b9 24 ef 00 00 08 00
[ 611.121050] usb-storage: Bulk Command S 0x43425355 T 0xbee L 4096 F 0 Trg 0 LUN 0 CL 10
[ 611.121056] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 611.121778] usb-storage: Status code 0; transferred 31/31
[ 611.121783] usb-storage: -- transfer complete
[ 611.121787] usb-storage: Bulk command transfer result=0
[ 611.121792] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 611.319797] usb-storage: Status code 0; transferred 4096/4096
[ 611.319802] usb-storage: -- transfer complete
[ 611.319806] usb-storage: Bulk data transfer result 0x0
[ 611.319810] usb-storage: Attempting to get CSW...
[ 611.319815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 611.320764] usb-storage: Status code 0; transferred 13/13
[ 611.320769] usb-storage: -- transfer complete
[ 611.320773] usb-storage: Bulk status result = 0
[ 611.320778] usb-storage: Bulk Status S 0x53425355 T 0xbee R 0 Stat 0x0
[ 611.320783] usb-storage: scsi cmd done, result=0x0
[ 611.320790] usb-storage: *** thread sleeping.
[ 611.320811] usb-storage: queuecommand called
[ 611.320821] usb-storage: *** thread awakened.
[ 611.320826] usb-storage: Command WRITE_10 (10 bytes)
[ 611.320829] usb-storage: 2a 00 00 74 2f 6f 00 00 10 00
[ 611.320848] usb-storage: Bulk Command S 0x43425355 T 0xbef L 8192 F 0 Trg 0 LUN 0 CL 10
[ 611.320853] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 611.321789] usb-storage: Status code 0; transferred 31/31
[ 611.321796] usb-storage: -- transfer complete
[ 611.321801] usb-storage: Bulk command transfer result=0
[ 611.321808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 611.681796] usb-storage: Status code 0; transferred 8192/8192
[ 611.681801] usb-storage: -- transfer complete
[ 611.681805] usb-storage: Bulk data transfer result 0x0
[ 611.681809] usb-storage: Attempting to get CSW...
[ 611.681814] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 611.683768] usb-storage: Status code 0; transferred 13/13
[ 611.683773] usb-storage: -- transfer complete
[ 611.683777] usb-storage: Bulk status result = 0
[ 611.683782] usb-storage: Bulk Status S 0x53425355 T 0xbef R 0 Stat 0x0
[ 611.683787] usb-storage: scsi cmd done, result=0x0
[ 611.683793] usb-storage: *** thread sleeping.
[ 611.683859] usb-storage: queuecommand called
[ 611.683887] usb-storage: *** thread awakened.
[ 611.683893] usb-storage: Command WRITE_10 (10 bytes)
[ 611.683896] usb-storage: 2a 00 00 74 2f 7f 00 00 08 00
[ 611.683915] usb-storage: Bulk Command S 0x43425355 T 0xbf0 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 611.683920] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 611.684783] usb-storage: Status code 0; transferred 31/31
[ 611.684787] usb-storage: -- transfer complete
[ 611.684791] usb-storage: Bulk command transfer result=0
[ 611.684797] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 611.689786] usb-storage: Status code 0; transferred 4096/4096
[ 611.689790] usb-storage: -- transfer complete
[ 611.689794] usb-storage: Bulk data transfer result 0x0
[ 611.689798] usb-storage: Attempting to get CSW...
[ 611.689803] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 611.691784] usb-storage: Status code 0; transferred 13/13
[ 611.691789] usb-storage: -- transfer complete
[ 611.691794] usb-storage: Bulk status result = 0
[ 611.691800] usb-storage: Bulk Status S 0x53425355 T 0xbf0 R 0 Stat 0x0
[ 611.691807] usb-storage: scsi cmd done, result=0x0
[ 611.691814] usb-storage: *** thread sleeping.
[ 617.012651] usb-storage: queuecommand called
[ 617.012666] usb-storage: *** thread awakened.
[ 617.012672] usb-storage: Command WRITE_10 (10 bytes)
[ 617.012676] usb-storage: 2a 00 00 74 2f 87 00 00 48 00
[ 617.012695] usb-storage: Bulk Command S 0x43425355 T 0xbf1 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 617.012702] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 617.013772] usb-storage: Status code 0; transferred 31/31
[ 617.013777] usb-storage: -- transfer complete
[ 617.013781] usb-storage: Bulk command transfer result=0
[ 617.013787] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 617.199808] usb-storage: Status code 0; transferred 36864/36864
[ 617.199813] usb-storage: -- transfer complete
[ 617.199818] usb-storage: Bulk data transfer result 0x0
[ 617.199822] usb-storage: Attempting to get CSW...
[ 617.199827] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 617.204796] usb-storage: Status code 0; transferred 13/13
[ 617.204800] usb-storage: -- transfer complete
[ 617.204805] usb-storage: Bulk status result = 0
[ 617.204810] usb-storage: Bulk Status S 0x53425355 T 0xbf1 R 0 Stat 0x0
[ 617.204816] usb-storage: scsi cmd done, result=0x0
[ 617.204823] usb-storage: *** thread sleeping.
[ 617.204908] usb-storage: queuecommand called
[ 617.204919] usb-storage: *** thread awakened.
[ 617.204924] usb-storage: Command WRITE_10 (10 bytes)
[ 617.204928] usb-storage: 2a 00 00 74 2f cf 00 00 08 00
[ 617.204947] usb-storage: Bulk Command S 0x43425355 T 0xbf2 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 617.204953] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 617.205793] usb-storage: Status code 0; transferred 31/31
[ 617.205798] usb-storage: -- transfer complete
[ 617.205802] usb-storage: Bulk command transfer result=0
[ 617.205808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 617.211789] usb-storage: Status code 0; transferred 4096/4096
[ 617.211794] usb-storage: -- transfer complete
[ 617.211798] usb-storage: Bulk data transfer result 0x0
[ 617.211802] usb-storage: Attempting to get CSW...
[ 617.211807] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 617.213788] usb-storage: Status code 0; transferred 13/13
[ 617.213793] usb-storage: -- transfer complete
[ 617.213797] usb-storage: Bulk status result = 0
[ 617.213803] usb-storage: Bulk Status S 0x53425355 T 0xbf2 R 0 Stat 0x0
[ 617.213808] usb-storage: scsi cmd done, result=0x0
[ 617.213815] usb-storage: *** thread sleeping.
[ 625.010045] usb-storage: queuecommand called
[ 625.010075] usb-storage: *** thread awakened.
[ 625.010083] usb-storage: Command WRITE_10 (10 bytes)
[ 625.010087] usb-storage: 2a 00 00 b9 1e 37 00 00 60 00
[ 625.010107] usb-storage: Bulk Command S 0x43425355 T 0xbf3 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 625.010113] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 625.011786] usb-storage: Status code 0; transferred 31/31
[ 625.011790] usb-storage: -- transfer complete
[ 625.011795] usb-storage: Bulk command transfer result=0
[ 625.011800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 625.166820] usb-storage: Status code 0; transferred 49152/49152
[ 625.166825] usb-storage: -- transfer complete
[ 625.166830] usb-storage: Bulk data transfer result 0x0
[ 625.166834] usb-storage: Attempting to get CSW...
[ 625.166839] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 625.191780] usb-storage: Status code 0; transferred 13/13
[ 625.191784] usb-storage: -- transfer complete
[ 625.191788] usb-storage: Bulk status result = 0
[ 625.191794] usb-storage: Bulk Status S 0x53425355 T 0xbf3 R 0 Stat 0x0
[ 625.191799] usb-storage: scsi cmd done, result=0x0
[ 625.191807] usb-storage: *** thread sleeping.
[ 625.191853] usb-storage: queuecommand called
[ 625.191863] usb-storage: *** thread awakened.
[ 625.191868] usb-storage: Command WRITE_10 (10 bytes)
[ 625.191872] usb-storage: 2a 00 00 74 2f d7 00 00 48 00
[ 625.191891] usb-storage: Bulk Command S 0x43425355 T 0xbf4 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 625.191897] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 625.192768] usb-storage: Status code 0; transferred 31/31
[ 625.192772] usb-storage: -- transfer complete
[ 625.192776] usb-storage: Bulk command transfer result=0
[ 625.192782] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 625.500815] usb-storage: Status code 0; transferred 36864/36864
[ 625.500820] usb-storage: -- transfer complete
[ 625.500824] usb-storage: Bulk data transfer result 0x0
[ 625.500828] usb-storage: Attempting to get CSW...
[ 625.500833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 625.525790] usb-storage: Status code 0; transferred 13/13
[ 625.525794] usb-storage: -- transfer complete
[ 625.525798] usb-storage: Bulk status result = 0
[ 625.525804] usb-storage: Bulk Status S 0x53425355 T 0xbf4 R 0 Stat 0x0
[ 625.525809] usb-storage: scsi cmd done, result=0x0
[ 625.525816] usb-storage: *** thread sleeping.
[ 625.525903] usb-storage: queuecommand called
[ 625.525932] usb-storage: *** thread awakened.
[ 625.525938] usb-storage: Command WRITE_10 (10 bytes)
[ 625.525942] usb-storage: 2a 00 00 74 30 1f 00 00 08 00
[ 625.525961] usb-storage: Bulk Command S 0x43425355 T 0xbf5 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 625.525967] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 625.526787] usb-storage: Status code 0; transferred 31/31
[ 625.526791] usb-storage: -- transfer complete
[ 625.526795] usb-storage: Bulk command transfer result=0
[ 625.526800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 625.532785] usb-storage: Status code 0; transferred 4096/4096
[ 625.532789] usb-storage: -- transfer complete
[ 625.532794] usb-storage: Bulk data transfer result 0x0
[ 625.532797] usb-storage: Attempting to get CSW...
[ 625.532802] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 625.533790] usb-storage: Status code 0; transferred 13/13
[ 625.533796] usb-storage: -- transfer complete
[ 625.533801] usb-storage: Bulk status result = 0
[ 625.533806] usb-storage: Bulk Status S 0x53425355 T 0xbf5 R 0 Stat 0x0
[ 625.533813] usb-storage: scsi cmd done, result=0x0
[ 625.533820] usb-storage: *** thread sleeping.
[ 630.012649] usb-storage: queuecommand called
[ 630.012661] usb-storage: *** thread awakened.
[ 630.012667] usb-storage: Command WRITE_10 (10 bytes)
[ 630.012671] usb-storage: 2a 00 00 74 30 27 00 00 48 00
[ 630.012691] usb-storage: Bulk Command S 0x43425355 T 0xbf6 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 630.012697] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 630.013773] usb-storage: Status code 0; transferred 31/31
[ 630.013777] usb-storage: -- transfer complete
[ 630.013782] usb-storage: Bulk command transfer result=0
[ 630.013787] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 630.053804] usb-storage: Status code 0; transferred 36864/36864
[ 630.053809] usb-storage: -- transfer complete
[ 630.053814] usb-storage: Bulk data transfer result 0x0
[ 630.053817] usb-storage: Attempting to get CSW...
[ 630.053822] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 630.058778] usb-storage: Status code 0; transferred 13/13
[ 630.058784] usb-storage: -- transfer complete
[ 630.058788] usb-storage: Bulk status result = 0
[ 630.058793] usb-storage: Bulk Status S 0x53425355 T 0xbf6 R 0 Stat 0x0
[ 630.058798] usb-storage: scsi cmd done, result=0x0
[ 630.058806] usb-storage: *** thread sleeping.
[ 630.058899] usb-storage: queuecommand called
[ 630.058928] usb-storage: *** thread awakened.
[ 630.058934] usb-storage: Command WRITE_10 (10 bytes)
[ 630.058938] usb-storage: 2a 00 00 74 30 6f 00 00 08 00
[ 630.058956] usb-storage: Bulk Command S 0x43425355 T 0xbf7 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 630.058962] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 630.059784] usb-storage: Status code 0; transferred 31/31
[ 630.059788] usb-storage: -- transfer complete
[ 630.059792] usb-storage: Bulk command transfer result=0
[ 630.059798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 630.065804] usb-storage: Status code 0; transferred 4096/4096
[ 630.065810] usb-storage: -- transfer complete
[ 630.065814] usb-storage: Bulk data transfer result 0x0
[ 630.065818] usb-storage: Attempting to get CSW...
[ 630.065824] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 630.067787] usb-storage: Status code 0; transferred 13/13
[ 630.067791] usb-storage: -- transfer complete
[ 630.067797] usb-storage: Bulk status result = 0
[ 630.067802] usb-storage: Bulk Status S 0x53425355 T 0xbf7 R 0 Stat 0x0
[ 630.067808] usb-storage: scsi cmd done, result=0x0
[ 630.067816] usb-storage: *** thread sleeping.
[ 635.010041] usb-storage: queuecommand called
[ 635.010073] usb-storage: *** thread awakened.
[ 635.010081] usb-storage: Command WRITE_10 (10 bytes)
[ 635.010085] usb-storage: 2a 00 00 b8 ff 6f 00 00 60 00
[ 635.010105] usb-storage: Bulk Command S 0x43425355 T 0xbf8 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 635.010111] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.011775] usb-storage: Status code 0; transferred 31/31
[ 635.011779] usb-storage: -- transfer complete
[ 635.011784] usb-storage: Bulk command transfer result=0
[ 635.011789] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 635.223812] usb-storage: Status code 0; transferred 49152/49152
[ 635.223817] usb-storage: -- transfer complete
[ 635.223822] usb-storage: Bulk data transfer result 0x0
[ 635.223827] usb-storage: Attempting to get CSW...
[ 635.223832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.248781] usb-storage: Status code 0; transferred 13/13
[ 635.248787] usb-storage: -- transfer complete
[ 635.248791] usb-storage: Bulk status result = 0
[ 635.248797] usb-storage: Bulk Status S 0x53425355 T 0xbf8 R 0 Stat 0x0
[ 635.248803] usb-storage: scsi cmd done, result=0x0
[ 635.248810] usb-storage: *** thread sleeping.
[ 635.248863] usb-storage: queuecommand called
[ 635.248878] usb-storage: *** thread awakened.
[ 635.248884] usb-storage: Command WRITE_10 (10 bytes)
[ 635.248888] usb-storage: 2a 00 00 b9 25 a7 00 00 60 00
[ 635.248907] usb-storage: Bulk Command S 0x43425355 T 0xbf9 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 635.248913] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.249787] usb-storage: Status code 0; transferred 31/31
[ 635.249791] usb-storage: -- transfer complete
[ 635.249795] usb-storage: Bulk command transfer result=0
[ 635.249801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 635.388804] usb-storage: Status code 0; transferred 49152/49152
[ 635.388809] usb-storage: -- transfer complete
[ 635.388814] usb-storage: Bulk data transfer result 0x0
[ 635.388818] usb-storage: Attempting to get CSW...
[ 635.388823] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.390771] usb-storage: Status code 0; transferred 13/13
[ 635.390775] usb-storage: -- transfer complete
[ 635.390779] usb-storage: Bulk status result = 0
[ 635.390784] usb-storage: Bulk Status S 0x53425355 T 0xbf9 R 0 Stat 0x0
[ 635.390789] usb-storage: scsi cmd done, result=0x0
[ 635.390795] usb-storage: *** thread sleeping.
[ 635.390842] usb-storage: queuecommand called
[ 635.390858] usb-storage: *** thread awakened.
[ 635.390864] usb-storage: Command WRITE_10 (10 bytes)
[ 635.390867] usb-storage: 2a 00 00 74 30 77 00 00 10 00
[ 635.390886] usb-storage: Bulk Command S 0x43425355 T 0xbfa L 8192 F 0 Trg 0 LUN 0 CL 10
[ 635.390892] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.391794] usb-storage: Status code 0; transferred 31/31
[ 635.391799] usb-storage: -- transfer complete
[ 635.391803] usb-storage: Bulk command transfer result=0
[ 635.391809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 635.548797] usb-storage: Status code 0; transferred 8192/8192
[ 635.548801] usb-storage: -- transfer complete
[ 635.548805] usb-storage: Bulk data transfer result 0x0
[ 635.548809] usb-storage: Attempting to get CSW...
[ 635.548814] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.573780] usb-storage: Status code 0; transferred 13/13
[ 635.573784] usb-storage: -- transfer complete
[ 635.573788] usb-storage: Bulk status result = 0
[ 635.573793] usb-storage: Bulk Status S 0x53425355 T 0xbfa R 0 Stat 0x0
[ 635.573798] usb-storage: scsi cmd done, result=0x0
[ 635.573805] usb-storage: *** thread sleeping.
[ 635.573827] usb-storage: queuecommand called
[ 635.573837] usb-storage: *** thread awakened.
[ 635.573842] usb-storage: Command WRITE_10 (10 bytes)
[ 635.573846] usb-storage: 2a 00 00 74 30 97 00 00 38 00
[ 635.573865] usb-storage: Bulk Command S 0x43425355 T 0xbfb L 28672 F 0 Trg 0 LUN 0 CL 10
[ 635.573870] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.574792] usb-storage: Status code 0; transferred 31/31
[ 635.574797] usb-storage: -- transfer complete
[ 635.574801] usb-storage: Bulk command transfer result=0
[ 635.574807] usb-storage: usb_stor_bulk_transfer_sglist: xfer 28672 bytes, 7 entries
[ 635.612803] usb-storage: Status code 0; transferred 28672/28672
[ 635.612808] usb-storage: -- transfer complete
[ 635.612812] usb-storage: Bulk data transfer result 0x0
[ 635.612816] usb-storage: Attempting to get CSW...
[ 635.612821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.616779] usb-storage: Status code 0; transferred 13/13
[ 635.616783] usb-storage: -- transfer complete
[ 635.616787] usb-storage: Bulk status result = 0
[ 635.616792] usb-storage: Bulk Status S 0x53425355 T 0xbfb R 0 Stat 0x0
[ 635.616797] usb-storage: scsi cmd done, result=0x0
[ 635.616803] usb-storage: *** thread sleeping.
[ 635.616883] usb-storage: queuecommand called
[ 635.616894] usb-storage: *** thread awakened.
[ 635.616900] usb-storage: Command WRITE_10 (10 bytes)
[ 635.616903] usb-storage: 2a 00 00 74 30 cf 00 00 08 00
[ 635.616922] usb-storage: Bulk Command S 0x43425355 T 0xbfc L 4096 F 0 Trg 0 LUN 0 CL 10
[ 635.616928] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.618378] usb-storage: Status code 0; transferred 31/31
[ 635.618383] usb-storage: -- transfer complete
[ 635.618387] usb-storage: Bulk command transfer result=0
[ 635.618393] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 635.623811] usb-storage: Status code 0; transferred 4096/4096
[ 635.623816] usb-storage: -- transfer complete
[ 635.623821] usb-storage: Bulk data transfer result 0x0
[ 635.623825] usb-storage: Attempting to get CSW...
[ 635.623831] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.625787] usb-storage: Status code 0; transferred 13/13
[ 635.625792] usb-storage: -- transfer complete
[ 635.625796] usb-storage: Bulk status result = 0
[ 635.625801] usb-storage: Bulk Status S 0x53425355 T 0xbfc R 0 Stat 0x0
[ 635.625808] usb-storage: scsi cmd done, result=0x0
[ 635.625815] usb-storage: *** thread sleeping.
[ 640.676220] usb-storage: queuecommand called
[ 640.676240] usb-storage: *** thread awakened.
[ 640.676247] usb-storage: Command WRITE_10 (10 bytes)
[ 640.676251] usb-storage: 2a 00 00 74 30 d7 00 00 68 00
[ 640.676271] usb-storage: Bulk Command S 0x43425355 T 0xbfd L 53248 F 0 Trg 0 LUN 0 CL 10
[ 640.676278] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 640.677810] usb-storage: Status code 0; transferred 31/31
[ 640.677815] usb-storage: -- transfer complete
[ 640.677819] usb-storage: Bulk command transfer result=0
[ 640.677825] usb-storage: usb_stor_bulk_transfer_sglist: xfer 53248 bytes, 13 entries
[ 640.764816] usb-storage: Status code 0; transferred 53248/53248
[ 640.764822] usb-storage: -- transfer complete
[ 640.764826] usb-storage: Bulk data transfer result 0x0
[ 640.764831] usb-storage: Attempting to get CSW...
[ 640.764836] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 640.768794] usb-storage: Status code 0; transferred 13/13
[ 640.768799] usb-storage: -- transfer complete
[ 640.768804] usb-storage: Bulk status result = 0
[ 640.768810] usb-storage: Bulk Status S 0x53425355 T 0xbfd R 0 Stat 0x0
[ 640.768816] usb-storage: scsi cmd done, result=0x0
[ 640.768825] usb-storage: *** thread sleeping.
[ 640.768871] usb-storage: queuecommand called
[ 640.768886] usb-storage: *** thread awakened.
[ 640.768892] usb-storage: Command READ_10 (10 bytes)
[ 640.768896] usb-storage: 28 00 00 0c c0 af 00 00 20 00
[ 640.768916] usb-storage: Bulk Command S 0x43425355 T 0xbfe L 16384 F 128 Trg 0 LUN 0 CL 10
[ 640.768922] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 640.769789] usb-storage: Status code 0; transferred 31/31
[ 640.769793] usb-storage: -- transfer complete
[ 640.769797] usb-storage: Bulk command transfer result=0
[ 640.769803] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
[ 640.913815] usb-storage: Status code 0; transferred 16384/16384
[ 640.913820] usb-storage: -- transfer complete
[ 640.913824] usb-storage: Bulk data transfer result 0x0
[ 640.913828] usb-storage: Attempting to get CSW...
[ 640.913832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 640.914772] usb-storage: Status code 0; transferred 13/13
[ 640.914777] usb-storage: -- transfer complete
[ 640.914781] usb-storage: Bulk status result = 0
[ 640.914786] usb-storage: Bulk Status S 0x53425355 T 0xbfe R 0 Stat 0x0
[ 640.914791] usb-storage: scsi cmd done, result=0x0
[ 640.914799] usb-storage: *** thread sleeping.
[ 640.914827] usb-storage: queuecommand called
[ 640.914843] usb-storage: *** thread awakened.
[ 640.914848] usb-storage: Command WRITE_10 (10 bytes)
[ 640.914852] usb-storage: 2a 00 00 b9 24 ef 00 00 08 00
[ 640.914871] usb-storage: Bulk Command S 0x43425355 T 0xbff L 4096 F 0 Trg 0 LUN 0 CL 10
[ 640.914877] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 640.915794] usb-storage: Status code 0; transferred 31/31
[ 640.915799] usb-storage: -- transfer complete
[ 640.915803] usb-storage: Bulk command transfer result=0
[ 640.915808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 640.929810] usb-storage: Status code 0; transferred 4096/4096
[ 640.929815] usb-storage: -- transfer complete
[ 640.929820] usb-storage: Bulk data transfer result 0x0
[ 640.929824] usb-storage: Attempting to get CSW...
[ 640.929829] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 640.954773] usb-storage: Status code 0; transferred 13/13
[ 640.954777] usb-storage: -- transfer complete
[ 640.954782] usb-storage: Bulk status result = 0
[ 640.954787] usb-storage: Bulk Status S 0x53425355 T 0xbff R 0 Stat 0x0
[ 640.954793] usb-storage: scsi cmd done, result=0x0
[ 640.954800] usb-storage: *** thread sleeping.
[ 640.954827] usb-storage: queuecommand called
[ 640.954842] usb-storage: *** thread awakened.
[ 640.954848] usb-storage: Command WRITE_10 (10 bytes)
[ 640.954852] usb-storage: 2a 00 00 74 31 3f 00 00 08 00
[ 640.954870] usb-storage: Bulk Command S 0x43425355 T 0xc00 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 640.954876] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 640.955774] usb-storage: Status code 0; transferred 31/31
[ 640.955778] usb-storage: -- transfer complete
[ 640.955782] usb-storage: Bulk command transfer result=0
[ 640.955787] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.163803] usb-storage: Status code 0; transferred 4096/4096
[ 641.163808] usb-storage: -- transfer complete
[ 641.163812] usb-storage: Bulk data transfer result 0x0
[ 641.163816] usb-storage: Attempting to get CSW...
[ 641.163820] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.164780] usb-storage: Status code 0; transferred 13/13
[ 641.164784] usb-storage: -- transfer complete
[ 641.164788] usb-storage: Bulk status result = 0
[ 641.164793] usb-storage: Bulk Status S 0x53425355 T 0xc00 R 0 Stat 0x0
[ 641.164798] usb-storage: scsi cmd done, result=0x0
[ 641.164805] usb-storage: *** thread sleeping.
[ 641.164827] usb-storage: queuecommand called
[ 641.164837] usb-storage: *** thread awakened.
[ 641.164841] usb-storage: Command READ_10 (10 bytes)
[ 641.164845] usb-storage: 28 00 00 0c c1 0f 00 00 08 00
[ 641.164864] usb-storage: Bulk Command S 0x43425355 T 0xc01 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.164870] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.165777] usb-storage: Status code 0; transferred 31/31
[ 641.165781] usb-storage: -- transfer complete
[ 641.165785] usb-storage: Bulk command transfer result=0
[ 641.165790] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.169798] usb-storage: Status code 0; transferred 4096/4096
[ 641.169803] usb-storage: -- transfer complete
[ 641.169807] usb-storage: Bulk data transfer result 0x0
[ 641.169810] usb-storage: Attempting to get CSW...
[ 641.169815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.170769] usb-storage: Status code 0; transferred 13/13
[ 641.170773] usb-storage: -- transfer complete
[ 641.170777] usb-storage: Bulk status result = 0
[ 641.170783] usb-storage: Bulk Status S 0x53425355 T 0xc01 R 0 Stat 0x0
[ 641.170788] usb-storage: scsi cmd done, result=0x0
[ 641.170794] usb-storage: *** thread sleeping.
[ 641.170813] usb-storage: queuecommand called
[ 641.170822] usb-storage: *** thread awakened.
[ 641.170827] usb-storage: Command WRITE_10 (10 bytes)
[ 641.170830] usb-storage: 2a 00 00 74 31 47 00 00 10 00
[ 641.170849] usb-storage: Bulk Command S 0x43425355 T 0xc02 L 8192 F 0 Trg 0 LUN 0 CL 10
[ 641.170854] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.171787] usb-storage: Status code 0; transferred 31/31
[ 641.171792] usb-storage: -- transfer complete
[ 641.171797] usb-storage: Bulk command transfer result=0
[ 641.171804] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 641.180816] usb-storage: Status code 0; transferred 8192/8192
[ 641.180820] usb-storage: -- transfer complete
[ 641.180824] usb-storage: Bulk data transfer result 0x0
[ 641.180828] usb-storage: Attempting to get CSW...
[ 641.180833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.181772] usb-storage: Status code 0; transferred 13/13
[ 641.181776] usb-storage: -- transfer complete
[ 641.181780] usb-storage: Bulk status result = 0
[ 641.181786] usb-storage: Bulk Status S 0x53425355 T 0xc02 R 0 Stat 0x0
[ 641.181791] usb-storage: scsi cmd done, result=0x0
[ 641.181797] usb-storage: *** thread sleeping.
[ 641.181817] usb-storage: queuecommand called
[ 641.181826] usb-storage: *** thread awakened.
[ 641.181832] usb-storage: Command READ_10 (10 bytes)
[ 641.181835] usb-storage: 28 00 00 0c c3 9f 00 00 88 00
[ 641.181854] usb-storage: Bulk Command S 0x43425355 T 0xc03 L 69632 F 128 Trg 0 LUN 0 CL 10
[ 641.181860] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.182771] usb-storage: Status code 0; transferred 31/31
[ 641.182776] usb-storage: -- transfer complete
[ 641.182780] usb-storage: Bulk command transfer result=0
[ 641.182785] usb-storage: usb_stor_bulk_transfer_sglist: xfer 69632 bytes, 17 entries
[ 641.247830] usb-storage: Status code 0; transferred 69632/69632
[ 641.247835] usb-storage: -- transfer complete
[ 641.247839] usb-storage: Bulk data transfer result 0x0
[ 641.247842] usb-storage: Attempting to get CSW...
[ 641.247847] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.248786] usb-storage: Status code 0; transferred 13/13
[ 641.248790] usb-storage: -- transfer complete
[ 641.248794] usb-storage: Bulk status result = 0
[ 641.248800] usb-storage: Bulk Status S 0x53425355 T 0xc03 R 0 Stat 0x0
[ 641.248805] usb-storage: scsi cmd done, result=0x0
[ 641.248811] usb-storage: *** thread sleeping.
[ 641.248839] usb-storage: queuecommand called
[ 641.248849] usb-storage: *** thread awakened.
[ 641.248854] usb-storage: Command WRITE_10 (10 bytes)
[ 641.248858] usb-storage: 2a 00 00 74 31 57 00 00 08 00
[ 641.248876] usb-storage: Bulk Command S 0x43425355 T 0xc04 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 641.248882] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.249784] usb-storage: Status code 0; transferred 31/31
[ 641.249788] usb-storage: -- transfer complete
[ 641.249792] usb-storage: Bulk command transfer result=0
[ 641.249798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.254784] usb-storage: Status code 0; transferred 4096/4096
[ 641.254788] usb-storage: -- transfer complete
[ 641.254792] usb-storage: Bulk data transfer result 0x0
[ 641.254796] usb-storage: Attempting to get CSW...
[ 641.254801] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.255789] usb-storage: Status code 0; transferred 13/13
[ 641.255796] usb-storage: -- transfer complete
[ 641.255801] usb-storage: Bulk status result = 0
[ 641.255808] usb-storage: Bulk Status S 0x53425355 T 0xc04 R 0 Stat 0x0
[ 641.255815] usb-storage: scsi cmd done, result=0x0
[ 641.255824] usb-storage: *** thread sleeping.
[ 641.255853] usb-storage: queuecommand called
[ 641.255868] usb-storage: *** thread awakened.
[ 641.255875] usb-storage: Command READ_10 (10 bytes)
[ 641.255879] usb-storage: 28 00 00 0c c0 cf 00 00 40 00
[ 641.255902] usb-storage: Bulk Command S 0x43425355 T 0xc05 L 32768 F 128 Trg 0 LUN 0 CL 10
[ 641.255910] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.256807] usb-storage: Status code 0; transferred 31/31
[ 641.256813] usb-storage: -- transfer complete
[ 641.256819] usb-storage: Bulk command transfer result=0
[ 641.256826] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 641.287806] usb-storage: Status code 0; transferred 32768/32768
[ 641.287811] usb-storage: -- transfer complete
[ 641.287815] usb-storage: Bulk data transfer result 0x0
[ 641.287819] usb-storage: Attempting to get CSW...
[ 641.287824] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.288782] usb-storage: Status code 0; transferred 13/13
[ 641.288788] usb-storage: -- transfer complete
[ 641.288792] usb-storage: Bulk status result = 0
[ 641.288798] usb-storage: Bulk Status S 0x53425355 T 0xc05 R 0 Stat 0x0
[ 641.288803] usb-storage: scsi cmd done, result=0x0
[ 641.288810] usb-storage: *** thread sleeping.
[ 641.288843] usb-storage: queuecommand called
[ 641.288853] usb-storage: *** thread awakened.
[ 641.288859] usb-storage: Command READ_10 (10 bytes)
[ 641.288862] usb-storage: 28 00 00 0c c1 17 00 00 a0 00
[ 641.288881] usb-storage: Bulk Command S 0x43425355 T 0xc06 L 81920 F 128 Trg 0 LUN 0 CL 10
[ 641.288887] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.289782] usb-storage: Status code 0; transferred 31/31
[ 641.289787] usb-storage: -- transfer complete
[ 641.289791] usb-storage: Bulk command transfer result=0
[ 641.289796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 81920 bytes, 20 entries
[ 641.366820] usb-storage: Status code 0; transferred 81920/81920
[ 641.366826] usb-storage: -- transfer complete
[ 641.366831] usb-storage: Bulk data transfer result 0x0
[ 641.366835] usb-storage: Attempting to get CSW...
[ 641.366840] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.367779] usb-storage: Status code 0; transferred 13/13
[ 641.367784] usb-storage: -- transfer complete
[ 641.367788] usb-storage: Bulk status result = 0
[ 641.367793] usb-storage: Bulk Status S 0x53425355 T 0xc06 R 0 Stat 0x0
[ 641.367798] usb-storage: scsi cmd done, result=0x0
[ 641.367805] usb-storage: *** thread sleeping.
[ 641.367839] usb-storage: queuecommand called
[ 641.367856] usb-storage: *** thread awakened.
[ 641.367862] usb-storage: Command READ_10 (10 bytes)
[ 641.367865] usb-storage: 28 00 00 0c c1 b7 00 00 f0 00
[ 641.367884] usb-storage: Bulk Command S 0x43425355 T 0xc07 L 122880 F 128 Trg 0 LUN 0 CL 10
[ 641.367890] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.368788] usb-storage: Status code 0; transferred 31/31
[ 641.368792] usb-storage: -- transfer complete
[ 641.368796] usb-storage: Bulk command transfer result=0
[ 641.368802] usb-storage: usb_stor_bulk_transfer_sglist: xfer 122880 bytes, 30 entries
[ 641.483799] usb-storage: Status code 0; transferred 122880/122880
[ 641.483801] usb-storage: -- transfer complete
[ 641.483804] usb-storage: Bulk data transfer result 0x0
[ 641.483806] usb-storage: Attempting to get CSW...
[ 641.483808] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.484771] usb-storage: Status code 0; transferred 13/13
[ 641.484773] usb-storage: -- transfer complete
[ 641.484775] usb-storage: Bulk status result = 0
[ 641.484778] usb-storage: Bulk Status S 0x53425355 T 0xc07 R 0 Stat 0x0
[ 641.484781] usb-storage: scsi cmd done, result=0x0
[ 641.484784] usb-storage: *** thread sleeping.
[ 641.484805] usb-storage: queuecommand called
[ 641.484815] usb-storage: *** thread awakened.
[ 641.484818] usb-storage: Command READ_10 (10 bytes)
[ 641.484820] usb-storage: 28 00 00 0c c2 a7 00 00 10 00
[ 641.484829] usb-storage: Bulk Command S 0x43425355 T 0xc08 L 8192 F 128 Trg 0 LUN 0 CL 10
[ 641.484832] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.485778] usb-storage: Status code 0; transferred 31/31
[ 641.485780] usb-storage: -- transfer complete
[ 641.485782] usb-storage: Bulk command transfer result=0
[ 641.485785] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 641.493807] usb-storage: Status code 0; transferred 8192/8192
[ 641.493813] usb-storage: -- transfer complete
[ 641.493817] usb-storage: Bulk data transfer result 0x0
[ 641.493820] usb-storage: Attempting to get CSW...
[ 641.493826] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.494787] usb-storage: Status code 0; transferred 13/13
[ 641.494792] usb-storage: -- transfer complete
[ 641.494796] usb-storage: Bulk status result = 0
[ 641.494801] usb-storage: Bulk Status S 0x53425355 T 0xc08 R 0 Stat 0x0
[ 641.494807] usb-storage: scsi cmd done, result=0x0
[ 641.494814] usb-storage: *** thread sleeping.
[ 641.494834] usb-storage: queuecommand called
[ 641.494844] usb-storage: *** thread awakened.
[ 641.494849] usb-storage: Command READ_10 (10 bytes)
[ 641.494852] usb-storage: 28 00 00 0c c2 ef 00 00 b0 00
[ 641.494871] usb-storage: Bulk Command S 0x43425355 T 0xc09 L 90112 F 128 Trg 0 LUN 0 CL 10
[ 641.494878] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.495787] usb-storage: Status code 0; transferred 31/31
[ 641.495793] usb-storage: -- transfer complete
[ 641.495797] usb-storage: Bulk command transfer result=0
[ 641.495802] usb-storage: usb_stor_bulk_transfer_sglist: xfer 90112 bytes, 14 entries
[ 641.579789] usb-storage: Status code 0; transferred 90112/90112
[ 641.579791] usb-storage: -- transfer complete
[ 641.579794] usb-storage: Bulk data transfer result 0x0
[ 641.579795] usb-storage: Attempting to get CSW...
[ 641.579798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.580778] usb-storage: Status code 0; transferred 13/13
[ 641.580780] usb-storage: -- transfer complete
[ 641.580782] usb-storage: Bulk status result = 0
[ 641.580785] usb-storage: Bulk Status S 0x53425355 T 0xc09 R 0 Stat 0x0
[ 641.580788] usb-storage: scsi cmd done, result=0x0
[ 641.580792] usb-storage: *** thread sleeping.
[ 641.581035] usb-storage: queuecommand called
[ 641.581057] usb-storage: *** thread awakened.
[ 641.581060] usb-storage: Command READ_10 (10 bytes)
[ 641.581061] usb-storage: 28 00 00 0c c2 b7 00 00 38 00
[ 641.581071] usb-storage: Bulk Command S 0x43425355 T 0xc0a L 28672 F 128 Trg 0 LUN 0 CL 10
[ 641.581074] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.581769] usb-storage: Status code 0; transferred 31/31
[ 641.581771] usb-storage: -- transfer complete
[ 641.581773] usb-storage: Bulk command transfer result=0
[ 641.581775] usb-storage: usb_stor_bulk_transfer_sglist: xfer 28672 bytes, 5 entries
[ 641.608800] usb-storage: Status code 0; transferred 28672/28672
[ 641.608804] usb-storage: -- transfer complete
[ 641.608809] usb-storage: Bulk data transfer result 0x0
[ 641.608813] usb-storage: Attempting to get CSW...
[ 641.608818] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.609775] usb-storage: Status code 0; transferred 13/13
[ 641.609780] usb-storage: -- transfer complete
[ 641.609785] usb-storage: Bulk status result = 0
[ 641.609790] usb-storage: Bulk Status S 0x53425355 T 0xc0a R 0 Stat 0x0
[ 641.609796] usb-storage: scsi cmd done, result=0x0
[ 641.609803] usb-storage: *** thread sleeping.
[ 641.612554] usb-storage: queuecommand called
[ 641.612573] usb-storage: *** thread awakened.
[ 641.612579] usb-storage: Command READ_10 (10 bytes)
[ 641.612585] usb-storage: 28 00 00 28 c1 ff 00 00 08 00
[ 641.612605] usb-storage: Bulk Command S 0x43425355 T 0xc0b L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.612614] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.613121] usb-storage: Status code 0; transferred 31/31
[ 641.613128] usb-storage: -- transfer complete
[ 641.613132] usb-storage: Bulk command transfer result=0
[ 641.613138] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.812805] usb-storage: Status code 0; transferred 4096/4096
[ 641.812810] usb-storage: -- transfer complete
[ 641.812814] usb-storage: Bulk data transfer result 0x0
[ 641.812818] usb-storage: Attempting to get CSW...
[ 641.812823] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.813782] usb-storage: Status code 0; transferred 13/13
[ 641.813787] usb-storage: -- transfer complete
[ 641.813791] usb-storage: Bulk status result = 0
[ 641.813797] usb-storage: Bulk Status S 0x53425355 T 0xc0b R 0 Stat 0x0
[ 641.813802] usb-storage: scsi cmd done, result=0x0
[ 641.813809] usb-storage: *** thread sleeping.
[ 641.813923] usb-storage: queuecommand called
[ 641.813952] usb-storage: *** thread awakened.
[ 641.813958] usb-storage: Command READ_10 (10 bytes)
[ 641.813961] usb-storage: 28 00 00 28 c2 2f 00 00 08 00
[ 641.813980] usb-storage: Bulk Command S 0x43425355 T 0xc0c L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.813986] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.814790] usb-storage: Status code 0; transferred 31/31
[ 641.814794] usb-storage: -- transfer complete
[ 641.814798] usb-storage: Bulk command transfer result=0
[ 641.814804] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.818785] usb-storage: Status code 0; transferred 4096/4096
[ 641.818789] usb-storage: -- transfer complete
[ 641.818793] usb-storage: Bulk data transfer result 0x0
[ 641.818797] usb-storage: Attempting to get CSW...
[ 641.818801] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.819786] usb-storage: Status code 0; transferred 13/13
[ 641.819790] usb-storage: -- transfer complete
[ 641.819794] usb-storage: Bulk status result = 0
[ 641.819799] usb-storage: Bulk Status S 0x53425355 T 0xc0c R 0 Stat 0x0
[ 641.819804] usb-storage: scsi cmd done, result=0x0
[ 641.819811] usb-storage: *** thread sleeping.
[ 641.820136] usb-storage: queuecommand called
[ 641.820148] usb-storage: *** thread awakened.
[ 641.820154] usb-storage: Command READ_10 (10 bytes)
[ 641.820158] usb-storage: 28 00 00 b4 c8 77 00 00 08 00
[ 641.820178] usb-storage: Bulk Command S 0x43425355 T 0xc0d L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.820186] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.820781] usb-storage: Status code 0; transferred 31/31
[ 641.820785] usb-storage: -- transfer complete
[ 641.820790] usb-storage: Bulk command transfer result=0
[ 641.820796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.825802] usb-storage: Status code 0; transferred 4096/4096
[ 641.825807] usb-storage: -- transfer complete
[ 641.825812] usb-storage: Bulk data transfer result 0x0
[ 641.825816] usb-storage: Attempting to get CSW...
[ 641.825821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.826789] usb-storage: Status code 0; transferred 13/13
[ 641.826794] usb-storage: -- transfer complete
[ 641.826798] usb-storage: Bulk status result = 0
[ 641.826804] usb-storage: Bulk Status S 0x53425355 T 0xc0d R 0 Stat 0x0
[ 641.826810] usb-storage: scsi cmd done, result=0x0
[ 641.826817] usb-storage: *** thread sleeping.
[ 641.827377] usb-storage: queuecommand called
[ 641.827393] usb-storage: *** thread awakened.
[ 641.827399] usb-storage: Command READ_10 (10 bytes)
[ 641.827403] usb-storage: 28 00 00 0c c4 27 00 00 18 00
[ 641.827423] usb-storage: Bulk Command S 0x43425355 T 0xc0e L 12288 F 128 Trg 0 LUN 0 CL 10
[ 641.827431] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.827793] usb-storage: Status code 0; transferred 31/31
[ 641.827797] usb-storage: -- transfer complete
[ 641.827802] usb-storage: Bulk command transfer result=0
[ 641.827808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 641.839786] usb-storage: Status code 0; transferred 12288/12288
[ 641.839790] usb-storage: -- transfer complete
[ 641.839792] usb-storage: Bulk data transfer result 0x0
[ 641.839794] usb-storage: Attempting to get CSW...
[ 641.839797] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.840775] usb-storage: Status code 0; transferred 13/13
[ 641.840778] usb-storage: -- transfer complete
[ 641.840780] usb-storage: Bulk status result = 0
[ 641.840783] usb-storage: Bulk Status S 0x53425355 T 0xc0e R 0 Stat 0x0
[ 641.840786] usb-storage: scsi cmd done, result=0x0
[ 641.840791] usb-storage: *** thread sleeping.
[ 641.845783] usb-storage: queuecommand called
[ 641.845801] usb-storage: *** thread awakened.
[ 641.845805] usb-storage: Command READ_10 (10 bytes)
[ 641.845807] usb-storage: 28 00 00 28 c2 07 00 00 08 00
[ 641.845818] usb-storage: Bulk Command S 0x43425355 T 0xc0f L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.845821] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.846783] usb-storage: Status code 0; transferred 31/31
[ 641.846785] usb-storage: -- transfer complete
[ 641.846788] usb-storage: Bulk command transfer result=0
[ 641.846791] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.850770] usb-storage: Status code 0; transferred 4096/4096
[ 641.850772] usb-storage: -- transfer complete
[ 641.850774] usb-storage: Bulk data transfer result 0x0
[ 641.850776] usb-storage: Attempting to get CSW...
[ 641.850779] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.851769] usb-storage: Status code 0; transferred 13/13
[ 641.851772] usb-storage: -- transfer complete
[ 641.851774] usb-storage: Bulk status result = 0
[ 641.851776] usb-storage: Bulk Status S 0x53425355 T 0xc0f R 0 Stat 0x0
[ 641.851779] usb-storage: scsi cmd done, result=0x0
[ 641.851784] usb-storage: *** thread sleeping.
[ 641.852429] usb-storage: queuecommand called
[ 641.852438] usb-storage: *** thread awakened.
[ 641.852441] usb-storage: Command READ_10 (10 bytes)
[ 641.852443] usb-storage: 28 00 00 28 c2 0f 00 00 08 00
[ 641.852453] usb-storage: Bulk Command S 0x43425355 T 0xc10 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.852457] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.852768] usb-storage: Status code 0; transferred 31/31
[ 641.852770] usb-storage: -- transfer complete
[ 641.852772] usb-storage: Bulk command transfer result=0
[ 641.852775] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.856776] usb-storage: Status code 0; transferred 4096/4096
[ 641.856778] usb-storage: -- transfer complete
[ 641.856780] usb-storage: Bulk data transfer result 0x0
[ 641.856782] usb-storage: Attempting to get CSW...
[ 641.856785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.857756] usb-storage: Status code 0; transferred 13/13
[ 641.857758] usb-storage: -- transfer complete
[ 641.857760] usb-storage: Bulk status result = 0
[ 641.857763] usb-storage: Bulk Status S 0x53425355 T 0xc10 R 0 Stat 0x0
[ 641.857765] usb-storage: scsi cmd done, result=0x0
[ 641.857769] usb-storage: *** thread sleeping.
[ 642.869920] usb-storage: queuecommand called
[ 642.869964] usb-storage: *** thread awakened.
[ 642.869973] usb-storage: Command READ_10 (10 bytes)
[ 642.869977] usb-storage: 28 00 00 28 c2 17 00 00 08 00
[ 642.869998] usb-storage: Bulk Command S 0x43425355 T 0xc11 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 642.870049] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 642.871801] usb-storage: Status code 0; transferred 31/31
[ 642.871805] usb-storage: -- transfer complete
[ 642.871810] usb-storage: Bulk command transfer result=0
[ 642.871816] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 642.875788] usb-storage: Status code 0; transferred 4096/4096
[ 642.875793] usb-storage: -- transfer complete
[ 642.875798] usb-storage: Bulk data transfer result 0x0
[ 642.875801] usb-storage: Attempting to get CSW...
[ 642.875806] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 642.876787] usb-storage: Status code 0; transferred 13/13
[ 642.876791] usb-storage: -- transfer complete
[ 642.876795] usb-storage: Bulk status result = 0
[ 642.876801] usb-storage: Bulk Status S 0x53425355 T 0xc11 R 0 Stat 0x0
[ 642.876806] usb-storage: scsi cmd done, result=0x0
[ 642.876814] usb-storage: *** thread sleeping.
[ 642.878065] usb-storage: queuecommand called
[ 642.878083] usb-storage: *** thread awakened.
[ 642.878089] usb-storage: Command READ_10 (10 bytes)
[ 642.878093] usb-storage: 28 00 00 28 c2 1f 00 00 08 00
[ 642.878112] usb-storage: Bulk Command S 0x43425355 T 0xc12 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 642.878119] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 642.878774] usb-storage: Status code 0; transferred 31/31
[ 642.878779] usb-storage: -- transfer complete
[ 642.878783] usb-storage: Bulk command transfer result=0
[ 642.878789] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 642.882803] usb-storage: Status code 0; transferred 4096/4096
[ 642.882809] usb-storage: -- transfer complete
[ 642.882815] usb-storage: Bulk data transfer result 0x0
[ 642.882820] usb-storage: Attempting to get CSW...
[ 642.882826] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 642.883785] usb-storage: Status code 0; transferred 13/13
[ 642.883790] usb-storage: -- transfer complete
[ 642.883795] usb-storage: Bulk status result = 0
[ 642.883801] usb-storage: Bulk Status S 0x53425355 T 0xc12 R 0 Stat 0x0
[ 642.883808] usb-storage: scsi cmd done, result=0x0
[ 642.883816] usb-storage: *** thread sleeping.
[ 642.888343] usb-storage: queuecommand called
[ 642.888716] usb-storage: *** thread awakened.
[ 642.888723] usb-storage: Command READ_10 (10 bytes)
[ 642.888727] usb-storage: 28 00 00 28 c4 17 00 00 08 00
[ 642.888747] usb-storage: Bulk Command S 0x43425355 T 0xc13 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 642.888753] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 642.889779] usb-storage: Status code 0; transferred 31/31
[ 642.889784] usb-storage: -- transfer complete
[ 642.889788] usb-storage: Bulk command transfer result=0
[ 642.889794] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 642.893802] usb-storage: Status code 0; transferred 4096/4096
[ 642.893807] usb-storage: -- transfer complete
[ 642.893812] usb-storage: Bulk data transfer result 0x0
[ 642.893816] usb-storage: Attempting to get CSW...
[ 642.893821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 642.894787] usb-storage: Status code 0; transferred 13/13
[ 642.894791] usb-storage: -- transfer complete
[ 642.894795] usb-storage: Bulk status result = 0
[ 642.894801] usb-storage: Bulk Status S 0x53425355 T 0xc13 R 0 Stat 0x0
[ 642.894806] usb-storage: scsi cmd done, result=0x0
[ 642.894814] usb-storage: *** thread sleeping.
[ 642.895913] usb-storage: queuecommand called
[ 642.895928] usb-storage: *** thread awakened.
[ 642.895933] usb-storage: Command READ_10 (10 bytes)
[ 642.895937] usb-storage: 28 00 00 28 c2 27 00 00 08 00
[ 642.895956] usb-storage: Bulk Command S 0x43425355 T 0xc14 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 642.895963] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 642.896787] usb-storage: Status code 0; transferred 31/31
[ 642.896791] usb-storage: -- transfer complete
[ 642.896796] usb-storage: Bulk command transfer result=0
[ 642.896801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 642.900787] usb-storage: Status code 0; transferred 4096/4096
[ 642.900791] usb-storage: -- transfer complete
[ 642.900795] usb-storage: Bulk data transfer result 0x0
[ 642.900799] usb-storage: Attempting to get CSW...
[ 642.900803] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 642.901773] usb-storage: Status code 0; transferred 13/13
[ 642.901778] usb-storage: -- transfer complete
[ 642.901783] usb-storage: Bulk status result = 0
[ 642.901788] usb-storage: Bulk Status S 0x53425355 T 0xc14 R 0 Stat 0x0
[ 642.901794] usb-storage: scsi cmd done, result=0x0
[ 642.901801] usb-storage: *** thread sleeping.
[ 645.000143] usb-storage: queuecommand called
[ 645.000182] usb-storage: *** thread awakened.
[ 645.000189] usb-storage: Command WRITE_10 (10 bytes)
[ 645.000193] usb-storage: 2a 00 00 c4 0f 5f 00 00 10 00
[ 645.000213] usb-storage: Bulk Command S 0x43425355 T 0xc15 L 8192 F 0 Trg 0 LUN 0 CL 10
[ 645.000220] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 645.001790] usb-storage: Status code 0; transferred 31/31
[ 645.001795] usb-storage: -- transfer complete
[ 645.001800] usb-storage: Bulk command transfer result=0
[ 645.001806] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 645.178814] usb-storage: Status code 0; transferred 8192/8192
[ 645.178819] usb-storage: -- transfer complete
[ 645.178823] usb-storage: Bulk data transfer result 0x0
[ 645.178827] usb-storage: Attempting to get CSW...
[ 645.178833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 645.180774] usb-storage: Status code 0; transferred 13/13
[ 645.180778] usb-storage: -- transfer complete
[ 645.180782] usb-storage: Bulk status result = 0
[ 645.180787] usb-storage: Bulk Status S 0x53425355 T 0xc15 R 0 Stat 0x0
[ 645.180793] usb-storage: scsi cmd done, result=0x0
[ 645.180800] usb-storage: *** thread sleeping.
[ 645.180836] usb-storage: queuecommand called
[ 645.180851] usb-storage: *** thread awakened.
[ 645.180857] usb-storage: Command WRITE_10 (10 bytes)
[ 645.180861] usb-storage: 2a 00 00 c4 0f e7 00 00 08 00
[ 645.180880] usb-storage: Bulk Command S 0x43425355 T 0xc16 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 645.180886] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 645.181793] usb-storage: Status code 0; transferred 31/31
[ 645.181797] usb-storage: -- transfer complete
[ 645.181801] usb-storage: Bulk command transfer result=0
[ 645.181806] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 645.213789] usb-storage: Status code 0; transferred 4096/4096
[ 645.213791] usb-storage: -- transfer complete
[ 645.213794] usb-storage: Bulk data transfer result 0x0
[ 645.213796] usb-storage: Attempting to get CSW...
[ 645.213798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 645.217769] usb-storage: Status code 0; transferred 13/13
[ 645.217771] usb-storage: -- transfer complete
[ 645.217773] usb-storage: Bulk status result = 0
[ 645.217776] usb-storage: Bulk Status S 0x53425355 T 0xc16 R 0 Stat 0x0
[ 645.217779] usb-storage: scsi cmd done, result=0x0
[ 645.217783] usb-storage: *** thread sleeping.
[ 645.217799] usb-storage: queuecommand called
[ 645.217807] usb-storage: *** thread awakened.
[ 645.217810] usb-storage: Command WRITE_10 (10 bytes)
[ 645.217812] usb-storage: 2a 00 00 c5 80 3f 00 00 08 00
[ 645.217821] usb-storage: Bulk Command S 0x43425355 T 0xc17 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 645.217824] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 645.218766] usb-storage: Status code 0; transferred 31/31
[ 645.218768] usb-storage: -- transfer complete
[ 645.218770] usb-storage: Bulk command transfer result=0
[ 645.218773] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 645.223794] usb-storage: Status code 0; transferred 4096/4096
[ 645.223799] usb-storage: -- transfer complete
[ 645.223803] usb-storage: Bulk data transfer result 0x0
[ 645.223807] usb-storage: Attempting to get CSW...
[ 645.223812] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 645.224775] usb-storage: Status code 0; transferred 13/13
[ 645.224780] usb-storage: -- transfer complete
[ 645.224784] usb-storage: Bulk status result = 0
[ 645.224790] usb-storage: Bulk Status S 0x53425355 T 0xc17 R 0 Stat 0x0
[ 645.224795] usb-storage: scsi cmd done, result=0x0
[ 645.224802] usb-storage: *** thread sleeping.
[ 645.224826] usb-storage: queuecommand called
[ 645.224837] usb-storage: *** thread awakened.
[ 645.224842] usb-storage: Command WRITE_10 (10 bytes)
[ 645.224846] usb-storage: 2a 00 00 b4 01 07 00 00 08 00
[ 645.224864] usb-storage: Bulk Command S 0x43425355 T 0xc18 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 645.224870] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 645.225787] usb-storage: Status code 0; transferred 31/31
[ 645.225791] usb-storage: -- transfer complete
[ 645.225795] usb-storage: Bulk command transfer result=0
[ 645.225801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 645.460781] usb-storage: Status code 0; transferred 4096/4096
[ 645.460784] usb-storage: -- transfer complete
[ 645.460786] usb-storage: Bulk data transfer result 0x0
[ 645.460788] usb-storage: Attempting to get CSW...
[ 645.460790] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 645.483786] usb-storage: Status code 0; transferred 13/13
[ 645.483789] usb-storage: -- transfer complete
[ 645.483791] usb-storage: Bulk status result = 0
[ 645.483794] usb-storage: Bulk Status S 0x53425355 T 0xc18 R 0 Stat 0x0
[ 645.483797] usb-storage: scsi cmd done, result=0x0
[ 645.483800] usb-storage: *** thread sleeping.
[ 649.749553] usb-storage: queuecommand called
[ 649.749567] usb-storage: *** thread awakened.
[ 649.749573] usb-storage: Command WRITE_10 (10 bytes)
[ 649.749577] usb-storage: 2a 00 00 74 31 5f 00 00 58 00
[ 649.749596] usb-storage: Bulk Command S 0x43425355 T 0xc19 L 45056 F 0 Trg 0 LUN 0 CL 10
[ 649.749603] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 649.750792] usb-storage: Status code 0; transferred 31/31
[ 649.750797] usb-storage: -- transfer complete
[ 649.750802] usb-storage: Bulk command transfer result=0
[ 649.750808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 45056 bytes, 11 entries
[ 649.860807] usb-storage: Status code 0; transferred 45056/45056
[ 649.860813] usb-storage: -- transfer complete
[ 649.860817] usb-storage: Bulk data transfer result 0x0
[ 649.860821] usb-storage: Attempting to get CSW...
[ 649.860826] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 649.862776] usb-storage: Status code 0; transferred 13/13
[ 649.862780] usb-storage: -- transfer complete
[ 649.862784] usb-storage: Bulk status result = 0
[ 649.862789] usb-storage: Bulk Status S 0x53425355 T 0xc19 R 0 Stat 0x0
[ 649.862795] usb-storage: scsi cmd done, result=0x0
[ 649.862801] usb-storage: *** thread sleeping.
[ 649.862898] usb-storage: queuecommand called
[ 649.862910] usb-storage: *** thread awakened.
[ 649.862915] usb-storage: Command WRITE_10 (10 bytes)
[ 649.862919] usb-storage: 2a 00 00 74 31 b7 00 00 08 00
[ 649.862938] usb-storage: Bulk Command S 0x43425355 T 0xc1a L 4096 F 0 Trg 0 LUN 0 CL 10
[ 649.862944] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 649.863790] usb-storage: Status code 0; transferred 31/31
[ 649.863794] usb-storage: -- transfer complete
[ 649.863798] usb-storage: Bulk command transfer result=0
[ 649.863804] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 649.868784] usb-storage: Status code 0; transferred 4096/4096
[ 649.868789] usb-storage: -- transfer complete
[ 649.868793] usb-storage: Bulk data transfer result 0x0
[ 649.868797] usb-storage: Attempting to get CSW...
[ 649.868802] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 649.870793] usb-storage: Status code 0; transferred 13/13
[ 649.870800] usb-storage: -- transfer complete
[ 649.870804] usb-storage: Bulk status result = 0
[ 649.870810] usb-storage: Bulk Status S 0x53425355 T 0xc1a R 0 Stat 0x0
[ 649.870815] usb-storage: scsi cmd done, result=0x0
[ 649.870823] usb-storage: *** thread sleeping.
[ 655.040138] usb-storage: queuecommand called
[ 655.040169] usb-storage: *** thread awakened.
[ 655.040177] usb-storage: Command WRITE_10 (10 bytes)
[ 655.040181] usb-storage: 2a 00 00 74 31 bf 00 00 48 00
[ 655.040201] usb-storage: Bulk Command S 0x43425355 T 0xc1b L 36864 F 0 Trg 0 LUN 0 CL 10
[ 655.040207] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 655.041776] usb-storage: Status code 0; transferred 31/31
[ 655.041780] usb-storage: -- transfer complete
[ 655.041784] usb-storage: Bulk command transfer result=0
[ 655.041790] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 655.150822] usb-storage: Status code 0; transferred 36864/36864
[ 655.150827] usb-storage: -- transfer complete
[ 655.150831] usb-storage: Bulk data transfer result 0x0
[ 655.150835] usb-storage: Attempting to get CSW...
[ 655.150840] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 655.155776] usb-storage: Status code 0; transferred 13/13
[ 655.155780] usb-storage: -- transfer complete
[ 655.155784] usb-storage: Bulk status result = 0
[ 655.155789] usb-storage: Bulk Status S 0x53425355 T 0xc1b R 0 Stat 0x0
[ 655.155795] usb-storage: scsi cmd done, result=0x0
[ 655.155802] usb-storage: *** thread sleeping.
[ 655.155899] usb-storage: queuecommand called
[ 655.155929] usb-storage: *** thread awakened.
[ 655.155935] usb-storage: Command WRITE_10 (10 bytes)
[ 655.155938] usb-storage: 2a 00 00 74 32 07 00 00 08 00
[ 655.155957] usb-storage: Bulk Command S 0x43425355 T 0xc1c L 4096 F 0 Trg 0 LUN 0 CL 10
[ 655.155963] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 655.156790] usb-storage: Status code 0; transferred 31/31
[ 655.156794] usb-storage: -- transfer complete
[ 655.156798] usb-storage: Bulk command transfer result=0
[ 655.156803] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 655.163814] usb-storage: Status code 0; transferred 4096/4096
[ 655.163820] usb-storage: -- transfer complete
[ 655.163824] usb-storage: Bulk data transfer result 0x0
[ 655.163828] usb-storage: Attempting to get CSW...
[ 655.163834] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 655.165810] usb-storage: Status code 0; transferred 13/13
[ 655.165814] usb-storage: -- transfer complete
[ 655.165820] usb-storage: Bulk status result = 0
[ 655.165825] usb-storage: Bulk Status S 0x53425355 T 0xc1c R 0 Stat 0x0
[ 655.165832] usb-storage: scsi cmd done, result=0x0
[ 655.165839] usb-storage: *** thread sleeping.
[ 660.010043] usb-storage: queuecommand called
[ 660.010059] usb-storage: *** thread awakened.
[ 660.010067] usb-storage: Command WRITE_10 (10 bytes)
[ 660.010071] usb-storage: 2a 00 00 b9 1e 8f 00 00 a8 00
[ 660.010090] usb-storage: Bulk Command S 0x43425355 T 0xc1d L 86016 F 0 Trg 0 LUN 0 CL 10
[ 660.010097] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 660.011777] usb-storage: Status code 0; transferred 31/31
[ 660.011782] usb-storage: -- transfer complete
[ 660.011786] usb-storage: Bulk command transfer result=0
[ 660.011792] usb-storage: usb_stor_bulk_transfer_sglist: xfer 86016 bytes, 21 entries
[ 660.218813] usb-storage: Status code 0; transferred 86016/86016
[ 660.218818] usb-storage: -- transfer complete
[ 660.218823] usb-storage: Bulk data transfer result 0x0
[ 660.218827] usb-storage: Attempting to get CSW...
[ 660.218832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 660.243786] usb-storage: Status code 0; transferred 13/13
[ 660.243791] usb-storage: -- transfer complete
[ 660.243796] usb-storage: Bulk status result = 0
[ 660.243802] usb-storage: Bulk Status S 0x53425355 T 0xc1d R 0 Stat 0x0
[ 660.243807] usb-storage: scsi cmd done, result=0x0
[ 660.243815] usb-storage: *** thread sleeping.
[ 660.243877] usb-storage: queuecommand called
[ 660.243888] usb-storage: *** thread awakened.
[ 660.243893] usb-storage: Command WRITE_10 (10 bytes)
[ 660.243897] usb-storage: 2a 00 00 74 32 0f 00 00 50 00
[ 660.243916] usb-storage: Bulk Command S 0x43425355 T 0xc1e L 40960 F 0 Trg 0 LUN 0 CL 10
[ 660.243922] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 660.244785] usb-storage: Status code 0; transferred 31/31
[ 660.244790] usb-storage: -- transfer complete
[ 660.244795] usb-storage: Bulk command transfer result=0
[ 660.244801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 660.447825] usb-storage: Status code 0; transferred 40960/40960
[ 660.447830] usb-storage: -- transfer complete
[ 660.447835] usb-storage: Bulk data transfer result 0x0
[ 660.447839] usb-storage: Attempting to get CSW...
[ 660.447844] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 660.472782] usb-storage: Status code 0; transferred 13/13
[ 660.472786] usb-storage: -- transfer complete
[ 660.472790] usb-storage: Bulk status result = 0
[ 660.472796] usb-storage: Bulk Status S 0x53425355 T 0xc1e R 0 Stat 0x0
[ 660.472801] usb-storage: scsi cmd done, result=0x0
[ 660.472807] usb-storage: *** thread sleeping.
[ 660.472896] usb-storage: queuecommand called
[ 660.472908] usb-storage: *** thread awakened.
[ 660.472914] usb-storage: Command WRITE_10 (10 bytes)
[ 660.472918] usb-storage: 2a 00 00 74 32 5f 00 00 08 00
[ 660.472937] usb-storage: Bulk Command S 0x43425355 T 0xc1f L 4096 F 0 Trg 0 LUN 0 CL 10
[ 660.472943] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 660.473793] usb-storage: Status code 0; transferred 31/31
[ 660.473797] usb-storage: -- transfer complete
[ 660.473801] usb-storage: Bulk command transfer result=0
[ 660.473807] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 660.478793] usb-storage: Status code 0; transferred 4096/4096
[ 660.478798] usb-storage: -- transfer complete
[ 660.478802] usb-storage: Bulk data transfer result 0x0
[ 660.478805] usb-storage: Attempting to get CSW...
[ 660.478810] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 660.480775] usb-storage: Status code 0; transferred 13/13
[ 660.480779] usb-storage: -- transfer complete
[ 660.480783] usb-storage: Bulk status result = 0
[ 660.480788] usb-storage: Bulk Status S 0x53425355 T 0xc1f R 0 Stat 0x0
[ 660.480794] usb-storage: scsi cmd done, result=0x0
[ 660.480800] usb-storage: *** thread sleeping.
[ 670.010047] usb-storage: queuecommand called
[ 670.010080] usb-storage: *** thread awakened.
[ 670.010088] usb-storage: Command WRITE_10 (10 bytes)
[ 670.010093] usb-storage: 2a 00 00 b8 ff c7 00 00 78 00
[ 670.010113] usb-storage: Bulk Command S 0x43425355 T 0xc20 L 61440 F 0 Trg 0 LUN 0 CL 10
[ 670.010120] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 670.011794] usb-storage: Status code 0; transferred 31/31
[ 670.011799] usb-storage: -- transfer complete
[ 670.011803] usb-storage: Bulk command transfer result=0
[ 670.011809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 61440 bytes, 15 entries
[ 670.252835] usb-storage: Status code 0; transferred 61440/61440
[ 670.252840] usb-storage: -- transfer complete
[ 670.252845] usb-storage: Bulk data transfer result 0x0
[ 670.252849] usb-storage: Attempting to get CSW...
[ 670.252854] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 670.277786] usb-storage: Status code 0; transferred 13/13
[ 670.277791] usb-storage: -- transfer complete
[ 670.277795] usb-storage: Bulk status result = 0
[ 670.277801] usb-storage: Bulk Status S 0x53425355 T 0xc20 R 0 Stat 0x0
[ 670.277807] usb-storage: scsi cmd done, result=0x0
[ 670.277815] usb-storage: *** thread sleeping.
[ 670.277871] usb-storage: queuecommand called
[ 670.277887] usb-storage: *** thread awakened.
[ 670.277893] usb-storage: Command WRITE_10 (10 bytes)
[ 670.277896] usb-storage: 2a 00 00 b9 25 ff 00 00 a0 00
[ 670.277916] usb-storage: Bulk Command S 0x43425355 T 0xc21 L 81920 F 0 Trg 0 LUN 0 CL 10
[ 670.277921] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 670.278786] usb-storage: Status code 0; transferred 31/31
[ 670.278791] usb-storage: -- transfer complete
[ 670.278795] usb-storage: Bulk command transfer result=0
[ 670.278801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 81920 bytes, 20 entries
[ 670.624814] usb-storage: Status code 0; transferred 81920/81920
[ 670.624818] usb-storage: -- transfer complete
[ 670.624823] usb-storage: Bulk data transfer result 0x0
[ 670.624826] usb-storage: Attempting to get CSW...
[ 670.624831] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 670.626776] usb-storage: Status code 0; transferred 13/13
[ 670.626780] usb-storage: -- transfer complete
[ 670.626784] usb-storage: Bulk status result = 0
[ 670.626789] usb-storage: Bulk Status S 0x53425355 T 0xc21 R 0 Stat 0x0
[ 670.626795] usb-storage: scsi cmd done, result=0x0
[ 670.626801] usb-storage: *** thread sleeping.
[ 670.626856] usb-storage: queuecommand called
[ 670.626872] usb-storage: *** thread awakened.
[ 670.626878] usb-storage: Command WRITE_10 (10 bytes)
[ 670.626881] usb-storage: 2a 00 00 b9 68 77 00 00 28 00
[ 670.626900] usb-storage: Bulk Command S 0x43425355 T 0xc22 L 20480 F 0 Trg 0 LUN 0 CL 10
[ 670.626906] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 670.627784] usb-storage: Status code 0; transferred 31/31
[ 670.627788] usb-storage: -- transfer complete
[ 670.627792] usb-storage: Bulk command transfer result=0
[ 670.627798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 20480 bytes, 5 entries
[ 670.739805] usb-storage: Status code 0; transferred 20480/20480
[ 670.739810] usb-storage: -- transfer complete
[ 670.739814] usb-storage: Bulk data transfer result 0x0
[ 670.739818] usb-storage: Attempting to get CSW...
[ 670.739823] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 670.743782] usb-storage: Status code 0; transferred 13/13
[ 670.743787] usb-storage: -- transfer complete
[ 670.743791] usb-storage: Bulk status result = 0
[ 670.743796] usb-storage: Bulk Status S 0x53425355 T 0xc22 R 0 Stat 0x0
[ 670.743801] usb-storage: scsi cmd done, result=0x0
[ 670.743808] usb-storage: *** thread sleeping.
[ 670.743839] usb-storage: queuecommand called
[ 670.743849] usb-storage: *** thread awakened.
[ 670.743854] usb-storage: Command WRITE_10 (10 bytes)
[ 670.743858] usb-storage: 2a 00 00 74 32 67 00 00 48 00
[ 670.743877] usb-storage: Bulk Command S 0x43425355 T 0xc23 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 670.743883] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 670.744794] usb-storage: Status code 0; transferred 31/31
[ 670.744798] usb-storage: -- transfer complete
[ 670.744802] usb-storage: Bulk command transfer result=0
[ 670.744807] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 671.074823] usb-storage: Status code 0; transferred 36864/36864
[ 671.074828] usb-storage: -- transfer complete
[ 671.074833] usb-storage: Bulk data transfer result 0x0
[ 671.074836] usb-storage: Attempting to get CSW...
[ 671.074841] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 671.099782] usb-storage: Status code 0; transferred 13/13
[ 671.099787] usb-storage: -- transfer complete
[ 671.099791] usb-storage: Bulk status result = 0
[ 671.099796] usb-storage: Bulk Status S 0x53425355 T 0xc23 R 0 Stat 0x0
[ 671.099801] usb-storage: scsi cmd done, result=0x0
[ 671.099808] usb-storage: *** thread sleeping.
[ 671.099902] usb-storage: queuecommand called
[ 671.099914] usb-storage: *** thread awakened.
[ 671.099919] usb-storage: Command WRITE_10 (10 bytes)
[ 671.099923] usb-storage: 2a 00 00 74 32 af 00 00 08 00
[ 671.099942] usb-storage: Bulk Command S 0x43425355 T 0xc24 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 671.099948] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 671.100796] usb-storage: Status code 0; transferred 31/31
[ 671.100800] usb-storage: -- transfer complete
[ 671.100804] usb-storage: Bulk command transfer result=0
[ 671.100809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 671.106811] usb-storage: Status code 0; transferred 4096/4096
[ 671.106815] usb-storage: -- transfer complete
[ 671.106819] usb-storage: Bulk data transfer result 0x0
[ 671.106823] usb-storage: Attempting to get CSW...
[ 671.106828] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 671.108793] usb-storage: Status code 0; transferred 13/13
[ 671.108797] usb-storage: -- transfer complete
[ 671.108801] usb-storage: Bulk status result = 0
[ 671.108807] usb-storage: Bulk Status S 0x53425355 T 0xc24 R 0 Stat 0x0
[ 671.108812] usb-storage: scsi cmd done, result=0x0
[ 671.108819] usb-storage: *** thread sleeping.
[ 675.010055] usb-storage: queuecommand called
[ 675.010077] usb-storage: *** thread awakened.
[ 675.010084] usb-storage: Command WRITE_10 (10 bytes)
[ 675.010088] usb-storage: 2a 00 00 b7 49 6f 00 00 08 00
[ 675.010106] usb-storage: Bulk Command S 0x43425355 T 0xc25 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 675.010112] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 675.011778] usb-storage: Status code 0; transferred 31/31
[ 675.011782] usb-storage: -- transfer complete
[ 675.011786] usb-storage: Bulk command transfer result=0
[ 675.011792] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 675.025826] usb-storage: Status code 0; transferred 4096/4096
[ 675.025831] usb-storage: -- transfer complete
[ 675.025835] usb-storage: Bulk data transfer result 0x0
[ 675.025839] usb-storage: Attempting to get CSW...
[ 675.025844] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 675.050785] usb-storage: Status code 0; transferred 13/13
[ 675.050790] usb-storage: -- transfer complete
[ 675.050794] usb-storage: Bulk status result = 0
[ 675.050800] usb-storage: Bulk Status S 0x53425355 T 0xc25 R 0 Stat 0x0
[ 675.050805] usb-storage: scsi cmd done, result=0x0
[ 675.050813] usb-storage: *** thread sleeping.
[ 675.050841] usb-storage: queuecommand called
[ 675.050851] usb-storage: *** thread awakened.
[ 675.050856] usb-storage: Command WRITE_10 (10 bytes)
[ 675.050860] usb-storage: 2a 00 00 74 32 b7 00 00 48 00
[ 675.050879] usb-storage: Bulk Command S 0x43425355 T 0xc26 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 675.050885] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 675.051786] usb-storage: Status code 0; transferred 31/31
[ 675.051790] usb-storage: -- transfer complete
[ 675.051794] usb-storage: Bulk command transfer result=0
[ 675.051800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 675.404816] usb-storage: Status code 0; transferred 36864/36864
[ 675.404821] usb-storage: -- transfer complete
[ 675.404825] usb-storage: Bulk data transfer result 0x0
[ 675.404829] usb-storage: Attempting to get CSW...
[ 675.404833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 675.406777] usb-storage: Status code 0; transferred 13/13
[ 675.406781] usb-storage: -- transfer complete
[ 675.406785] usb-storage: Bulk status result = 0
[ 675.406790] usb-storage: Bulk Status S 0x53425355 T 0xc26 R 0 Stat 0x0
[ 675.406796] usb-storage: scsi cmd done, result=0x0
[ 675.406803] usb-storage: *** thread sleeping.
[ 675.406905] usb-storage: queuecommand called
[ 675.406928] usb-storage: *** thread awakened.
[ 675.406934] usb-storage: Command WRITE_10 (10 bytes)
[ 675.406937] usb-storage: 2a 00 00 74 32 ff 00 00 08 00
[ 675.406956] usb-storage: Bulk Command S 0x43425355 T 0xc27 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 675.406962] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 675.407796] usb-storage: Status code 0; transferred 31/31
[ 675.407800] usb-storage: -- transfer complete
[ 675.407804] usb-storage: Bulk command transfer result=0
[ 675.407810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 675.413809] usb-storage: Status code 0; transferred 4096/4096
[ 675.413815] usb-storage: -- transfer complete
[ 675.413819] usb-storage: Bulk data transfer result 0x0
[ 675.413823] usb-storage: Attempting to get CSW...
[ 675.413829] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 675.414792] usb-storage: Status code 0; transferred 13/13
[ 675.414797] usb-storage: -- transfer complete
[ 675.414801] usb-storage: Bulk status result = 0
[ 675.414806] usb-storage: Bulk Status S 0x53425355 T 0xc27 R 0 Stat 0x0
[ 675.414813] usb-storage: scsi cmd done, result=0x0
[ 675.414820] usb-storage: *** thread sleeping.
[ 680.010042] usb-storage: queuecommand called
[ 680.010073] usb-storage: *** thread awakened.
[ 680.010081] usb-storage: Command WRITE_10 (10 bytes)
[ 680.010084] usb-storage: 2a 00 00 b4 02 37 00 00 08 00
[ 680.010104] usb-storage: Bulk Command S 0x43425355 T 0xc28 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 680.010110] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 680.011795] usb-storage: Status code 0; transferred 31/31
[ 680.011800] usb-storage: -- transfer complete
[ 680.011804] usb-storage: Bulk command transfer result=0
[ 680.011810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 680.025810] usb-storage: Status code 0; transferred 4096/4096
[ 680.025815] usb-storage: -- transfer complete
[ 680.025820] usb-storage: Bulk data transfer result 0x0
[ 680.025824] usb-storage: Attempting to get CSW...
[ 680.025829] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 680.050786] usb-storage: Status code 0; transferred 13/13
[ 680.050790] usb-storage: -- transfer complete
[ 680.050795] usb-storage: Bulk status result = 0
[ 680.050800] usb-storage: Bulk Status S 0x53425355 T 0xc28 R 0 Stat 0x0
[ 680.050806] usb-storage: scsi cmd done, result=0x0
[ 680.050813] usb-storage: *** thread sleeping.
[ 680.050842] usb-storage: queuecommand called
[ 680.050853] usb-storage: *** thread awakened.
[ 680.050858] usb-storage: Command WRITE_10 (10 bytes)
[ 680.050862] usb-storage: 2a 00 00 74 33 07 00 00 50 00
[ 680.050881] usb-storage: Bulk Command S 0x43425355 T 0xc29 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 680.050887] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 680.051778] usb-storage: Status code 0; transferred 31/31
[ 680.051782] usb-storage: -- transfer complete
[ 680.051787] usb-storage: Bulk command transfer result=0
[ 680.051792] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 680.418813] usb-storage: Status code 0; transferred 40960/40960
[ 680.418818] usb-storage: -- transfer complete
[ 680.418823] usb-storage: Bulk data transfer result 0x0
[ 680.418827] usb-storage: Attempting to get CSW...
[ 680.418831] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 680.420798] usb-storage: Status code 0; transferred 13/13
[ 680.420803] usb-storage: -- transfer complete
[ 680.420808] usb-storage: Bulk status result = 0
[ 680.420813] usb-storage: Bulk Status S 0x53425355 T 0xc29 R 0 Stat 0x0
[ 680.420818] usb-storage: scsi cmd done, result=0x0
[ 680.420825] usb-storage: *** thread sleeping.
[ 680.420914] usb-storage: queuecommand called
[ 680.420925] usb-storage: *** thread awakened.
[ 680.420930] usb-storage: Command WRITE_10 (10 bytes)
[ 680.420934] usb-storage: 2a 00 00 74 33 57 00 00 08 00
[ 680.420953] usb-storage: Bulk Command S 0x43425355 T 0xc2a L 4096 F 0 Trg 0 LUN 0 CL 10
[ 680.420959] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 680.421794] usb-storage: Status code 0; transferred 31/31
[ 680.421799] usb-storage: -- transfer complete
[ 680.421803] usb-storage: Bulk command transfer result=0
[ 680.421808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 680.427816] usb-storage: Status code 0; transferred 4096/4096
[ 680.427820] usb-storage: -- transfer complete
[ 680.427824] usb-storage: Bulk data transfer result 0x0
[ 680.427828] usb-storage: Attempting to get CSW...
[ 680.427833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 680.428779] usb-storage: Status code 0; transferred 13/13
[ 680.428783] usb-storage: -- transfer complete
[ 680.428787] usb-storage: Bulk status result = 0
[ 680.428793] usb-storage: Bulk Status S 0x53425355 T 0xc2a R 0 Stat 0x0
[ 680.428798] usb-storage: scsi cmd done, result=0x0
[ 680.428805] usb-storage: *** thread sleeping.
[ 685.040152] usb-storage: queuecommand called
[ 685.040165] usb-storage: *** thread awakened.
[ 685.040171] usb-storage: Command WRITE_10 (10 bytes)
[ 685.040175] usb-storage: 2a 00 00 74 33 5f 00 00 48 00
[ 685.040194] usb-storage: Bulk Command S 0x43425355 T 0xc2b L 36864 F 0 Trg 0 LUN 0 CL 10
[ 685.040200] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 685.041795] usb-storage: Status code 0; transferred 31/31
[ 685.041800] usb-storage: -- transfer complete
[ 685.041804] usb-storage: Bulk command transfer result=0
[ 685.041811] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 685.221815] usb-storage: Status code 0; transferred 36864/36864
[ 685.221819] usb-storage: -- transfer complete
[ 685.221824] usb-storage: Bulk data transfer result 0x0
[ 685.221828] usb-storage: Attempting to get CSW...
[ 685.221833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 685.225791] usb-storage: Status code 0; transferred 13/13
[ 685.225795] usb-storage: -- transfer complete
[ 685.225799] usb-storage: Bulk status result = 0
[ 685.225805] usb-storage: Bulk Status S 0x53425355 T 0xc2b R 0 Stat 0x0
[ 685.225810] usb-storage: scsi cmd done, result=0x0
[ 685.225817] usb-storage: *** thread sleeping.
[ 685.225904] usb-storage: queuecommand called
[ 685.225933] usb-storage: *** thread awakened.
[ 685.225939] usb-storage: Command WRITE_10 (10 bytes)
[ 685.225943] usb-storage: 2a 00 00 74 33 a7 00 00 08 00
[ 685.225962] usb-storage: Bulk Command S 0x43425355 T 0xc2c L 4096 F 0 Trg 0 LUN 0 CL 10
[ 685.225968] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 685.226807] usb-storage: Status code 0; transferred 31/31
[ 685.226811] usb-storage: -- transfer complete
[ 685.226815] usb-storage: Bulk command transfer result=0
[ 685.226821] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 685.233793] usb-storage: Status code 0; transferred 4096/4096
[ 685.233798] usb-storage: -- transfer complete
[ 685.233802] usb-storage: Bulk data transfer result 0x0
[ 685.233806] usb-storage: Attempting to get CSW...
[ 685.233810] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 685.234789] usb-storage: Status code 0; transferred 13/13
[ 685.234793] usb-storage: -- transfer complete
[ 685.234797] usb-storage: Bulk status result = 0
[ 685.234802] usb-storage: Bulk Status S 0x53425355 T 0xc2c R 0 Stat 0x0
[ 685.234808] usb-storage: scsi cmd done, result=0x0
[ 685.234814] usb-storage: *** thread sleeping.
[ 690.758541] usb-storage: queuecommand called
[ 690.758573] usb-storage: *** thread awakened.
[ 690.758581] usb-storage: Command WRITE_10 (10 bytes)
[ 690.758586] usb-storage: 2a 00 00 74 33 af 00 00 50 00
[ 690.758605] usb-storage: Bulk Command S 0x43425355 T 0xc2d L 40960 F 0 Trg 0 LUN 0 CL 10
[ 690.758612] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 690.759796] usb-storage: Status code 0; transferred 31/31
[ 690.759800] usb-storage: -- transfer complete
[ 690.759804] usb-storage: Bulk command transfer result=0
[ 690.759810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 690.957812] usb-storage: Status code 0; transferred 40960/40960
[ 690.957817] usb-storage: -- transfer complete
[ 690.957821] usb-storage: Bulk data transfer result 0x0
[ 690.957825] usb-storage: Attempting to get CSW...
[ 690.957830] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 690.961774] usb-storage: Status code 0; transferred 13/13
[ 690.961779] usb-storage: -- transfer complete
[ 690.961783] usb-storage: Bulk status result = 0
[ 690.961788] usb-storage: Bulk Status S 0x53425355 T 0xc2d R 0 Stat 0x0
[ 690.961794] usb-storage: scsi cmd done, result=0x0
[ 690.961800] usb-storage: *** thread sleeping.
[ 690.961912] usb-storage: queuecommand called
[ 690.962533] usb-storage: *** thread awakened.
[ 690.962540] usb-storage: Command WRITE_10 (10 bytes)
[ 690.962544] usb-storage: 2a 00 00 74 33 ff 00 00 08 00
[ 690.962564] usb-storage: Bulk Command S 0x43425355 T 0xc2e L 4096 F 0 Trg 0 LUN 0 CL 10
[ 690.962570] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 690.962829] usb-storage: Status code 0; transferred 31/31
[ 690.962834] usb-storage: -- transfer complete
[ 690.962838] usb-storage: Bulk command transfer result=0
[ 690.962844] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 690.974789] usb-storage: Status code 0; transferred 4096/4096
[ 690.974792] usb-storage: -- transfer complete
[ 690.974794] usb-storage: Bulk data transfer result 0x0
[ 690.974796] usb-storage: Attempting to get CSW...
[ 690.974798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 690.976773] usb-storage: Status code 0; transferred 13/13
[ 690.976775] usb-storage: -- transfer complete
[ 690.976777] usb-storage: Bulk status result = 0
[ 690.976779] usb-storage: Bulk Status S 0x53425355 T 0xc2e R 0 Stat 0x0
[ 690.976782] usb-storage: scsi cmd done, result=0x0
[ 690.976786] usb-storage: *** thread sleeping.
[ 695.010039] usb-storage: queuecommand called
[ 695.010052] usb-storage: *** thread awakened.
[ 695.010057] usb-storage: Command WRITE_10 (10 bytes)
[ 695.010061] usb-storage: 2a 00 00 b9 1f 2f 00 00 48 00
[ 695.010081] usb-storage: Bulk Command S 0x43425355 T 0xc2f L 36864 F 0 Trg 0 LUN 0 CL 10
[ 695.010087] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 695.011781] usb-storage: Status code 0; transferred 31/31
[ 695.011785] usb-storage: -- transfer complete
[ 695.011789] usb-storage: Bulk command transfer result=0
[ 695.011795] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 695.200818] usb-storage: Status code 0; transferred 36864/36864
[ 695.200824] usb-storage: -- transfer complete
[ 695.200828] usb-storage: Bulk data transfer result 0x0
[ 695.200833] usb-storage: Attempting to get CSW...
[ 695.200838] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 695.225804] usb-storage: Status code 0; transferred 13/13
[ 695.225809] usb-storage: -- transfer complete
[ 695.225813] usb-storage: Bulk status result = 0
[ 695.225818] usb-storage: Bulk Status S 0x53425355 T 0xc2f R 0 Stat 0x0
[ 695.225824] usb-storage: scsi cmd done, result=0x0
[ 695.225831] usb-storage: *** thread sleeping.
[ 696.040165] usb-storage: queuecommand called
[ 696.040179] usb-storage: *** thread awakened.
[ 696.040185] usb-storage: Command WRITE_10 (10 bytes)
[ 696.040188] usb-storage: 2a 00 00 74 34 07 00 00 48 00
[ 696.040208] usb-storage: Bulk Command S 0x43425355 T 0xc30 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 696.040215] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 696.041794] usb-storage: Status code 0; transferred 31/31
[ 696.041798] usb-storage: -- transfer complete
[ 696.041802] usb-storage: Bulk command transfer result=0
[ 696.041808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 696.087817] usb-storage: Status code 0; transferred 36864/36864
[ 696.087822] usb-storage: -- transfer complete
[ 696.087826] usb-storage: Bulk data transfer result 0x0
[ 696.087830] usb-storage: Attempting to get CSW...
[ 696.087835] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 696.112787] usb-storage: Status code 0; transferred 13/13
[ 696.112792] usb-storage: -- transfer complete
[ 696.112796] usb-storage: Bulk status result = 0
[ 696.112802] usb-storage: Bulk Status S 0x53425355 T 0xc30 R 0 Stat 0x0
[ 696.112807] usb-storage: scsi cmd done, result=0x0
[ 696.112813] usb-storage: *** thread sleeping.
[ 696.112898] usb-storage: queuecommand called
[ 696.112910] usb-storage: *** thread awakened.
[ 696.112915] usb-storage: Command WRITE_10 (10 bytes)
[ 696.112919] usb-storage: 2a 00 00 74 34 4f 00 00 08 00
[ 696.112938] usb-storage: Bulk Command S 0x43425355 T 0xc31 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 696.112943] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 696.113808] usb-storage: Status code 0; transferred 31/31
[ 696.113813] usb-storage: -- transfer complete
[ 696.113817] usb-storage: Bulk command transfer result=0
[ 696.113824] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 696.120801] usb-storage: Status code 0; transferred 4096/4096
[ 696.120806] usb-storage: -- transfer complete
[ 696.120810] usb-storage: Bulk data transfer result 0x0
[ 696.120814] usb-storage: Attempting to get CSW...
[ 696.120819] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 696.121775] usb-storage: Status code 0; transferred 13/13
[ 696.121780] usb-storage: -- transfer complete
[ 696.121784] usb-storage: Bulk status result = 0
[ 696.121789] usb-storage: Bulk Status S 0x53425355 T 0xc31 R 0 Stat 0x0
[ 696.121794] usb-storage: scsi cmd done, result=0x0
[ 696.121801] usb-storage: *** thread sleeping.
[ 701.040152] usb-storage: queuecommand called
[ 701.040190] usb-storage: *** thread awakened.
[ 701.040198] usb-storage: Command WRITE_10 (10 bytes)
[ 701.040202] usb-storage: 2a 00 00 74 34 57 00 00 50 00
[ 701.040222] usb-storage: Bulk Command S 0x43425355 T 0xc32 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 701.040228] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 701.041795] usb-storage: Status code 0; transferred 31/31
[ 701.041799] usb-storage: -- transfer complete
[ 701.041803] usb-storage: Bulk command transfer result=0
[ 701.041809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 701.094831] usb-storage: Status code 0; transferred 40960/40960
[ 701.094835] usb-storage: -- transfer complete
[ 701.094840] usb-storage: Bulk data transfer result 0x0
[ 701.094844] usb-storage: Attempting to get CSW...
[ 701.094849] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 701.098794] usb-storage: Status code 0; transferred 13/13
[ 701.098798] usb-storage: -- transfer complete
[ 701.098802] usb-storage: Bulk status result = 0
[ 701.098807] usb-storage: Bulk Status S 0x53425355 T 0xc32 R 0 Stat 0x0
[ 701.098813] usb-storage: scsi cmd done, result=0x0
[ 701.098820] usb-storage: *** thread sleeping.
[ 701.098908] usb-storage: queuecommand called
[ 701.098920] usb-storage: *** thread awakened.
[ 701.098925] usb-storage: Command WRITE_10 (10 bytes)
[ 701.098928] usb-storage: 2a 00 00 74 34 a7 00 00 08 00
[ 701.098947] usb-storage: Bulk Command S 0x43425355 T 0xc33 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 701.098953] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 701.099784] usb-storage: Status code 0; transferred 31/31
[ 701.099788] usb-storage: -- transfer complete
[ 701.099792] usb-storage: Bulk command transfer result=0
[ 701.099798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 701.106819] usb-storage: Status code 0; transferred 4096/4096
[ 701.106824] usb-storage: -- transfer complete
[ 701.106828] usb-storage: Bulk data transfer result 0x0
[ 701.106832] usb-storage: Attempting to get CSW...
[ 701.106837] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 701.108797] usb-storage: Status code 0; transferred 13/13
[ 701.108802] usb-storage: -- transfer complete
[ 701.108806] usb-storage: Bulk status result = 0
[ 701.108812] usb-storage: Bulk Status S 0x53425355 T 0xc33 R 0 Stat 0x0
[ 701.108818] usb-storage: scsi cmd done, result=0x0
[ 701.108825] usb-storage: *** thread sleeping.
[ 705.010041] usb-storage: queuecommand called
[ 705.010074] usb-storage: *** thread awakened.
[ 705.010080] usb-storage: Command WRITE_10 (10 bytes)
[ 705.010084] usb-storage: 2a 00 00 b9 68 97 00 00 20 00
[ 705.010104] usb-storage: Bulk Command S 0x43425355 T 0xc34 L 16384 F 0 Trg 0 LUN 0 CL 10
[ 705.010110] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 705.011785] usb-storage: Status code 0; transferred 31/31
[ 705.011790] usb-storage: -- transfer complete
[ 705.011794] usb-storage: Bulk command transfer result=0
[ 705.011800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
[ 705.062814] usb-storage: Status code 0; transferred 16384/16384
[ 705.062819] usb-storage: -- transfer complete
[ 705.062823] usb-storage: Bulk data transfer result 0x0
[ 705.062827] usb-storage: Attempting to get CSW...
[ 705.062832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 705.087807] usb-storage: Status code 0; transferred 13/13
[ 705.087812] usb-storage: -- transfer complete
[ 705.087816] usb-storage: Bulk status result = 0
[ 705.087821] usb-storage: Bulk Status S 0x53425355 T 0xc34 R 0 Stat 0x0
[ 705.087826] usb-storage: scsi cmd done, result=0x0
[ 705.087833] usb-storage: *** thread sleeping.
[ 705.087867] usb-storage: queuecommand called
[ 705.087883] usb-storage: *** thread awakened.
[ 705.087889] usb-storage: Command WRITE_10 (10 bytes)
[ 705.087892] usb-storage: 2a 00 00 b9 6b 7f 00 00 30 00
[ 705.087911] usb-storage: Bulk Command S 0x43425355 T 0xc35 L 24576 F 0 Trg 0 LUN 0 CL 10
[ 705.087917] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 705.088782] usb-storage: Status code 0; transferred 31/31
[ 705.088786] usb-storage: -- transfer complete
[ 705.088790] usb-storage: Bulk command transfer result=0
[ 705.088796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 24576 bytes, 6 entries
[ 705.244802] usb-storage: Status code 0; transferred 24576/24576
[ 705.244805] usb-storage: -- transfer complete
[ 705.244807] usb-storage: Bulk data transfer result 0x0
[ 705.244809] usb-storage: Attempting to get CSW...
[ 705.244812] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 705.249785] usb-storage: Status code 0; transferred 13/13
[ 705.249787] usb-storage: -- transfer complete
[ 705.249789] usb-storage: Bulk status result = 0
[ 705.249791] usb-storage: Bulk Status S 0x53425355 T 0xc35 R 0 Stat 0x0
[ 705.249794] usb-storage: scsi cmd done, result=0x0
[ 705.249798] usb-storage: *** thread sleeping.
[ 705.249821] usb-storage: queuecommand called
[ 705.249826] usb-storage: *** thread awakened.
[ 705.249829] usb-storage: Command WRITE_10 (10 bytes)
[ 705.249831] usb-storage: 2a 00 00 b9 26 97 00 00 50 00
[ 705.249840] usb-storage: Bulk Command S 0x43425355 T 0xc36 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 705.249843] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 705.250781] usb-storage: Status code 0; transferred 31/31
[ 705.250786] usb-storage: -- transfer complete
[ 705.250790] usb-storage: Bulk command transfer result=0
[ 705.250796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 705.430794] usb-storage: Status code 0; transferred 40960/40960
[ 705.430797] usb-storage: -- transfer complete
[ 705.430799] usb-storage: Bulk data transfer result 0x0
[ 705.430801] usb-storage: Attempting to get CSW...
[ 705.430804] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 705.432771] usb-storage: Status code 0; transferred 13/13
[ 705.432773] usb-storage: -- transfer complete
[ 705.432775] usb-storage: Bulk status result = 0
[ 705.432778] usb-storage: Bulk Status S 0x53425355 T 0xc36 R 0 Stat 0x0
[ 705.432780] usb-storage: scsi cmd done, result=0x0
[ 705.432783] usb-storage: *** thread sleeping.
[ 706.040138] usb-storage: queuecommand called
[ 706.040150] usb-storage: *** thread awakened.
[ 706.040156] usb-storage: Command WRITE_10 (10 bytes)
[ 706.040160] usb-storage: 2a 00 00 74 34 af 00 00 48 00
[ 706.040179] usb-storage: Bulk Command S 0x43425355 T 0xc37 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 706.040185] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 706.041782] usb-storage: Status code 0; transferred 31/31
[ 706.041786] usb-storage: -- transfer complete
[ 706.041790] usb-storage: Bulk command transfer result=0
[ 706.041796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 706.115819] usb-storage: Status code 0; transferred 36864/36864
[ 706.115825] usb-storage: -- transfer complete
[ 706.115829] usb-storage: Bulk data transfer result 0x0
[ 706.115834] usb-storage: Attempting to get CSW...
[ 706.115839] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 706.140791] usb-storage: Status code 0; transferred 13/13
[ 706.140795] usb-storage: -- transfer complete
[ 706.140800] usb-storage: Bulk status result = 0
[ 706.140805] usb-storage: Bulk Status S 0x53425355 T 0xc37 R 0 Stat 0x0
[ 706.140811] usb-storage: scsi cmd done, result=0x0
[ 706.140818] usb-storage: *** thread sleeping.
[ 706.140917] usb-storage: queuecommand called
[ 706.141571] usb-storage: *** thread awakened.
[ 706.141577] usb-storage: Command WRITE_10 (10 bytes)
[ 706.141581] usb-storage: 2a 00 00 74 34 f7 00 00 08 00
[ 706.141601] usb-storage: Bulk Command S 0x43425355 T 0xc38 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 706.141607] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 706.141798] usb-storage: Status code 0; transferred 31/31
[ 706.141803] usb-storage: -- transfer complete
[ 706.141807] usb-storage: Bulk command transfer result=0
[ 706.141813] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 706.147819] usb-storage: Status code 0; transferred 4096/4096
[ 706.147824] usb-storage: -- transfer complete
[ 706.147829] usb-storage: Bulk data transfer result 0x0
[ 706.147832] usb-storage: Attempting to get CSW...
[ 706.147837] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 706.149794] usb-storage: Status code 0; transferred 13/13
[ 706.149799] usb-storage: -- transfer complete
[ 706.149803] usb-storage: Bulk status result = 0
[ 706.149809] usb-storage: Bulk Status S 0x53425355 T 0xc38 R 0 Stat 0x0
[ 706.149815] usb-storage: scsi cmd done, result=0x0
[ 706.149823] usb-storage: *** thread sleeping.
[ 710.010049] usb-storage: queuecommand called
[ 710.010083] usb-storage: *** thread awakened.
[ 710.010092] usb-storage: Command WRITE_10 (10 bytes)
[ 710.010096] usb-storage: 2a 00 00 b7 49 6f 00 00 08 00
[ 710.010116] usb-storage: Bulk Command S 0x43425355 T 0xc39 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 710.010123] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 710.011799] usb-storage: Status code 0; transferred 31/31
[ 710.011804] usb-storage: -- transfer complete
[ 710.011808] usb-storage: Bulk command transfer result=0
[ 710.011814] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 710.025814] usb-storage: Status code 0; transferred 4096/4096
[ 710.025819] usb-storage: -- transfer complete
[ 710.025824] usb-storage: Bulk data transfer result 0x0
[ 710.025828] usb-storage: Attempting to get CSW...
[ 710.025833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 710.050792] usb-storage: Status code 0; transferred 13/13
[ 710.050797] usb-storage: -- transfer complete
[ 710.050802] usb-storage: Bulk status result = 0
[ 710.050807] usb-storage: Bulk Status S 0x53425355 T 0xc39 R 0 Stat 0x0
[ 710.050813] usb-storage: scsi cmd done, result=0x0
[ 710.050821] usb-storage: *** thread sleeping.
[ 711.040205] usb-storage: queuecommand called
[ 711.040242] usb-storage: *** thread awakened.
[ 711.040250] usb-storage: Command WRITE_10 (10 bytes)
[ 711.040254] usb-storage: 2a 00 00 74 34 ff 00 00 50 00
[ 711.040274] usb-storage: Bulk Command S 0x43425355 T 0xc3a L 40960 F 0 Trg 0 LUN 0 CL 10
[ 711.040280] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 711.041796] usb-storage: Status code 0; transferred 31/31
[ 711.041800] usb-storage: -- transfer complete
[ 711.041804] usb-storage: Bulk command transfer result=0
[ 711.041810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 711.132833] usb-storage: Status code 0; transferred 40960/40960
[ 711.132838] usb-storage: -- transfer complete
[ 711.132843] usb-storage: Bulk data transfer result 0x0
[ 711.132847] usb-storage: Attempting to get CSW...
[ 711.132852] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 711.134780] usb-storage: Status code 0; transferred 13/13
[ 711.134784] usb-storage: -- transfer complete
[ 711.134788] usb-storage: Bulk status result = 0
[ 711.134793] usb-storage: Bulk Status S 0x53425355 T 0xc3a R 0 Stat 0x0
[ 711.134799] usb-storage: scsi cmd done, result=0x0
[ 711.134806] usb-storage: *** thread sleeping.
[ 711.134893] usb-storage: queuecommand called
[ 711.134905] usb-storage: *** thread awakened.
[ 711.134910] usb-storage: Command WRITE_10 (10 bytes)
[ 711.134914] usb-storage: 2a 00 00 74 35 4f 00 00 08 00
[ 711.134933] usb-storage: Bulk Command S 0x43425355 T 0xc3b L 4096 F 0 Trg 0 LUN 0 CL 10
[ 711.134938] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 711.135799] usb-storage: Status code 0; transferred 31/31
[ 711.135803] usb-storage: -- transfer complete
[ 711.135807] usb-storage: Bulk command transfer result=0
[ 711.135812] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 711.141816] usb-storage: Status code 0; transferred 4096/4096
[ 711.141821] usb-storage: -- transfer complete
[ 711.141826] usb-storage: Bulk data transfer result 0x0
[ 711.141830] usb-storage: Attempting to get CSW...
[ 711.141835] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 711.143793] usb-storage: Status code 0; transferred 13/13
[ 711.143798] usb-storage: -- transfer complete
[ 711.143803] usb-storage: Bulk status result = 0
[ 711.143810] usb-storage: Bulk Status S 0x53425355 T 0xc3b R 0 Stat 0x0
[ 711.143816] usb-storage: scsi cmd done, result=0x0
[ 711.143825] usb-storage: *** thread sleeping.
[ 715.010045] usb-storage: queuecommand called
[ 715.010060] usb-storage: *** thread awakened.
[ 715.010067] usb-storage: Command WRITE_10 (10 bytes)
[ 715.010071] usb-storage: 2a 00 00 b4 00 f7 00 00 08 00
[ 715.010091] usb-storage: Bulk Command S 0x43425355 T 0xc3c L 4096 F 0 Trg 0 LUN 0 CL 10
[ 715.010097] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 715.011785] usb-storage: Status code 0; transferred 31/31
[ 715.011789] usb-storage: -- transfer complete
[ 715.011793] usb-storage: Bulk command transfer result=0
[ 715.011799] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 715.025827] usb-storage: Status code 0; transferred 4096/4096
[ 715.025832] usb-storage: -- transfer complete
[ 715.025837] usb-storage: Bulk data transfer result 0x0
[ 715.025840] usb-storage: Attempting to get CSW...
[ 715.025845] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 715.050792] usb-storage: Status code 0; transferred 13/13
[ 715.050798] usb-storage: -- transfer complete
[ 715.050802] usb-storage: Bulk status result = 0
[ 715.050808] usb-storage: Bulk Status S 0x53425355 T 0xc3c R 0 Stat 0x0
[ 715.050814] usb-storage: scsi cmd done, result=0x0
[ 715.050821] usb-storage: *** thread sleeping.
[ 716.040181] usb-storage: queuecommand called
[ 716.040194] usb-storage: *** thread awakened.
[ 716.040200] usb-storage: Command WRITE_10 (10 bytes)
[ 716.040204] usb-storage: 2a 00 00 74 35 57 00 00 50 00
[ 716.040224] usb-storage: Bulk Command S 0x43425355 T 0xc3d L 40960 F 0 Trg 0 LUN 0 CL 10
[ 716.040231] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 716.041797] usb-storage: Status code 0; transferred 31/31
[ 716.041802] usb-storage: -- transfer complete
[ 716.041806] usb-storage: Bulk command transfer result=0
[ 716.041812] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 716.146819] usb-storage: Status code 0; transferred 40960/40960
[ 716.146825] usb-storage: -- transfer complete
[ 716.146829] usb-storage: Bulk data transfer result 0x0
[ 716.146833] usb-storage: Attempting to get CSW...
[ 716.146838] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 716.148782] usb-storage: Status code 0; transferred 13/13
[ 716.148786] usb-storage: -- transfer complete
[ 716.148790] usb-storage: Bulk status result = 0
[ 716.148795] usb-storage: Bulk Status S 0x53425355 T 0xc3d R 0 Stat 0x0
[ 716.148800] usb-storage: scsi cmd done, result=0x0
[ 716.148807] usb-storage: *** thread sleeping.
[ 716.148892] usb-storage: queuecommand called
[ 716.148903] usb-storage: *** thread awakened.
[ 716.148908] usb-storage: Command WRITE_10 (10 bytes)
[ 716.148912] usb-storage: 2a 00 00 74 35 a7 00 00 08 00
[ 716.148931] usb-storage: Bulk Command S 0x43425355 T 0xc3e L 4096 F 0 Trg 0 LUN 0 CL 10
[ 716.148936] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 716.149805] usb-storage: Status code 0; transferred 31/31
[ 716.149811] usb-storage: -- transfer complete
[ 716.149815] usb-storage: Bulk command transfer result=0
[ 716.149821] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 716.156820] usb-storage: Status code 0; transferred 4096/4096
[ 716.156825] usb-storage: -- transfer complete
[ 716.156829] usb-storage: Bulk data transfer result 0x0
[ 716.156833] usb-storage: Attempting to get CSW...
[ 716.156838] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 716.157802] usb-storage: Status code 0; transferred 13/13
[ 716.157806] usb-storage: -- transfer complete
[ 716.157810] usb-storage: Bulk status result = 0
[ 716.157815] usb-storage: Bulk Status S 0x53425355 T 0xc3e R 0 Stat 0x0
[ 716.157820] usb-storage: scsi cmd done, result=0x0
[ 716.157827] usb-storage: *** thread sleeping.
[ 730.010050] usb-storage: queuecommand called
[ 730.010082] usb-storage: *** thread awakened.
[ 730.010090] usb-storage: Command WRITE_10 (10 bytes)
[ 730.010094] usb-storage: 2a 00 00 b9 1f 6f 00 00 48 00
[ 730.010114] usb-storage: Bulk Command S 0x43425355 T 0xc3f L 36864 F 0 Trg 0 LUN 0 CL 10
[ 730.010120] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 730.011785] usb-storage: Status code 0; transferred 31/31
[ 730.011790] usb-storage: -- transfer complete
[ 730.011794] usb-storage: Bulk command transfer result=0
[ 730.011799] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 730.209835] usb-storage: Status code 0; transferred 36864/36864
[ 730.209841] usb-storage: -- transfer complete
[ 730.209845] usb-storage: Bulk data transfer result 0x0
[ 730.209850] usb-storage: Attempting to get CSW...
[ 730.209855] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 730.234791] usb-storage: Status code 0; transferred 13/13
[ 730.234796] usb-storage: -- transfer complete
[ 730.234800] usb-storage: Bulk status result = 0
[ 730.234806] usb-storage: Bulk Status S 0x53425355 T 0xc3f R 0 Stat 0x0
[ 730.234811] usb-storage: scsi cmd done, result=0x0
[ 730.234818] usb-storage: *** thread sleeping.
[ 730.234861] usb-storage: queuecommand called
[ 730.234871] usb-storage: *** thread awakened.
[ 730.234877] usb-storage: Command WRITE_10 (10 bytes)
[ 730.234881] usb-storage: 2a 00 00 74 35 af 00 00 48 00
[ 730.234899] usb-storage: Bulk Command S 0x43425355 T 0xc40 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 730.234905] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 730.235794] usb-storage: Status code 0; transferred 31/31
[ 730.235799] usb-storage: -- transfer complete
[ 730.235804] usb-storage: Bulk command transfer result=0
[ 730.235810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 730.392821] usb-storage: Status code 0; transferred 36864/36864
[ 730.392826] usb-storage: -- transfer complete
[ 730.392830] usb-storage: Bulk data transfer result 0x0
[ 730.392834] usb-storage: Attempting to get CSW...
[ 730.392839] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 730.417806] usb-storage: Status code 0; transferred 13/13
[ 730.417810] usb-storage: -- transfer complete
[ 730.417814] usb-storage: Bulk status result = 0
[ 730.417820] usb-storage: Bulk Status S 0x53425355 T 0xc40 R 0 Stat 0x0
[ 730.417825] usb-storage: scsi cmd done, result=0x0
[ 730.417831] usb-storage: *** thread sleeping.
[ 730.417912] usb-storage: queuecommand called
[ 730.417923] usb-storage: *** thread awakened.
[ 730.417928] usb-storage: Command WRITE_10 (10 bytes)
[ 730.417932] usb-storage: 2a 00 00 74 35 f7 00 00 08 00
[ 730.417950] usb-storage: Bulk Command S 0x43425355 T 0xc41 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 730.417956] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 730.418787] usb-storage: Status code 0; transferred 31/31
[ 730.418792] usb-storage: -- transfer complete
[ 730.418796] usb-storage: Bulk command transfer result=0
[ 730.418802] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 730.424802] usb-storage: Status code 0; transferred 4096/4096
[ 730.424807] usb-storage: -- transfer complete
[ 730.424811] usb-storage: Bulk data transfer result 0x0
[ 730.424816] usb-storage: Attempting to get CSW...
[ 730.424821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 730.425784] usb-storage: Status code 0; transferred 13/13
[ 730.425789] usb-storage: -- transfer complete
[ 730.425793] usb-storage: Bulk status result = 0
[ 730.425799] usb-storage: Bulk Status S 0x53425355 T 0xc41 R 0 Stat 0x0
[ 730.425804] usb-storage: scsi cmd done, result=0x0
[ 730.425810] usb-storage: *** thread sleeping.
[-- Attachment #15: vista-wireless-connection.jpg --]
[-- Type: image/jpeg, Size: 43059 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread![[-- Attachment #15: vista-wireless-connection.jpg --] [-- Type: image/jpeg, Size: 43059 bytes --]](../../3b0e19890909140905g4c6bfef3t38cd94a205d26f8@mail.gmail.com/15-vista-wireless-connection.jpg){kind=link}