* Prism54/p54pci
@ 2009-10-07 21:00 James Grossmann
2009-10-08 16:28 ` Prism54/p54pci Larry Finger
[not found] ` <200911021611.37354.chunkeey@googlemail.com>
0 siblings, 2 replies; 21+ messages in thread
From: James Grossmann @ 2009-10-07 21:00 UTC (permalink / raw)
To: linux-wireless
I have the gigafast WF728-AEX, which doesn't seem to work with the
p54pci drivers, I was previously using it with my Thinkpad T23 under
Gentoo (gentoo kernels 2.6.29 and 2.6.30), and could only use the
1.0.4.3 firmware, now, I am using it under Ubuntu 9.04
(2.6.28-15-generic kernel) on the same computer, and find that I have
to load the prism54 driver to make it work.
I noticed that you were considering this to be depricated, I hope that
you can help me to make p54pci work!
Thanks
James
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: Prism54/p54pci 2009-10-07 21:00 Prism54/p54pci James Grossmann @ 2009-10-08 16:28 ` Larry Finger 2009-10-27 18:37 ` Prism54/p54pci Luis R. Rodriguez [not found] ` <200911021611.37354.chunkeey@googlemail.com> 1 sibling, 1 reply; 21+ messages in thread From: Larry Finger @ 2009-10-08 16:28 UTC (permalink / raw) To: James Grossmann; +Cc: linux-wireless On 10/07/2009 04:00 PM, James Grossmann wrote: > I have the gigafast WF728-AEX, which doesn't seem to work with the > p54pci drivers, I was previously using it with my Thinkpad T23 under > Gentoo (gentoo kernels 2.6.29 and 2.6.30), and could only use the > 1.0.4.3 firmware, now, I am using it under Ubuntu 9.04 > (2.6.28-15-generic kernel) on the same computer, and find that I have > to load the prism54 driver to make it work. > I noticed that you were considering this to be depricated, I hope that > you can help me to make p54pci work! As it works with 2.6.29 and 2.6.30 kernels, but not with 2.6.28, it seems likely that you need a later version of the driver. Does Ubuntu have a package for compat-wireless? If so, install it. If not, you will need to install from source. Larry ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-10-08 16:28 ` Prism54/p54pci Larry Finger @ 2009-10-27 18:37 ` Luis R. Rodriguez [not found] ` <167ae39b0910310615k5475e5cp55d1c0d60e7a443b@mail.gmail.com> 0 siblings, 1 reply; 21+ messages in thread From: Luis R. Rodriguez @ 2009-10-27 18:37 UTC (permalink / raw) To: Larry Finger, John W. Linville; +Cc: James Grossmann, linux-wireless On Thu, Oct 8, 2009 at 9:28 AM, Larry Finger <Larry.Finger@lwfinger.net> wrote: > On 10/07/2009 04:00 PM, James Grossmann wrote: >> >> I have the gigafast WF728-AEX, which doesn't seem to work with the >> p54pci drivers, I was previously using it with my Thinkpad T23 under >> Gentoo (gentoo kernels 2.6.29 and 2.6.30), and could only use the >> 1.0.4.3 firmware, now, I am using it under Ubuntu 9.04 >> (2.6.28-15-generic kernel) on the same computer, and find that I have >> to load the prism54 driver to make it work. >> I noticed that you were considering this to be depricated, I hope that >> you can help me to make p54pci work! > > As it works with 2.6.29 and 2.6.30 kernels, but not with 2.6.28, it seems > likely that you need a later version of the driver. Does Ubuntu have a > package for compat-wireless? If so, install it. If not, you will need to > install from source. James, please do test with a new driver and appropriate firmware and let us know if it worked or not. Luis ^ permalink raw reply [flat|nested] 21+ messages in thread
[parent not found: <167ae39b0910310615k5475e5cp55d1c0d60e7a443b@mail.gmail.com>]
* Re: Prism54/p54pci [not found] ` <167ae39b0910310615k5475e5cp55d1c0d60e7a443b@mail.gmail.com> @ 2009-10-31 13:26 ` Luis R. Rodriguez 2009-10-31 14:11 ` Prism54/p54pci James Grossmann 0 siblings, 1 reply; 21+ messages in thread From: Luis R. Rodriguez @ 2009-10-31 13:26 UTC (permalink / raw) To: James Grossmann Cc: linux-wireless, John W. Linville, Larry Finger, Christian Lamparter Please keep the CC list here. This type of report is rare and we need it archived. Please try using wireless-testing or compat-wireless: http://wireless.kernel.org/en/users/Download Luis On Sat, Oct 31, 2009 at 6:15 AM, James Grossmann <cctsurf@gmail.com> wrote: > Attempted under Ubuntu 9.10, using their kernel 2.6.31-14-generic. > Unfortunately it still does not work, is it possible to load the > fullmac firmware through p54pci? just a thought... > Here's my relevant dmesg: > [ 15.369250] pcmcia_socket pcmcia_socket0: cs: IO port probe > 0x100-0x3af: clean. > [ 15.370157] pcmcia_socket pcmcia_socket0: cs: IO port probe > 0x3e0-0x4ff: excluding 0x4d0-0x4d7 > [ 15.370585] pcmcia_socket pcmcia_socket0: cs: IO port probe > 0x820-0x8ff: clean. > [ 15.370956] pcmcia_socket pcmcia_socket0: cs: IO port probe > 0xc00-0xcf7: clean. > [ 15.371596] pcmcia_socket pcmcia_socket0: cs: IO port probe > 0xa00-0xaff: clean. > [ 15.776624] p54pci 0000:03:00.0: enabling device (0000 -> 0002) > [ 15.776653] p54pci 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 > (level, low) -> IRQ 11 > [ 15.776675] p54pci 0000:03:00.0: setting latency timer to 64 > [ 15.776789] p54pci 0000:03:00.0: firmware: requesting isl3886pci > [ 15.916240] cfg80211: World regulatory domain updated: > [ 15.916252] (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 15.916260] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 15.916267] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 15.916274] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 15.916280] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 15.916287] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 16.048573] phy0: p54 detected a LM86 firmware > [ 16.048582] p54: rx_mtu reduced from 3240 to 2376 > [ 16.048588] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 > [ 16.048594] phy0: cryptographic accelerator WEP:YES, TKIP:YES, > CCMP:YES > [ 16.328427] Intel ICH 0000:00:1f.5: enabling device (0000 -> 0001) > [ 16.328448] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI > 11 (level, low) -> IRQ 11 > [ 16.328477] Intel ICH 0000:00:1f.5: setting latency timer to 64 > [ 16.917291] phy0: hwaddr 00:xx:xx:xx:xx:xx, MAC:isl3880 RF:Frisbee > [ 17.140101] intel8x0_measure_ac97_clock: measured 52127 usecs (2506 > samples) > [ 17.140111] intel8x0: clocking to 48000 > [ 17.265086] phy0: Selected rate control algorithm 'minstrel' > [ 17.266862] Registered led device: p54-phy0::assoc > [ 17.266906] Registered led device: p54-phy0::tx > [ 17.266951] Registered led device: p54-phy0::rx > [ 17.266992] Registered led device: p54-phy0::radio > [ 17.267007] p54pci 0000:03:00.0: is registered as 'phy0' > [ 17.292918] udev: renamed network interface wlan0 to wlan1 > [ 30.512797] EXT3 FS on sda5, internal journal > [ 31.876640] kjournald starting. Commit interval 5 seconds > [ 31.876989] EXT3 FS on sda7, internal journal > [ 31.877000] EXT3-fs: mounted filesystem with writeback data mode. > [ 32.829400] type=1505 audit(1256993753.257:9): > operation="profile_replace" pid=853 name=/sbin/dhclient3 > [ 32.830401] type=1505 audit(1256993753.257:10): > operation="profile_replace" pid=853 > name=/usr/lib/NetworkManager/nm-dhcp-client.action > [ 32.830965] type=1505 audit(1256993753.257:11): > operation="profile_replace" pid=853 > name=/usr/lib/connman/scripts/dhclient-script > [ 32.837982] type=1505 audit(1256993753.265:12): > operation="profile_replace" pid=855 > name=/usr/lib/cups/backend/cups-pdf > [ 32.839224] type=1505 audit(1256993753.265:13): > operation="profile_replace" pid=855 name=/usr/sbin/cupsd > [ 32.844175] type=1505 audit(1256993753.273:14): > operation="profile_replace" pid=856 name=/usr/sbin/mysqld-akonadi > [ 32.847992] type=1505 audit(1256993753.273:15): > operation="profile_replace" pid=857 name=/usr/sbin/tcpdump > [ 37.182116] RPC: Registered udp transport module. > [ 37.182124] RPC: Registered tcp transport module. > [ 37.410106] Installing knfsd (copyright (C) 1996 > okir@monad.swb.de). > [ 40.921453] svc: failed to register lockdv1 RPC service (errno 97). > [ 40.923471] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state > recovery directory > [ 40.988229] NFSD: starting 90-second grace period > [ 41.914184] ADDRCONF(NETDEV_UP): wlan1: link is not ready > [ 41.938395] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 42.970111] [drm] Initialized drm 1.1.0 20060810 > [ 42.978943] pci 0000:01:00.0: power state changed by ACPI to D0 > [ 42.978965] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 > (level, low) -> IRQ 11 > [ 42.979601] [drm] Initialized savage 2.4.1 20050313 for > 0000:01:00.0 on minor 0 > [ 43.052134] phy0: frequency change failed > [ 43.052155] phy0: frequency change failed > [ 43.052163] phy0: frequency change failed > [ 43.052170] phy0: frequency change failed > [ 43.052177] phy0: frequency change failed > [ 43.116051] phy0: frequency change failed > [ 43.116070] phy0: frequency change failed > [ 43.116077] phy0: frequency change failed > [ 43.116085] phy0: frequency change failed > [ 43.116092] phy0: frequency change failed > [ 63.664124] phy0: frequency change failed > [ 63.664154] phy0: frequency change failed > [ 63.664162] phy0: frequency change failed > [ 63.664170] phy0: frequency change failed > [ 63.664177] phy0: frequency change failed > [ 63.724148] phy0: frequency change failed > [ 63.724174] phy0: frequency change failed > [ 63.724182] phy0: frequency change failed > [ 63.724189] phy0: frequency change failed > [ 63.724197] phy0: frequency change failed > [ 69.288818] ondemand governor failed, too long transition latency > of HW, fallback to performance governor > [ 93.668072] phy0: frequency change failed > [ 93.668093] phy0: frequency change failed > [ 93.668101] phy0: frequency change failed > [ 93.668108] phy0: frequency change failed > [ 93.668115] phy0: frequency change failed > [ 93.724065] phy0: frequency change failed > [ 93.724086] phy0: frequency change failed > [ 93.724094] phy0: frequency change failed > [ 93.724101] phy0: frequency change failed > [ 93.724108] phy0: frequency change failed > [ 109.068537] ondemand governor failed, too long transition latency > of HW, fallback to performance governor > [ 115.912103] phy0: frequency change failed > [ 115.912120] phy0: frequency change failed > [ 115.912128] phy0: frequency change failed > [ 115.912135] phy0: frequency change failed > [ 115.912142] phy0: frequency change failed > [ 115.968099] phy0: frequency change failed > [ 115.968112] phy0: frequency change failed > [ 115.968120] phy0: frequency change failed > [ 115.968127] phy0: frequency change failed > [ 115.968134] phy0: frequency change failed > [ 116.368824] phy0: frequency change failed > [ 116.371618] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx try 1 > [ 116.568114] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx try 2 > [ 116.769380] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx try 3 > [ 116.968120] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx timed out > [ 121.456176] phy0: frequency change failed > [ 121.456193] phy0: frequency change failed > [ 121.456201] phy0: frequency change failed > [ 121.456208] phy0: frequency change failed > [ 121.456215] phy0: frequency change failed > [ 121.512156] phy0: frequency change failed > [ 121.512169] phy0: frequency change failed > [ 121.512177] phy0: frequency change failed > [ 121.512184] phy0: frequency change failed > [ 121.512191] phy0: frequency change failed > [ 121.912200] phy0: frequency change failed > [ 121.915107] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx > [ 122.112177] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx > [ 122.312156] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx > [ 122.512154] wlan1: authentication with AP 00:xx:xx:xx:xx:xx timed > out > [ 127.000168] phy0: frequency change failed > [ 127.000184] phy0: frequency change failed > [ 127.000192] phy0: frequency change failed > [ 127.000199] phy0: frequency change failed > [ 127.000206] phy0: frequency change failed > [ 127.056164] phy0: frequency change failed > [ 127.056173] phy0: frequency change failed > [ 127.056181] phy0: frequency change failed > [ 127.056188] phy0: frequency change failed > [ 127.056195] phy0: frequency change failed > [ 127.460382] phy0: frequency change failed > > and it continues like that until I remove the module. > > > On Tue, Oct 27, 2009 at 1:37 PM, Luis R. Rodriguez <mcgrof@gmail.com> wrote: >> On Thu, Oct 8, 2009 at 9:28 AM, Larry Finger <Larry.Finger@lwfinger.net> wrote: >>> On 10/07/2009 04:00 PM, James Grossmann wrote: >>>> >>>> I have the gigafast WF728-AEX, which doesn't seem to work with the >>>> p54pci drivers, I was previously using it with my Thinkpad T23 under >>>> Gentoo (gentoo kernels 2.6.29 and 2.6.30), and could only use the >>>> 1.0.4.3 firmware, now, I am using it under Ubuntu 9.04 >>>> (2.6.28-15-generic kernel) on the same computer, and find that I have >>>> to load the prism54 driver to make it work. >>>> I noticed that you were considering this to be depricated, I hope that >>>> you can help me to make p54pci work! >>> >>> As it works with 2.6.29 and 2.6.30 kernels, but not with 2.6.28, it seems >>> likely that you need a later version of the driver. Does Ubuntu have a >>> package for compat-wireless? If so, install it. If not, you will need to >>> install from source. >> >> James, please do test with a new driver and appropriate firmware and >> let us know if it worked or not. >> >> Luis >> > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-10-31 13:26 ` Prism54/p54pci Luis R. Rodriguez @ 2009-10-31 14:11 ` James Grossmann 2009-10-31 21:24 ` Prism54/p54pci Christian Lamparter 0 siblings, 1 reply; 21+ messages in thread From: James Grossmann @ 2009-10-31 14:11 UTC (permalink / raw) To: Luis R. Rodriguez Cc: linux-wireless, John W. Linville, Larry Finger, Christian Lamparter No help with the compat drivers: [ 4185.320334] Unloaded prism54 driver [ 4200.794299] cfg80211: Calling CRDA to update world regulatory domain [ 4200.857330] p54pci 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 4200.857408] p54pci 0000:03:00.0: firmware: requesting isl3886pci [ 4201.432596] phy0: p54 detected a LM86 firmware [ 4201.432604] p54: rx_mtu reduced from 3240 to 2376 [ 4201.432610] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 [ 4201.432616] phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 4201.661701] cfg80211: World regulatory domain updated: [ 4201.661710] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4201.661718] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4201.661724] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4201.661731] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4201.661738] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4201.661745] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4202.293254] phy0: EEPROM is damaged... you may not be ableto use all channels with this device. [ 4202.293286] phy0: [iqauto calibration data] is/are missing for channel:2 [2417 MHz]. [ 4202.293293] phy0: [iqauto calibration data] is/are missing for channel:3 [2422 MHz]. [ 4202.293300] phy0: [iqauto calibration data] is/are missing for channel:4 [2427 MHz]. [ 4202.293306] phy0: [iqauto calibration data] is/are missing for channel:5 [2432 MHz]. [ 4202.293313] phy0: [iqauto calibration data] is/are missing for channel:6 [2437 MHz]. [ 4202.293320] phy0: [iqauto calibration data] is/are missing for channel:8 [2447 MHz]. [ 4202.293326] phy0: [iqauto calibration data] is/are missing for channel:9 [2452 MHz]. [ 4202.293333] phy0: [iqauto calibration data] is/are missing for channel:10 [2457 MHz]. [ 4202.293340] phy0: [iqauto calibration data] is/are missing for channel:11 [2462 MHz]. [ 4202.293346] phy0: [iqauto calibration data] is/are missing for channel:12 [2467 MHz]. [ 4202.293356] phy0: hwaddr 00:xx:xx:xx:xx:xx, MAC:isl3880 RF:Frisbee [ 4202.293787] phy0: Selected rate control algorithm 'minstrel' [ 4202.295616] Registered led device: p54-phy0::assoc [ 4202.295657] Registered led device: p54-phy0::tx [ 4202.295703] Registered led device: p54-phy0::rx [ 4202.295744] Registered led device: p54-phy0::radio [ 4202.295758] p54pci 0000:03:00.0: is registered as 'phy0' [ 4202.378618] udev: renamed network interface wlan0 to wlan1 [ 4202.509483] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 4202.724125] phy0: frequency change to channel 2 failed. [ 4202.724138] phy0: frequency change to channel 3 failed. [ 4202.724145] phy0: frequency change to channel 4 failed. [ 4202.724151] phy0: frequency change to channel 5 failed. [ 4202.724157] phy0: frequency change to channel 6 failed. [ 4202.780179] phy0: frequency change to channel 8 failed. [ 4202.780193] phy0: frequency change to channel 9 failed. [ 4202.780199] phy0: frequency change to channel 10 failed. [ 4202.780206] phy0: frequency change to channel 11 failed. [ 4202.780212] phy0: frequency change to channel 12 failed. [ 4208.212168] phy0: frequency change to channel 2 failed. [ 4208.212180] phy0: frequency change to channel 3 failed. [ 4208.212187] phy0: frequency change to channel 4 failed. [ 4208.212193] phy0: frequency change to channel 5 failed. [ 4208.212199] phy0: frequency change to channel 6 failed. [ 4208.276097] phy0: frequency change to channel 8 failed. [ 4208.276112] phy0: frequency change to channel 9 failed. [ 4208.276119] phy0: frequency change to channel 10 failed. [ 4208.276125] phy0: frequency change to channel 11 failed. [ 4208.276132] phy0: frequency change to channel 12 failed. [ 4208.524788] phy0: frequency change to channel 6 failed. [ 4208.524949] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local choice (reason=3) [ 4208.525084] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) [ 4208.724191] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 2) [ 4208.924197] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 3) [ 4209.124181] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx timed out [ 4213.712173] phy0: frequency change to channel 2 failed. [ 4213.712186] phy0: frequency change to channel 3 failed. [ 4213.712193] phy0: frequency change to channel 4 failed. [ 4213.712199] phy0: frequency change to channel 5 failed. [ 4213.712205] phy0: frequency change to channel 6 failed. [ 4213.768179] phy0: frequency change to channel 8 failed. [ 4213.768193] phy0: frequency change to channel 9 failed. [ 4213.768199] phy0: frequency change to channel 10 failed. [ 4213.768206] phy0: frequency change to channel 11 failed. [ 4213.768212] phy0: frequency change to channel 12 failed. [ 4214.016190] phy0: frequency change to channel 6 failed. [ 4214.016941] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) [ 4214.217439] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 2) [ 4214.416177] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 3) [ 4214.616183] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx timed out On Sat, Oct 31, 2009 at 8:26 AM, Luis R. Rodriguez <mcgrof@gmail.com> wrote: > Please keep the CC list here. This type of report is rare and we need > it archived. Please try using wireless-testing or compat-wireless: > > http://wireless.kernel.org/en/users/Download > > Luis > > On Sat, Oct 31, 2009 at 6:15 AM, James Grossmann <cctsurf@gmail.com> wrote: >> Attempted under Ubuntu 9.10, using their kernel 2.6.31-14-generic. >> Unfortunately it still does not work, is it possible to load the >> fullmac firmware through p54pci? just a thought... >> Here's my relevant dmesg: >> [ 15.369250] pcmcia_socket pcmcia_socket0: cs: IO port probe >> 0x100-0x3af: clean. >> [ 15.370157] pcmcia_socket pcmcia_socket0: cs: IO port probe >> 0x3e0-0x4ff: excluding 0x4d0-0x4d7 >> [ 15.370585] pcmcia_socket pcmcia_socket0: cs: IO port probe >> 0x820-0x8ff: clean. >> [ 15.370956] pcmcia_socket pcmcia_socket0: cs: IO port probe >> 0xc00-0xcf7: clean. >> [ 15.371596] pcmcia_socket pcmcia_socket0: cs: IO port probe >> 0xa00-0xaff: clean. >> [ 15.776624] p54pci 0000:03:00.0: enabling device (0000 -> 0002) >> [ 15.776653] p54pci 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 >> (level, low) -> IRQ 11 >> [ 15.776675] p54pci 0000:03:00.0: setting latency timer to 64 >> [ 15.776789] p54pci 0000:03:00.0: firmware: requesting isl3886pci >> [ 15.916240] cfg80211: World regulatory domain updated: >> [ 15.916252] (start_freq - end_freq @ bandwidth), >> (max_antenna_gain, max_eirp) >> [ 15.916260] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, >> 2000 mBm) >> [ 15.916267] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, >> 2000 mBm) >> [ 15.916274] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, >> 2000 mBm) >> [ 15.916280] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, >> 2000 mBm) >> [ 15.916287] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, >> 2000 mBm) >> [ 16.048573] phy0: p54 detected a LM86 firmware >> [ 16.048582] p54: rx_mtu reduced from 3240 to 2376 >> [ 16.048588] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 >> [ 16.048594] phy0: cryptographic accelerator WEP:YES, TKIP:YES, >> CCMP:YES >> [ 16.328427] Intel ICH 0000:00:1f.5: enabling device (0000 -> 0001) >> [ 16.328448] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI >> 11 (level, low) -> IRQ 11 >> [ 16.328477] Intel ICH 0000:00:1f.5: setting latency timer to 64 >> [ 16.917291] phy0: hwaddr 00:xx:xx:xx:xx:xx, MAC:isl3880 RF:Frisbee >> [ 17.140101] intel8x0_measure_ac97_clock: measured 52127 usecs (2506 >> samples) >> [ 17.140111] intel8x0: clocking to 48000 >> [ 17.265086] phy0: Selected rate control algorithm 'minstrel' >> [ 17.266862] Registered led device: p54-phy0::assoc >> [ 17.266906] Registered led device: p54-phy0::tx >> [ 17.266951] Registered led device: p54-phy0::rx >> [ 17.266992] Registered led device: p54-phy0::radio >> [ 17.267007] p54pci 0000:03:00.0: is registered as 'phy0' >> [ 17.292918] udev: renamed network interface wlan0 to wlan1 >> [ 30.512797] EXT3 FS on sda5, internal journal >> [ 31.876640] kjournald starting. Commit interval 5 seconds >> [ 31.876989] EXT3 FS on sda7, internal journal >> [ 31.877000] EXT3-fs: mounted filesystem with writeback data mode. >> [ 32.829400] type=1505 audit(1256993753.257:9): >> operation="profile_replace" pid=853 name=/sbin/dhclient3 >> [ 32.830401] type=1505 audit(1256993753.257:10): >> operation="profile_replace" pid=853 >> name=/usr/lib/NetworkManager/nm-dhcp-client.action >> [ 32.830965] type=1505 audit(1256993753.257:11): >> operation="profile_replace" pid=853 >> name=/usr/lib/connman/scripts/dhclient-script >> [ 32.837982] type=1505 audit(1256993753.265:12): >> operation="profile_replace" pid=855 >> name=/usr/lib/cups/backend/cups-pdf >> [ 32.839224] type=1505 audit(1256993753.265:13): >> operation="profile_replace" pid=855 name=/usr/sbin/cupsd >> [ 32.844175] type=1505 audit(1256993753.273:14): >> operation="profile_replace" pid=856 name=/usr/sbin/mysqld-akonadi >> [ 32.847992] type=1505 audit(1256993753.273:15): >> operation="profile_replace" pid=857 name=/usr/sbin/tcpdump >> [ 37.182116] RPC: Registered udp transport module. >> [ 37.182124] RPC: Registered tcp transport module. >> [ 37.410106] Installing knfsd (copyright (C) 1996 >> okir@monad.swb.de). >> [ 40.921453] svc: failed to register lockdv1 RPC service (errno 97). >> [ 40.923471] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state >> recovery directory >> [ 40.988229] NFSD: starting 90-second grace period >> [ 41.914184] ADDRCONF(NETDEV_UP): wlan1: link is not ready >> [ 41.938395] ADDRCONF(NETDEV_UP): eth0: link is not ready >> [ 42.970111] [drm] Initialized drm 1.1.0 20060810 >> [ 42.978943] pci 0000:01:00.0: power state changed by ACPI to D0 >> [ 42.978965] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 >> (level, low) -> IRQ 11 >> [ 42.979601] [drm] Initialized savage 2.4.1 20050313 for >> 0000:01:00.0 on minor 0 >> [ 43.052134] phy0: frequency change failed >> [ 43.052155] phy0: frequency change failed >> [ 43.052163] phy0: frequency change failed >> [ 43.052170] phy0: frequency change failed >> [ 43.052177] phy0: frequency change failed >> [ 43.116051] phy0: frequency change failed >> [ 43.116070] phy0: frequency change failed >> [ 43.116077] phy0: frequency change failed >> [ 43.116085] phy0: frequency change failed >> [ 43.116092] phy0: frequency change failed >> [ 63.664124] phy0: frequency change failed >> [ 63.664154] phy0: frequency change failed >> [ 63.664162] phy0: frequency change failed >> [ 63.664170] phy0: frequency change failed >> [ 63.664177] phy0: frequency change failed >> [ 63.724148] phy0: frequency change failed >> [ 63.724174] phy0: frequency change failed >> [ 63.724182] phy0: frequency change failed >> [ 63.724189] phy0: frequency change failed >> [ 63.724197] phy0: frequency change failed >> [ 69.288818] ondemand governor failed, too long transition latency >> of HW, fallback to performance governor >> [ 93.668072] phy0: frequency change failed >> [ 93.668093] phy0: frequency change failed >> [ 93.668101] phy0: frequency change failed >> [ 93.668108] phy0: frequency change failed >> [ 93.668115] phy0: frequency change failed >> [ 93.724065] phy0: frequency change failed >> [ 93.724086] phy0: frequency change failed >> [ 93.724094] phy0: frequency change failed >> [ 93.724101] phy0: frequency change failed >> [ 93.724108] phy0: frequency change failed >> [ 109.068537] ondemand governor failed, too long transition latency >> of HW, fallback to performance governor >> [ 115.912103] phy0: frequency change failed >> [ 115.912120] phy0: frequency change failed >> [ 115.912128] phy0: frequency change failed >> [ 115.912135] phy0: frequency change failed >> [ 115.912142] phy0: frequency change failed >> [ 115.968099] phy0: frequency change failed >> [ 115.968112] phy0: frequency change failed >> [ 115.968120] phy0: frequency change failed >> [ 115.968127] phy0: frequency change failed >> [ 115.968134] phy0: frequency change failed >> [ 116.368824] phy0: frequency change failed >> [ 116.371618] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx try 1 >> [ 116.568114] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx try 2 >> [ 116.769380] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx try 3 >> [ 116.968120] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx timed out >> [ 121.456176] phy0: frequency change failed >> [ 121.456193] phy0: frequency change failed >> [ 121.456201] phy0: frequency change failed >> [ 121.456208] phy0: frequency change failed >> [ 121.456215] phy0: frequency change failed >> [ 121.512156] phy0: frequency change failed >> [ 121.512169] phy0: frequency change failed >> [ 121.512177] phy0: frequency change failed >> [ 121.512184] phy0: frequency change failed >> [ 121.512191] phy0: frequency change failed >> [ 121.912200] phy0: frequency change failed >> [ 121.915107] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx >> [ 122.112177] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx >> [ 122.312156] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx >> [ 122.512154] wlan1: authentication with AP 00:xx:xx:xx:xx:xx timed >> out >> [ 127.000168] phy0: frequency change failed >> [ 127.000184] phy0: frequency change failed >> [ 127.000192] phy0: frequency change failed >> [ 127.000199] phy0: frequency change failed >> [ 127.000206] phy0: frequency change failed >> [ 127.056164] phy0: frequency change failed >> [ 127.056173] phy0: frequency change failed >> [ 127.056181] phy0: frequency change failed >> [ 127.056188] phy0: frequency change failed >> [ 127.056195] phy0: frequency change failed >> [ 127.460382] phy0: frequency change failed >> >> and it continues like that until I remove the module. >> >> >> On Tue, Oct 27, 2009 at 1:37 PM, Luis R. Rodriguez <mcgrof@gmail.com> wrote: >>> On Thu, Oct 8, 2009 at 9:28 AM, Larry Finger <Larry.Finger@lwfinger.net> wrote: >>>> On 10/07/2009 04:00 PM, James Grossmann wrote: >>>>> >>>>> I have the gigafast WF728-AEX, which doesn't seem to work with the >>>>> p54pci drivers, I was previously using it with my Thinkpad T23 under >>>>> Gentoo (gentoo kernels 2.6.29 and 2.6.30), and could only use the >>>>> 1.0.4.3 firmware, now, I am using it under Ubuntu 9.04 >>>>> (2.6.28-15-generic kernel) on the same computer, and find that I have >>>>> to load the prism54 driver to make it work. >>>>> I noticed that you were considering this to be depricated, I hope that >>>>> you can help me to make p54pci work! >>>> >>>> As it works with 2.6.29 and 2.6.30 kernels, but not with 2.6.28, it seems >>>> likely that you need a later version of the driver. Does Ubuntu have a >>>> package for compat-wireless? If so, install it. If not, you will need to >>>> install from source. >>> >>> James, please do test with a new driver and appropriate firmware and >>> let us know if it worked or not. >>> >>> Luis >>> >> > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-10-31 14:11 ` Prism54/p54pci James Grossmann @ 2009-10-31 21:24 ` Christian Lamparter 2009-11-02 5:07 ` Prism54/p54pci James Grossmann 0 siblings, 1 reply; 21+ messages in thread From: Christian Lamparter @ 2009-10-31 21:24 UTC (permalink / raw) To: James Grossmann Cc: Luis R. Rodriguez, linux-wireless, John W. Linville, Larry Finger, Christian Lamparter [-- Attachment #1: Type: text/plain, Size: 3950 bytes --] On Saturday 31 October 2009 15:11:37 James Grossmann wrote: > [ 4200.794299] cfg80211: Calling CRDA to update world regulatory > domain > [ 4200.857330] p54pci 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 > (level, low) -> IRQ 11 > [ 4200.857408] p54pci 0000:03:00.0: firmware: requesting isl3886pci > [ 4201.432596] phy0: p54 detected a LM86 firmware > [ 4201.432604] p54: rx_mtu reduced from 3240 to 2376 > [ 4201.432610] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 > [ 4201.432616] phy0: cryptographic accelerator WEP:YES, TKIP:YES, > CCMP:YES > [ 4202.293254] phy0: EEPROM is damaged... you may not be able to use > all channels with this device. ^^^ = that's the culprit. do you think, you can get this EEPROM dump? Just move the attach _patch_ into your compat-wireless' main directory. Afterward, you have to execute: patch -p1 < p54-dump-eeprom-to-dmesg.diff and rebuild & reload the driver and retrieve the data from dmesg. > [ 4202.293286] phy0: [iqauto calibration data] is/are missing for > channel:2 [2417 MHz]. > [ 4202.293293] phy0: [iqauto calibration data] is/are missing for > channel:3 [2422 MHz]. > [ 4202.293300] phy0: [iqauto calibration data] is/are missing for > channel:4 [2427 MHz]. > [ 4202.293306] phy0: [iqauto calibration data] is/are missing for > channel:5 [2432 MHz]. > [ 4202.293313] phy0: [iqauto calibration data] is/are missing for > channel:6 [2437 MHz]. > [ 4202.293320] phy0: [iqauto calibration data] is/are missing for > channel:8 [2447 MHz]. > [ 4202.293326] phy0: [iqauto calibration data] is/are missing for > channel:9 [2452 MHz]. > [ 4202.293333] phy0: [iqauto calibration data] is/are missing for > channel:10 [2457 MHz]. > [ 4202.293340] phy0: [iqauto calibration data] is/are missing for > channel:11 [2462 MHz]. > [ 4202.293346] phy0: [iqauto calibration data] is/are missing for > channel:12 [2467 MHz]. > [ 4202.293356] phy0: hwaddr 00:xx:xx:xx:xx:xx, MAC:isl3880 RF:Frisbee > [ 4202.293787] phy0: Selected rate control algorithm 'minstrel' > [ 4202.295616] Registered led device: p54-phy0::assoc > [ 4202.295657] Registered led device: p54-phy0::tx > [ 4202.295703] Registered led device: p54-phy0::rx > [ 4202.295744] Registered led device: p54-phy0::radio > [ 4202.295758] p54pci 0000:03:00.0: is registered as 'phy0' > [ 4202.378618] udev: renamed network interface wlan0 to wlan1 > [ 4202.509483] ADDRCONF(NETDEV_UP): wlan1: link is not ready > [ 4202.724125] phy0: frequency change to channel 2 failed. > [ 4202.724138] phy0: frequency change to channel 3 failed. > [ 4202.724145] phy0: frequency change to channel 4 failed. > [ 4202.724151] phy0: frequency change to channel 5 failed. > [ 4202.724157] phy0: frequency change to channel 6 failed. > [ 4202.780179] phy0: frequency change to channel 8 failed. > [ 4202.780193] phy0: frequency change to channel 9 failed. > [ 4202.780199] phy0: frequency change to channel 10 failed. > [ 4202.780206] phy0: frequency change to channel 11 failed. > [ 4202.780212] phy0: frequency change to channel 12 failed. > [ 4208.212168] phy0: frequency change to channel 2 failed. > [ 4208.212180] phy0: frequency change to channel 3 failed. > [ 4208.212187] phy0: frequency change to channel 4 failed. > [ 4208.212193] phy0: frequency change to channel 5 failed. > [ 4208.212199] phy0: frequency change to channel 6 failed. > [ 4208.276097] phy0: frequency change to channel 8 failed. > [ 4208.276112] phy0: frequency change to channel 9 failed. > [ 4208.276119] phy0: frequency change to channel 10 failed. > [ 4208.276125] phy0: frequency change to channel 11 failed. > [ 4208.276132] phy0: frequency change to channel 12 failed. > [ 4208.524788] phy0: frequency change to channel 6 failed. > [ 4208.524949] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local > choice (reason=3) > [ 4208.525084] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) > [ 4208.724191] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 2) [...] Regards, Chr [-- Attachment #2: p54-dump-eeprom-to-dmesg.diff --] [-- Type: text/x-patch, Size: 598 bytes --] diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c index 8dfe815..7504588 100644 --- a/drivers/net/wireless/p54/eeprom.c +++ b/drivers/net/wireless/p54/eeprom.c @@ -540,6 +540,8 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) wrap = (struct eeprom_pda_wrap *) eeprom; entry = (void *)wrap->data + le16_to_cpu(wrap->len); + print_hex_dump_bytes("EEPROM:", DUMP_PREFIX_OFFSET, eeprom, len); + /* verify that at least the entry length/code fits */ while ((u8 *)entry <= end - sizeof(*entry)) { entry_len = le16_to_cpu(entry->len); ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-10-31 21:24 ` Prism54/p54pci Christian Lamparter @ 2009-11-02 5:07 ` James Grossmann 0 siblings, 0 replies; 21+ messages in thread From: James Grossmann @ 2009-11-02 5:07 UTC (permalink / raw) To: Christian Lamparter Cc: Luis R. Rodriguez, linux-wireless, John W. Linville, Larry Finger, Christian Lamparter [-- Attachment #1: Type: text/plain, Size: 4252 bytes --] attached is the dmesg: On Sat, Oct 31, 2009 at 3:24 PM, Christian Lamparter <chunkeey@googlemail.com> wrote: > On Saturday 31 October 2009 15:11:37 James Grossmann wrote: >> [ 4200.794299] cfg80211: Calling CRDA to update world regulatory >> domain >> [ 4200.857330] p54pci 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 >> (level, low) -> IRQ 11 >> [ 4200.857408] p54pci 0000:03:00.0: firmware: requesting isl3886pci >> [ 4201.432596] phy0: p54 detected a LM86 firmware >> [ 4201.432604] p54: rx_mtu reduced from 3240 to 2376 >> [ 4201.432610] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 >> [ 4201.432616] phy0: cryptographic accelerator WEP:YES, TKIP:YES, >> CCMP:YES > >> [ 4202.293254] phy0: EEPROM is damaged... you may not be able to use >> all channels with this device. > ^^^ = that's the culprit. > > do you think, you can get this EEPROM dump? > Just move the attach _patch_ into your compat-wireless' main directory. > Afterward, you have to execute: > patch -p1 < p54-dump-eeprom-to-dmesg.diff > > and rebuild & reload the driver and retrieve the data > from dmesg. > >> [ 4202.293286] phy0: [iqauto calibration data] is/are missing for >> channel:2 [2417 MHz]. >> [ 4202.293293] phy0: [iqauto calibration data] is/are missing for >> channel:3 [2422 MHz]. >> [ 4202.293300] phy0: [iqauto calibration data] is/are missing for >> channel:4 [2427 MHz]. >> [ 4202.293306] phy0: [iqauto calibration data] is/are missing for >> channel:5 [2432 MHz]. >> [ 4202.293313] phy0: [iqauto calibration data] is/are missing for >> channel:6 [2437 MHz]. >> [ 4202.293320] phy0: [iqauto calibration data] is/are missing for >> channel:8 [2447 MHz]. >> [ 4202.293326] phy0: [iqauto calibration data] is/are missing for >> channel:9 [2452 MHz]. >> [ 4202.293333] phy0: [iqauto calibration data] is/are missing for >> channel:10 [2457 MHz]. >> [ 4202.293340] phy0: [iqauto calibration data] is/are missing for >> channel:11 [2462 MHz]. >> [ 4202.293346] phy0: [iqauto calibration data] is/are missing for >> channel:12 [2467 MHz]. > >> [ 4202.293356] phy0: hwaddr 00:xx:xx:xx:xx:xx, MAC:isl3880 RF:Frisbee >> [ 4202.293787] phy0: Selected rate control algorithm 'minstrel' >> [ 4202.295616] Registered led device: p54-phy0::assoc >> [ 4202.295657] Registered led device: p54-phy0::tx >> [ 4202.295703] Registered led device: p54-phy0::rx >> [ 4202.295744] Registered led device: p54-phy0::radio >> [ 4202.295758] p54pci 0000:03:00.0: is registered as 'phy0' >> [ 4202.378618] udev: renamed network interface wlan0 to wlan1 >> [ 4202.509483] ADDRCONF(NETDEV_UP): wlan1: link is not ready >> [ 4202.724125] phy0: frequency change to channel 2 failed. >> [ 4202.724138] phy0: frequency change to channel 3 failed. >> [ 4202.724145] phy0: frequency change to channel 4 failed. >> [ 4202.724151] phy0: frequency change to channel 5 failed. >> [ 4202.724157] phy0: frequency change to channel 6 failed. >> [ 4202.780179] phy0: frequency change to channel 8 failed. >> [ 4202.780193] phy0: frequency change to channel 9 failed. >> [ 4202.780199] phy0: frequency change to channel 10 failed. >> [ 4202.780206] phy0: frequency change to channel 11 failed. >> [ 4202.780212] phy0: frequency change to channel 12 failed. >> [ 4208.212168] phy0: frequency change to channel 2 failed. >> [ 4208.212180] phy0: frequency change to channel 3 failed. >> [ 4208.212187] phy0: frequency change to channel 4 failed. >> [ 4208.212193] phy0: frequency change to channel 5 failed. >> [ 4208.212199] phy0: frequency change to channel 6 failed. >> [ 4208.276097] phy0: frequency change to channel 8 failed. >> [ 4208.276112] phy0: frequency change to channel 9 failed. >> [ 4208.276119] phy0: frequency change to channel 10 failed. >> [ 4208.276125] phy0: frequency change to channel 11 failed. >> [ 4208.276132] phy0: frequency change to channel 12 failed. >> [ 4208.524788] phy0: frequency change to channel 6 failed. >> [ 4208.524949] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local >> choice (reason=3) >> [ 4208.525084] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) >> [ 4208.724191] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 2) > [...] > > Regards, > Chr > [-- Attachment #2: p54pci.txt --] [-- Type: text/plain, Size: 56189 bytes --] [ 3415.906059] cfg80211: Calling CRDA to update world regulatory domain [ 3415.967883] p54pci 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 3415.967963] p54pci 0000:03:00.0: firmware: requesting isl3886pci [ 3416.456875] phy0: p54 detected a LM86 firmware [ 3416.456884] p54: rx_mtu reduced from 3240 to 2376 [ 3416.456890] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 [ 3416.456896] phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 3416.619266] cfg80211: World regulatory domain updated: [ 3416.619275] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3416.619283] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3416.619290] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3416.619297] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3416.619304] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3416.619310] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3417.317136] EEPROM:00000000: 47 4d 55 aa 00 00 00 00 ff ff ff ff 09 00 01 00 GMU............. [ 3417.317148] EEPROM:00000010: 58 58 58 58 58 58 00 00 00 00 00 00 00 00 00 00 XXXXXX.......... [ 3417.317155] EEPROM:00000020: 04 00 01 01 00 0a e9 08 64 62 0b 00 01 10 00 00 ........db...... [ 3417.317163] EEPROM:00000030: 0f 00 8b 00 01 00 ff 00 00 00 09 00 03 00 01 00 ................ [ 3417.317169] EEPROM:00000040: 1f 00 03 00 02 10 03 80 01 43 0b 00 07 10 10 00 .........C...... [ 3417.317176] EEPROM:00000050: 00 00 30 00 00 00 31 00 00 00 32 00 00 00 40 00 ..0...1...2...@. [ 3417.317183] EEPROM:00000060: 00 00 03 00 08 10 10 00 00 00 03 00 00 11 08 08 ................ [ 3417.317190] EEPROM:00000070: 08 08 07 00 03 00 43 36 32 30 35 30 31 31 30 37 ......C620501107 [ 3417.317197] EEPROM:00000080: 35 39 05 00 05 19 80 00 70 fe 80 00 70 fe 3a 00 59......p...p.:. [ 3417.317204] EEPROM:00000090: 03 19 00 0e 6c 09 3e 3a 35 2d 80 3f 71 09 3e 3a ....l.>:5-.?q.>: [ 3417.317211] EEPROM:000000a0: 36 2d 80 3f 76 09 3e 3a 36 2d 80 3f 7b 09 3e 3a 6-.?v.>:6-.?{.>: [ 3417.317218] EEPROM:000000b0: 36 2d 80 40 80 09 3e 3a 36 2d 80 40 85 09 3f 3b 6-.@..>:6-.@..?; [ 3417.317225] EEPROM:000000c0: 36 2d 80 40 8a 09 3f 3b 36 2d 80 40 8f 09 3f 3b 6-.@..?;6-.@..?; [ 3417.317231] EEPROM:000000d0: 36 2d 80 40 94 09 3f 3b 36 2d 80 40 99 09 3f 3b 6-.@..?;6-.@..?; [ 3417.317238] EEPROM:000000e0: 36 2d 80 40 9e 09 3f 3b 36 2d 80 40 a3 09 3f 3a 6-.@..?;6-.@..?: [ 3417.317245] EEPROM:000000f0: 36 2d 80 40 a8 09 3e 3a 36 2d 80 40 b4 09 3e 3a 6-.@..>:6-.@..>: [ 3417.317252] EEPROM:00000100: 36 2d 80 40 b9 00 04 19 00 0e 08 80 6c 09 44 74 6-.@........l.Dt [ 3417.317259] EEPROM:00000110: b2 3c 33 8e 34 05 72 28 d6 50 1c ba 34 10 a9 1b .<3.4.r(.P..4... [ 3417.317266] EEPROM:00000120: 04 9e 02 00 9c 00 71 09 44 72 b1 3c 32 8d 34 04 ......q.Dr.<2.4. [ 3417.317273] EEPROM:00000130: 71 28 d6 50 1c ba 34 10 a9 1a 04 9e 02 00 9c 00 q(.P..4......... [ 3417.317280] EEPROM:00000140: 76 09 45 7a b6 3d 38 90 35 08 73 29 d8 51 1d bb v.Ez.=8.5.s).Q.. [ 3417.317287] EEPROM:00000150: 35 11 a9 1c 05 9f 03 00 9c 00 7b 09 45 78 b5 3d 5.........{.Ex.= [ 3417.317294] EEPROM:00000160: 36 8f 35 07 72 29 d7 51 1d bb 35 11 a9 1b 05 9e 6.5.r).Q..5..... [ 3417.317301] EEPROM:00000170: 03 00 9b 00 80 09 45 77 b4 3d 35 8e 35 06 72 29 ......Ew.=5.5.r) [ 3417.317308] EEPROM:00000180: d7 50 1d ba 34 11 a9 1b 05 9e 02 00 9b 00 85 09 .P..4........... [ 3417.317315] EEPROM:00000190: 45 75 b3 3d 33 8d 35 05 71 29 d6 4f 1d ba 33 11 Eu.=3.5.q).O..3. [ 3417.317321] EEPROM:000001a0: a8 1a 05 9e 02 00 9b 00 8a 09 45 73 b2 3d 32 8c ..........Es.=2. [ 3417.317328] EEPROM:000001b0: 35 03 70 29 d5 4f 1d b9 33 11 a8 19 05 9e 01 00 5.p).O..3....... [ 3417.317335] EEPROM:000001c0: 9b 00 8f 09 45 73 b1 3d 32 8c 35 03 70 29 d5 4e ....Es.=2.5.p).N [ 3417.317342] EEPROM:000001d0: 1d b9 33 11 a8 19 05 9e 01 00 9b 00 94 09 45 72 ..3...........Er [ 3417.317349] EEPROM:000001e0: b1 3d 31 8c 35 03 6f 29 d5 4e 1d b9 32 11 a8 19 .=1.5.o).N..2... [ 3417.317356] EEPROM:000001f0: 05 9e 00 00 9b 00 99 09 45 72 b1 3d 31 8b 35 03 ........Er.=1.5. [ 3417.317363] EEPROM:00000200: 6f 29 d5 4e 1d b9 32 11 a8 19 05 9e 00 00 9b 00 o).N..2......... [ 3417.317370] EEPROM:00000210: 9e 09 45 71 b1 3d 31 8b 35 03 6f 29 d5 4e 1d b9 ..Eq.=1.5.o).N.. [ 3417.317377] EEPROM:00000220: 32 11 a8 18 05 9e 00 00 9b 00 a3 09 46 7a b6 3e 2...........Fz.> [ 3417.317384] EEPROM:00000230: 37 8f 36 07 72 2a d7 50 1e bb 34 12 a9 1a 06 9e 7.6.r*.P..4..... [ 3417.317391] EEPROM:00000240: 02 00 9b 00 a8 09 46 7a b6 3e 37 8f 36 07 71 2a ......Fz.>7.6.q* [ 3417.317398] EEPROM:00000250: d7 4f 1e ba 33 12 a9 1a 06 9e 01 00 9b 00 b4 09 .O..3........... [ 3417.317404] EEPROM:00000260: 46 7a b6 3e 37 8f 36 07 71 2a d7 4f 1e ba 33 12 Fz.>7.6.q*.O..3. [ 3417.317411] EEPROM:00000270: a9 1a 06 9e 01 00 9b 00 15 00 06 19 6c 09 05 00 ............l... [ 3417.317418] EEPROM:00000280: 00 00 fa 03 00 01 8a 09 04 00 00 00 fc 03 ff 00 ................ [ 3417.317425] EEPROM:00000290: a8 09 05 00 00 00 fa 03 ff 00 b4 09 05 00 00 00 ................ [ 3417.317432] EEPROM:000002a0: fa 03 ff 00 02 00 00 00 bc 48 ff ff ff ff ff ff .........H...... [ 3417.317439] EEPROM:000002b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317446] EEPROM:000002c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317452] EEPROM:000002d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317459] EEPROM:000002e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317466] EEPROM:000002f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317473] EEPROM:00000300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317480] EEPROM:00000310: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317487] EEPROM:00000320: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317493] EEPROM:00000330: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317500] EEPROM:00000340: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317507] EEPROM:00000350: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317514] EEPROM:00000360: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317521] EEPROM:00000370: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317528] EEPROM:00000380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317535] EEPROM:00000390: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317541] EEPROM:000003a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317548] EEPROM:000003b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317555] EEPROM:000003c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317562] EEPROM:000003d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317569] EEPROM:000003e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317576] EEPROM:000003f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317582] EEPROM:00000400: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317589] EEPROM:00000410: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317596] EEPROM:00000420: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317603] EEPROM:00000430: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317610] EEPROM:00000440: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317617] EEPROM:00000450: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317623] EEPROM:00000460: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317630] EEPROM:00000470: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317637] EEPROM:00000480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317644] EEPROM:00000490: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317651] EEPROM:000004a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317658] EEPROM:000004b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317664] EEPROM:000004c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317671] EEPROM:000004d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317678] EEPROM:000004e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317685] EEPROM:000004f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317692] EEPROM:00000500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317699] EEPROM:00000510: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317706] EEPROM:00000520: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317712] EEPROM:00000530: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317719] EEPROM:00000540: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317726] EEPROM:00000550: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317733] EEPROM:00000560: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317740] EEPROM:00000570: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317747] EEPROM:00000580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317753] EEPROM:00000590: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317760] EEPROM:000005a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317767] EEPROM:000005b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317774] EEPROM:000005c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317781] EEPROM:000005d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317788] EEPROM:000005e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317794] EEPROM:000005f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317801] EEPROM:00000600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317808] EEPROM:00000610: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317815] EEPROM:00000620: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317822] EEPROM:00000630: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317829] EEPROM:00000640: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317835] EEPROM:00000650: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317842] EEPROM:00000660: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317849] EEPROM:00000670: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317856] EEPROM:00000680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317863] EEPROM:00000690: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317870] EEPROM:000006a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317876] EEPROM:000006b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317883] EEPROM:000006c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317890] EEPROM:000006d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317897] EEPROM:000006e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317904] EEPROM:000006f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317911] EEPROM:00000700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317917] EEPROM:00000710: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317924] EEPROM:00000720: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317931] EEPROM:00000730: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317938] EEPROM:00000740: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317945] EEPROM:00000750: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317952] EEPROM:00000760: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317959] EEPROM:00000770: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317965] EEPROM:00000780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317972] EEPROM:00000790: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317979] EEPROM:000007a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317986] EEPROM:000007b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.317993] EEPROM:000007c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318000] EEPROM:000007d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318006] EEPROM:000007e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318013] EEPROM:000007f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318020] EEPROM:00000800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318027] EEPROM:00000810: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318034] EEPROM:00000820: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318041] EEPROM:00000830: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318047] EEPROM:00000840: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318054] EEPROM:00000850: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318061] EEPROM:00000860: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318068] EEPROM:00000870: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318075] EEPROM:00000880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318082] EEPROM:00000890: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318088] EEPROM:000008a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318095] EEPROM:000008b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318102] EEPROM:000008c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318109] EEPROM:000008d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318116] EEPROM:000008e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318123] EEPROM:000008f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318129] EEPROM:00000900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318136] EEPROM:00000910: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318143] EEPROM:00000920: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318150] EEPROM:00000930: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318157] EEPROM:00000940: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318164] EEPROM:00000950: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318170] EEPROM:00000960: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318177] EEPROM:00000970: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318184] EEPROM:00000980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318191] EEPROM:00000990: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318198] EEPROM:000009a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318205] EEPROM:000009b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318211] EEPROM:000009c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318218] EEPROM:000009d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318225] EEPROM:000009e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318232] EEPROM:000009f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318239] EEPROM:00000a00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318246] EEPROM:00000a10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318252] EEPROM:00000a20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318259] EEPROM:00000a30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318266] EEPROM:00000a40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318273] EEPROM:00000a50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318280] EEPROM:00000a60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318287] EEPROM:00000a70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318293] EEPROM:00000a80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318300] EEPROM:00000a90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318307] EEPROM:00000aa0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318314] EEPROM:00000ab0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318321] EEPROM:00000ac0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318328] EEPROM:00000ad0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318335] EEPROM:00000ae0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318341] EEPROM:00000af0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318348] EEPROM:00000b00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318355] EEPROM:00000b10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318362] EEPROM:00000b20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318369] EEPROM:00000b30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318376] EEPROM:00000b40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318382] EEPROM:00000b50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318389] EEPROM:00000b60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318396] EEPROM:00000b70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318403] EEPROM:00000b80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318410] EEPROM:00000b90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318417] EEPROM:00000ba0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318423] EEPROM:00000bb0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318430] EEPROM:00000bc0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318437] EEPROM:00000bd0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318444] EEPROM:00000be0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318451] EEPROM:00000bf0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318458] EEPROM:00000c00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318464] EEPROM:00000c10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318471] EEPROM:00000c20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318478] EEPROM:00000c30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318485] EEPROM:00000c40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318492] EEPROM:00000c50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318499] EEPROM:00000c60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318505] EEPROM:00000c70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318512] EEPROM:00000c80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318519] EEPROM:00000c90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318526] EEPROM:00000ca0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318533] EEPROM:00000cb0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318540] EEPROM:00000cc0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318547] EEPROM:00000cd0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318553] EEPROM:00000ce0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318560] EEPROM:00000cf0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318567] EEPROM:00000d00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318574] EEPROM:00000d10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318581] EEPROM:00000d20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318588] EEPROM:00000d30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318594] EEPROM:00000d40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318601] EEPROM:00000d50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318608] EEPROM:00000d60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318615] EEPROM:00000d70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318622] EEPROM:00000d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318629] EEPROM:00000d90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318635] EEPROM:00000da0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318642] EEPROM:00000db0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318649] EEPROM:00000dc0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318656] EEPROM:00000dd0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318663] EEPROM:00000de0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318670] EEPROM:00000df0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318676] EEPROM:00000e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318683] EEPROM:00000e10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318690] EEPROM:00000e20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318697] EEPROM:00000e30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318704] EEPROM:00000e40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318711] EEPROM:00000e50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318717] EEPROM:00000e60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318724] EEPROM:00000e70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318731] EEPROM:00000e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318738] EEPROM:00000e90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318745] EEPROM:00000ea0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318752] EEPROM:00000eb0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318759] EEPROM:00000ec0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318765] EEPROM:00000ed0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318772] EEPROM:00000ee0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318779] EEPROM:00000ef0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318786] EEPROM:00000f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318793] EEPROM:00000f10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318800] EEPROM:00000f20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318806] EEPROM:00000f30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318813] EEPROM:00000f40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318820] EEPROM:00000f50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318827] EEPROM:00000f60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318834] EEPROM:00000f70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318841] EEPROM:00000f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318847] EEPROM:00000f90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318854] EEPROM:00000fa0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318861] EEPROM:00000fb0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318868] EEPROM:00000fc0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318875] EEPROM:00000fd0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318882] EEPROM:00000fe0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318888] EEPROM:00000ff0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318895] EEPROM:00001000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318902] EEPROM:00001010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318909] EEPROM:00001020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318916] EEPROM:00001030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318923] EEPROM:00001040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318930] EEPROM:00001050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318936] EEPROM:00001060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318943] EEPROM:00001070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318950] EEPROM:00001080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318957] EEPROM:00001090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318964] EEPROM:000010a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318971] EEPROM:000010b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318977] EEPROM:000010c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318984] EEPROM:000010d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318991] EEPROM:000010e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.318998] EEPROM:000010f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319005] EEPROM:00001100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319012] EEPROM:00001110: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319019] EEPROM:00001120: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319025] EEPROM:00001130: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319032] EEPROM:00001140: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319039] EEPROM:00001150: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319046] EEPROM:00001160: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319053] EEPROM:00001170: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319060] EEPROM:00001180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319066] EEPROM:00001190: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319073] EEPROM:000011a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319080] EEPROM:000011b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319087] EEPROM:000011c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319094] EEPROM:000011d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319101] EEPROM:000011e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319107] EEPROM:000011f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319114] EEPROM:00001200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319121] EEPROM:00001210: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319128] EEPROM:00001220: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319135] EEPROM:00001230: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319142] EEPROM:00001240: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319148] EEPROM:00001250: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319155] EEPROM:00001260: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319162] EEPROM:00001270: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319169] EEPROM:00001280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319176] EEPROM:00001290: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319183] EEPROM:000012a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319190] EEPROM:000012b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319196] EEPROM:000012c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319203] EEPROM:000012d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319210] EEPROM:000012e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319217] EEPROM:000012f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319224] EEPROM:00001300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319231] EEPROM:00001310: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319237] EEPROM:00001320: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319244] EEPROM:00001330: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319251] EEPROM:00001340: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319258] EEPROM:00001350: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319265] EEPROM:00001360: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319272] EEPROM:00001370: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319279] EEPROM:00001380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319285] EEPROM:00001390: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319292] EEPROM:000013a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319299] EEPROM:000013b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319306] EEPROM:000013c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319313] EEPROM:000013d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319320] EEPROM:000013e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319326] EEPROM:000013f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319333] EEPROM:00001400: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319340] EEPROM:00001410: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319347] EEPROM:00001420: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319354] EEPROM:00001430: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319361] EEPROM:00001440: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319367] EEPROM:00001450: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319374] EEPROM:00001460: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319381] EEPROM:00001470: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319388] EEPROM:00001480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319395] EEPROM:00001490: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319402] EEPROM:000014a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319409] EEPROM:000014b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319415] EEPROM:000014c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319422] EEPROM:000014d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319429] EEPROM:000014e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319436] EEPROM:000014f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319443] EEPROM:00001500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319450] EEPROM:00001510: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319456] EEPROM:00001520: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319463] EEPROM:00001530: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319470] EEPROM:00001540: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319477] EEPROM:00001550: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319484] EEPROM:00001560: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319491] EEPROM:00001570: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319497] EEPROM:00001580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319504] EEPROM:00001590: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319511] EEPROM:000015a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319518] EEPROM:000015b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319525] EEPROM:000015c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319532] EEPROM:000015d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319539] EEPROM:000015e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319545] EEPROM:000015f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319552] EEPROM:00001600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319559] EEPROM:00001610: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319566] EEPROM:00001620: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319573] EEPROM:00001630: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319580] EEPROM:00001640: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319586] EEPROM:00001650: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319593] EEPROM:00001660: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319600] EEPROM:00001670: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319607] EEPROM:00001680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319614] EEPROM:00001690: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319621] EEPROM:000016a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319628] EEPROM:000016b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319634] EEPROM:000016c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319641] EEPROM:000016d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319648] EEPROM:000016e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319655] EEPROM:000016f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319662] EEPROM:00001700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319669] EEPROM:00001710: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319675] EEPROM:00001720: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319682] EEPROM:00001730: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319689] EEPROM:00001740: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319696] EEPROM:00001750: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319703] EEPROM:00001760: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319710] EEPROM:00001770: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319717] EEPROM:00001780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319723] EEPROM:00001790: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319730] EEPROM:000017a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319737] EEPROM:000017b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319744] EEPROM:000017c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319751] EEPROM:000017d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319758] EEPROM:000017e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319764] EEPROM:000017f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319771] EEPROM:00001800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319778] EEPROM:00001810: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319785] EEPROM:00001820: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319792] EEPROM:00001830: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319799] EEPROM:00001840: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319805] EEPROM:00001850: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319812] EEPROM:00001860: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319819] EEPROM:00001870: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319826] EEPROM:00001880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319833] EEPROM:00001890: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319840] EEPROM:000018a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319847] EEPROM:000018b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319853] EEPROM:000018c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319860] EEPROM:000018d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319867] EEPROM:000018e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319874] EEPROM:000018f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319881] EEPROM:00001900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319888] EEPROM:00001910: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319894] EEPROM:00001920: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319901] EEPROM:00001930: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319908] EEPROM:00001940: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319915] EEPROM:00001950: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319922] EEPROM:00001960: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319929] EEPROM:00001970: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319936] EEPROM:00001980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319942] EEPROM:00001990: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319949] EEPROM:000019a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319956] EEPROM:000019b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319963] EEPROM:000019c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319970] EEPROM:000019d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319977] EEPROM:000019e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319983] EEPROM:000019f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319990] EEPROM:00001a00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.319997] EEPROM:00001a10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320004] EEPROM:00001a20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320011] EEPROM:00001a30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320040] EEPROM:00001a40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320047] EEPROM:00001a50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320054] EEPROM:00001a60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320061] EEPROM:00001a70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320068] EEPROM:00001a80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320075] EEPROM:00001a90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320082] EEPROM:00001aa0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320089] EEPROM:00001ab0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320095] EEPROM:00001ac0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320102] EEPROM:00001ad0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320109] EEPROM:00001ae0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320116] EEPROM:00001af0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320123] EEPROM:00001b00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320130] EEPROM:00001b10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320137] EEPROM:00001b20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320144] EEPROM:00001b30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320150] EEPROM:00001b40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320157] EEPROM:00001b50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320164] EEPROM:00001b60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320171] EEPROM:00001b70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320178] EEPROM:00001b80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320185] EEPROM:00001b90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320192] EEPROM:00001ba0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320199] EEPROM:00001bb0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320205] EEPROM:00001bc0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320212] EEPROM:00001bd0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320219] EEPROM:00001be0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320226] EEPROM:00001bf0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320233] EEPROM:00001c00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320240] EEPROM:00001c10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320247] EEPROM:00001c20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320254] EEPROM:00001c30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320260] EEPROM:00001c40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320267] EEPROM:00001c50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320274] EEPROM:00001c60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320281] EEPROM:00001c70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320288] EEPROM:00001c80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320295] EEPROM:00001c90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320302] EEPROM:00001ca0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320309] EEPROM:00001cb0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320315] EEPROM:00001cc0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320322] EEPROM:00001cd0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320329] EEPROM:00001ce0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320336] EEPROM:00001cf0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320343] EEPROM:00001d00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320350] EEPROM:00001d10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320357] EEPROM:00001d20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320364] EEPROM:00001d30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320370] EEPROM:00001d40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320377] EEPROM:00001d50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320384] EEPROM:00001d60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320391] EEPROM:00001d70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320398] EEPROM:00001d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320405] EEPROM:00001d90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320412] EEPROM:00001da0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320419] EEPROM:00001db0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320425] EEPROM:00001dc0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320432] EEPROM:00001dd0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320439] EEPROM:00001de0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320446] EEPROM:00001df0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320453] EEPROM:00001e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320460] EEPROM:00001e10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320467] EEPROM:00001e20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320474] EEPROM:00001e30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320480] EEPROM:00001e40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320487] EEPROM:00001e50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320494] EEPROM:00001e60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320501] EEPROM:00001e70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320508] EEPROM:00001e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320515] EEPROM:00001e90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320522] EEPROM:00001ea0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320529] EEPROM:00001eb0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320535] EEPROM:00001ec0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320542] EEPROM:00001ed0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320549] EEPROM:00001ee0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320556] EEPROM:00001ef0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320563] EEPROM:00001f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320570] EEPROM:00001f10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320577] EEPROM:00001f20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320583] EEPROM:00001f30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320590] EEPROM:00001f40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320597] EEPROM:00001f50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320604] EEPROM:00001f60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320611] EEPROM:00001f70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320618] EEPROM:00001f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320625] EEPROM:00001f90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320632] EEPROM:00001fa0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320638] EEPROM:00001fb0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320645] EEPROM:00001fc0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320652] EEPROM:00001fd0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320659] EEPROM:00001fe0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320666] EEPROM:00001ff0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 3417.320673] EEPROM:00002000: 47 4d 55 aa 00 00 00 00 ff ff ff ff 09 00 01 00 GMU............. [ 3417.320680] EEPROM:00002010: 58 58 58 58 58 58 00 00 00 00 00 00 00 00 00 00 XXXXXX.......... [ 3417.320695] phy0: EEPROM is damaged... you may not be ableto use all channels with this device. [ 3417.320719] phy0: [iqauto calibration data] is/are missing for channel:2 [2417 MHz]. [ 3417.320726] phy0: [iqauto calibration data] is/are missing for channel:3 [2422 MHz]. [ 3417.320733] phy0: [iqauto calibration data] is/are missing for channel:4 [2427 MHz]. [ 3417.320739] phy0: [iqauto calibration data] is/are missing for channel:5 [2432 MHz]. [ 3417.320746] phy0: [iqauto calibration data] is/are missing for channel:6 [2437 MHz]. [ 3417.320753] phy0: [iqauto calibration data] is/are missing for channel:8 [2447 MHz]. [ 3417.320759] phy0: [iqauto calibration data] is/are missing for channel:9 [2452 MHz]. [ 3417.320766] phy0: [iqauto calibration data] is/are missing for channel:10 [2457 MHz]. [ 3417.320772] phy0: [iqauto calibration data] is/are missing for channel:11 [2462 MHz]. [ 3417.320779] phy0: [iqauto calibration data] is/are missing for channel:12 [2467 MHz]. [ 3417.320788] phy0: hwaddr 00:xx:xx:xx:xx:xx, MAC:isl3880 RF:Frisbee [ 3417.321223] phy0: Selected rate control algorithm 'minstrel' [ 3417.323041] Registered led device: p54-phy0::assoc [ 3417.323080] Registered led device: p54-phy0::tx [ 3417.323124] Registered led device: p54-phy0::rx [ 3417.323164] Registered led device: p54-phy0::radio [ 3417.323177] p54pci 0000:03:00.0: is registered as 'phy0' [ 3417.365790] udev: renamed network interface wlan0 to wlan1 [ 3417.655236] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 3417.948077] phy0: frequency change to channel 2 failed. [ 3417.948089] phy0: frequency change to channel 3 failed. [ 3417.948096] phy0: frequency change to channel 4 failed. [ 3417.948102] phy0: frequency change to channel 5 failed. [ 3417.948108] phy0: frequency change to channel 6 failed. [ 3418.004075] phy0: frequency change to channel 8 failed. [ 3418.004087] phy0: frequency change to channel 9 failed. [ 3418.004093] phy0: frequency change to channel 10 failed. [ 3418.004100] phy0: frequency change to channel 11 failed. [ 3418.004106] phy0: frequency change to channel 12 failed. [ 3423.440173] phy0: frequency change to channel 2 failed. [ 3423.440185] phy0: frequency change to channel 3 failed. [ 3423.440192] phy0: frequency change to channel 4 failed. [ 3423.440198] phy0: frequency change to channel 5 failed. [ 3423.440204] phy0: frequency change to channel 6 failed. [ 3423.496176] phy0: frequency change to channel 8 failed. [ 3423.496187] phy0: frequency change to channel 9 failed. [ 3423.496193] phy0: frequency change to channel 10 failed. [ 3423.496200] phy0: frequency change to channel 11 failed. [ 3423.496206] phy0: frequency change to channel 12 failed. [ 3423.744761] phy0: frequency change to channel 11 failed. [ 3423.744917] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local choice (reason=3) [ 3423.745045] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) [ 3423.944182] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 2) [ 3424.144178] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 3) [ 3424.344178] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx timed out [ 3428.932186] phy0: frequency change to channel 2 failed. [ 3428.932200] phy0: frequency change to channel 3 failed. [ 3428.932207] phy0: frequency change to channel 4 failed. [ 3428.932213] phy0: frequency change to channel 5 failed. [ 3428.932219] phy0: frequency change to channel 6 failed. [ 3428.989521] phy0: frequency change to channel 8 failed. [ 3428.989530] phy0: frequency change to channel 9 failed. [ 3428.989537] phy0: frequency change to channel 10 failed. [ 3428.989543] phy0: frequency change to channel 11 failed. [ 3428.989550] phy0: frequency change to channel 12 failed. [ 3429.236182] phy0: frequency change to channel 11 failed. [ 3429.236932] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) [ 3429.436190] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 2) [ 3429.636179] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 3) [ 3429.836167] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx timed out [ 3447.628574] p54pci 0000:03:00.0: PCI INT A disabled [ 3460.600505] Loaded prism54 driver, version 1.2 [ 3460.600601] prism54 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 3460.628870] eth1: resetting device... [ 3460.628893] eth1: uploading firmware... [ 3460.742486] prism54 0000:03:00.0: firmware: requesting isl3890 [ 3460.799207] eth1: firmware version: 1.0.4.3 [ 3460.799254] eth1: firmware upload complete [ 3461.030728] eth1: interface reset complete [ 3461.031206] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 3470.948180] eth1: timeout waiting for mgmt response 250, triggering device [ 3480.977722] eth1: WPA IE Attachment was set [ 3482.294801] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 3493.120158] eth1: no IPv6 routers present ^ permalink raw reply [flat|nested] 21+ messages in thread
[parent not found: <200911021611.37354.chunkeey@googlemail.com>]
[parent not found: <167ae39b0911060900i2c8f4a78w4edecdcec36f1a38@mail.gmail.com>]
* Re: Prism54/p54pci [not found] ` <167ae39b0911060900i2c8f4a78w4edecdcec36f1a38@mail.gmail.com> @ 2009-11-06 17:48 ` Christian Lamparter 2009-11-06 18:45 ` Prism54/p54pci James Grossmann 0 siblings, 1 reply; 21+ messages in thread From: Christian Lamparter @ 2009-11-06 17:48 UTC (permalink / raw) To: James Grossmann; +Cc: linux-wireless On Friday 06 November 2009 18:00:54 James Grossmann wrote: > It connects up with the patch! > I'll attach a dmesg for any info you might be able to glean from that. > THANKS! it's a start, but there are some serious implications. but first: what is your signal (dBm) reading (iwconfig / iw dev wlanX info)? I'm asking this because your device is only fine-tunable for channel 1, 7, 13 & 14 with the current data points. some performance figures would be nice as well. e.g.: iperf (tcp) should be > 18Mbit/s, if you are close & free line of sight second: what should we do about these devices? Surely, the best thing would be to simply reprogram the eeprom, but this (being complicated work) requires soldering skills/tools, a steady hand and enough boredom. Therefor this is likely the least ideal option to put into the WIKI @ wireless.kernel.org . Any suitable ideas? Regards, Chr --- > [ 5593.622225] cfg80211: Calling CRDA to update world regulatory > domain > [ 5593.756965] p54pci 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 > (level, low) -> IRQ 11 > [ 5593.757087] p54pci 0000:03:00.0: firmware: requesting isl3886pci > [ 5593.799682] cfg80211: World regulatory domain updated: > [ 5593.799693] (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 5593.799701] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 5593.799708] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 5593.799714] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 5593.799721] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 5593.799728] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 5593.826106] phy0: p54 detected a LM86 firmware > [ 5593.826115] p54: rx_mtu reduced from 3240 to 2376 > [ 5593.826121] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 > [ 5593.826127] phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES > [ 5593.943095] phy0: hwaddr 00:xx:xx:xx:xx:xx, MAC:isl3880 RF:Frisbee > > [ 5593.943532] phy0: Selected rate control algorithm 'minstrel' > [ 5593.945386] Registered led device: p54-phy0::assoc > [ 5593.945426] Registered led device: p54-phy0::tx > [ 5593.945466] Registered led device: p54-phy0::rx > [ 5593.945507] Registered led device: p54-phy0::radio > [ 5593.945521] p54pci 0000:03:00.0: is registered as 'phy0' > [ 5593.973148] udev: renamed network interface wlan0 to wlan1 > [ 5594.105670] ADDRCONF(NETDEV_UP): wlan1: link is not ready > [ 5601.380939] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local > choice (reason=3) > [ 5601.381046] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) > [ 5601.385723] wlan1: direct probe responded > [ 5601.385738] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx (try 1) > [ 5601.387961] wlan1: authenticated > [ 5601.388049] wlan1: associate with AP 00:xx:xx:xx:xx:xx (try 1) > [ 5601.390237] wlan1: RX AssocResp from 00:xx:xx:xx:xx:xx (capab=0x401 > status=0 aid=2) > [ 5601.390246] wlan1: associated > [ 5601.391891] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready > [ 5612.024163] wlan1: no IPv6 routers present > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-06 17:48 ` Prism54/p54pci Christian Lamparter @ 2009-11-06 18:45 ` James Grossmann 2009-11-06 19:14 ` Prism54/p54pci Christian Lamparter 0 siblings, 1 reply; 21+ messages in thread From: James Grossmann @ 2009-11-06 18:45 UTC (permalink / raw) To: Christian Lamparter; +Cc: linux-wireless Here's the iwconfig: wlan1 IEEE 802.11bg ESSID:"newton" Mode:Managed Frequency:2.462 GHz Access Point: 00:xx:xx:xx:xx:xx Bit Rate=48 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=50/70 Signal level=-60 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I was unable to run the iperf as the client on the laptop (it hard locked the computer twice), I ran it as server and received the following at a fair distance from the router (a couple of rooms, same as the iwconfig above) Client connecting to 192.168.1.3, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.5 port 47866 connected with 192.168.1.3 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.4 sec 14.6 MBytes 11.7 Mbits/sec Same test across the room from the router: iperf -c 192.168.1.3 ------------------------------------------------------------ Client connecting to 192.168.1.3, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.5 port 47867 connected with 192.168.1.3 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 21.4 MBytes 17.9 Mbits/sec wlan1 IEEE 802.11bg ESSID:"newton" Mode:Managed Frequency:2.462 GHz Access Point: 00:xx:xx:xx:xx:xx Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-37 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Here's a little bit more I've been getting in my dmesg: [ 91.453279] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local choice (reason=3) [ 91.453421] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) [ 91.457825] wlan1: direct probe responded [ 91.457839] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx (try 1) [ 91.462748] wlan1: authenticated [ 91.462808] wlan1: associate with AP 00:xx:xx:xx:xx:xx (try 1) [ 91.465574] wlan1: RX AssocResp from 00:xx:xx:xx:xx:xx (capab=0x401 status=0 aid=2) [ 91.465584] wlan1: associated [ 91.467208] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 101.500094] wlan1: no IPv6 routers present [ 101.893294] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 773.648180] wlan1: deauthenticated from 00:xx:xx:xx:xx:xx (Reason: 7) [ 773.649900] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) [ 773.654069] wlan1: direct probe responded [ 773.654082] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx (try 1) [ 773.655939] wlan1: deauthenticated from 00:xx:xx:xx:xx:xx (Reason: 7) On Fri, Nov 6, 2009 at 11:48 AM, Christian Lamparter <chunkeey@googlemail.com> wrote: > On Friday 06 November 2009 18:00:54 James Grossmann wrote: >> It connects up with the patch! >> I'll attach a dmesg for any info you might be able to glean from that. >> THANKS! > > it's a start, but there are some serious implications. > > but first: what is your signal (dBm) reading (iwconfig / iw dev wlanX info)? > > I'm asking this because your device is only fine-tunable for > channel 1, 7, 13 & 14 with the current data points. > > some performance figures would be nice as well. > e.g.: iperf (tcp) should be > 18Mbit/s, > if you are close & free line of sight > > second: what should we do about these devices? > > Surely, the best thing would be to simply reprogram the eeprom, > but this (being complicated work) requires soldering skills/tools, > a steady hand and enough boredom. Therefor this is likely the least > ideal option to put into the WIKI @ wireless.kernel.org . > Any suitable ideas? > > Regards, > Chr > > --- >> [ 5593.622225] cfg80211: Calling CRDA to update world regulatory >> domain >> [ 5593.756965] p54pci 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 >> (level, low) -> IRQ 11 >> [ 5593.757087] p54pci 0000:03:00.0: firmware: requesting isl3886pci >> [ 5593.799682] cfg80211: World regulatory domain updated: >> [ 5593.799693] (start_freq - end_freq @ bandwidth), >> (max_antenna_gain, max_eirp) >> [ 5593.799701] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, >> 2000 mBm) >> [ 5593.799708] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, >> 2000 mBm) >> [ 5593.799714] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, >> 2000 mBm) >> [ 5593.799721] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) >> [ 5593.799728] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) >> [ 5593.826106] phy0: p54 detected a LM86 firmware >> [ 5593.826115] p54: rx_mtu reduced from 3240 to 2376 >> [ 5593.826121] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 >> [ 5593.826127] phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES >> [ 5593.943095] phy0: hwaddr 00:xx:xx:xx:xx:xx, MAC:isl3880 RF:Frisbee >> >> [ 5593.943532] phy0: Selected rate control algorithm 'minstrel' >> [ 5593.945386] Registered led device: p54-phy0::assoc >> [ 5593.945426] Registered led device: p54-phy0::tx >> [ 5593.945466] Registered led device: p54-phy0::rx >> [ 5593.945507] Registered led device: p54-phy0::radio >> [ 5593.945521] p54pci 0000:03:00.0: is registered as 'phy0' >> [ 5593.973148] udev: renamed network interface wlan0 to wlan1 >> [ 5594.105670] ADDRCONF(NETDEV_UP): wlan1: link is not ready >> [ 5601.380939] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local >> choice (reason=3) >> [ 5601.381046] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) >> [ 5601.385723] wlan1: direct probe responded >> [ 5601.385738] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx (try 1) >> [ 5601.387961] wlan1: authenticated >> [ 5601.388049] wlan1: associate with AP 00:xx:xx:xx:xx:xx (try 1) >> [ 5601.390237] wlan1: RX AssocResp from 00:xx:xx:xx:xx:xx (capab=0x401 >> status=0 aid=2) >> [ 5601.390246] wlan1: associated >> [ 5601.391891] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready >> [ 5612.024163] wlan1: no IPv6 routers present >> > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-06 18:45 ` Prism54/p54pci James Grossmann @ 2009-11-06 19:14 ` Christian Lamparter 2009-11-06 19:37 ` Prism54/p54pci James Grossmann 0 siblings, 1 reply; 21+ messages in thread From: Christian Lamparter @ 2009-11-06 19:14 UTC (permalink / raw) To: James Grossmann; +Cc: linux-wireless On Friday 06 November 2009 19:45:53 James Grossmann wrote: > Here's the iwconfig: > wlan1 IEEE 802.11bg ESSID:"newton" > Mode:Managed Frequency:2.462 GHz Access Point: 00:xx:xx:xx:xx:xx > Bit Rate=48 Mb/s Tx-Power=20 dBm > Retry long limit:7 RTS thr:off Fragment thr:off > Power Management:off > Link Quality=50/70 Signal level=-60 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > I was unable to run the iperf as the client on the laptop > (it hard locked the computer twice), huu, that's really bad. especially, since a new release is around the corner. Do you think you can catch the oops/bug report? (switch to virtual terminal Alt-Ctrl-F1 and start iperf -c there) > I ran it as server and received the > following at a fair distance from the router (a couple of rooms, same > as the iwconfig above) > Client connecting to 192.168.1.3, TCP port 5001 > TCP window size: 16.0 KByte (default) > ------------------------------------------------------------ > [ 3] local 192.168.1.5 port 47866 connected with 192.168.1.3 port 5001 > [ ID] Interval Transfer Bandwidth > [ 3] 0.0-10.4 sec 14.6 MBytes 11.7 Mbits/sec > > Same test across the room from the router: > iperf -c 192.168.1.3 > ------------------------------------------------------------ > Client connecting to 192.168.1.3, TCP port 5001 > TCP window size: 16.0 KByte (default) > ------------------------------------------------------------ > [ 3] local 192.168.1.5 port 47867 connected with 192.168.1.3 port 5001 > [ ID] Interval Transfer Bandwidth > [ 3] 0.0-10.0 sec 21.4 MBytes 17.9 Mbits/sec > > wlan1 IEEE 802.11bg ESSID:"newton" > Mode:Managed Frequency:2.462 GHz Access Point: 00:xx:xx:xx:xx:xx > Bit Rate=54 Mb/s Tx-Power=20 dBm > Retry long limit:7 RTS thr:off Fragment thr:off > Power Management:off > Link Quality=70/70 Signal level=-37 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > Here's a little bit more I've been getting in my dmesg: > [ 91.453279] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local choice (reason=3) > [ 91.453421] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) > [ 91.457825] wlan1: direct probe responded > [ 91.457839] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx (try 1) > [ 91.462748] wlan1: authenticated > [ 91.462808] wlan1: associate with AP 00:xx:xx:xx:xx:xx (try 1) > [ 91.465574] wlan1: RX AssocResp from 00:xx:xx:xx:xx:xx (capab=0x401 > status=0 aid=2) > [ 91.465584] wlan1: associated > [ 91.467208] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready > [ 101.500094] wlan1: no IPv6 routers present > [ 101.893294] ondemand governor failed, too long transition latency > of HW, fallback to performance governor > [ 773.648180] wlan1: deauthenticated from 00:xx:xx:xx:xx:xx (Reason: 7) > [ 773.649900] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) > [ 773.654069] wlan1: direct probe responded > [ 773.654082] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx (try 1) > [ 773.655939] wlan1: deauthenticated from 00:xx:xx:xx:xx:xx (Reason: 7) Reason 7 => Class 3 (usually data frames) frame from non-assoc station. Either, your STA timed out (due to lack of traffic?) or the AP lost the connection state for some strange reason (reset?). Regards, Chr ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-06 19:14 ` Prism54/p54pci Christian Lamparter @ 2009-11-06 19:37 ` James Grossmann 2009-11-06 20:33 ` Prism54/p54pci Christian Lamparter 0 siblings, 1 reply; 21+ messages in thread From: James Grossmann @ 2009-11-06 19:37 UTC (permalink / raw) To: Christian Lamparter; +Cc: linux-wireless Doing it from the console doesn't seem to give a kernel oops... it just locks up the computer such that I can't even change the caps lock status. It starts the connection, and then the activity light on the card goes on and the computer is locked up. With regard to the losing connection/timing out, I'm seeing that a fair amount, when I have data transferring (watching an active ssh connection, or streaming audio), and especially when I'm not doing anything... Thanks, James On Fri, Nov 6, 2009 at 1:14 PM, Christian Lamparter <chunkeey@googlemail.com> wrote: > On Friday 06 November 2009 19:45:53 James Grossmann wrote: >> Here's the iwconfig: >> wlan1 IEEE 802.11bg ESSID:"newton" >> Mode:Managed Frequency:2.462 GHz Access Point: 00:xx:xx:xx:xx:xx >> Bit Rate=48 Mb/s Tx-Power=20 dBm >> Retry long limit:7 RTS thr:off Fragment thr:off >> Power Management:off >> Link Quality=50/70 Signal level=-60 dBm >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >> >> I was unable to run the iperf as the client on the laptop >> (it hard locked the computer twice), > huu, that's really bad. especially, since a new release is around the corner. > > Do you think you can catch the oops/bug report? > (switch to virtual terminal Alt-Ctrl-F1 and start iperf -c there) > >> I ran it as server and received the >> following at a fair distance from the router (a couple of rooms, same >> as the iwconfig above) >> Client connecting to 192.168.1.3, TCP port 5001 >> TCP window size: 16.0 KByte (default) >> ------------------------------------------------------------ >> [ 3] local 192.168.1.5 port 47866 connected with 192.168.1.3 port 5001 >> [ ID] Interval Transfer Bandwidth >> [ 3] 0.0-10.4 sec 14.6 MBytes 11.7 Mbits/sec >> >> Same test across the room from the router: >> iperf -c 192.168.1.3 >> ------------------------------------------------------------ >> Client connecting to 192.168.1.3, TCP port 5001 >> TCP window size: 16.0 KByte (default) >> ------------------------------------------------------------ >> [ 3] local 192.168.1.5 port 47867 connected with 192.168.1.3 port 5001 >> [ ID] Interval Transfer Bandwidth >> [ 3] 0.0-10.0 sec 21.4 MBytes 17.9 Mbits/sec >> >> wlan1 IEEE 802.11bg ESSID:"newton" >> Mode:Managed Frequency:2.462 GHz Access Point: 00:xx:xx:xx:xx:xx >> Bit Rate=54 Mb/s Tx-Power=20 dBm >> Retry long limit:7 RTS thr:off Fragment thr:off >> Power Management:off >> Link Quality=70/70 Signal level=-37 dBm >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >> >> Here's a little bit more I've been getting in my dmesg: >> [ 91.453279] wlan1: deauthenticating from 00:xx:xx:xx:xx:xx by local choice (reason=3) >> [ 91.453421] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) >> [ 91.457825] wlan1: direct probe responded >> [ 91.457839] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx (try 1) >> [ 91.462748] wlan1: authenticated >> [ 91.462808] wlan1: associate with AP 00:xx:xx:xx:xx:xx (try 1) >> [ 91.465574] wlan1: RX AssocResp from 00:xx:xx:xx:xx:xx (capab=0x401 >> status=0 aid=2) >> [ 91.465584] wlan1: associated >> [ 91.467208] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready >> [ 101.500094] wlan1: no IPv6 routers present >> [ 101.893294] ondemand governor failed, too long transition latency >> of HW, fallback to performance governor > >> [ 773.648180] wlan1: deauthenticated from 00:xx:xx:xx:xx:xx (Reason: 7) >> [ 773.649900] wlan1: direct probe to AP 00:xx:xx:xx:xx:xx (try 1) >> [ 773.654069] wlan1: direct probe responded >> [ 773.654082] wlan1: authenticate with AP 00:xx:xx:xx:xx:xx (try 1) >> [ 773.655939] wlan1: deauthenticated from 00:xx:xx:xx:xx:xx (Reason: 7) > > Reason 7 => Class 3 (usually data frames) frame from non-assoc station. > Either, your STA timed out (due to lack of traffic?) or the AP lost > the connection state for some strange reason (reset?). > > Regards, > Chr > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-06 19:37 ` Prism54/p54pci James Grossmann @ 2009-11-06 20:33 ` Christian Lamparter 2009-11-06 20:52 ` Prism54/p54pci James Grossmann 0 siblings, 1 reply; 21+ messages in thread From: Christian Lamparter @ 2009-11-06 20:33 UTC (permalink / raw) To: James Grossmann; +Cc: linux-wireless On Friday 06 November 2009 20:37:00 James Grossmann wrote: > Doing it from the console doesn't seem to give a kernel oops... it > just locks up the computer such that I can't even change the caps lock > status. It starts the connection, and then the activity light on the > card goes on and the computer is locked up. well, there are other ways to capture the oops, but I don't think your laptop has a serial console or a real reset button?! does your caps lock & scroll lock LED blink? (they should) does the kernel reboot itself (after ~10 seconds), if you add panic=10 to the kernel-parameters in grub configuration? do you have some sort of bootsplash or frame buffer console? (e.g. KMS/vesa/etc...) because these advanced features can make it really hard to get the message to the screen before it goes black. is there nothing in /var/log/syslog after a crash? > With regard to the losing connection/timing out, I'm seeing that a > fair amount, when I have data transferring (watching an active ssh > connection, or streaming audio), and especially when I'm not doing > anything... well, there could be several different things, I hope you're using services like Network-manager, wpa_supplicant to manage your connection. Because they will automatically reconnect as soon as the link dies. what could be interesting: iw dev wlanX scan / iwlist wlanX scan dump from your AP... especially the TSF/tsf value, (it's a hexadecimal value which acts like a uptime for the AP) Regards, Chr ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-06 20:33 ` Prism54/p54pci Christian Lamparter @ 2009-11-06 20:52 ` James Grossmann 2009-11-06 21:45 ` Prism54/p54pci Christian Lamparter 2009-11-12 16:17 ` Prism54/p54pci Christian Lamparter 0 siblings, 2 replies; 21+ messages in thread From: James Grossmann @ 2009-11-06 20:52 UTC (permalink / raw) To: Christian Lamparter; +Cc: linux-wireless my caps lock & scroll lock leds are not blinking, and yet the computer is frozen. (I'm not the best at terminology, I guess that might not be defined as a hard lock.) I get no odd messages in my syslog. I am using Ubuntu right now, so I'm guessing that they have all the prettyness going that they can, covering the important messages, but as it's not an actual oops, I'm not certain that's hurting us. I am using network-manager, so it does reconnect, however, I find that to be less than optimal. Thanks, James On Fri, Nov 6, 2009 at 2:33 PM, Christian Lamparter <chunkeey@googlemail.com> wrote: > On Friday 06 November 2009 20:37:00 James Grossmann wrote: >> Doing it from the console doesn't seem to give a kernel oops... it >> just locks up the computer such that I can't even change the caps lock >> status. It starts the connection, and then the activity light on the >> card goes on and the computer is locked up. > well, there are other ways to capture the oops, but I don't think > your laptop has a serial console or a real reset button?! > > does your caps lock & scroll lock LED blink? (they should) > > does the kernel reboot itself (after ~10 seconds), if you add > panic=10 > to the kernel-parameters in grub configuration? > > do you have some sort of bootsplash or frame buffer console? > (e.g. KMS/vesa/etc...) because these advanced features can make it > really hard to get the message to the screen before it goes black. > > is there nothing in /var/log/syslog after a crash? > >> With regard to the losing connection/timing out, I'm seeing that a >> fair amount, when I have data transferring (watching an active ssh >> connection, or streaming audio), and especially when I'm not doing >> anything... > well, there could be several different things, I hope you're using > services like Network-manager, wpa_supplicant to manage your connection. > Because they will automatically reconnect as soon as the link dies. > > what could be interesting: iw dev wlanX scan / iwlist wlanX scan > dump from your AP... especially the TSF/tsf value, > (it's a hexadecimal value which acts like a uptime for the AP) > > Regards, > Chr > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-06 20:52 ` Prism54/p54pci James Grossmann @ 2009-11-06 21:45 ` Christian Lamparter 2009-11-06 22:17 ` Prism54/p54pci James Grossmann 2009-11-12 16:17 ` Prism54/p54pci Christian Lamparter 1 sibling, 1 reply; 21+ messages in thread From: Christian Lamparter @ 2009-11-06 21:45 UTC (permalink / raw) To: James Grossmann; +Cc: linux-wireless On Friday 06 November 2009 21:52:42 James Grossmann wrote: > my caps lock & scroll lock leds are not blinking, and yet the computer > is frozen. (I'm not the best at terminology, I guess that might not > be defined as a hard lock.) I get no odd messages in my syslog. I am > using Ubuntu right now, so I'm guessing that they have all the > prettyness going that they can, covering the important messages, but > as it's not an actual oops, I'm not certain that's hurting us. Ubuntu's kernel team provide some helpful texts about getting more informations out of the crashes: (a bit of a hassle) https://wiki.ubuntu.com/KernelTeam/CrashdumpRecipe https://help.ubuntu.com/community/DebuggingSystemCrash but maybe you can save you some time: 1. if possible update your compat-wireless a crash bug (affects compat-wireless, wireless-testing and even -rcX series) has been fixed. This bug is known to strike on configurations with a high number of auth/assoc/deauth - cycles. http://thread.gmane.org/gmane.linux.kernel/908831/focus=41872 2. Quintin Pitts had/has problems with the reliability of his p54pci <-> pci-bus and wrote a patch: http://patchwork.kernel.org/patch/53004/raw/ unfortunately for him, his pci-bridge is known to be faulty, but maybe he found some real bugs after all. 3. replace firmware: http://daemonizer.de/prism54/prism54-fw/fw-softmac/2.13.1.0.arm http://daemonizer.de/prism54/prism54-fw/fw-softmac/lmac_2.7.0.0.arm > I am using network-manager, so it does reconnect, however, I find that > to be less than optimal. yeah, normally you can see such phenomena when you have a funky AP and enable wifi powersaving... but this is unlikely, as the ps is disabled (can be enabled with iwconfig wlanX power on) for this reason. can you please tell me more about your AP? e.g: Product Name, Vendor, firmware revision, is it 802.11 a/b/g/n, is WEP/WPA(2) enabled, or is it just an open ap? ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-06 21:45 ` Prism54/p54pci Christian Lamparter @ 2009-11-06 22:17 ` James Grossmann 0 siblings, 0 replies; 21+ messages in thread From: James Grossmann @ 2009-11-06 22:17 UTC (permalink / raw) To: Christian Lamparter; +Cc: linux-wireless sorry I forgot about that, I'm using a wrt54gs 1.0 with dd-wrt (legacy, if I remember correctly -- DD-WRT v24 (05/20/08) vpn - build 9517M Eko ) firmware. Uptime of 4 days, it has had its problems, but not so much of recent, the wireless was crashing fairly often a while back, but I last rebooted it before that 2 months ago. I've been using it without any wep/wpa of recent, I ran into some access devices that were fighting with it, and in the small town I live in, I doubt anyone else knows enough about computers to hack wifi...I hope...haven't seen anything in the logs. Hope that's helpful James On Fri, Nov 6, 2009 at 3:45 PM, Christian Lamparter <chunkeey@googlemail.com> wrote: > On Friday 06 November 2009 21:52:42 James Grossmann wrote: >> my caps lock & scroll lock leds are not blinking, and yet the computer >> is frozen. (I'm not the best at terminology, I guess that might not >> be defined as a hard lock.) I get no odd messages in my syslog. I am >> using Ubuntu right now, so I'm guessing that they have all the >> prettyness going that they can, covering the important messages, but >> as it's not an actual oops, I'm not certain that's hurting us. > > Ubuntu's kernel team provide some helpful texts about getting more > informations out of the crashes: (a bit of a hassle) > https://wiki.ubuntu.com/KernelTeam/CrashdumpRecipe > https://help.ubuntu.com/community/DebuggingSystemCrash > > but maybe you can save you some time: > 1. if possible update your compat-wireless > a crash bug (affects compat-wireless, wireless-testing and even -rcX series) > has been fixed. This bug is known to strike on configurations with a > high number of auth/assoc/deauth - cycles. > > http://thread.gmane.org/gmane.linux.kernel/908831/focus=41872 > > 2. Quintin Pitts had/has problems with the reliability of his > p54pci <-> pci-bus and wrote a patch: > http://patchwork.kernel.org/patch/53004/raw/ > > unfortunately for him, his pci-bridge is known to be faulty, > but maybe he found some real bugs after all. > > 3. replace firmware: > http://daemonizer.de/prism54/prism54-fw/fw-softmac/2.13.1.0.arm > http://daemonizer.de/prism54/prism54-fw/fw-softmac/lmac_2.7.0.0.arm > >> I am using network-manager, so it does reconnect, however, I find that >> to be less than optimal. > yeah, normally you can see such phenomena when you have a funky AP and > enable wifi powersaving... but this is unlikely, as the ps is disabled > (can be enabled with iwconfig wlanX power on) for this reason. > > can you please tell me more about your AP? > e.g: Product Name, Vendor, firmware revision, > is it 802.11 a/b/g/n, is WEP/WPA(2) enabled, or is it just an open ap? > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-06 20:52 ` Prism54/p54pci James Grossmann 2009-11-06 21:45 ` Prism54/p54pci Christian Lamparter @ 2009-11-12 16:17 ` Christian Lamparter 2009-11-12 18:56 ` Prism54/p54pci Tim Gardner 1 sibling, 1 reply; 21+ messages in thread From: Christian Lamparter @ 2009-11-12 16:17 UTC (permalink / raw) To: James Grossmann; +Cc: linux-wireless On Friday 06 November 2009 21:52:42 James Grossmann wrote: > my caps lock & scroll lock leds are not blinking, and yet the computer > is frozen. (I'm not the best at terminology, I guess that might not > be defined as a hard lock.) I get no odd messages in my syslog. I am > using Ubuntu right now, so I'm guessing that they have all the > prettyness going that they can, covering the important messages, but > as it's not an actual oops, I'm not certain that's hurting us. just a update: I can confirm the freeze with ubuntu 9.10 (2.6.31-14 & 2.6.31-15-generic) + compat-wireless + p54pci (either as backport module or compiled from git). The original modules (shipped with 2.6.31-14/15) are fine though..?! Regards, Chr ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-12 16:17 ` Prism54/p54pci Christian Lamparter @ 2009-11-12 18:56 ` Tim Gardner 2009-11-12 19:37 ` Prism54/p54pci Christian Lamparter 0 siblings, 1 reply; 21+ messages in thread From: Tim Gardner @ 2009-11-12 18:56 UTC (permalink / raw) To: Christian Lamparter; +Cc: James Grossmann, linux-wireless Christian Lamparter wrote: > On Friday 06 November 2009 21:52:42 James Grossmann wrote: >> my caps lock & scroll lock leds are not blinking, and yet the computer >> is frozen. (I'm not the best at terminology, I guess that might not >> be defined as a hard lock.) I get no odd messages in my syslog. I am >> using Ubuntu right now, so I'm guessing that they have all the >> prettyness going that they can, covering the important messages, but >> as it's not an actual oops, I'm not certain that's hurting us. > just a update: > > I can confirm the freeze with ubuntu 9.10 (2.6.31-14 & 2.6.31-15-generic) > + compat-wireless + p54pci (either as backport module or compiled from git). > The original modules (shipped with 2.6.31-14/15) are fine though..?! > > Regards, > Chr > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html The Ubuntu Karmic linux-backports-modules package is based on compat-wireless-2.6.32-rc4. I'm wondering if its something specific to the p54pci driver? I'm using iwlagn (4965) from that package with no problems (so far). Its not clear what version of stable compat-wireless you've tried. Does compat-wireless-2.6.32-rc6 exhibit the same problem? rtg -- Tim Gardner tim.gardner@canonical.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-12 18:56 ` Prism54/p54pci Tim Gardner @ 2009-11-12 19:37 ` Christian Lamparter 2009-11-12 19:45 ` Prism54/p54pci Luis R. Rodriguez 2009-11-12 19:54 ` Prism54/p54pci Tim Gardner 0 siblings, 2 replies; 21+ messages in thread From: Christian Lamparter @ 2009-11-12 19:37 UTC (permalink / raw) To: tim.gardner; +Cc: James Grossmann, linux-wireless On Thursday 12 November 2009 19:56:30 Tim Gardner wrote: > Christian Lamparter wrote: > > On Friday 06 November 2009 21:52:42 James Grossmann wrote: > >> my caps lock & scroll lock leds are not blinking, and yet the computer > >> is frozen. (I'm not the best at terminology, I guess that might not > >> be defined as a hard lock.) I get no odd messages in my syslog. I am > >> using Ubuntu right now, so I'm guessing that they have all the > >> prettyness going that they can, covering the important messages, but > >> as it's not an actual oops, I'm not certain that's hurting us. > > just a update: > > > > I can confirm the freeze with ubuntu 9.10 (2.6.31-14 & 2.6.31-15-generic) > > + compat-wireless + p54pci (either as backport module or compiled from git). > > The original modules (shipped with 2.6.31-14/15) are fine though..?! > > The Ubuntu Karmic linux-backports-modules package is based on > compat-wireless-2.6.32-rc4. I'm wondering if its something specific to > the p54pci driver? I'm using iwlagn (4965) from that package with no > problems (so far). I put a ath5k card into the same machine and tried with the same compat-wireless modules. Surprise, surprise: no problems... The affected device works fine with the current wireless-testing(pulled today) and a vanilla 2.6.31.6 + compat-wireless (from today's git). I've no idea what voodoo is going on here, maybe there is something wrong in compat-wireless pci glue code (if there's any?!) > Its not clear what version of stable compat-wireless you've tried. > Does compat-wireless-2.6.32-rc6 exhibit the same problem? "compiled from git", which should be compat-wireless-2009-11-12.tar.bz2 and therefore -rc6. Regards, Chr ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-12 19:37 ` Prism54/p54pci Christian Lamparter @ 2009-11-12 19:45 ` Luis R. Rodriguez 2009-11-12 19:54 ` Prism54/p54pci Tim Gardner 1 sibling, 0 replies; 21+ messages in thread From: Luis R. Rodriguez @ 2009-11-12 19:45 UTC (permalink / raw) To: Christian Lamparter; +Cc: tim.gardner, James Grossmann, linux-wireless On Thu, Nov 12, 2009 at 11:37 AM, Christian Lamparter <chunkeey@googlemail.com> wrote: > On Thursday 12 November 2009 19:56:30 Tim Gardner wrote: >> Christian Lamparter wrote: >> > On Friday 06 November 2009 21:52:42 James Grossmann wrote: >> >> my caps lock & scroll lock leds are not blinking, and yet the computer >> >> is frozen. (I'm not the best at terminology, I guess that might not >> >> be defined as a hard lock.) I get no odd messages in my syslog. I am >> >> using Ubuntu right now, so I'm guessing that they have all the >> >> prettyness going that they can, covering the important messages, but >> >> as it's not an actual oops, I'm not certain that's hurting us. >> > just a update: >> > >> > I can confirm the freeze with ubuntu 9.10 (2.6.31-14 & 2.6.31-15-generic) >> > + compat-wireless + p54pci (either as backport module or compiled from git). >> > The original modules (shipped with 2.6.31-14/15) are fine though..?! >> >> The Ubuntu Karmic linux-backports-modules package is based on >> compat-wireless-2.6.32-rc4. I'm wondering if its something specific to >> the p54pci driver? I'm using iwlagn (4965) from that package with no >> problems (so far). > > I put a ath5k card into the same machine and tried with the same > compat-wireless modules. Surprise, surprise: no problems... > > The affected device works fine with the current wireless-testing(pulled today) > and a vanilla 2.6.31.6 + compat-wireless (from today's git). > > I've no idea what voodoo is going on here, maybe there is > something wrong in compat-wireless pci glue code (if there's any?!) Should be easy to debug, the compat 2.6.31 code is in compat/compat-2.6.32.[ch] and since there is no 2.6.33 yet that is all. That and of course any ifdef which applies on the compat/patches/. >> Its not clear what version of stable compat-wireless you've tried. >> Does compat-wireless-2.6.32-rc6 exhibit the same problem? > "compiled from git", which should be compat-wireless-2009-11-12.tar.bz2 > and therefore -rc6. Well no, I believe what Tim means is the stable compat-wireless releases which are not based on master git on compat-wireless. These are based on a branch for the specific stable kernel. The stable compat-wireless releases use hpa's tree: git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-allstable.git and I checkout specific 2.6.3x.y branches. So for 2.6.32 I just use master though which is based on Linus' tree and the latest *stable* 2.6.32-rcx. Luis ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-12 19:37 ` Prism54/p54pci Christian Lamparter 2009-11-12 19:45 ` Prism54/p54pci Luis R. Rodriguez @ 2009-11-12 19:54 ` Tim Gardner 2009-11-13 1:49 ` Prism54/p54pci Luis R. Rodriguez 1 sibling, 1 reply; 21+ messages in thread From: Tim Gardner @ 2009-11-12 19:54 UTC (permalink / raw) To: Christian Lamparter; +Cc: James Grossmann, linux-wireless Christian Lamparter wrote: > On Thursday 12 November 2009 19:56:30 Tim Gardner wrote: >> Christian Lamparter wrote: >>> On Friday 06 November 2009 21:52:42 James Grossmann wrote: >>>> my caps lock & scroll lock leds are not blinking, and yet the computer >>>> is frozen. (I'm not the best at terminology, I guess that might not >>>> be defined as a hard lock.) I get no odd messages in my syslog. I am >>>> using Ubuntu right now, so I'm guessing that they have all the >>>> prettyness going that they can, covering the important messages, but >>>> as it's not an actual oops, I'm not certain that's hurting us. >>> just a update: >>> >>> I can confirm the freeze with ubuntu 9.10 (2.6.31-14 & 2.6.31-15-generic) >>> + compat-wireless + p54pci (either as backport module or compiled from git). >>> The original modules (shipped with 2.6.31-14/15) are fine though..?! >> The Ubuntu Karmic linux-backports-modules package is based on >> compat-wireless-2.6.32-rc4. I'm wondering if its something specific to >> the p54pci driver? I'm using iwlagn (4965) from that package with no >> problems (so far). > > I put a ath5k card into the same machine and tried with the same > compat-wireless modules. Surprise, surprise: no problems... > > The affected device works fine with the current wireless-testing(pulled today) > and a vanilla 2.6.31.6 + compat-wireless (from today's git). > > I've no idea what voodoo is going on here, maybe there is > something wrong in compat-wireless pci glue code (if there's any?!) > >> Its not clear what version of stable compat-wireless you've tried. >> Does compat-wireless-2.6.32-rc6 exhibit the same problem? > "compiled from git", which should be compat-wireless-2009-11-12.tar.bz2 > and therefore -rc6. > Just to be clear, the current wireless-testing is not at all the same as 2.6.32-rc6. Its my understanding that wireless-testing is John's crack-of-the-day merge window test repository. Anyway, I'm updating the Ubuntu LBM package to use compat-wireless-2.6.32-rc6 which should be out by tomorrow. This combination should closely resemble vanilla 2.6.31.6 + compat-wireless. rtg -- Tim Gardner tim.gardner@canonical.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Prism54/p54pci 2009-11-12 19:54 ` Prism54/p54pci Tim Gardner @ 2009-11-13 1:49 ` Luis R. Rodriguez 0 siblings, 0 replies; 21+ messages in thread From: Luis R. Rodriguez @ 2009-11-13 1:49 UTC (permalink / raw) To: tim.gardner; +Cc: Christian Lamparter, James Grossmann, linux-wireless On Thu, Nov 12, 2009 at 11:54 AM, Tim Gardner <tim.gardner@canonical.com> > Anyway, I'm updating the Ubuntu LBM package to use > compat-wireless-2.6.32-rc6 which should be out by tomorrow. rc7 was just released, and so was compat-wireless-2.6.32-rc7. Luis ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2009-11-13 1:49 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-07 21:00 Prism54/p54pci James Grossmann
2009-10-08 16:28 ` Prism54/p54pci Larry Finger
2009-10-27 18:37 ` Prism54/p54pci Luis R. Rodriguez
[not found] ` <167ae39b0910310615k5475e5cp55d1c0d60e7a443b@mail.gmail.com>
2009-10-31 13:26 ` Prism54/p54pci Luis R. Rodriguez
2009-10-31 14:11 ` Prism54/p54pci James Grossmann
2009-10-31 21:24 ` Prism54/p54pci Christian Lamparter
2009-11-02 5:07 ` Prism54/p54pci James Grossmann
[not found] ` <200911021611.37354.chunkeey@googlemail.com>
[not found] ` <167ae39b0911060900i2c8f4a78w4edecdcec36f1a38@mail.gmail.com>
2009-11-06 17:48 ` Prism54/p54pci Christian Lamparter
2009-11-06 18:45 ` Prism54/p54pci James Grossmann
2009-11-06 19:14 ` Prism54/p54pci Christian Lamparter
2009-11-06 19:37 ` Prism54/p54pci James Grossmann
2009-11-06 20:33 ` Prism54/p54pci Christian Lamparter
2009-11-06 20:52 ` Prism54/p54pci James Grossmann
2009-11-06 21:45 ` Prism54/p54pci Christian Lamparter
2009-11-06 22:17 ` Prism54/p54pci James Grossmann
2009-11-12 16:17 ` Prism54/p54pci Christian Lamparter
2009-11-12 18:56 ` Prism54/p54pci Tim Gardner
2009-11-12 19:37 ` Prism54/p54pci Christian Lamparter
2009-11-12 19:45 ` Prism54/p54pci Luis R. Rodriguez
2009-11-12 19:54 ` Prism54/p54pci Tim Gardner
2009-11-13 1:49 ` Prism54/p54pci Luis R. Rodriguez
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).