From: Paulius Zaleckas <paulius.zaleckas@gmail.com>
To: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>,
linux-wireless@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [RFC] usb: Check results of dma_map_single
Date: Wed, 04 Nov 2009 14:50:12 +0200 [thread overview]
Message-ID: <4AF17884.5000200@gmail.com> (raw)
In-Reply-To: <4af115c3.JUDAYfcydqPYCYyH%Larry.Finger@lwfinger.net>
On 11/04/2009 07:48 AM, Larry Finger wrote:
> At http://marc.info/?l=linux-wireless&m=125695331205062&w=2, a problem
> with DMA buffer processing was corrected for the libertas driver. Because
> routine usb_fill_bulk_urb() does not check that DMA is possible when
> dma_map_single() is called, this condition was not detected until the buffer
> was unmapped. By this time memory corruption had occurred.
>
> The situation is fixed by testing the returned DMA address. If not a legal
> address, a WARN_ON(1) is executed to provide traceback and the error is
> returned.
>
> Signed-off-by: Larry Finger<Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> ---
>
> Index: linux-2.6/drivers/usb/core/hcd.c
> ===================================================================
> --- linux-2.6.orig/drivers/usb/core/hcd.c
> +++ linux-2.6/drivers/usb/core/hcd.c
> @@ -1281,6 +1281,13 @@ static int map_urb_for_dma(struct usb_hc
> urb->setup_packet,
> sizeof(struct usb_ctrlrequest),
> DMA_TO_DEVICE);
> + ret = dma_mapping_error(hcd->self.controller,
> + urb->setup_dma);
> + /* warn if DMA mapping failed */
> + if (ret) {
> + WARN_ON(1);
> + return ret;
> + }
First of all you forgot to add { } around everything under if statement.
I don't think WARN_ON is needed...
dma_mapping_error under most architectures return 0 or 1 so it would be
better to make some real error value. EAGAIN seems to be proper error,
since documentation says that driver should try again later.
I would write this error handler like this:
if (dma_mapping_error(hcd->self.controller, urb->setup_dma))
ret = -EAGAIN;
> else if (hcd->driver->flags& HCD_LOCAL_MEM)
> ret = hcd_alloc_coherent(
> urb->dev->bus, mem_flags,
> @@ -1299,6 +1306,13 @@ static int map_urb_for_dma(struct usb_hc
> urb->transfer_buffer,
> urb->transfer_buffer_length,
> dir);
> + ret = dma_mapping_error(hcd->self.controller,
> + urb->transfer_dma);
> + /* warn if DMA mapping failed */
> + if (ret) {
> + WARN_ON(1);
> + return ret;
> + }
ditto
> else if (hcd->driver->flags& HCD_LOCAL_MEM) {
> ret = hcd_alloc_coherent(
> urb->dev->bus, mem_flags,
next prev parent reply other threads:[~2009-11-04 13:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-04 5:48 [RFC] usb: Check results of dma_map_single Larry Finger
2009-11-04 12:50 ` Paulius Zaleckas [this message]
2009-11-04 14:06 ` Larry Finger
2009-11-04 14:51 ` Michael Buesch
2009-11-04 15:16 ` Larry Finger
2009-11-04 19:49 ` Christian Lamparter
2009-11-05 2:41 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AF17884.5000200@gmail.com \
--to=paulius.zaleckas@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@suse.de \
--cc=linux-usb@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).