Re: [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver.

[Gertjan van Wingerde <gwingerde@gmail.com>]

On 04/09/10 07:10, Gertjan van Wingerde wrote:
> On 04/09/10 00:28, Felix Fietkau wrote:
>> On 2010-04-08 11:50 PM, Gertjan van Wingerde wrote:
>>> Only include definitions for RT chipsets that are also used inside the
>>> Ralink vendor drivers.
>>>
>>> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
>>> ---
>>>  drivers/net/wireless/rt2x00/rt2800lib.c |   13 -------------
>>>  drivers/net/wireless/rt2x00/rt2x00.h    |    7 +++----
>>>  2 files changed, 3 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
>>> index 394c8e4..4bc7e09 100644
>>> --- a/drivers/net/wireless/rt2x00/rt2800lib.c
>>> +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
>>> @@ -1209,10 +1209,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
>>>  	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
>>>  	if ((rt2x00_rt(rt2x00dev, RT2872) &&
>>>  	     (rt2x00_rev(rt2x00dev) >= RT2880E_VERSION)) ||
>>> -	    rt2x00_rt(rt2x00dev, RT2880) ||
>>>  	    rt2x00_rt(rt2x00dev, RT2883) ||
>>> -	    rt2x00_rt(rt2x00dev, RT2890) ||
>>> -	    rt2x00_rt(rt2x00dev, RT3052) ||
>>>  	    (rt2x00_rt(rt2x00dev, RT3070) &&
>>>  	     (rt2x00_rev(rt2x00dev) < RT3070_VERSION)))
>>>  		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
>>> @@ -1511,12 +1508,6 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
>>>  		rt2800_bbp_write(rt2x00dev, 105, 0x05);
>>>  	}
>>>  
>>> -	if (rt2x00_rt(rt2x00dev, RT3052)) {
>>> -		rt2800_bbp_write(rt2x00dev, 31, 0x08);
>>> -		rt2800_bbp_write(rt2x00dev, 78, 0x0e);
>>> -		rt2800_bbp_write(rt2x00dev, 80, 0x08);
>>> -	}
>>> -
>> Why are you removing support for RT3052? IMHO those writes were
>> necessary, last time I tested the rt2800pci code on the RT3052 WiSoC.
> 
> That is because I have not been able to find them in any of the Ralink vendor drivers.
> Actually, none of the Ralink vendor drivers mention an RT chipset that identifies itself
> as a RT3052. The only mentioning Ive seen is RT305x devices that identify themselves as
> RT2872 devices, but even for them I haven't found these BBP initializations.
> That's why I removed this part.
> 
> I have no problem re-instating this if I can find some evidence that these devices
> actually exist.
> 

Hold on, I seem to have found something here. And there are more things to be set, according
to the code I found. However, that code is unclear with respect to how the chip identifies
itself.

Is it possible for you to found out on you RT3052 WiSoC how the chip identifies itself
(i.e. what is the contents of the MAC_CSR0 register)?

Helmut, Luis, I know you guys have been experimenting with WiSoC devices as well, what kind
of devices do you have, and how do these identify themselves?

---
Gertjan