From: Philip Prindeville <philipp_subx@redfish-solutions.com>
To: linux-wireless@vger.kernel.org
Subject: Re: Ath5k breaking in ath5k_pci_suspend_compat going on 2 weeks
Date: Sun, 11 Jul 2010 11:53:47 -0600 [thread overview]
Message-ID: <4C3A052B.4040602@redfish-solutions.com> (raw)
In-Reply-To: <4C395F03.40200@redfish-solutions.com>
The latest revision that I could build was 2010-06-02, and that panics
the box:
ompat-wireless backport release: compat-wireles-20100526-1-g9a89e44
Backport based on linux-next.git next-20100526
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath5k 0000:00:11.0: registered as 'phy0'
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<00000000>]
*pde = 00000000
Oops: 0000 [#1] PREEMPT
Modules linked in: ath5k(+) mac80211 ath cfg80211 rfkill_backport compat dahdi s
ha512_generic sha256_generic deflate zlib_deflate arc4 ecb sha1_generic blowfish
des_generic cbc cryptosoft cryptodev(P) ocf(P) geodewdt geode_rng geode_aes cry
pto_blkcipher via_rhine rtc cs5535_gpio
Pid: 1438, comm: modprobe Tainted: P (2.6.27.48-astlinux #1)
EIP: 0060:[<00000000>] EFLAGS: 00010286 CPU: 0
EIP is at 0x0
EAX: cea68000 EBX: cf9b3490 ECX: 00000000 EDX: 00000000
ESI: cea68154 EDI: cea83be0 EBP: cea68000 ESP: cea87cec
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process modprobe (pid: 1438, ti=cea86000 task=cf994460 task.ti=cea86000)
Stack: c0259ceb cf9b3400 cea87cf4 cea87cf4 00000000 00000000 00000000 00000000
00000000 00000000 00000000 000005dc cea68000 cea83be0 ffffffff 00000010
c025a0e2 00000000 00000000 ffffffff 00000000 c034e8cc ffffffff 00000000
Call Trace:
[<c0259ceb>] rtnl_fill_ifinfo+0x2a8/0x45e
[<c025a0e2>] rtmsg_ifinfo+0x40/0xa7
[<c025a17e>] rtnetlink_event+0x35/0x38
[<c02aa0ab>] notifier_call_chain+0x2a/0x47
[<c012716e>] raw_notifier_call_chain+0x9/0xc
[<c0252ee8>] register_netdevice+0x228/0x25d
[<d09449d3>] ieee80211_if_add+0x60e/0x704 [mac80211]
[<c015fff4>] alloc_inode+0xda/0x150
[<c01b8bd8>] debugfs_mknod+0x10d/0x119
[<c0115cfb>] printk+0x14/0x18
[<d09453eb>] ieee80211_init_rate_ctrl_alg+0x18b/0x1b4 [mac80211]
[<d093992a>] ieee80211_register_hw+0x28c/0x320 [mac80211]
[<d08c6742>] ath5k_pci_probe+0xb03/0xde2 [ath5k]
[<c01da23c>] pci_device_probe+0x36/0x55
[<c01f7f8b>] driver_probe_device+0x9c/0x112
[<c01f8038>] __driver_attach+0x37/0x55
[<c01f7911>] bus_for_each_dev+0x31/0x52
[<c01f7e3f>] driver_attach+0x11/0x13
[<c01f8001>] __driver_attach+0x0/0x55
[<c01f7c5d>] bus_add_driver+0x91/0x194
[<d086e000>] init_ath5k_pci+0x0/0x2f [ath5k]
[<c01f8239>] driver_register+0x6d/0xc2
[<d086e000>] init_ath5k_pci+0x0/0x2f [ath5k]
[<c01da2fe>] __pci_register_driver+0x35/0x60
[<d086e01a>] init_ath5k_pci+0x1a/0x2f [ath5k]
[<c0101037>] _stext+0x37/0xfb
[<c013068d>] sys_init_module+0x87/0x176
[<c01037e6>] syscall_call+0x7/0xb
=======================
Code: Bad EIP value.
EIP: [<00000000>] 0x0 SS:ESP 0068:cea87cec
---[ end trace d08207f47ddcaa64 ]---
/etc/runlevels/default/S02wifi: line 11: 1438 Segmentation fault modprobe
$i
Configuring WiFi cards...
On 7/11/10 12:04 AM, Philip Prindeville wrote:
> I take it back... it seems to go back at least to 2010-06-12.
>
>
> On 7/10/10 8:05 PM, Philip Prindeville wrote:
>> This still seems to be broken, a couple of weeks later:
>>
>> CC [M]
>> /home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/attach.o
>>
>> CC [M]
>> /home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/base.o
>>
>> /home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/base.c:243:
>> error: 'ath5k_pci_suspend_compat' undeclared here (not in a function)
>> /home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/base.c:244:
>> error: 'ath5k_pci_resume_compat' undeclared here (not in a function)
>> make[6]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/base.o]
>> Error 1
>> make[5]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k]
>> Error 2
>> make[4]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath]
>> Error 2
>> make[3]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless]
>> Error 2
>>
>>
>> and from today's tarball:
>>
>>
>> CC [M]
>> /home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k/base.o
>>
>> /home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k/base.c:243:
>> error: 'ath5k_pci_suspend_compat' undeclared here (not in a function)
>> /home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k/base.c:244:
>> error: 'ath5k_pci_resume_compat' undeclared here (not in a function)
>> make[6]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k/base.o]
>> Error 1
>> make[5]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k]
>> Error 2
>> make[4]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath]
>> Error 2
>> make[3]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless]
>> Error 2
>>
>>
>> Can someone please have a look and fix their regression?
>>
>> Thanks,
>>
>> -Philip
>
next prev parent reply other threads:[~2010-07-11 17:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-11 2:05 Ath5k breaking in ath5k_pci_suspend_compat going on 2 weeks Philip Prindeville
2010-07-11 6:04 ` Philip Prindeville
2010-07-11 17:53 ` Philip Prindeville [this message]
2010-07-12 13:43 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C3A052B.4040602@redfish-solutions.com \
--to=philipp_subx@redfish-solutions.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).