From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.candelatech.com ([208.74.158.172]:57790 "EHLO ns3.lanforge.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753863Ab0HYP7W (ORCPT ); Wed, 25 Aug 2010 11:59:22 -0400 Message-ID: <4C753DD0.9040702@candelatech.com> Date: Wed, 25 Aug 2010 08:59:12 -0700 From: Ben Greear MIME-Version: 1.0 To: Wei Qiang , "linux-wireless@vger.kernel.org" Subject: Re: AR7240 VLAN setup References: In-Reply-To: Content-Type: text/plain; charset=windows-1252; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 08/25/2010 02:13 AM, Wei Qiang wrote: > *Hi, Ben,* > > * * > > * Sorry for bother.* > > * * > > * I have a question about how to setup 802.1Q VLAN on AR7240, and can’t get any answer for days. When I googled “802.1q ar7240”, I noticed that you were the > supporter of 802.1q module. It seems that you are the only one who may help me resolve the problem now. Support from Atheros is poor.* You might try the linux wireless mailing list: "linux-wireless@vger.kernel.org" I have only messed with VLANs on wired interfaces. Thanks, Ben > > * * > > * The problem itself is quite straight forward: * > > * * > > *1. All packets to ingress LAN port should have a VLAN tag added, or the tag should be removed at egress LAN port.* > > * 2. WAN port will transmit all packets unmodified.* > > * * > > * If you may have an instruction of how to set AR7240 up, or have some related documents to me, that will be great.* > > * * > > * I have tried different combinations of those registers, but none of them works.* > > * * > > * This issue is very important for me, and your help is highly appreciated!* > > * * > > *Thanks and regards,* > > * * > > *Wei* > -- Ben Greear Candela Technologies Inc http://www.candelatech.com