From: Felix Fietkau <nbd@openwrt.org>
To: linux-wireless <linux-wireless@vger.kernel.org>
Cc: "Luis R. Rodriguez" <lrodriguez@atheros.com>,
"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH] ath9k: fix channel flag / regd issues with multiple cards
Date: Fri, 01 Oct 2010 01:06:53 +0200 [thread overview]
Message-ID: <4CA5180D.3010702@openwrt.org> (raw)
Since the regulatory code touches the channel array, it needs to be
copied for each device instance. That way the original channel array
can also be made const.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org [all]
---
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -57,7 +57,7 @@ MODULE_PARM_DESC(blink, "Enable LED blin
* on 5 MHz steps, we support the channels which we know
* we have calibration data for all cards though to make
* this static */
-static struct ieee80211_channel ath9k_2ghz_chantable[] = {
+static const struct ieee80211_channel ath9k_2ghz_chantable[] = {
CHAN2G(2412, 0), /* Channel 1 */
CHAN2G(2417, 1), /* Channel 2 */
CHAN2G(2422, 2), /* Channel 3 */
@@ -78,7 +78,7 @@ static struct ieee80211_channel ath9k_2g
* on 5 MHz steps, we support the channels which we know
* we have calibration data for all cards though to make
* this static */
-static struct ieee80211_channel ath9k_5ghz_chantable[] = {
+static const struct ieee80211_channel ath9k_5ghz_chantable[] = {
/* _We_ call this UNII 1 */
CHAN5G(5180, 14), /* Channel 36 */
CHAN5G(5200, 15), /* Channel 40 */
@@ -478,10 +478,17 @@ err:
return -EIO;
}
-static void ath9k_init_channels_rates(struct ath_softc *sc)
+static int ath9k_init_channels_rates(struct ath_softc *sc)
{
+ void *channels;
+
if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
- sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
+ channels = kmemdup(ath9k_2ghz_chantable,
+ sizeof(ath9k_2ghz_chantable), GFP_KERNEL);
+ if (!channels)
+ return -ENOMEM;
+
+ sc->sbands[IEEE80211_BAND_2GHZ].channels = channels;
sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
ARRAY_SIZE(ath9k_2ghz_chantable);
@@ -491,7 +498,15 @@ static void ath9k_init_channels_rates(st
}
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
- sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
+ channels = kmemdup(ath9k_5ghz_chantable,
+ sizeof(ath9k_5ghz_chantable), GFP_KERNEL);
+ if (!channels) {
+ if (sc->sbands[IEEE80211_BAND_2GHZ].channels)
+ kfree(sc->sbands[IEEE80211_BAND_2GHZ].channels);
+ return -ENOMEM;
+ }
+
+ sc->sbands[IEEE80211_BAND_5GHZ].channels = channels;
sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
ARRAY_SIZE(ath9k_5ghz_chantable);
@@ -500,6 +515,7 @@ static void ath9k_init_channels_rates(st
sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
ARRAY_SIZE(ath9k_legacy_rates) - 4;
}
+ return 0;
}
static void ath9k_init_misc(struct ath_softc *sc)
@@ -602,8 +618,11 @@ static int ath9k_init_softc(u16 devid, s
if (ret)
goto err_btcoex;
+ ret = ath9k_init_channels_rates(sc);
+ if (ret)
+ goto err_btcoex;
+
ath9k_init_crypto(sc);
- ath9k_init_channels_rates(sc);
ath9k_init_misc(sc);
return 0;
@@ -784,6 +803,12 @@ static void ath9k_deinit_softc(struct at
{
int i = 0;
+ if (sc->sbands[IEEE80211_BAND_2GHZ].channels)
+ kfree(sc->sbands[IEEE80211_BAND_2GHZ].channels);
+
+ if (sc->sbands[IEEE80211_BAND_5GHZ].channels)
+ kfree(sc->sbands[IEEE80211_BAND_5GHZ].channels);
+
if ((sc->btcoex.no_stomp_timer) &&
sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
ath_gen_timer_free(sc->sc_ah, sc->btcoex.no_stomp_timer);
next reply other threads:[~2010-09-30 23:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-30 23:06 Felix Fietkau [this message]
2010-09-30 23:37 ` [PATCH] ath9k: fix channel flag / regd issues with multiple cards Felix Fietkau
2010-10-01 14:51 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CA5180D.3010702@openwrt.org \
--to=nbd@openwrt.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).