From: Felix Fietkau <nbd@openwrt.org>
To: linux-wireless <linux-wireless@vger.kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>,
"Luis R. Rodriguez" <lrodriguez@atheros.com>
Subject: [PATCH] ath9k_hw: remove some useless calibration data
Date: Fri, 01 Oct 2010 01:46:13 +0200 [thread overview]
Message-ID: <4CA52145.6050200@openwrt.org> (raw)
The percal struct and bitmask for the initial DC calibration are not
used anywhere, so they can be removed.
Signed-off-by: Felix Fietkau <nbd@openwrt.org
---
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -45,11 +45,6 @@ static void ar9002_hw_setup_calibration(
ath_print(common, ATH_DBG_CALIBRATE,
"starting ADC DC Calibration\n");
break;
- case ADC_DC_INIT_CAL:
- REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_INIT);
- ath_print(common, ATH_DBG_CALIBRATE,
- "starting Init ADC DC Calibration\n");
- break;
case TEMP_COMP_CAL:
break; /* Not supported */
}
@@ -950,13 +945,6 @@ static const struct ath9k_percal_data ad
ar9002_hw_adc_dccal_collect,
ar9002_hw_adc_dccal_calibrate
};
-static const struct ath9k_percal_data adc_init_dc_cal = {
- ADC_DC_INIT_CAL,
- MIN_CAL_SAMPLES,
- INIT_LOG_COUNT,
- ar9002_hw_adc_dccal_collect,
- ar9002_hw_adc_dccal_calibrate
-};
static void ar9002_hw_init_cal_settings(struct ath_hw *ah)
{
@@ -973,16 +961,12 @@ static void ar9002_hw_init_cal_settings(
&adc_gain_cal_single_sample;
ah->adcdc_caldata.calData =
&adc_dc_cal_single_sample;
- ah->adcdc_calinitdata.calData =
- &adc_init_dc_cal;
} else {
ah->iq_caldata.calData = &iq_cal_multi_sample;
ah->adcgain_caldata.calData =
&adc_gain_cal_multi_sample;
ah->adcdc_caldata.calData =
&adc_dc_cal_multi_sample;
- ah->adcdc_calinitdata.calData =
- &adc_init_dc_cal;
}
ah->supp_cals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
}
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -50,7 +50,6 @@ static void ar9003_hw_setup_calibration(
ath_print(common, ATH_DBG_CALIBRATE,
"starting Temperature Compensation Calibration\n");
break;
- case ADC_DC_INIT_CAL:
case ADC_GAIN_CAL:
case ADC_DC_CAL:
/* Not yet */
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -59,7 +59,6 @@ struct ar5416IniArray {
} while (0)
enum ath9k_cal_types {
- ADC_DC_INIT_CAL = 0x1,
ADC_GAIN_CAL = 0x2,
ADC_DC_CAL = 0x4,
IQ_MISMATCH_CAL = 0x8,
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -692,7 +692,6 @@ struct ath_hw {
enum ath9k_cal_types supp_cals;
struct ath9k_cal_list iq_caldata;
struct ath9k_cal_list adcgain_caldata;
- struct ath9k_cal_list adcdc_calinitdata;
struct ath9k_cal_list adcdc_caldata;
struct ath9k_cal_list tempCompCalData;
struct ath9k_cal_list *cal_list;
reply other threads:[~2010-09-30 23:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CA52145.6050200@openwrt.org \
--to=nbd@openwrt.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).