From: Alexander Khryukin <alexander@mezon.ru>
To: linux-wireless@vger.kernel.org
Subject: Re: wimaxd daemon bug
Date: Fri, 17 Dec 2010 16:58:08 +0300 [thread overview]
Message-ID: <4D0B6C70.5080200@mezon.ru> (raw)
In-Reply-To: <4D0A1DB8.7080108@mezon.ru>
16.12.2010 17:10, Alexander Khryukin пишет:
> Good day.
> I have
> 1.MeeGo 1.1
> 2.Intel Corporation WiMAX/WiFi Link 6050 Series (rev 2c)
> 3.Wimax network that named 'Yota'
>
>
> wimaxcu scan wide
> WARNING: Wide scan may take upto 2 minutes...
> NSP : Yota
> ID : 21
> Signal : Excellent
> RSSI : -62 dBm
> CINR : 29 dB
> Network Type: Home Network
> Activated.
>
>
>
> Then i try to connect with Yota-network
>
> wimaxcu connect network 21
> Connecting to Yota Network...
> Connection successful
>
> [root@meego-desktop ~]# /usr/bin/wimaxd -d -i wmx0
> Enter Command:
> q - Quit AppSrv
> t - Trace ReInit (ReLoads Registry Values)
> u - uplink(Apdo uplink event
> h - Help
> d - Toggle driver messages to display - debug & internal only
>
>
> AppSrv is ready !
> Act_FullRestart!
> Act_DriverDeviceStatus - DRIVER_UP
> CTRL-EVENT-EAP-STARTED EAP authentication started
> Sending EapResponse. Data size: 25
> CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
> CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
> Sending EapResponse. Data size: 60
> Sending EapResponse. Data size: 60
> Sending EapResponse. Data size: 6
> Sending EapResponse. Data size: 6
> Sending EapResponse. Data size: 1310
> Sending EapResponse. Data size: 1144
> Sending EapResponse. Data size: 6
> CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
> CTRL-EVENT-EAP-STARTED EAP authentication started
> Sending EapResponse. Data size: 17
> CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
> CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
> Sending EapResponse. Data size: 60
> Sending EapResponse. Data size: 6
> Sending EapResponse. Data size: 6
> Sending EapResponse. Data size: 1310
> Sending EapResponse. Data size: 1144
> Sending EapResponse. Data size: 6
>
>
> Then i try to reconnect
>
> [root@meego-desktop ~]# wimaxcu connect network 21
> Current Preferred Profile is:
> ID : 21
> Name: Yota
> Connecting to Yota Network...
> Connection failure
>
>
> Next i try to
>
> wimaxll -i wmx0 reset
> and start daemon again
>
> /usr/bin/wimaxd -d -i wmx0
>
> Connect to network
>
> imaxcu connect network 21
> Current Preferred Profile is:
> ID : 21
> Name: Yota
> Connecting to Yota Network...
> Connection successful
>
>
> Wimaxd version wimax-1.5.1-35.13.i586.rpm
> from Inaky Perez-Gonzalez repo.
> http://download.meego.com/live/home:/inaky:/pegatron-idf-2010/Trunk/i586/
>
>
> uname -a
> Linux meego-desktop 2.6.36-1.9_mezon.12.1-netbook #1 SMP PREEMPT Wed Dec
> 15 20:01:48 MSK 2010 i686 i686 i386 GNU/Linux
>
>
>
> steps to reproduce:
> 1.Plug on Intel Corporation WiMAX/WiFi Link 6050 Series (rev 2c)
> 2.Install any version on wimaxd
> 3.wimaxcu connect any_network_id
> 4.wait about 2 minutes
> 5.connection dropped.
> 6.try connect again, and see "connection failure"
> 7.wimaxll -i wmx0 rese
> 8.connect to network again (it will be succeeded)
> 9.Proceed to step 4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Additional report.
[root@meego-desktop ~]# /usr/bin/wimaxd -d -i wmx0
Enter Command:
q - Quit AppSrv
t - Trace ReInit (ReLoads Registry Values)
u - uplink(Apdo uplink event
h - Help
d - Toggle driver messages to display - debug & internal only
AppSrv is ready !
Act_FullRestart!
Act_DriverDeviceStatus - DRIVER_UP
/var/log/wimax/wimaxd.log
http://pastebin.ca/2022059
And wait for 2 minutes
Now connection dropped in log nothing interesting not dropped
[root@meego-desktop ~]# wimaxcu connect network 21
Current Preferred Profile is:
ID : 21
Name: Yota
Connecting to Yota Network...
Connection failure
In log
http://pastebin.ca/2022057
next prev parent reply other threads:[~2010-12-17 13:58 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-13 11:31 [PATCH 01/17] rt2x00: Add rt2800 EEPROM definition Ivo van Doorn
2010-12-13 11:31 ` [PATCH 02/17] rt2x00: Implement get_survey callback for rt2800 Ivo van Doorn
2010-12-13 11:32 ` [PATCH 03/17] rt2x00: Add RF chip definition Ivo van Doorn
2010-12-13 11:32 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Ivo van Doorn
2010-12-13 11:33 ` [PATCH 05/17] rt2x00: Ensure TX-ed frames are returned in the original state Ivo van Doorn
2010-12-13 11:33 ` [PATCH 06/17] rt2x00: Don't frequently reset beacon interval in AdHoc mode Ivo van Doorn
2010-12-13 11:34 ` [PATCH 07/17] rt2x00: trivial: add missing \n on warnings Ivo van Doorn
2010-12-13 11:34 ` [PATCH 08/17] rt2x00: Introduce 3 queue commands in drivers (start, kick, stop) Ivo van Doorn
2010-12-13 11:34 ` [PATCH 09/17] rt2x00: Reorganize queue callback functions Ivo van Doorn
2010-12-13 11:35 ` [PATCH 10/17] rt2x00: Protect queue control with mutex Ivo van Doorn
2010-12-13 11:35 ` [PATCH 11/17] rt2x00: Add "flush" queue command Ivo van Doorn
2010-12-13 11:36 ` [PATCH 12/17] rt2x00: Cleanup RX index counting Ivo van Doorn
2010-12-13 11:36 ` [PATCH 13/17] rt2x00: Introduce extra queue entry sanity flag Ivo van Doorn
2010-12-13 11:36 ` [PATCH 14/17] rt2x00: Fix WMM Queue naming Ivo van Doorn
2010-12-13 11:38 ` [PATCH 15/17] rt2x00: remove stray semicolon Ivo van Doorn
2010-12-13 11:39 ` [PATCH 16/17] rt2x00: Pad beacon to multiple of 32 bits Ivo van Doorn
2010-12-13 11:39 ` [PATCH 17/17] rt2x00: Fix firmware loading regression on x86_64 Ivo van Doorn
2010-12-14 17:49 ` [PATCH 14/17] rt2x00: Fix WMM Queue naming Helmut Schaa
2010-12-14 18:44 ` Ivo Van Doorn
2010-12-14 18:57 ` Helmut Schaa
2010-12-14 19:24 ` Johannes Stezenbach
2010-12-15 16:38 ` Ivo Van Doorn
2010-12-13 12:27 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Walter Goldens
2010-12-13 12:36 ` Ivo Van Doorn
2010-12-13 13:16 ` Walter Goldens
2010-12-16 13:04 ` Walter Goldens
2010-12-16 14:10 ` wimaxd daemon bug Alexander Khryukin
2010-12-17 13:58 ` Alexander Khryukin [this message]
2010-12-16 20:43 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Ivo Van Doorn
2010-12-17 11:56 ` Walter Goldens
2010-12-17 15:02 ` Johannes Stezenbach
2010-12-17 16:33 ` Walter Goldens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D0B6C70.5080200@mezon.ru \
--to=alexander@mezon.ru \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).