* hostapd hangs on quit, multi-BSSID scenario
@ 2011-01-07 17:44 Chaoxing Lin
2011-01-07 17:49 ` Ben Greear
2011-01-09 17:26 ` Jouni Malinen
0 siblings, 2 replies; 6+ messages in thread
From: Chaoxing Lin @ 2011-01-07 17:44 UTC (permalink / raw)
To: 'linux-wireless@vger.kernel.org'
Gentlemen,
When I run hostapd with 8+1 BSSID over one radio (ath9160), it runs well. All 9 BSS accepts clients.
But when I "Ctrl + C" or "killall hostapd", hostapd daemon can NOT gracefully shut down. It hangs forever. I have to "Ctrl + C" again. Then it quits and print message like "
I am running latest (as of 01/06/2011) hostapd, latest stable kernel (2.6.37) with one number change in ath9k to allow more than 12 virtual BSS over one radio.
Below is my hostapd-conf and console screenshot. If someone can fix this bug, please help.
Thanks
============================hostapd.conf begin ==============================
interface=wlan0
#bridge=brg0
driver=nl80211
logger_syslog=-1
logger_syslog_level=0
logger_stdout=-1
logger_stdout_level=0
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
##### IEEE 802.11 related configuration #######################################
ssid=bypass
country_code=US
ieee80211d=1
hw_mode=a
channel=36
beacon_int=20
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
bss=vlan2
ssid=ath9160_2
bssid=02:06:6b:b1:b3:08
wpa=2
wpa_passphrase=helloworld_2
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
wpa_ptk_rekey=600
bss=vlan6
ssid=ath9160_6
bssid=06:06:6b:b1:b3:08
wpa=2
wpa_passphrase=helloworld_6
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
wpa_ptk_rekey=600
bss=vlana
ssid=ath9160_a
bssid=0a:06:6b:b1:b3:08
wpa=2
wpa_passphrase=helloworld_a
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
wpa_ptk_rekey=600
bss=vlane
ssid=ath9160_e
bssid=0e:06:6b:b1:b3:08
wpa=2
wpa_passphrase=helloworld_e
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
wpa_ptk_rekey=600
bss=vlan12
ssid=ath9160_12
bssid=12:06:6b:b1:b3:08
wpa=2
wpa_passphrase=helloworld_12
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
wpa_ptk_rekey=600
bss=vlan16
ssid=ath9160_16
bssid=16:06:6b:b1:b3:08
wpa=2
wpa_passphrase=helloworld_16
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
wpa_ptk_rekey=600
bss=vlan1a
ssid=ath9160_1a
bssid=1a:06:6b:b1:b3:08
wpa=2
wpa_passphrase=helloworld_1a
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
wpa_ptk_rekey=600
bss=vlan1e
ssid=ath9160_1e
bssid=1e:06:6b:b1:b3:08
wpa=2
wpa_passphrase=helloworld_1e
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
wpa_ptk_rekey=600
============================hostapd.conf end ==============================
---------------console screenshot-------------------------------------------------------------
root@mini-dell:~/hostapd-conf# hostapd 9VLANs
Configuration file: 9VLANs
Using interface wlan0 with hwaddr 00:0b:6b:b1:b3:08 and ssid 'bypass'
Using interface vlan2 with hwaddr 02:06:6b:b1:b3:08 and ssid 'ath9160_2'
Using interface vlan6 with hwaddr 06:06:6b:b1:b3:08 and ssid 'ath9160_6'
Using interface vlana with hwaddr 0a:06:6b:b1:b3:08 and ssid 'ath9160_a'
Using interface vlane with hwaddr 0e:06:6b:b1:b3:08 and ssid 'ath9160_e'
Using interface vlan12 with hwaddr 12:06:6b:b1:b3:08 and ssid 'ath9160_12'
Using interface vlan16 with hwaddr 16:06:6b:b1:b3:08 and ssid 'ath9160_16'
Using interface vlan1a with hwaddr 1a:06:6b:b1:b3:08 and ssid 'ath9160_1a'
Using interface vlan1e with hwaddr 1e:06:6b:b1:b3:08 and ssid 'ath9160_1e'
AP-STA-DISCONNECTED 00:24:d7:1f:e4:fc
vlan2: STA 00:24:d7:1f:e4:fc IEEE 802.11: did not acknowledge authentication response
vlan2: STA 00:24:d7:1f:e4:fc IEEE 802.11: authenticated
vlan2: STA 00:24:d7:1f:e4:fc IEEE 802.11: associated (aid 1)
AP-STA-CONNECTED 00:24:d7:1f:e4:fc
vlan2: STA 00:24:d7:1f:e4:fc RADIUS: starting accounting session 4D26599C-00000000
vlan2: STA 00:24:d7:1f:e4:fc WPA: pairwise key handshake completed (RSN)
^Cwlan0: STA 00:0b:6b:0a:4e:43 MLME: MLME-DEAUTHENTICATE.indication(00:0b:6b:0a:4e:43, 1)
wlan0: STA 00:0b:6b:0a:4e:43 MLME: MLME-DELETEKEYS.request(00:0b:6b:0a:4e:43)
^Celoop: could not process SIGINT or SIGTERM in two seconds. Looks like there
is a bug that ends up in a busy loop that prevents clean shutdown.
Killing program forcefully.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: hostapd hangs on quit, multi-BSSID scenario
2011-01-07 17:44 hostapd hangs on quit, multi-BSSID scenario Chaoxing Lin
@ 2011-01-07 17:49 ` Ben Greear
2011-01-07 17:58 ` Chaoxing Lin
2011-01-09 17:26 ` Jouni Malinen
1 sibling, 1 reply; 6+ messages in thread
From: Ben Greear @ 2011-01-07 17:49 UTC (permalink / raw)
To: Chaoxing Lin; +Cc: 'linux-wireless@vger.kernel.org'
On 01/07/2011 09:44 AM, Chaoxing Lin wrote:
> Gentlemen,
>
> When I run hostapd with 8+1 BSSID over one radio (ath9160), it runs well. All 9 BSS accepts clients.
> But when I "Ctrl + C" or "killall hostapd", hostapd daemon can NOT gracefully shut down. It hangs forever. I have to "Ctrl + C" again. Then it quits and print message like "
>
> I am running latest (as of 01/06/2011) hostapd, latest stable kernel (2.6.37) with one number change in ath9k to allow more than 12 virtual BSS over one radio.
>
> Below is my hostapd-conf and console screenshot. If someone can fix this bug, please help.
Maybe attach gdb to hostapd and see where it hangs?
Also, what change did you make to ath9k?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: hostapd hangs on quit, multi-BSSID scenario
2011-01-07 17:49 ` Ben Greear
@ 2011-01-07 17:58 ` Chaoxing Lin
2011-01-07 18:07 ` Ben Greear
0 siblings, 1 reply; 6+ messages in thread
From: Chaoxing Lin @ 2011-01-07 17:58 UTC (permalink / raw)
To: 'Ben Greear'; +Cc: 'linux-wireless@vger.kernel.org'
1. I don't know how to use GDB. Consider me entry level developer.
2. It should not be related the change I made on ath9k. The reasons are
a. My change is simple, linux/drivers/net/wireless/ath/ath9k/ath9k.h: change ATH_BCBUF from 4 to 12
b. Without my change, driver accepts up to 3 extra BSSID. But hostapd still hangs on quit. Hostapd quits well if there only one extra BSSID.
This problem is 100% reproducible. I guess it would be quite easy for the original hostapd developer to fix it.
-----Original Message-----
From: Ben Greear [mailto:greearb@candelatech.com]
Sent: Friday, January 07, 2011 12:50 PM
To: Chaoxing Lin
Cc: 'linux-wireless@vger.kernel.org'
Subject: Re: hostapd hangs on quit, multi-BSSID scenario
On 01/07/2011 09:44 AM, Chaoxing Lin wrote:
> Gentlemen,
>
> When I run hostapd with 8+1 BSSID over one radio (ath9160), it runs well. All 9 BSS accepts clients.
> But when I "Ctrl + C" or "killall hostapd", hostapd daemon can NOT gracefully shut down. It hangs forever. I have to "Ctrl + C" again. Then it quits and print message like "
>
> I am running latest (as of 01/06/2011) hostapd, latest stable kernel (2.6.37) with one number change in ath9k to allow more than 12 virtual BSS over one radio.
>
> Below is my hostapd-conf and console screenshot. If someone can fix this bug, please help.
Maybe attach gdb to hostapd and see where it hangs?
Also, what change did you make to ath9k?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: hostapd hangs on quit, multi-BSSID scenario
2011-01-07 17:58 ` Chaoxing Lin
@ 2011-01-07 18:07 ` Ben Greear
0 siblings, 0 replies; 6+ messages in thread
From: Ben Greear @ 2011-01-07 18:07 UTC (permalink / raw)
To: Chaoxing Lin; +Cc: 'linux-wireless@vger.kernel.org'
On 01/07/2011 09:58 AM, Chaoxing Lin wrote:
> 1. I don't know how to use GDB. Consider me entry level developer.
You need to learn how to use gdb..it will be well worth your time
if you plan to ever move beyond entry-level-developer.
Something as simple as:
gdb [hostapd-binary] [pid-of-hostapd-process]
Then inside of gdb:
bt
You might also try 'strace'.
> 2. It should not be related the change I made on ath9k. The reasons are
> a. My change is simple, linux/drivers/net/wireless/ath/ath9k/ath9k.h: change ATH_BCBUF from 4 to 12
> b. Without my change, driver accepts up to 3 extra BSSID. But hostapd still hangs on quit. Hostapd quits well if there only one extra BSSID.
>
> This problem is 100% reproducible. I guess it would be quite easy for the original hostapd developer to fix it.
Heh, maybe so..but if you want it fixed fast, you might need to put in some
extra debugging effort.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: hostapd hangs on quit, multi-BSSID scenario
2011-01-07 17:44 hostapd hangs on quit, multi-BSSID scenario Chaoxing Lin
2011-01-07 17:49 ` Ben Greear
@ 2011-01-09 17:26 ` Jouni Malinen
2011-01-10 14:51 ` Chaoxing Lin
1 sibling, 1 reply; 6+ messages in thread
From: Jouni Malinen @ 2011-01-09 17:26 UTC (permalink / raw)
To: Chaoxing Lin; +Cc: 'linux-wireless@vger.kernel.org'
On Fri, Jan 07, 2011 at 05:44:30PM +0000, Chaoxing Lin wrote:
> When I run hostapd with 8+1 BSSID over one radio (ath9160), it runs well. All 9 BSS accepts clients.
> But when I "Ctrl + C" or "killall hostapd", hostapd daemon can NOT gracefully shut down. It hangs forever. I have to "Ctrl + C" again. Then it quits and print message like "
> ^Celoop: could not process SIGINT or SIGTERM in two seconds. Looks like there
> is a bug that ends up in a busy loop that prevents clean shutdown.
> Killing program forcefully.
Fixed here:
http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=commitdiff;h=8546ea19301f31e5faf58a0f154773c3123e6474
--
Jouni Malinen PGP id EFC895FA
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: hostapd hangs on quit, multi-BSSID scenario
2011-01-09 17:26 ` Jouni Malinen
@ 2011-01-10 14:51 ` Chaoxing Lin
0 siblings, 0 replies; 6+ messages in thread
From: Chaoxing Lin @ 2011-01-10 14:51 UTC (permalink / raw)
To: 'Jouni Malinen'; +Cc: 'linux-wireless@vger.kernel.org'
Thanks very much.
It works very well now.
-----Original Message-----
From: Jouni Malinen [mailto:j@w1.fi]
Sent: Sunday, January 09, 2011 12:26 PM
To: Chaoxing Lin
Cc: 'linux-wireless@vger.kernel.org'
Subject: Re: hostapd hangs on quit, multi-BSSID scenario
On Fri, Jan 07, 2011 at 05:44:30PM +0000, Chaoxing Lin wrote:
> When I run hostapd with 8+1 BSSID over one radio (ath9160), it runs well. All 9 BSS accepts clients.
> But when I "Ctrl + C" or "killall hostapd", hostapd daemon can NOT gracefully shut down. It hangs forever. I have to "Ctrl + C" again. Then it quits and print message like "
> ^Celoop: could not process SIGINT or SIGTERM in two seconds. Looks like there
> is a bug that ends up in a busy loop that prevents clean shutdown.
> Killing program forcefully.
Fixed here:
http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=commitdiff;h=8546ea19301f31e5faf58a0f154773c3123e6474
--
Jouni Malinen PGP id EFC895FA
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-01-10 14:50 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-07 17:44 hostapd hangs on quit, multi-BSSID scenario Chaoxing Lin
2011-01-07 17:49 ` Ben Greear
2011-01-07 17:58 ` Chaoxing Lin
2011-01-07 18:07 ` Ben Greear
2011-01-09 17:26 ` Jouni Malinen
2011-01-10 14:51 ` Chaoxing Lin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).