From: Hauke Mehrtens <hauke@hauke-m.de>
To: George Kashperko <george@znau.edu.ua>
Cc: linux-wireless@vger.kernel.org
Subject: Re: SSB AI support code
Date: Sat, 12 Feb 2011 14:03:25 +0100 [thread overview]
Message-ID: <4D56851D.7000509@hauke-m.de> (raw)
In-Reply-To: <1297258590.17400.37.camel@dev.znau.edu.ua>
Hi,
After rethinking this I came to the same result as Michael that it would
bet better to have a extra module for the AI bus separated from the ssb.
I grepped for ssb_ in the b43 driver code and it should be doable to
change the api of ssb so that adding an other bus can be done without
any changes to ssb. After the SSB API was changed once.
Most of the ssb_* methods calls in the b43 driver are getting an
ssb_device struct so just a common struct for ssb and the ai bus is
needed and it must contain some function pointers to the needed functions.
Then the drivers integrated in the drivers/ssb must be extracted and
unbundled from the ssb code. One common header file with some common
structs for ssb and AI is needed and the rest can be separated.
If you need help with something, I would like to help you with these
things. I just ordered an Netgear WNR3500L. ;-)
Hauke
next prev parent reply other threads:[~2011-02-12 13:03 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-09 13:36 SSB AI support code George Kashperko
2011-02-09 14:29 ` SSB AI support code ([RFC1/11] SSB admatch redefine) George Kashperko
2011-02-09 14:31 ` SSB AI support code ([RFC2/11] SSB reintroduce handlers as device ops) George Kashperko
2011-02-09 14:32 ` SSB AI support code ([RFC3/11] SSB irqflag device op) George Kashperko
2011-02-09 16:19 ` Larry Finger
2011-02-09 17:10 ` George Kashperko
2011-02-09 17:48 ` Larry Finger
2011-02-09 18:23 ` George Kashperko
2011-02-09 19:19 ` Larry Finger
2011-02-09 19:26 ` George Kashperko
2011-02-09 19:42 ` Larry Finger
2011-02-09 14:34 ` SSB AI support code ([RFC4/11] SSB core control and state device ops) George Kashperko
2011-02-09 20:35 ` Rafał Miłecki
2011-02-09 21:01 ` Rafał Miłecki
2011-02-09 21:21 ` George Kashperko
2011-02-09 21:03 ` George Kashperko
2011-02-09 21:14 ` Michael Büsch
2011-02-09 21:55 ` Rafał Miłecki
2011-02-09 21:58 ` George Kashperko
2011-02-09 22:00 ` George Kashperko
2011-02-09 22:02 ` Michael Büsch
2011-02-09 22:22 ` George Kashperko
2011-02-09 14:36 ` SSB AI support code ([RFC5/11] SSB propagate core control and state ops usage) George Kashperko
2011-02-09 20:58 ` Rafał Miłecki
2011-02-09 21:12 ` Michael Büsch
2011-02-09 21:26 ` George Kashperko
2011-02-09 21:50 ` Rafał Miłecki
2011-02-09 21:55 ` George Kashperko
2011-02-09 14:37 ` SSB AI support code ([RFC6/11] SSB introduce bus_check_core routine) George Kashperko
2011-02-09 14:39 ` SSB AI support code ([RFC7/11] SSB introduce ssb_bus_detect routine) George Kashperko
2011-02-09 14:40 ` SSB AI support code ([RFC8/11] SSB separate SB-specific scanning) George Kashperko
2011-02-09 14:41 ` SSB AI support code ([RFC9/11] SSB modify irqflag treatment) George Kashperko
2011-02-09 16:23 ` Larry Finger
2011-02-09 16:53 ` George Kashperko
2011-02-09 14:44 ` SSB AI support code ([RFC9/11] SSB separate SB-specific code) George Kashperko
2011-02-09 14:45 ` SSB AI support code ([RFC10/11] SSB modify irqflag treatment) George Kashperko
2011-02-09 14:46 ` SSB AI support code ([RFC11/11] SSB add AI-bus support) George Kashperko
2011-02-09 16:25 ` Larry Finger
2011-02-09 18:33 ` George Kashperko
2011-02-09 16:49 ` Larry Finger
2011-02-09 21:35 ` SSB AI support code Rafał Miłecki
2011-02-09 21:41 ` George Kashperko
2011-02-09 21:51 ` Michael Büsch
2011-02-09 22:53 ` Rafał Miłecki
2011-02-09 23:10 ` Michael Büsch
2011-02-09 23:18 ` Larry Finger
2011-02-10 5:24 ` SSB AI support code ([RFC] v2) George Kashperko
2011-02-10 10:20 ` Michael Büsch
2011-02-10 17:40 ` George Kashperko
2011-02-10 18:11 ` Michael Büsch
[not found] ` <1297362251.15805.51.camel@dev.znau.edu.ua>
[not found] ` <1297363781.30218.37.camel@maggie>
2011-02-10 19:52 ` George Kashperko
2011-02-10 20:07 ` Michael Büsch
2011-02-15 14:50 ` Rafał Miłecki
2011-02-15 15:05 ` George Kashperko
2011-02-09 23:30 ` SSB AI support code George Kashperko
2011-02-15 14:48 ` Rafał Miłecki
2011-02-15 14:53 ` George Kashperko
2011-02-12 13:03 ` Hauke Mehrtens [this message]
2011-02-12 14:15 ` George Kashperko
2011-02-17 9:28 ` Roland Vossen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D56851D.7000509@hauke-m.de \
--to=hauke@hauke-m.de \
--cc=george@znau.edu.ua \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).