[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37.6-0.5-default (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-04-25 21:48:33 +0200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d2000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002dff0000 (usable) [ 0.000000] BIOS-e820: 000000002dff0000 - 000000002dff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000002dff8000 - 000000002e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: K7VM2./K7VM2., BIOS P1.90 08/28/2003 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x2dff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 base 02E000000 mask FFE000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 base 0E0000000 mask FF8000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002dff0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002dc00000 page 2M [ 0.000000] 002dc00000 - 002dff0000 page 4k [ 0.000000] kernel direct mapping tables up to 2dff0000 @ ffb000-1000000 [ 0.000000] RAMDISK: 2d502000 - 2dfe0000 [ 0.000000] ACPI: RSDP 000fa6f0 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 2dff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097) [ 0.000000] ACPI: FACP 2dff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097) [ 0.000000] ACPI: DSDT 2dff0120 0314B (v01 VIA KM266 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 2dff8000 00040 [ 0.000000] ACPI: APIC 2dff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 735MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2dff0000 [ 0.000000] low ram: 0 - 2dff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002dff0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002dff0 [ 0.000000] On node 0 totalpages: 188287 [ 0.000000] free_area_init_node: node 0, pgdat c0902c00, node_mem_map ecf42200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1440 pages used for memmap [ 0.000000] Normal zone: 182864 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 2e000000 (gap: 2e000000:d0c00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @ec800000 s27264 r0 d21888 u4194304 [ 0.000000] pcpu-alloc: s27264 r0 d21888 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186815 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD400BB-00CAA1_WD-WMA8E8858272-part5 resume=/dev/disk/by-id/ata-WDC_WD400BB-00CAA1_WD-WMA8E8858272-part1 splash=silent quiet showopts vga=0x314 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3767680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 722868k/753600k available (4109k kernel code, 30280k reserved, 3127k data, 428k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd33000 - 0xfffff000 (2864 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xee7f0000 - 0xff7fe000 ( 272 MB) [ 0.000000] lowmem : 0xc0000000 - 0xedff0000 ( 735 MB) [ 0.000000] .init : 0xc0912000 - 0xc097d000 ( 428 kB) [ 0.000000] .data : 0xc0603783 - 0xc0911708 (3127 kB) [ 0.000000] .text : 0xc0200000 - 0xc0603783 (4109 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=ec408000 soft=ec40a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.480 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.96 BogoMIPS (lpj=6649920) [ 0.004017] pid_max: default: 32768 minimum: 301 [ 0.004091] Security Framework initialized [ 0.004140] AppArmor: AppArmor initialized [ 0.004230] Mount-cache hash table entries: 512 [ 0.004465] Initializing cgroup subsys ns [ 0.004471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004476] Initializing cgroup subsys cpuacct [ 0.004482] Initializing cgroup subsys memory [ 0.004494] Initializing cgroup subsys devices [ 0.004498] Initializing cgroup subsys freezer [ 0.004502] Initializing cgroup subsys net_cls [ 0.004506] Initializing cgroup subsys blkio [ 0.004560] mce: CPU supports 4 MCE banks [ 0.004593] Performance Events: AMD PMU driver. [ 0.004605] ... version: 0 [ 0.004607] ... bit width: 48 [ 0.004609] ... generic registers: 4 [ 0.004612] ... value mask: 0000ffffffffffff [ 0.004615] ... max period: 00007fffffffffff [ 0.004617] ... fixed-purpose events: 0 [ 0.004620] ... event mask: 000000000000000f [ 0.005118] SMP alternatives: switching to UP code [ 0.012105] Freeing SMP alternatives: 28k freed [ 0.012152] ACPI: Core revision 20101013 [ 0.019824] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020929] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060626] CPU0: AMD Athlon(tm) XP 2000+ stepping 01 [ 0.064000] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064000] Brought up 1 CPUs [ 0.064000] Total of 1 processors activated (3324.96 BogoMIPS). [ 0.064000] devtmpfs: initialized [ 0.064000] regulator: core version 0.5 [ 0.064000] regulator: dummy: [ 0.064000] Time: 13:01:42 Date: 04/30/11 [ 0.064000] NET: Registered protocol family 16 [ 0.064000] ACPI: bus type pci registered [ 0.066766] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1 [ 0.066769] PCI: Using configuration type 1 for base access [ 0.068087] bio: create slab at 0 [ 0.069256] ACPI: EC: Look up EC in DSDT [ 0.075101] ACPI: Interpreter enabled [ 0.075108] ACPI: (supports S0 S1 S3 S4 S5) [ 0.075148] ACPI: Using IOAPIC for interrupt routing [ 0.076072] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.076102] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.076234] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.076353] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.076499] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.076640] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.080247] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.080531] ACPI: Power Resource [URP1] (off) [ 0.080562] ACPI: Power Resource [URP2] (off) [ 0.080593] ACPI: Power Resource [FDDP] (off) [ 0.080626] ACPI: Power Resource [LPTP] (off) [ 0.080802] ACPI: No dock devices found. [ 0.080811] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.081008] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.081315] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.081320] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.081324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.081328] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.081333] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xffdfffff] (ignored) [ 0.081337] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored) [ 0.081370] pci 0000:00:00.0: [1106:3116] type 0 class 0x000600 [ 0.081385] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref] [ 0.081460] pci 0000:00:01.0: [1106:b091] type 1 class 0x000604 [ 0.081500] pci 0000:00:01.0: supports D1 [ 0.081534] pci 0000:00:0a.0: [1244:0e00] type 0 class 0x000280 [ 0.081551] pci 0000:00:0a.0: reg 10: [mem 0xdfffffe0-0xdfffffff] [ 0.081561] pci 0000:00:0a.0: reg 14: [io 0xec00-0xec1f] [ 0.081613] pci 0000:00:0a.0: supports D2 [ 0.081617] pci 0000:00:0a.0: PME# supported from D2 D3hot D3cold [ 0.081622] pci 0000:00:0a.0: PME# disabled [ 0.081651] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 [ 0.081693] pci 0000:00:10.0: reg 20: [io 0xe000-0xe01f] [ 0.081723] pci 0000:00:10.0: supports D1 D2 [ 0.081726] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081731] pci 0000:00:10.0: PME# disabled [ 0.081755] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 [ 0.081797] pci 0000:00:10.1: reg 20: [io 0xe400-0xe41f] [ 0.081827] pci 0000:00:10.1: supports D1 D2 [ 0.081830] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081835] pci 0000:00:10.1: PME# disabled [ 0.081857] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03 [ 0.081899] pci 0000:00:10.2: reg 20: [io 0xe800-0xe81f] [ 0.081929] pci 0000:00:10.2: supports D1 D2 [ 0.081933] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081938] pci 0000:00:10.2: PME# disabled [ 0.081962] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03 [ 0.081979] pci 0000:00:10.3: reg 10: [mem 0xdffffe00-0xdffffeff] [ 0.082035] pci 0000:00:10.3: supports D1 D2 [ 0.082038] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082043] pci 0000:00:10.3: PME# disabled [ 0.082070] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601 [ 0.082131] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.082142] pci 0000:00:11.0: quirk: [io 0x0800-0x087f] claimed by vt8235 PM [ 0.082147] pci 0000:00:11.0: quirk: [io 0x0400-0x040f] claimed by vt8235 SMB [ 0.082186] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101 [ 0.082230] pci 0000:00:11.1: reg 20: [io 0xfc00-0xfc0f] [ 0.082287] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401 [ 0.082304] pci 0000:00:11.5: reg 10: [io 0xdc00-0xdcff] [ 0.082364] pci 0000:00:11.5: supports D1 D2 [ 0.082398] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200 [ 0.082414] pci 0000:00:12.0: reg 10: [io 0xd800-0xd8ff] [ 0.082425] pci 0000:00:12.0: reg 14: [mem 0xdffffd00-0xdffffdff] [ 0.082476] pci 0000:00:12.0: supports D1 D2 [ 0.082479] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082484] pci 0000:00:12.0: PME# disabled [ 0.082546] pci 0000:01:00.0: [5333:8d04] type 0 class 0x000300 [ 0.082562] pci 0000:01:00.0: reg 10: [mem 0xdfe80000-0xdfefffff] [ 0.082571] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref] [ 0.082602] pci 0000:01:00.0: reg 30: [mem 0xdfe70000-0xdfe7ffff pref] [ 0.082621] pci 0000:01:00.0: supports D1 D2 [ 0.082654] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.082661] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.082666] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfefffff] [ 0.082672] pci 0000:00:01.0: bridge window [mem 0xcfc00000-0xdfbfffff pref] [ 0.082682] pci_bus 0000:00: on NUMA node 0 [ 0.082688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.095100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.095222] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.095340] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.095458] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.095503] HEST: Table is not found! [ 0.095908] SCSI subsystem initialized [ 0.096086] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.096090] vgaarb: loaded [ 0.096364] PCI: Using ACPI for IRQ routing [ 0.096372] PCI: pci_cache_line_size set to 32 bytes [ 0.096437] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.096442] reserve RAM buffer: 000000002dff0000 - 000000002fffffff [ 0.096653] NetLabel: Initializing [ 0.096656] NetLabel: domain hash size = 128 [ 0.096658] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.096682] NetLabel: unlabeled traffic allowed by default [ 0.096700] Switching to clocksource tsc [ 0.099426] AppArmor: AppArmor Filesystem Enabled [ 0.099478] pnp: PnP ACPI init [ 0.099552] ACPI: bus type pnp registered [ 0.099946] pnp 00:00: [bus 00-ff] [ 0.099952] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.099957] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.099961] pnp 00:00: [io 0x0d00-0xffff window] [ 0.099965] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.099969] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.099973] pnp 00:00: [mem 0x30000000-0xffdfffff window] [ 0.099977] pnp 00:00: [mem 0xfee01000-0xffdfffff window] [ 0.099977] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.099977] pnp 00:01: [io 0x03f2-0x03f3] [ 0.099977] pnp 00:01: [io 0x03f4-0x03f5] [ 0.099977] pnp 00:01: [io 0x03f7] [ 0.099977] pnp 00:01: [irq 6] [ 0.099977] pnp 00:01: [dma 2] [ 0.099977] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.100463] pnp 00:02: [io 0x0010-0x001f] [ 0.100468] pnp 00:02: [io 0x0022-0x003f] [ 0.100471] pnp 00:02: [io 0x0044-0x005f] [ 0.100475] pnp 00:02: [io 0x0062-0x0063] [ 0.100478] pnp 00:02: [io 0x0065-0x006f] [ 0.100481] pnp 00:02: [io 0x0072-0x007f] [ 0.100484] pnp 00:02: [io 0x0080] [ 0.100487] pnp 00:02: [io 0x0084-0x0086] [ 0.100490] pnp 00:02: [io 0x0088] [ 0.100493] pnp 00:02: [io 0x008c-0x008e] [ 0.100496] pnp 00:02: [io 0x0090-0x009f] [ 0.100499] pnp 00:02: [io 0x00a2-0x00bf] [ 0.100503] pnp 00:02: [io 0x00e0-0x00ef] [ 0.100506] pnp 00:02: [io 0x0295-0x0296] [ 0.100509] pnp 00:02: [io 0x03f0-0x03f1] [ 0.100513] pnp 00:02: [io 0x04d0-0x04d1] [ 0.100516] pnp 00:02: [io 0x0400-0x040f] [ 0.100519] pnp 00:02: [io 0x0800-0x087f] [ 0.100523] pnp 00:02: [mem 0xfec00000-0xfec00fff] [ 0.100526] pnp 00:02: [mem 0xfee00000-0xfee00fff] [ 0.100631] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.100668] pnp 00:03: [dma 4] [ 0.100672] pnp 00:03: [io 0x0000-0x000f] [ 0.100676] pnp 00:03: [io 0x0081-0x0083] [ 0.100683] pnp 00:03: [io 0x0087] [ 0.100687] pnp 00:03: [io 0x0089-0x008b] [ 0.100691] pnp 00:03: [io 0x008f] [ 0.100694] pnp 00:03: [io 0x00c0-0x00df] [ 0.100742] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.100764] pnp 00:04: [io 0x0070-0x0071] [ 0.100773] pnp 00:04: [irq 8] [ 0.100825] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.100843] pnp 00:05: [io 0x0061] [ 0.100891] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.100910] pnp 00:06: [io 0x00f0-0x00ff] [ 0.100917] pnp 00:06: [irq 13] [ 0.100965] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.101040] pnp 00:07: [io 0x0060] [ 0.101044] pnp 00:07: [io 0x0064] [ 0.101052] pnp 00:07: [irq 1] [ 0.101107] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.101405] pnp: PnP ACPI: found 8 devices [ 0.101408] ACPI: ACPI bus type pnp unregistered [ 0.101416] PnPBIOS: Disabled by ACPI PNP [ 0.101444] system 00:02: [io 0x0295-0x0296] has been reserved [ 0.101449] system 00:02: [io 0x03f0-0x03f1] has been reserved [ 0.101453] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.101457] system 00:02: [io 0x0400-0x040f] has been reserved [ 0.101461] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.101468] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.101473] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.139796] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.139802] pci 0000:00:01.0: bridge window [io disabled] [ 0.139811] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfefffff] [ 0.139818] pci 0000:00:01.0: bridge window [mem 0xcfc00000-0xdfbfffff pref] [ 0.139841] pci 0000:00:01.0: setting latency timer to 64 [ 0.139848] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.139852] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.139857] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfefffff] [ 0.139861] pci_bus 0000:01: resource 2 [mem 0xcfc00000-0xdfbfffff pref] [ 0.140012] NET: Registered protocol family 2 [ 0.140155] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.140981] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.144861] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.146664] TCP: Hash tables configured (established 131072 bind 65536) [ 0.146670] TCP reno registered [ 0.146682] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.146746] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.147119] NET: Registered protocol family 1 [ 0.147161] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.147352] pci 0000:01:00.0: Boot video device [ 0.147357] PCI: CLS 32 bytes, default 32 [ 0.147511] Unpacking initramfs... [ 0.580367] Freeing initrd memory: 11128k freed [ 0.621099] audit: initializing netlink socket (disabled) [ 0.621141] type=2000 audit(1304168502.616:1): initialized [ 0.641521] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.641775] VFS: Disk quotas dquot_6.5.2 [ 0.641824] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.642014] msgmni has been set to 358 [ 0.642391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.642434] io scheduler noop registered [ 0.642437] io scheduler deadline registered [ 0.642452] io scheduler cfq registered (default) [ 0.643189] vesafb: framebuffer at 0xd0000000, mapped to 0xee880000, using 1875k, total 31680k [ 0.643194] vesafb: mode is 800x600x16, linelength=1600, pages=32 [ 0.643197] vesafb: protected mode interface info at c000:7f61 [ 0.643201] vesafb: pmi: set display start = c00c7fef, set palette = c00c8038 [ 0.643204] vesafb: scrolling: redraw [ 0.643209] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.644862] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.644873] bootsplash: silentjpeg size 124451 bytes [ 0.665155] bootsplash: ...found (800x600, 111015 bytes, v3). [ 0.718728] Console: switching to colour frame buffer device 96x33 [ 0.771009] fb0: VESA VGA frame buffer device [ 0.771163] ERST: Table is not found! [ 0.771222] isapnp: Scanning for PnP cards... [ 1.081235] isapnp: No Plug & Play device found [ 1.081825] Non-volatile memory driver v1.3 [ 1.081829] Linux agpgart interface v0.103 [ 1.082046] agpgart: Detected VIA PM266/KM266 chipset [ 1.093279] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 1.093335] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 1.095473] Fixed MDIO Bus: probed [ 1.095548] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.095552] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.095781] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.095960] mice: PS/2 mouse device common for all mice [ 1.096388] cpuidle: using governor ladder [ 1.096393] cpuidle: using governor menu [ 1.096793] TCP cubic registered [ 1.096838] NET: Registered protocol family 10 [ 1.097436] lo: Disabled Privacy Extensions [ 1.097807] Registering the dns_resolver key type [ 1.097934] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5) [ 1.097956] Using IPI No-Shortcut mode [ 1.098204] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD400BB-00CAA1_WD-WMA8E8858272-part1 [ 1.114192] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.114286] PM: Hibernation image not present or could not be loaded. [ 1.114314] registered taskstats version 1 [ 1.114582] Magic number: 7:581:29 [ 1.114936] Freeing unused kernel memory: 428k freed [ 1.116098] Write protecting the kernel text: 4112k [ 1.116174] Write protecting the kernel read-only data: 2868k [ 1.243374] libata version 3.00 loaded. [ 1.247376] pata_via 0000:00:11.1: version 0.3.4 [ 1.247413] pata_via 0000:00:11.1: can't derive routing for PCI INT A [ 1.248312] scsi0 : pata_via [ 1.248521] scsi1 : pata_via [ 1.251719] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.251724] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.413475] ata1.00: ATA-5: WDC WD400BB-00CAA1, 17.07W17, max UDMA/100 [ 1.413481] ata1.00: 78165360 sectors, multi 16: LBA [ 1.429280] ata1.00: configured for UDMA/100 [ 1.429577] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00CA 17.0 PQ: 0 ANSI: 5 [ 1.430199] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.430287] sd 0:0:0:0: [sda] Write Protect is off [ 1.430293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.430331] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.484586] sda: sda1 sda2 sda3 < sda5 sda6 > [ 1.485226] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.872824] ata2.00: ATAPI: IDE DVD-ROM 16X, V3.10, max UDMA/33 [ 1.872833] ata2.01: ATAPI: LITE-ON LTR-32123S, XS0X, max UDMA/33 [ 1.880349] ata2.00: configured for UDMA/33 [ 1.896213] ata2.01: configured for UDMA/33 [ 1.904397] scsi 1:0:0:0: CD-ROM IDE DVD-ROM 16X 3.10 PQ: 0 ANSI: 5 [ 1.910337] scsi 1:0:1:0: CD-ROM LITE-ON LTR-32123S XS0X PQ: 0 ANSI: 5 [ 1.938050] ACPI: acpi_idle registered with cpuidle [ 1.964465] udev[75]: starting version 166 [ 2.039783] usbcore: registered new interface driver usbfs [ 2.039852] usbcore: registered new interface driver hub [ 2.285990] rtc_cmos 00:04: RTC can wake from S4 [ 2.286217] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.286286] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 2.327298] usbcore: registered new device driver usb [ 2.340271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.340393] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 2.340444] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 2.340513] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 2.340638] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffffe00 [ 2.352096] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 2.352203] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.352208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.352213] usb usb1: Product: EHCI Host Controller [ 2.352217] usb usb1: Manufacturer: Linux 2.6.37.6-0.5-default ehci_hcd [ 2.352220] usb usb1: SerialNumber: 0000:00:10.3 [ 2.352555] hub 1-0:1.0: USB hub found [ 2.352568] hub 1-0:1.0: 6 ports detected [ 2.362337] uhci_hcd: USB Universal Host Controller Interface driver [ 2.362493] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.362525] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.362566] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.362616] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000 [ 2.362708] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.362712] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.362717] usb usb2: Product: UHCI Host Controller [ 2.362720] usb usb2: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd [ 2.362723] usb usb2: SerialNumber: 0000:00:10.0 [ 2.363022] hub 2-0:1.0: USB hub found [ 2.363038] hub 2-0:1.0: 2 ports detected [ 2.363163] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.363173] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.363194] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 2.363220] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400 [ 2.363277] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.363281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.363285] usb usb3: Product: UHCI Host Controller [ 2.363288] usb usb3: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd [ 2.363292] usb usb3: SerialNumber: 0000:00:10.1 [ 2.363448] hub 3-0:1.0: USB hub found [ 2.363455] hub 3-0:1.0: 2 ports detected [ 2.363551] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 2.363562] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 2.363574] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 2.363599] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800 [ 2.363655] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.363659] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.363663] usb usb4: Product: UHCI Host Controller [ 2.363666] usb usb4: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd [ 2.363669] usb usb4: SerialNumber: 0000:00:10.2 [ 2.363825] hub 4-0:1.0: USB hub found [ 2.363832] hub 4-0:1.0: 2 ports detected [ 2.720091] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 2.942215] usb 1-2: New USB device found, idVendor=0cf3, idProduct=1002 [ 2.942225] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 2.942231] usb 1-2: Product: USB2.0 WLAN [ 2.942234] usb 1-2: Manufacturer: ATHER [ 2.942237] usb 1-2: SerialNumber: 12345 [ 3.021744] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 3.021754] PM: Basic memory bitmaps created [ 3.029078] PM: Basic memory bitmaps freed [ 3.056068] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 3.103222] PM: Starting manual resume from disk [ 3.103232] PM: Hibernation image partition 8:1 present [ 3.103234] PM: Looking for hibernation image. [ 3.103678] PM: Image not found (code -22) [ 3.103681] PM: Hibernation image not present or could not be loaded. [ 3.207676] usb 1-3: New USB device found, idVendor=0ac8, idProduct=3450 [ 3.207685] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.207691] usb 1-3: Product: Vimicro USB Camera (Altair) [ 3.207694] usb 1-3: Manufacturer: Vimicro [ 3.410309] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 3.536924] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr [ 3.575544] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 3.752718] usb 2-1: New USB device found, idVendor=046d, idProduct=c00e [ 3.752728] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.752733] usb 2-1: Product: USB-PS/2 Optical Mouse [ 3.752736] usb 2-1: Manufacturer: Logitech [ 3.992059] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 4.190322] usb 3-2: New USB device found, idVendor=03f0, idProduct=3a11 [ 4.190330] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.190336] usb 3-2: Product: officejet 5500 series [ 4.190339] usb 3-2: Manufacturer: hp [ 4.190341] usb 3-2: SerialNumber: MY39NC20M896 [ 5.212212] preloadtrace: systemtap: 1.4/0.149, base: eee4c000, memory: 30data/39text/6ctx/13net/260alloc kb, probes: 34 [ 6.332405] udev[306]: starting version 166 [ 7.040255] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.303292] WARNING! power/level is deprecated; use power/control instead [ 7.318094] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 7.318277] ACPI: Power Button [PWRB] [ 7.318411] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 7.318475] ACPI: Sleep Button [SLPB] [ 7.318561] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 7.318620] ACPI: Power Button [PWRF] [ 7.341192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.416895] Floppy drive(s): fd0 is 1.44M [ 7.436231] FDC 0 is a post-1991 82077 [ 7.451340] NET: Registered protocol family 23 [ 7.548722] Modular ISDN core version 1.1.21 [ 7.549012] NET: Registered protocol family 34 [ 7.579886] mISDNipac module version 2.0 [ 7.590165] AVM Fritz PCI driver Rev. 2.1 [ 7.590280] fcpci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.590286] mISDN: found adapter Fritz!Card PCI v2 at 0000:00:0a.0 [ 7.590306] AVM.1: AVM Fritz!CARD PCIv2 config irq:18 base:0xEC00 [ 7.612023] AVM 1 cards installed DEBUG [ 7.700671] cfg80211: Calling CRDA to update world regulatory domain [ 7.748665] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 7.748791] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.753579] eth0: VIA Rhine II at 0xdffffd00, 00:0b:6a:26:5f:78, IRQ 23. [ 7.754295] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 7.798025] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 8.036361] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.036454] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 8.036527] scsi 1:0:1:0: Attached scsi generic sg2 type 5 [ 8.199839] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input5 [ 8.200224] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1/input0 [ 8.200290] usbcore: registered new interface driver usbhid [ 8.200293] usbhid: USB HID core driver [ 8.289875] Linux video capture interface: v2.00 [ 8.401709] sr0: scsi3-mmc drive: 16x/16x cd/rw xa/form2 cdda tray [ 8.401725] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.402058] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 8.455097] sr1: scsi3-mmc drive: 212x/40x writer cd/rw xa/form2 cdda tray [ 8.455433] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 8.594504] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450) [ 8.606810] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0/input/input6 [ 8.606968] usbcore: registered new interface driver uvcvideo [ 8.607112] USB Video Class driver (v1.0.0) [ 8.643052] cfg80211: World regulatory domain updated: [ 8.643065] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.643070] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.643074] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.643078] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.643082] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.643086] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.713544] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 8.983866] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 8.984064] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 9.442102] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3A11 [ 9.442166] usbcore: registered new interface driver usblp [ 9.916283] usbcore: registered new interface driver ar9170usb [ 10.177059] usb 1-2: ar9170.fw firmware file not found, trying old firmware... [ 10.526000] Adding 449784k swap on /dev/sda1. Priority:-1 extents:1 across:449784k [ 11.130602] ath: EEPROM regdomain: 0x809c [ 11.130610] ath: EEPROM indicates we should expect a country code [ 11.130614] ath: doing EEPROM country->regdmn map search [ 11.130618] ath: country maps to regdmn code: 0x52 [ 11.130623] ath: Country alpha2 being used: CN [ 11.130626] ath: Regpair used: 0x52 [ 11.258624] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.260459] cfg80211: Calling CRDA for country: CN [ 11.264370] Registered led device: ar9170-phy0::tx [ 11.264429] Registered led device: ar9170-phy0::assoc [ 11.264437] usb 1-2: Atheros AR9170 is registered as 'phy0' [ 11.291923] cfg80211: Regulatory domain changed to country: CN [ 11.291933] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.291938] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 11.291942] (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 11.719225] device-mapper: uevent: version 1.0.3 [ 11.731016] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 12.347921] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl [ 12.472178] REISERFS (device sda2): found reiserfs format "3.6" with standard journal [ 12.472279] REISERFS (device sda2): using ordered data mode [ 12.472282] reiserfs: using flush barriers [ 12.475004] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 12.479564] REISERFS (device sda2): checking transaction log (sda2) [ 12.545594] REISERFS (device sda2): Using r5 hash to sort names [ 14.868905] type=1400 audit(1304168516.868:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=764 comm="apparmor_parser" [ 15.002669] type=1400 audit(1304168517.000:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=803 comm="apparmor_parser" [ 15.413970] type=1400 audit(1304168517.412:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=807 comm="apparmor_parser" [ 15.758482] type=1400 audit(1304168517.756:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=811 comm="apparmor_parser" [ 17.053604] type=1400 audit(1304168519.052:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=816 comm="apparmor_parser" [ 17.054145] type=1400 audit(1304168519.052:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=816 comm="apparmor_parser" [ 17.054371] type=1400 audit(1304168519.052:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=816 comm="apparmor_parser" [ 17.054776] type=1400 audit(1304168519.052:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=816 comm="apparmor_parser" [ 17.361797] type=1400 audit(1304168519.360:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=820 comm="apparmor_parser" [ 17.723610] type=1400 audit(1304168519.720:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=824 comm="apparmor_parser" [ 20.262022] audit_printk_skb: 21 callbacks suppressed [ 20.262032] type=1400 audit(1304168522.260:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dovecot" pid=856 comm="apparmor_parser" [ 20.719161] type=1400 audit(1304168522.716:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/identd" pid=860 comm="apparmor_parser" [ 21.247346] type=1400 audit(1304168523.244:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mdnsd" pid=864 comm="apparmor_parser" [ 22.088399] type=1400 audit(1304168524.088:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nmbd" pid=868 comm="apparmor_parser" [ 22.544367] type=1400 audit(1304168524.544:23): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nscd" pid=872 comm="apparmor_parser" [ 23.421976] type=1400 audit(1304168525.420:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=876 comm="apparmor_parser" [ 24.501722] type=1400 audit(1304168526.500:25): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbd" pid=880 comm="apparmor_parser" [ 24.966283] type=1400 audit(1304168526.964:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/traceroute" pid=884 comm="apparmor_parser" [ 32.136560] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 33.103306] nf_conntrack version 0.5.0 (11475 buckets, 45900 max) [ 34.142794] ip_tables: (C) 2000-2006 Netfilter Core Team [ 36.395165] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 40.701994] powernow-k8: Processor cpuid 681 not supported [ 41.761008] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 41.772083] eth0: link down [ 41.772682] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.162420] [drm] Initialized drm 1.1.0 20060810 [ 42.185748] NET: Registered protocol family 17 [ 42.742619] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 42.743009] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0 [ 42.748338] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 42.748383] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode [ 42.748450] pci 0000:01:00.0: putting AGP V2 device into 0x mode [ 46.489140] start_kdeinit (1553): /proc/1553/oom_adj is deprecated, please use /proc/1553/oom_score_adj instead. [ 50.604231] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0 [ 50.771740] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0 [ 53.838536] wlan0: authenticate with 00:24:01:28:34:bb (try 1) [ 53.840790] wlan0: authenticated [ 53.840924] wlan0: associate with 00:24:01:28:34:bb (try 1) [ 53.844850] wlan0: RX AssocResp from 00:24:01:28:34:bb (capab=0x431 status=0 aid=2) [ 53.844861] wlan0: associated [ 53.950756] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 66.024714] bootsplash: status on console 0 changed to on [ 96.342080] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 108.989609] fuse init (API version 7.15) [ 109.422601] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=1598 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 111.712964] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=1618 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 127.163474] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=1793 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 139.693716] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=1925 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 150.788254] wlan0: deauthenticated from 00:24:01:28:34:bb (Reason: 4) [ 150.902192] cfg80211: Calling CRDA to update world regulatory domain [ 151.067312] cfg80211: World regulatory domain updated: [ 151.067330] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 151.067336] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 151.067341] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 151.067345] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 151.067349] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 151.067352] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 153.397131] wlan0: authenticate with 00:24:01:28:34:bb (try 1) [ 153.596062] wlan0: authenticate with 00:24:01:28:34:bb (try 2) [ 153.796164] wlan0: authenticate with 00:24:01:28:34:bb (try 3) [ 153.996066] wlan0: authentication with 00:24:01:28:34:bb timed out [ 165.797685] wlan0: direct probe to 00:24:01:28:34:bb (try 1) [ 165.996080] wlan0: direct probe to 00:24:01:28:34:bb (try 2) [ 166.196066] wlan0: direct probe to 00:24:01:28:34:bb (try 3) [ 166.396208] wlan0: direct probe to 00:24:01:28:34:bb timed out [ 169.161471] wlan0: direct probe to 00:24:01:28:34:bb (try 1) [ 169.360072] wlan0: direct probe to 00:24:01:28:34:bb (try 2) [ 169.560040] wlan0: direct probe to 00:24:01:28:34:bb (try 3) [ 169.760036] wlan0: direct probe to 00:24:01:28:34:bb timed out [ 181.580185] wlan0: direct probe to 00:24:01:28:34:bb (try 1) [ 181.780063] wlan0: direct probe to 00:24:01:28:34:bb (try 2) [ 181.980176] wlan0: direct probe to 00:24:01:28:34:bb (try 3) [ 182.180041] wlan0: direct probe to 00:24:01:28:34:bb timed out [ 198.860150] wlan0: direct probe to 00:24:01:28:34:bb (try 1) [ 199.060193] wlan0: direct probe to 00:24:01:28:34:bb (try 2) [ 199.260147] wlan0: direct probe to 00:24:01:28:34:bb (try 3) [ 199.460050] wlan0: direct probe to 00:24:01:28:34:bb timed out [ 211.263257] wlan0: direct probe to 00:24:01:28:34:bb (try 1) [ 211.460078] wlan0: direct probe to 00:24:01:28:34:bb (try 2) [ 211.660077] wlan0: direct probe to 00:24:01:28:34:bb (try 3) [ 211.860041] wlan0: direct probe to 00:24:01:28:34:bb timed out [ 230.493024] wlan0: authenticate with 00:24:01:28:34:bb (try 1) [ 230.496972] wlan0: authenticated [ 230.497119] wlan0: associate with 00:24:01:28:34:bb (try 1) [ 230.500902] wlan0: RX AssocResp from 00:24:01:28:34:bb (capab=0x431 status=0 aid=2) [ 230.500920] wlan0: associated [ 234.765224] martian source 255.255.255.255 from 192.168.0.1, on dev wlan0 [ 234.765239] ll header: ff:ff:ff:ff:ff:ff:00:24:01:28:34:bb:08:00 [ 242.680367] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3111 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 261.487153] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3331 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 264.847381] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3361 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 267.447303] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3387 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 269.442531] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3419 PROTO=UDP SPT=61773 DPT=1025 LEN=34 [ 378.311650] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=192.168.0.1 DST=192.168.0.194 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=23363 PROTO=UDP SPT=53 DPT=48287 LEN=126 [ 378.526081] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=192.168.0.1 DST=192.168.0.194 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=23364 PROTO=UDP SPT=53 DPT=48287 LEN=126 [ 379.586986] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=192.168.0.1 DST=192.168.0.194 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=23371 PROTO=UDP SPT=53 DPT=51789 LEN=131 [ 379.737029] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=192.168.0.1 DST=192.168.0.194 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=23374 PROTO=UDP SPT=53 DPT=51789 LEN=131