From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.candelatech.com ([208.74.158.172]:51013 "EHLO ns3.lanforge.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758805Ab1ENAG5 (ORCPT ); Fri, 13 May 2011 20:06:57 -0400 Received: from [192.168.100.195] (firewall.candelatech.com [70.89.124.249]) (authenticated bits=0) by ns3.lanforge.com (8.14.2/8.14.2) with ESMTP id p4E06ui5019884 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Fri, 13 May 2011 17:06:57 -0700 Message-ID: <4DCDC7A0.2020504@candelatech.com> (sfid-20110514_020759_726744_B04DBCFC) Date: Fri, 13 May 2011 17:06:56 -0700 From: Ben Greear MIME-Version: 1.0 To: "linux-wireless@vger.kernel.org" Subject: Re: Can't get hostapd to start, channels are all passive-scanning? References: <4DCDC068.9060307@candelatech.com> In-Reply-To: <4DCDC068.9060307@candelatech.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 05/13/2011 04:36 PM, Ben Greear wrote: > Any idea what would cause all of my 5Ghz channels to be passive > scanning (which keeps hostapd from being able to use them, evidently) > > Frequencies: > * 5180 MHz [36] (17.0 dBm) (passive scanning, no IBSS) > * 5200 MHz [40] (17.0 dBm) (passive scanning, no IBSS) > * 5220 MHz [44] (17.0 dBm) (passive scanning, no IBSS) > * 5240 MHz [48] (17.0 dBm) (passive scanning, no IBSS) > * 5260 MHz [52] (18.0 dBm) (passive scanning, no IBSS, radar detection) > * 5280 MHz [56] (18.0 dBm) (passive scanning, no IBSS, radar detection) > * 5300 MHz [60] (18.0 dBm) (passive scanning, no IBSS, radar detection) > * 5320 MHz [64] (18.0 dBm) (passive scanning, no IBSS, radar detection) Bleh...reboot and it comes up looking more normal (first 4 are usable, at least). Will post again if I can reproduce it. Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com