From: Mike McCormack <mikem@ring3k.org>
To: linville@tuxdriver.com
Cc: Larry.Finger@lwfinger.net, chaoming_li@realsil.com.cn,
linux-wireless@vger.kernel.org
Subject: [PATCH 0/8] rtl8192ce stability improvements
Date: Wed, 25 May 2011 09:38:20 +0900 [thread overview]
Message-ID: <4DDC4F7C.6000802@ring3k.org> (raw)
Hi John,
The following patch series is aimed at improving the stability
of the rtl8192ce driver, with a bit of cleanup thrown in.
[Rebased onto 66b00115d, added Larry's Signed-Off]
thanks,
Mike
Mike McCormack (8):
rtlwifi: Synchronize IRQ after disabling it
rtlwifi: Remove set_rfpowerstate_inprogress
rtlwifi: Store loop index in local variable
rtlwifi: Run IPS leave work in a tasklet
rtlwifi: Don't block interrupts in spinlocks
rtlwifi: Assign rx buffer ownership to hardware last
rtlwifi: Use write barrier when assigning ownership
rtlwifi: Fix logic in rx_interrupt
drivers/net/wireless/rtlwifi/pci.c | 41 ++++++++++++++----------
drivers/net/wireless/rtlwifi/ps.c | 45 +++++++++++---------------
drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 1 +
drivers/net/wireless/rtlwifi/rtl8192ce/phy.c | 12 ++----
drivers/net/wireless/rtlwifi/rtl8192ce/trx.c | 2 +
drivers/net/wireless/rtlwifi/rtl8192cu/phy.c | 2 -
drivers/net/wireless/rtlwifi/rtl8192se/phy.c | 14 ++------
drivers/net/wireless/rtlwifi/wifi.h | 2 +-
8 files changed, 55 insertions(+), 64 deletions(-)
--
1.7.4.1
next reply other threads:[~2011-05-25 0:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-25 0:38 Mike McCormack [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-05-23 13:53 [PATCH 0/8] rtl8192ce stability improvements Mike McCormack
2011-05-23 16:49 ` Larry Finger
2011-05-24 13:35 ` Mike McCormack
2011-05-24 14:40 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DDC4F7C.6000802@ring3k.org \
--to=mikem@ring3k.org \
--cc=Larry.Finger@lwfinger.net \
--cc=chaoming_li@realsil.com.cn \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).