* ath: Unable to reset channel (2412 MHz), reset status -5 @ 2011-07-19 6:13 Justin P. Mattock 2011-07-19 6:25 ` Mohammed Shafi 0 siblings, 1 reply; 8+ messages in thread From: Justin P. Mattock @ 2011-07-19 6:13 UTC (permalink / raw) To: netdev@vger.kernel.org, linux-wireless, linux-kernel@vger.kernel.org seems with the latest Mainline I am getting the ath9k carpping out after a while of streaming(dmesg below)..: http://fpaste.org/D7wM/ will try a bisect if I have the time.. Justin P. Mattock ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath: Unable to reset channel (2412 MHz), reset status -5 2011-07-19 6:13 ath: Unable to reset channel (2412 MHz), reset status -5 Justin P. Mattock @ 2011-07-19 6:25 ` Mohammed Shafi 2011-07-19 6:35 ` Justin P. Mattock 0 siblings, 1 reply; 8+ messages in thread From: Mohammed Shafi @ 2011-07-19 6:25 UTC (permalink / raw) To: Justin P. Mattock Cc: netdev@vger.kernel.org, linux-wireless, linux-kernel@vger.kernel.org On Tue, Jul 19, 2011 at 11:43 AM, Justin P. Mattock <justinmattock@gmail.com> wrote: > seems with the latest Mainline I am getting the ath9k carpping out after a > while of streaming(dmesg below)..: > http://fpaste.org/D7wM/ > > will try a bisect if I have the time.. I will try to recreate here with 3.0.0-rc7-wl, we can get more information by ath9k debug=0xffffffff. thanks. -- shafi ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath: Unable to reset channel (2412 MHz), reset status -5 2011-07-19 6:25 ` Mohammed Shafi @ 2011-07-19 6:35 ` Justin P. Mattock 2011-07-19 6:46 ` Mohammed Shafi 0 siblings, 1 reply; 8+ messages in thread From: Justin P. Mattock @ 2011-07-19 6:35 UTC (permalink / raw) To: Mohammed Shafi Cc: netdev@vger.kernel.org, linux-wireless, linux-kernel@vger.kernel.org On 07/18/2011 11:25 PM, Mohammed Shafi wrote: > On Tue, Jul 19, 2011 at 11:43 AM, Justin P. Mattock > <justinmattock@gmail.com> wrote: >> seems with the latest Mainline I am getting the ath9k carpping out after a >> while of streaming(dmesg below)..: >> http://fpaste.org/D7wM/ >> >> will try a bisect if I have the time.. > > I will try to recreate here with 3.0.0-rc7-wl, we can get more > information by ath9k debug=0xffffffff. > thanks. > cool! seems to fire off randomly over here. Justin P. Mattock ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath: Unable to reset channel (2412 MHz), reset status -5 2011-07-19 6:35 ` Justin P. Mattock @ 2011-07-19 6:46 ` Mohammed Shafi 2011-07-19 15:25 ` Justin P. Mattock 0 siblings, 1 reply; 8+ messages in thread From: Mohammed Shafi @ 2011-07-19 6:46 UTC (permalink / raw) To: Justin P. Mattock Cc: netdev@vger.kernel.org, linux-wireless, linux-kernel@vger.kernel.org On Tue, Jul 19, 2011 at 12:05 PM, Justin P. Mattock <justinmattock@gmail.com> wrote: > On 07/18/2011 11:25 PM, Mohammed Shafi wrote: >> >> On Tue, Jul 19, 2011 at 11:43 AM, Justin P. Mattock >> <justinmattock@gmail.com> wrote: >>> >>> seems with the latest Mainline I am getting the ath9k carpping out after >>> a >>> while of streaming(dmesg below)..: >>> http://fpaste.org/D7wM/ >>> >>> will try a bisect if I have the time.. >> >> I will try to recreate here with 3.0.0-rc7-wl, we can get more >> information by ath9k debug=0xffffffff. >> thanks. >> > > cool! > seems to fire off randomly over here. I have got AR5416, will try with that. -- shafi ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath: Unable to reset channel (2412 MHz), reset status -5 2011-07-19 6:46 ` Mohammed Shafi @ 2011-07-19 15:25 ` Justin P. Mattock 2011-07-19 15:49 ` Mohammed Shafi 0 siblings, 1 reply; 8+ messages in thread From: Justin P. Mattock @ 2011-07-19 15:25 UTC (permalink / raw) To: Mohammed Shafi Cc: netdev@vger.kernel.org, linux-wireless, linux-kernel@vger.kernel.org On 07/18/2011 11:46 PM, Mohammed Shafi wrote: > On Tue, Jul 19, 2011 at 12:05 PM, Justin P. Mattock > <justinmattock@gmail.com> wrote: >> On 07/18/2011 11:25 PM, Mohammed Shafi wrote: >>> >>> On Tue, Jul 19, 2011 at 11:43 AM, Justin P. Mattock >>> <justinmattock@gmail.com> wrote: >>>> >>>> seems with the latest Mainline I am getting the ath9k carpping out after >>>> a >>>> while of streaming(dmesg below)..: >>>> http://fpaste.org/D7wM/ >>>> >>>> will try a bisect if I have the time.. >>> >>> I will try to recreate here with 3.0.0-rc7-wl, we can get more >>> information by ath9k debug=0xffffffff. >>> thanks. >>> >> >> cool! >> seems to fire off randomly over here. > > I have got AR5416, will try with that. > I can try the bisect, but might take a while, since external activities(job). Seems this is just starting i.g. with 3.0.0-rc1 I never saw this, but with 3.0.0-rc7-00125-gf560f66 its making noise. Justin P. Mattock ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath: Unable to reset channel (2412 MHz), reset status -5 2011-07-19 15:25 ` Justin P. Mattock @ 2011-07-19 15:49 ` Mohammed Shafi 2011-07-19 16:01 ` Justin P. Mattock 2011-07-22 5:07 ` Justin P. Mattock 0 siblings, 2 replies; 8+ messages in thread From: Mohammed Shafi @ 2011-07-19 15:49 UTC (permalink / raw) To: Justin P. Mattock Cc: netdev@vger.kernel.org, linux-wireless, linux-kernel@vger.kernel.org On Tue, Jul 19, 2011 at 8:55 PM, Justin P. Mattock <justinmattock@gmail.com> wrote: > On 07/18/2011 11:46 PM, Mohammed Shafi wrote: >> >> On Tue, Jul 19, 2011 at 12:05 PM, Justin P. Mattock >> <justinmattock@gmail.com> wrote: >>> >>> On 07/18/2011 11:25 PM, Mohammed Shafi wrote: >>>> >>>> On Tue, Jul 19, 2011 at 11:43 AM, Justin P. Mattock >>>> <justinmattock@gmail.com> wrote: >>>>> >>>>> seems with the latest Mainline I am getting the ath9k carpping out >>>>> after >>>>> a >>>>> while of streaming(dmesg below)..: >>>>> http://fpaste.org/D7wM/ >>>>> >>>>> will try a bisect if I have the time.. >>>> >>>> I will try to recreate here with 3.0.0-rc7-wl, we can get more >>>> information by ath9k debug=0xffffffff. >>>> thanks. >>>> >>> >>> cool! >>> seems to fire off randomly over here. >> >> I have got AR5416, will try with that. >> > > I can try the bisect, but might take a while, since external > activities(job). Seems this is just starting i.g. with > 3.0.0-rc1 I never saw this, but with 3.0.0-rc7-00125-gf560f66 > its making noise. I am unable to get this problem in my AR5416 :( will also try tomorrow. I am using the card for browsing etc. recently there were patches for hardware code changes. just a guess, please check does this patch helps(or is it already there). i think this will be called via ath_set_channel->ath9k_hw_reset->ath9k_hw_init_bb and may be https://patchwork.kernel.org/patch/957902/ > > Justin P. Mattock > -- shafi ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath: Unable to reset channel (2412 MHz), reset status -5 2011-07-19 15:49 ` Mohammed Shafi @ 2011-07-19 16:01 ` Justin P. Mattock 2011-07-22 5:07 ` Justin P. Mattock 1 sibling, 0 replies; 8+ messages in thread From: Justin P. Mattock @ 2011-07-19 16:01 UTC (permalink / raw) To: Mohammed Shafi Cc: netdev@vger.kernel.org, linux-wireless, linux-kernel@vger.kernel.org On 07/19/2011 08:49 AM, Mohammed Shafi wrote: > On Tue, Jul 19, 2011 at 8:55 PM, Justin P. Mattock > <justinmattock@gmail.com> wrote: >> On 07/18/2011 11:46 PM, Mohammed Shafi wrote: >>> >>> On Tue, Jul 19, 2011 at 12:05 PM, Justin P. Mattock >>> <justinmattock@gmail.com> wrote: >>>> >>>> On 07/18/2011 11:25 PM, Mohammed Shafi wrote: >>>>> >>>>> On Tue, Jul 19, 2011 at 11:43 AM, Justin P. Mattock >>>>> <justinmattock@gmail.com> wrote: >>>>>> >>>>>> seems with the latest Mainline I am getting the ath9k carpping out >>>>>> after >>>>>> a >>>>>> while of streaming(dmesg below)..: >>>>>> http://fpaste.org/D7wM/ >>>>>> >>>>>> will try a bisect if I have the time.. >>>>> >>>>> I will try to recreate here with 3.0.0-rc7-wl, we can get more >>>>> information by ath9k debug=0xffffffff. >>>>> thanks. >>>>> >>>> >>>> cool! >>>> seems to fire off randomly over here. >>> >>> I have got AR5416, will try with that. >>> >> >> I can try the bisect, but might take a while, since external >> activities(job). Seems this is just starting i.g. with >> 3.0.0-rc1 I never saw this, but with 3.0.0-rc7-00125-gf560f66 >> its making noise. > > I am unable to get this problem in my AR5416 :( will also try > tomorrow. I am using the card for browsing etc. > recently there were patches for hardware code changes. > just a guess, please check does this patch helps(or is it already > there). i think this will be called via > ath_set_channel->ath9k_hw_reset->ath9k_hw_init_bb and may be > https://patchwork.kernel.org/patch/957902/ I am not seeing this in: ar5008_hw_init_bb will apply this to the current Mainline when I get the chance and run the system to see if I get this firing off. (as for what I have, and was doing:(OS fedora 15)simply streaming radio with clients running in the background twitter, facebook, thunderbird Justin P. Mattock ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath: Unable to reset channel (2412 MHz), reset status -5 2011-07-19 15:49 ` Mohammed Shafi 2011-07-19 16:01 ` Justin P. Mattock @ 2011-07-22 5:07 ` Justin P. Mattock 1 sibling, 0 replies; 8+ messages in thread From: Justin P. Mattock @ 2011-07-22 5:07 UTC (permalink / raw) To: Mohammed Shafi Cc: netdev@vger.kernel.org, linux-wireless, linux-kernel@vger.kernel.org On 07/19/2011 08:49 AM, Mohammed Shafi wrote: > On Tue, Jul 19, 2011 at 8:55 PM, Justin P. Mattock > <justinmattock@gmail.com> wrote: >> On 07/18/2011 11:46 PM, Mohammed Shafi wrote: >>> >>> On Tue, Jul 19, 2011 at 12:05 PM, Justin P. Mattock >>> <justinmattock@gmail.com> wrote: >>>> >>>> On 07/18/2011 11:25 PM, Mohammed Shafi wrote: >>>>> >>>>> On Tue, Jul 19, 2011 at 11:43 AM, Justin P. Mattock >>>>> <justinmattock@gmail.com> wrote: >>>>>> >>>>>> seems with the latest Mainline I am getting the ath9k carpping out >>>>>> after >>>>>> a >>>>>> while of streaming(dmesg below)..: >>>>>> http://fpaste.org/D7wM/ >>>>>> >>>>>> will try a bisect if I have the time.. >>>>> >>>>> I will try to recreate here with 3.0.0-rc7-wl, we can get more >>>>> information by ath9k debug=0xffffffff. >>>>> thanks. >>>>> >>>> >>>> cool! >>>> seems to fire off randomly over here. >>> >>> I have got AR5416, will try with that. >>> >> >> I can try the bisect, but might take a while, since external >> activities(job). Seems this is just starting i.g. with >> 3.0.0-rc1 I never saw this, but with 3.0.0-rc7-00125-gf560f66 >> its making noise. > > I am unable to get this problem in my AR5416 :( will also try > tomorrow. I am using the card for browsing etc. > recently there were patches for hardware code changes. > just a guess, please check does this patch helps(or is it already > there). i think this will be called via > ath_set_channel->ath9k_hw_reset->ath9k_hw_init_bb and may be > https://patchwork.kernel.org/patch/957902/ > alright, I applied the patch above, and have ran this a few days in various hotspots etc.. unfortunantly this patch does not fix the issue. dmesg is below: http://fpaste.org/ozCA/ from what I remember, I had all my clients doing their thing, then all of a sudden everything slowly started to crap out. as for bisecting, I think this might take a while due to the inconsistancy of this(seems to show up every 4/5 boots etc..)but if I get some free time, I will have a try. Justin P. Mattock ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2011-07-22 5:07 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-07-19 6:13 ath: Unable to reset channel (2412 MHz), reset status -5 Justin P. Mattock 2011-07-19 6:25 ` Mohammed Shafi 2011-07-19 6:35 ` Justin P. Mattock 2011-07-19 6:46 ` Mohammed Shafi 2011-07-19 15:25 ` Justin P. Mattock 2011-07-19 15:49 ` Mohammed Shafi 2011-07-19 16:01 ` Justin P. Mattock 2011-07-22 5:07 ` Justin P. Mattock
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).