rtl8192cu sometimes it can authenticate to ap

linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* rtl8192cu sometimes it can authenticate to ap
@ 2011-08-09  9:16 kc
  2011-08-09 11:07 ` kc
  0 siblings, 1 reply; 11+ messages in thread
From: kc @ 2011-08-09  9:16 UTC (permalink / raw)
  To: linux-wireless

Hello all,

i have three usb sticks with the the id:
0bda:8176

I am running ubuntu maverick with the compat tree from 2011-08-08 
(downloaded this morning) and i also tried several others (dates from 15 
juli 2011).
The main problem is that sometimes i get a connection and it works like 
a charm and then all of the sudden i don't get any connection at all and 
running wpa_supplicant says time out.

i really have no idea whats wrong so if someone could help me out.
is there a way to get debugging from the rtlwifi drivers?

i got the firmware from: 
http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git

With kind regards

William

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-09  9:16 rtl8192cu sometimes it can authenticate to ap kc
@ 2011-08-09 11:07 ` kc
  2011-08-09 15:12   ` kc
  0 siblings, 1 reply; 11+ messages in thread
From: kc @ 2011-08-09 11:07 UTC (permalink / raw)
  To: linux-wireless; +Cc: kc

Hi all,

Have installed natty and also installed the snapshot.

After compile and installed the rtlwifi driver the wpa_supplicant works 
like a charm every time with all three sticks.
So i think it is something in the compat layer or userland utilities?

Anyone an idea?
I would like this to work with the maverick kernel 2.6.35 because we 
cannot upgrade right now.

With kind regards

William

On Tue, 09 Aug 2011 09:16:12 +0000, kc@cobradevil.org wrote:

> Hello all,
>
> i have three usb sticks with the the id:
> 0bda:8176
>
> I am running ubuntu maverick with the compat tree from 2011-08-08
> (downloaded this morning) and i also tried several others (dates from 
> 15
> juli 2011).
> The main problem is that sometimes i get a connection and it works 
> like
> a charm and then all of the sudden i don't get any connection at all 
> and
> running wpa_supplicant says time out.
>
> i really have no idea whats wrong so if someone could help me out.
> is there a way to get debugging from the rtlwifi drivers?
>
> i got the firmware from:
> http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git 
> [1]
>
> With kind regards
>
> William


Links:
------
[1] http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-09 11:07 ` kc
@ 2011-08-09 15:12   ` kc
  2011-08-09 16:37     ` Larry Finger
  0 siblings, 1 reply; 11+ messages in thread
From: kc @ 2011-08-09 15:12 UTC (permalink / raw)
  To: kc; +Cc: linux-wireless

Hello all,

not sure what is happening but so far i have the following results:
i downloaded the latest bleeding edge wireless from 
http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
I installed kernel headers and build-essentials end run:
./scripts/driver-select rtlwifi
make && make install

i downloaded the firmware from 
http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git

Running on Ubuntu maverick kernel 2.6.35-30 update 56 i get sometimes 
an authenticated message when running wpa_supplicant -Dnl80211 -c 
/etc/wpa_supplicant.conf -i wlan0 but most times it will timeout
Running on Ubuntu natty kernel 2.6.38-10 update 46 i always get the 
authenticated message when running wpa_supplicant -Dnl80211 -c 
/etc/wpa_supplicant.conf -i wlan0

only when using dhcp request on two accespoint i get different results 
on the natty driver but that has todo with: 
https://bugzilla.kernel.org/show_bug.cgi?id=38012 when applied i can 
connect two both accespoints.

Any ideas why it does not work on the maverick kernel?

Also when stopping the wpa_supplicant with ctrl+c and restart i first 
have to replug the device before it tries todo anything with the card.

With kind regards

William


On Tue, 09 Aug 2011 11:07:56 +0000, kc@cobradevil.org wrote:

> Hi all,
>
> Have installed natty and also installed the snapshot.
>
> After compile and installed the rtlwifi driver the wpa_supplicant 
> works
> like a charm every time with all three sticks.
> So i think it is something in the compat layer or userland utilities?
>
> Anyone an idea?
> I would like this to work with the maverick kernel 2.6.35 because we
> cannot upgrade right now.
>
> With kind regards
>
> William
>
> On Tue, 09 Aug 2011 09:16:12 +0000, kc@cobradevil.org [2]wrote:
>
>> Hello all, i have three usb sticks with the the id: 0bda:8176 I am
>> running ubuntu maverick with the compat tree from 2011-08-08
>> (downloaded this morning) and i also tried several others (dates 
>> from
>> 15 juli 2011). The main problem is that sometimes i get a connection
>> and it works like a charm and then all of the sudden i don't get any
>> connection at all and running wpa_supplicant says time out. i really
>> have no idea whats wrong so if someone could help me out. is there a
>> way to get debugging from the rtlwifi drivers? i got the firmware 
>> from:
>> http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git 
>> [1]
>> [1] With kind regards William
>
> Links:
> ------
> [1] 
> http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git
> [3]


Links:
------
[1] http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git
[2] mailto:kc@cobradevil.org
[3] http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-09 15:12   ` kc
@ 2011-08-09 16:37     ` Larry Finger
  2011-08-09 19:27       ` william
       [not found]       ` <d3faeaf2e881a324b0ad3102c10e6131@cobradevil.org>
  0 siblings, 2 replies; 11+ messages in thread
From: Larry Finger @ 2011-08-09 16:37 UTC (permalink / raw)
  To: kc; +Cc: linux-wireless

On 08/09/2011 10:12 AM, kc@cobradevil.org wrote:
> Hello all,
>
> not sure what is happening but so far i have the following results:
> i downloaded the latest bleeding edge wireless from
> http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
> I installed kernel headers and build-essentials end run:
> ./scripts/driver-select rtlwifi
> make && make install
>
> i downloaded the firmware from
> http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git
>
> Running on Ubuntu maverick kernel 2.6.35-30 update 56 i get sometimes an
> authenticated message when running wpa_supplicant -Dnl80211 -c
> /etc/wpa_supplicant.conf -i wlan0 but most times it will timeout
> Running on Ubuntu natty kernel 2.6.38-10 update 46 i always get the
> authenticated message when running wpa_supplicant -Dnl80211 -c
> /etc/wpa_supplicant.conf -i wlan0
>
> only when using dhcp request on two accespoint i get different results on the
> natty driver but that has todo with:
> https://bugzilla.kernel.org/show_bug.cgi?id=38012 when applied i can connect two
> both accespoints.
>
> Any ideas why it does not work on the maverick kernel?

How does it work at all with a 2.6.38 kernel? Driver rtl8192cu was not added to 
the kernel until 2.6 39.

> Also when stopping the wpa_supplicant with ctrl+c and restart i first have to
> replug the device before it tries todo anything with the card.

What info is in the dmesg output in this case?

To debug the authentication case, run wpa_supplicant with the "-ddd" and "-f 
wpa_supplicant.log" switches. That way you will get a log of what is going wrong.

Larry

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-09 16:37     ` Larry Finger
@ 2011-08-09 19:27       ` william
       [not found]       ` <d3faeaf2e881a324b0ad3102c10e6131@cobradevil.org>
  1 sibling, 0 replies; 11+ messages in thread
From: william @ 2011-08-09 19:27 UTC (permalink / raw)
  To: Larry Finger; +Cc: linux-wireless

[-- Attachment #1: Type: text/plain, Size: 31554 bytes --]

Ok attached log files and below my test at home

Test scenario:

@home
I have a netgear wireless router which does wpa2 aes
i cannot get it to work anymore as at work so forgive me for these mixed 
results.

What i do is compile todays compat wireless on ubuntu maverick and on natty

http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
I installed kernel headers and build-essentials end run:
./scripts/driver-select rtlwifi
make && make install

###################################################################

ubuntu maverick

###################################################################



ubuntu maverick 2.6.35-30.54:
dmesg -c  after cold boot:

plugging in adapter:
dmesg:
[  387.400102] usb 2-5: new high speed USB device using ehci_hcd and 
address 3
[  387.682348] rtl8192cu: MAC address: 00:a1:b0:89:82:1c
[  387.682361] rtl8192cu: Board Type 0
[  387.713558] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  387.713565] cfg80211: Updating information on frequency 2412 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713568] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713571] cfg80211: Updating information on frequency 2417 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713573] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713576] cfg80211: Updating information on frequency 2422 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713578] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713580] cfg80211: Updating information on frequency 2427 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713583] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713585] cfg80211: Updating information on frequency 2432 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713588] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713590] cfg80211: Updating information on frequency 2437 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713593] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713595] cfg80211: Updating information on frequency 2442 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713598] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713600] cfg80211: Updating information on frequency 2447 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713603] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713605] cfg80211: Updating information on frequency 2452 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713607] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713610] cfg80211: Updating information on frequency 2457 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713612] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713615] cfg80211: Updating information on frequency 2462 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713617] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713620] cfg80211: Disabling freq 2467 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713622] cfg80211: Disabling freq 2472 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713624] cfg80211: Disabling freq 2484 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713886] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  387.718805] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[  387.719469] usbcore: registered new interface driver rtl8192cu
[  387.740881] udev[987]: renamed network interface wlan0 to wlan1

wpa_supplicant -Dnl80211 -dd -c /etc/wpa_supplicant_thuis.conf -f 
wpa_supplicant.log -iwlan1
wpa_supplicant-ubuntu-maverick_cold_boot.log

dmesg:
[  387.400102] usb 2-5: new high speed USB device using ehci_hcd and 
address 3
[  387.682348] rtl8192cu: MAC address: 00:a1:b0:89:82:1c
[  387.682361] rtl8192cu: Board Type 0
[  387.713558] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  387.713565] cfg80211: Updating information on frequency 2412 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713568] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713571] cfg80211: Updating information on frequency 2417 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713573] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713576] cfg80211: Updating information on frequency 2422 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713578] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713580] cfg80211: Updating information on frequency 2427 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713583] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713585] cfg80211: Updating information on frequency 2432 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713588] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713590] cfg80211: Updating information on frequency 2437 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713593] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713595] cfg80211: Updating information on frequency 2442 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713598] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713600] cfg80211: Updating information on frequency 2447 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713603] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713605] cfg80211: Updating information on frequency 2452 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713607] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713610] cfg80211: Updating information on frequency 2457 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713612] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713615] cfg80211: Updating information on frequency 2462 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713617] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713620] cfg80211: Disabling freq 2467 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713622] cfg80211: Disabling freq 2472 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713624] cfg80211: Disabling freq 2484 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713886] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  387.718805] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[  387.719469] usbcore: registered new interface driver rtl8192cu
[  387.740881] udev[987]: renamed network interface wlan0 to wlan1
[  462.336237] rtl8192cu: MAC auto ON okay!
[  462.370400] rtl8192cu: Tx queue select: 0x05
[  462.371173] rtl8192c_common: Loading firmware file 
rtlwifi/rtl8192cufw.bin
[  462.774420] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  463.673151] wlan1: direct probe to e0:91:f5:7a:ae:d6 (try 1/3)
[  463.677499] wlan1: direct probe responded
[  463.690120] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1)
[  463.708429] wlan1: authenticated
[  463.708461] wlan1: associate with e0:91:f5:7a:ae:d6 (try 1)
[  463.715801] wlan1: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 
status=0 aid=3)
[  463.715808] wlan1: associated
[  463.729553] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  473.761143] wlan1: deauthenticating from e0:91:f5:7a:ae:d6 by local 
choice (reason=3)
[  473.811154] cfg80211: All devices are disconnected, going to restore 
regulatory settings
[  473.811167] cfg80211: Restoring regulatory settings
[  473.811176] cfg80211: Calling CRDA to update world regulatory domain
[  473.824224] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  473.824232] cfg80211: World regulatory domain updated:
[  473.824237] cfg80211:     (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[  473.824246] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  473.824254] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), 
(300 mBi, 2000 mBm)
[  473.824261] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), 
(300 mBi, 2000 mBm)
[  473.824268] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  473.824275] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  474.240071] wlan1: no IPv6 routers present
[  474.613195] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1)
[  474.810080] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 2)
[  475.010123] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 3)
[  475.014905] wlan1: authenticated
[  475.014939] wlan1: associate with e0:91:f5:7a:ae:d6 (try 1)
[  475.018642] wlan1: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 
status=0 aid=3)
[  475.018650] wlan1: associated
[  485.048496] wlan1: deauthenticating from e0:91:f5:7a:ae:d6 by local 
choice (reason=3)
[  485.083634] cfg80211: All devices are disconnected, going to restore 
regulatory settings
[  485.083644] cfg80211: Restoring regulatory settings
[  485.083653] cfg80211: Calling CRDA to update world regulatory domain
[  485.096588] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  485.096597] cfg80211: World regulatory domain updated:
[  485.096601] cfg80211:     (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[  485.096610] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  485.096617] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), 
(300 mBi, 2000 mBm)
[  485.096625] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), 
(300 mBi, 2000 mBm)
[  485.096632] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  485.096640] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  485.893367] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1)
[  486.092557] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 2)
[  486.290075] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 3)
[  486.490071] wlan1: authentication with e0:91:f5:7a:ae:d6 timed out


ctrl+c wpa_supplicant and starting again:
dmesg:
[  387.400102] usb 2-5: new high speed USB device using ehci_hcd and 
address 3
[  387.682348] rtl8192cu: MAC address: 00:a1:b0:89:82:1c
[  387.682361] rtl8192cu: Board Type 0
[  387.713558] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  387.713565] cfg80211: Updating information on frequency 2412 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713568] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713571] cfg80211: Updating information on frequency 2417 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713573] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713576] cfg80211: Updating information on frequency 2422 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713578] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713580] cfg80211: Updating information on frequency 2427 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713583] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713585] cfg80211: Updating information on frequency 2432 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713588] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713590] cfg80211: Updating information on frequency 2437 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713593] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713595] cfg80211: Updating information on frequency 2442 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713598] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713600] cfg80211: Updating information on frequency 2447 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713603] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713605] cfg80211: Updating information on frequency 2452 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713607] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713610] cfg80211: Updating information on frequency 2457 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713612] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713615] cfg80211: Updating information on frequency 2462 MHz for 
a 20 MHz width channel with regulatory rule:
[  387.713617] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  387.713620] cfg80211: Disabling freq 2467 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713622] cfg80211: Disabling freq 2472 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713624] cfg80211: Disabling freq 2484 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  387.713886] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  387.718805] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[  387.719469] usbcore: registered new interface driver rtl8192cu
[  387.740881] udev[987]: renamed network interface wlan0 to wlan1
[  462.336237] rtl8192cu: MAC auto ON okay!
[  462.370400] rtl8192cu: Tx queue select: 0x05
[  462.371173] rtl8192c_common: Loading firmware file 
rtlwifi/rtl8192cufw.bin
[  462.774420] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  463.673151] wlan1: direct probe to e0:91:f5:7a:ae:d6 (try 1/3)
[  463.677499] wlan1: direct probe responded
[  463.690120] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1)
[  463.708429] wlan1: authenticated
[  463.708461] wlan1: associate with e0:91:f5:7a:ae:d6 (try 1)
[  463.715801] wlan1: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 
status=0 aid=3)
[  463.715808] wlan1: associated
[  463.729553] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  473.761143] wlan1: deauthenticating from e0:91:f5:7a:ae:d6 by local 
choice (reason=3)
[  473.811154] cfg80211: All devices are disconnected, going to restore 
regulatory settings
[  473.811167] cfg80211: Restoring regulatory settings
[  473.811176] cfg80211: Calling CRDA to update world regulatory domain
[  473.824224] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  473.824232] cfg80211: World regulatory domain updated:
[  473.824237] cfg80211:     (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[  473.824246] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  473.824254] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), 
(300 mBi, 2000 mBm)
[  473.824261] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), 
(300 mBi, 2000 mBm)
[  473.824268] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  473.824275] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  474.240071] wlan1: no IPv6 routers present
[  474.613195] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1)
[  474.810080] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 2)
[  475.010123] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 3)
[  475.014905] wlan1: authenticated
[  475.014939] wlan1: associate with e0:91:f5:7a:ae:d6 (try 1)
[  475.018642] wlan1: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 
status=0 aid=3)
[  475.018650] wlan1: associated
[  485.048496] wlan1: deauthenticating from e0:91:f5:7a:ae:d6 by local 
choice (reason=3)
[  485.083634] cfg80211: All devices are disconnected, going to restore 
regulatory settings
[  485.083644] cfg80211: Restoring regulatory settings
[  485.083653] cfg80211: Calling CRDA to update world regulatory domain
[  485.096588] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  485.096597] cfg80211: World regulatory domain updated:
[  485.096601] cfg80211:     (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[  485.096610] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  485.096617] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), 
(300 mBi, 2000 mBm)
[  485.096625] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), 
(300 mBi, 2000 mBm)
[  485.096632] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  485.096640] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), 
(300 mBi, 2000 mBm)
[  485.893367] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1)
[  486.092557] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 2)
[  486.290075] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 3)
[  486.490071] wlan1: authentication with e0:91:f5:7a:ae:d6 timed out
[  612.790282] rtl8192cu: MAC auto ON okay!
[  612.828665] rtl8192cu: Tx queue select: 0x05
[  612.829415] rtl8192c_common: Loading firmware file 
rtlwifi/rtl8192cufw.bin
[  613.232099] ADDRCONF(NETDEV_UP): wlan1: link is not ready

attached wpa_supplicant-ubuntu-maverick_ctrlc.log







###################################################################

ubuntu natty

###################################################################


ubuntu natty 2.6.38-10.46:
dmesg -c  after cold boot:

plugging in adapter:
dmesg:
[  541.820017] usb 1-4: new high speed USB device using ehci_hcd and 
address 3
[  541.981323] cfg80211: Calling CRDA to update world regulatory domain
[  542.094477] rtl8192cu: MAC address: 00:a1:b0:89:82:1c
[  542.094484] rtl8192cu: Board Type 0
[  542.102603] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  542.102610] cfg80211: Updating information on frequency 2412 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102615] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102618] cfg80211: Updating information on frequency 2417 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102622] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102625] cfg80211: Updating information on frequency 2422 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102629] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102632] cfg80211: Updating information on frequency 2427 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102636] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102639] cfg80211: Updating information on frequency 2432 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102642] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102646] cfg80211: Updating information on frequency 2437 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102649] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102652] cfg80211: Updating information on frequency 2442 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102656] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102659] cfg80211: Updating information on frequency 2447 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102663] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102666] cfg80211: Updating information on frequency 2452 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102670] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102673] cfg80211: Updating information on frequency 2457 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102677] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102680] cfg80211: Updating information on frequency 2462 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102683] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102687] cfg80211: Disabling freq 2467 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102690] cfg80211: Disabling freq 2472 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102693] cfg80211: Disabling freq 2484 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102703] cfg80211: Pending regulatory request, waiting for it to 
be processed...
[  542.102760] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  542.105689] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[  542.106369] usbcore: registered new interface driver rtl8192cu


wpa_supplicant -Dnl80211 -dd -c /etc/wpa_supplicant_thuis.conf -f 
wpa_supplicant.log -iwlan0
wpa_supplicant-ubuntu-natty_cold_boot.log

dmesg:
[  541.981323] cfg80211: Calling CRDA to update world regulatory domain
[  542.094477] rtl8192cu: MAC address: 00:a1:b0:89:82:1c
[  542.094484] rtl8192cu: Board Type 0
[  542.102603] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  542.102610] cfg80211: Updating information on frequency 2412 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102615] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102618] cfg80211: Updating information on frequency 2417 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102622] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102625] cfg80211: Updating information on frequency 2422 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102629] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102632] cfg80211: Updating information on frequency 2427 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102636] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102639] cfg80211: Updating information on frequency 2432 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102642] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102646] cfg80211: Updating information on frequency 2437 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102649] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102652] cfg80211: Updating information on frequency 2442 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102656] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102659] cfg80211: Updating information on frequency 2447 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102663] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102666] cfg80211: Updating information on frequency 2452 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102670] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102673] cfg80211: Updating information on frequency 2457 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102677] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102680] cfg80211: Updating information on frequency 2462 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102683] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102687] cfg80211: Disabling freq 2467 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102690] cfg80211: Disabling freq 2472 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102693] cfg80211: Disabling freq 2484 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102703] cfg80211: Pending regulatory request, waiting for it to 
be processed...
[  542.102760] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  542.105689] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[  542.106369] usbcore: registered new interface driver rtl8192cu
[  676.832020] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga 
encoder (output 0)
[  837.368145] rtl8192cu: MAC auto ON okay!
[  837.400782] rtl8192cu: Tx queue select: 0x05
[  837.401540] rtl8192c_common: Loading firmware file 
rtlwifi/rtl8192cufw.bin
[  837.794521] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  838.635952] wlan0: authenticate with e0:91:f5:7a:ae:d6 (try 1)
[  838.640035] wlan0: authenticated
[  838.640211] wlan0: associate with e0:91:f5:7a:ae:d6 (try 1)
[  838.644032] wlan0: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 
status=0 aid=4)
[  838.644036] wlan0: associated
[  838.656495] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  838.681561] Intel AES-NI instructions are not detected.
[  838.701438] padlock_aes: VIA PadLock not detected.
[  848.816007] wlan0: no IPv6 routers present

ctrl+c wpa_supplicant and starting again:
dmesg:
[  541.820017] usb 1-4: new high speed USB device using ehci_hcd and 
address 3
[  541.981323] cfg80211: Calling CRDA to update world regulatory domain
[  542.094477] rtl8192cu: MAC address: 00:a1:b0:89:82:1c
[  542.094484] rtl8192cu: Board Type 0
[  542.102603] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  542.102610] cfg80211: Updating information on frequency 2412 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102615] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102618] cfg80211: Updating information on frequency 2417 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102622] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102625] cfg80211: Updating information on frequency 2422 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102629] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102632] cfg80211: Updating information on frequency 2427 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102636] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102639] cfg80211: Updating information on frequency 2432 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102642] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102646] cfg80211: Updating information on frequency 2437 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102649] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102652] cfg80211: Updating information on frequency 2442 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102656] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102659] cfg80211: Updating information on frequency 2447 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102663] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102666] cfg80211: Updating information on frequency 2452 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102670] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102673] cfg80211: Updating information on frequency 2457 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102677] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102680] cfg80211: Updating information on frequency 2462 MHz for 
a 20 MHz width channel with regulatory rule:
[  542.102683] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 
2000 mBm)
[  542.102687] cfg80211: Disabling freq 2467 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102690] cfg80211: Disabling freq 2472 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102693] cfg80211: Disabling freq 2484 MHz as custom regd has no 
rule that fits a 20 MHz wide channel
[  542.102703] cfg80211: Pending regulatory request, waiting for it to 
be processed...
[  542.102760] cfg80211: Ignoring regulatory request Set by core since 
the driver uses its own custom regulatory domain
[  542.105689] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[  542.106369] usbcore: registered new interface driver rtl8192cu
[  676.832020] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga 
encoder (output 0)
[  837.368145] rtl8192cu: MAC auto ON okay!
[  837.400782] rtl8192cu: Tx queue select: 0x05
[  837.401540] rtl8192c_common: Loading firmware file 
rtlwifi/rtl8192cufw.bin
[  837.794521] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  838.635952] wlan0: authenticate with e0:91:f5:7a:ae:d6 (try 1)
[  838.640035] wlan0: authenticated
[  838.640211] wlan0: associate with e0:91:f5:7a:ae:d6 (try 1)
[  838.644032] wlan0: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 
status=0 aid=4)
[  838.644036] wlan0: associated
[  838.656495] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  838.681561] Intel AES-NI instructions are not detected.
[  838.701438] padlock_aes: VIA PadLock not detected.
[  848.816007] wlan0: no IPv6 routers present
[  952.783925] wlan0: deauthenticating from e0:91:f5:7a:ae:d6 by local 
choice (reason=3)
[  952.808221] cfg80211: All devices are disconnected, going to restore 
regulatory settings
[  952.808225] cfg80211: Restoring regulatory settings
[  952.808231] cfg80211: Calling CRDA for country: US
[  975.889157] rtl8192cu: MAC auto ON okay!
[  975.921798] rtl8192cu: Tx queue select: 0x05
[  975.922442] rtl8192c_common: Loading firmware file 
rtlwifi/rtl8192cufw.bin
[  976.313109] ADDRCONF(NETDEV_UP): wlan0: link is not ready


attached wpa_supplicant-ubuntu-maverick_ctrlc.log



@@@@@@@@@@@@@@@@@@@@


on 2.6.35 i cannot do a dhcp request but i can on 2.6.38
after ctrl+c both systems are rendered useless


On 08/09/2011 06:37 PM, Larry Finger wrote:
> On 08/09/2011 10:12 AM, kc@cobradevil.org wrote:
>> Hello all,
>>
>> not sure what is happening but so far i have the following results:
>> i downloaded the latest bleeding edge wireless from
>> http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2 
>>
>> I installed kernel headers and build-essentials end run:
>> ./scripts/driver-select rtlwifi
>> make && make install
>>
>> i downloaded the firmware from
>> http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git
>>
>> Running on Ubuntu maverick kernel 2.6.35-30 update 56 i get sometimes an
>> authenticated message when running wpa_supplicant -Dnl80211 -c
>> /etc/wpa_supplicant.conf -i wlan0 but most times it will timeout
>> Running on Ubuntu natty kernel 2.6.38-10 update 46 i always get the
>> authenticated message when running wpa_supplicant -Dnl80211 -c
>> /etc/wpa_supplicant.conf -i wlan0
>>
>> only when using dhcp request on two accespoint i get different 
>> results on the
>> natty driver but that has todo with:
>> https://bugzilla.kernel.org/show_bug.cgi?id=38012 when applied i can 
>> connect two
>> both accespoints.
>>
>> Any ideas why it does not work on the maverick kernel?
>
> How does it work at all with a 2.6.38 kernel? Driver rtl8192cu was not 
> added to the kernel until 2.6 39.
>
sorry for not being clear about this but i also compiled the compat tree 
on this kernel
>> Also when stopping the wpa_supplicant with ctrl+c and restart i first 
>> have to
>> replug the device before it tries todo anything with the card.
>
> What info is in the dmesg output in this case?
>
> To debug the authentication case, run wpa_supplicant with the "-ddd" 
> and "-f wpa_supplicant.log" switches. That way you will get a log of 
> what is going wrong.
>
> Larry


[-- Attachment #2: wpa_supplicant-ubuntu-maverick_cold_boot.log --]
[-- Type: text/x-log, Size: 30666 bytes --]

Initializing interface 'wlan1' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf'
Reading configuration file '/etc/wpa_supplicant_thuis.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
PSK - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='GIGABIT_1000MBPS2'
Initializing interface (2) 'wlan1'
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:a1:b0:89:82:1c
wpa_driver_nl80211_set_wpa
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=0 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=1 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=2 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=3 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_countermeasures
wpa_driver_nl80211_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37
WPS: Build Beacon and Probe Response IEs
WPS:  * Version
WPS:  * Wi-Fi Protected Setup State (0)
WPS:  * Version
WPS:  * Wi-Fi Protected Setup State (0)
WPS:  * Response Type (2)
WPS:  * UUID-E
WPS:  * Manufacturer
WPS:  * Model Name
WPS:  * Model Number
WPS:  * Serial Number
WPS:  * Primary Device Type
WPS:  * Device Name
WPS:  * Config Methods (0)
WPS:  * RF Bands (3)
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan1
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received scan results (0 BSSes)
Cached scan results are empty - not posting
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (2 BSSes)
New scan results available
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411
   selected based on RSN IE
   selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2'
Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_nl80211_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_nl80211_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b04 len=16
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b1a len=33
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8c08 len=181
AssocResp IE wireless event - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 01 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b15 len=24
Wireless event: new AP: e0:91:f5:7a:ae:d6
Association info event
resp_ies - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 01 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATING -> ASSOCIATED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=e0:91:f5:7a:ae:d6
No keys have been configured - skip key clearing
Associated with e0:91:f5:7a:ae:d6
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RX EAPOL from e0:91:f5:7a:ae:d6
RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 0c 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=2 type=3 length=117
  EAPOL-Key type=2
  key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  key_length=16 key_data_length=22
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 0c
  key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 0c 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: no matching PMKID found
WPA: Renewed SNonce - hexdump(len=32): 87 2a 20 06 cb 49 f2 19 7b fe cf 79 5c 30 7b b4 2f 7c 87 5d 52 b7 c5 ce 28 34 0e 22 bf d0 28 bd
WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 0c 87 2a 20 06 cb 49 f2 19 7b fe cf 79 5c 30 7b b4 2f 7c 87 5d 52 b7 c5 ce 28 34 0e 22 bf d0 28 bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 85 7a 29 c4 c3 66 44 3d db d1 07 df d2 61 30 10 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
EAPOL: startWhen --> 0
EAPOL: disable timer tick
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
RX EAPOL from e0:91:f5:7a:ae:d6
RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 0d 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
IEEE 802.1X RX: version=2 type=3 length=117
  EAPOL-Key type=2
  key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  key_length=16 key_data_length=22
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 0d
  key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 0d 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: no matching PMKID found
WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 0d 87 2a 20 06 cb 49 f2 19 7b fe cf 79 5c 30 7b b4 2f 7c 87 5d 52 b7 c5 ce 28 34 0e 22 bf d0 28 bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e8 e9 89 d2 c0 5a d2 f0 3a 8b 0a 86 c5 e8 81 ea 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
Authentication with e0:91:f5:7a:ae:d6 timed out.
Added BSSID e0:91:f5:7a:ae:d6 into blacklist
wpa_driver_nl80211_disassociate
No keys have been configured - skip key clearing
State: 4WAY_HANDSHAKE -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b15 len=24
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:00:00:00:00:00 into blacklist
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=0 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=1 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=2 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=3 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0xa7ae28 key_idx=0 set_tx=0 seq_len=0 key_len=0
   addr=00:00:00:00:00:00
nl80211: set_key failed; err=-2
State: DISCONNECTED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (2 BSSes)
New scan results available
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x1041 len=1
WPS: attr type=0x103b len=1
WPS: attr type=0x1047 len=16
WPS: attr type=0x1021 len=13
WPS: attr type=0x1023 len=8
WPS: attr type=0x1024 len=8
WPS: attr type=0x1042 len=4
WPS: attr type=0x1054 len=8
WPS: attr type=0x1011 len=8
WPS: attr type=0x1008 len=2
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x1041 len=1
WPS: attr type=0x103b len=1
WPS: attr type=0x1047 len=16
WPS: attr type=0x1021 len=13
WPS: attr type=0x1023 len=8
WPS: attr type=0x1024 len=8
WPS: attr type=0x1042 len=4
WPS: attr type=0x1054 len=8
WPS: attr type=0x1011 len=8
WPS: attr type=0x1008 len=2
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411
   selected based on RSN IE
   selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2'
Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_nl80211_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_nl80211_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b04 len=16
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b1a len=33
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8c08 len=181
AssocResp IE wireless event - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 01 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b15 len=24
Wireless event: new AP: e0:91:f5:7a:ae:d6
Association info event
resp_ies - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 01 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATING -> ASSOCIATED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=e0:91:f5:7a:ae:d6
No keys have been configured - skip key clearing
Associated with e0:91:f5:7a:ae:d6
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RX EAPOL from e0:91:f5:7a:ae:d6
RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 00 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=2 type=3 length=117
  EAPOL-Key type=2
  key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  key_length=16 key_data_length=22
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 00 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: no matching PMKID found
WPA: Renewed SNonce - hexdump(len=32): 9d f6 33 cf 7a 53 60 f9 4a b6 f9 5e c5 0d 86 bc ab 26 1c bd 66 b6 9b 03 34 05 3b e8 d1 e1 05 c1
WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 00 9d f6 33 cf 7a 53 60 f9 4a b6 f9 5e c5 0d 86 bc ab 26 1c bd 66 b6 9b 03 34 05 3b e8 d1 e1 05 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ac 1b ac f5 71 ea cb 56 31 6e 85 5e fb 65 02 8f 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
EAPOL: startWhen --> 0
EAPOL: disable timer tick
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
RX EAPOL from e0:91:f5:7a:ae:d6
RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
IEEE 802.1X RX: version=2 type=3 length=117
  EAPOL-Key type=2
  key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  key_length=16 key_data_length=22
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
  key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: no matching PMKID found
WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 9d f6 33 cf 7a 53 60 f9 4a b6 f9 5e c5 0d 86 bc ab 26 1c bd 66 b6 9b 03 34 05 3b e8 d1 e1 05 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5f 5e bc 6d a4 ad 99 48 b4 3d b5 31 b9 75 63 53 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
Authentication with e0:91:f5:7a:ae:d6 timed out.
BSSID e0:91:f5:7a:ae:d6 blacklist count incremented to 2
wpa_driver_nl80211_disassociate
No keys have been configured - skip key clearing
State: 4WAY_HANDSHAKE -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b15 len=24
Wireless event: new AP: 00:00:00:00:00:00
BSSID 00:00:00:00:00:00 blacklist count incremented to 2
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=0 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=1 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=2 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=3 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0xa7ae28 key_idx=0 set_tx=0 seq_len=0 key_len=0
   addr=00:00:00:00:00:00
nl80211: set_key failed; err=-2
State: SCANNING -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
nl80211: Event message available
nl80211: New scan results available
Received scan results (1 BSSes)
New scan results available
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x1041 len=1
WPS: attr type=0x103b len=1
WPS: attr type=0x1047 len=16
WPS: attr type=0x1021 len=13
WPS: attr type=0x1023 len=8
WPS: attr type=0x1024 len=8
WPS: attr type=0x1042 len=4
WPS: attr type=0x1054 len=8
WPS: attr type=0x1011 len=8
WPS: attr type=0x1008 len=2
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x1041 len=1
WPS: attr type=0x103b len=1
WPS: attr type=0x1047 len=16
WPS: attr type=0x1021 len=13
WPS: attr type=0x1023 len=8
WPS: attr type=0x1024 len=8
WPS: attr type=0x1042 len=4
WPS: attr type=0x1054 len=8
WPS: attr type=0x1011 len=8
WPS: attr type=0x1008 len=2
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411
   skip - blacklisted
Try to find non-WPA AP
0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411
   skip - blacklisted
No APs found - clear blacklist and try again
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Removed BSSID e0:91:f5:7a:ae:d6 from blacklist (clear)
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411
   selected based on RSN IE
   selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2'
Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_nl80211_set_drop_unencrypted
State: DISCONNECTED -> ASSOCIATING
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_nl80211_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b04 len=16
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b1a len=33
Authentication with e0:91:f5:7a:ae:d6 timed out.
Added BSSID e0:91:f5:7a:ae:d6 into blacklist
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No APs found - clear blacklist and try again
Removed BSSID e0:91:f5:7a:ae:d6 from blacklist (clear)
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan1
No keys have been configured - skip key clearing
State: SCANNING -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
wpa_driver_nl80211_set_wpa
wpa_driver_nl80211_set_drop_unencrypted
wpa_driver_nl80211_set_countermeasures
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6

[-- Attachment #3: wpa_supplicant-ubuntu-maverick_ctrlc.log --]
[-- Type: text/x-log, Size: 6520 bytes --]

Initializing interface 'wlan1' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf'
Reading configuration file '/etc/wpa_supplicant_thuis.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
PSK - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='GIGABIT_1000MBPS2'
Initializing interface (2) 'wlan1'
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:a1:b0:89:82:1c
wpa_driver_nl80211_set_wpa
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=0 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=1 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=2 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=3 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_countermeasures
wpa_driver_nl80211_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37
WPS: Build Beacon and Probe Response IEs
WPS:  * Version
WPS:  * Wi-Fi Protected Setup State (0)
WPS:  * Version
WPS:  * Wi-Fi Protected Setup State (0)
WPS:  * Response Type (2)
WPS:  * UUID-E
WPS:  * Manufacturer
WPS:  * Model Name
WPS:  * Model Number
WPS:  * Serial Number
WPS:  * Primary Device Type
WPS:  * Device Name
WPS:  * Config Methods (0)
WPS:  * RF Bands (3)
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan1
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
EAPOL: disable timer tick
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received scan results (0 BSSes)
Cached scan results are empty - not posting
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=16
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan1
No keys have been configured - skip key clearing
State: SCANNING -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_nl80211_set_wpa
wpa_driver_nl80211_set_drop_unencrypted
wpa_driver_nl80211_set_countermeasures
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6

[-- Attachment #4: wpa_supplicant-ubuntu-natty_cold_boot.log --]
[-- Type: text/x-log, Size: 16826 bytes --]

Initializing interface 'wlan0' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf'
Reading configuration file '/etc/wpa_supplicant_thuis.conf'
Line: 2 - start of a new network block
ssid - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
PSK - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='GIGABIT_1000MBPS2'
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:a1:b0:89:82:1c
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (3 BSSes)
BSS: Start scan result update 1
BSS: Add new id 0 BSSID e0:91:f5:7a:ae:d6 SSID 'GIGABIT_1000MBPS2'
BSS: Add new id 1 BSSID 88:25:2c:bc:be:9b SSID ''
BSS: Add new id 2 BSSID 00:22:3f:10:79:38 SSID 'volley'
New scan results available
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x1041 len=1
WPS: attr type=0x103b len=1
WPS: attr type=0x1047 len=16
WPS: attr type=0x1021 len=13
WPS: attr type=0x1023 len=8
WPS: attr type=0x1024 len=8
WPS: attr type=0x1042 len=4
WPS: attr type=0x1054 len=8
WPS: attr type=0x1011 len=8
WPS: attr type=0x1008 len=2
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x1041 len=1
WPS: attr type=0x103b len=1
WPS: attr type=0x1047 len=16
WPS: attr type=0x1021 len=13
WPS: attr type=0x1023 len=8
WPS: attr type=0x1024 len=8
WPS: attr type=0x1042 len=4
WPS: attr type=0x1054 len=8
WPS: attr type=0x1011 len=8
WPS: attr type=0x1008 len=2
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411
   selected based on RSN IE
   selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2'
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
Cancelling scan request
Trying to authenticate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz)
No keys have been configured - skip key clearing
State: SCANNING -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portControl=Auto
EAPOL: Supplicant port status: Unauthorized
nl80211: Authenticate (ifindex=3)
  * bssid=e0:91:f5:7a:ae:d6
  * freq=2412
  * SSID - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
  * IEs - hexdump(len=0): [NULL]
  * Auth Type 0
nl80211: Authentication request send successfully
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
nl80211: Event message available
nl80211: MLME event 37
nl80211: MLME event frame - hexdump(len=41): b0 00 3a 01 00 a1 b0 89 82 1c e0 91 f5 7a ae d6 e0 91 f5 7a ae d6 20 0b 00 00 02 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00
SME: Authentication response: peer=e0:91:f5:7a:ae:d6 auth_type=0 status_code=0
SME: Authentication response IEs - hexdump(len=11): dd 09 00 10 18 02 02 f0 04 00 00
Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz)
State: AUTHENTICATING -> ASSOCIATING
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Associate (ifindex=3)
  * bssid=e0:91:f5:7a:ae:d6
  * freq=2412
  * SSID - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
  * IEs - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Association request send successfully
nl80211: Event message available
nl80211: Ignored unknown event (cmd=19)
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
nl80211: Event message available
nl80211: MLME event 38
nl80211: MLME event frame - hexdump(len=195): 10 00 3a 01 00 a1 b0 89 82 1c e0 91 f5 7a ae d6 e0 91 f5 7a ae d6 30 0b 11 04 00 00 04 c0 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Association info event
resp_ies - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
freq=2412 MHz
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
State: ASSOCIATING -> ASSOCIATED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=e0:91:f5:7a:ae:d6
No keys have been configured - skip key clearing
Associated with e0:91:f5:7a:ae:d6
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
nl80211: Event message available
nl80211: Ignore connect event (cmd=46) when using userspace SME
RX EAPOL from e0:91:f5:7a:ae:d6
RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 00 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=2 type=3 length=117
  EAPOL-Key type=2
  key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  key_length=16 key_data_length=22
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 00 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: no matching PMKID found
WPA: Renewed SNonce - hexdump(len=32): 37 6d db 0e b3 52 09 45 bc 9f 4c 55 eb 55 b3 e1 1a 84 5d 49 a8 62 c6 9f cd c8 ef 4b 31 53 42 2a
WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 00 37 6d db 0e b3 52 09 45 bc 9f 4c 55 eb 55 b3 e1 1a 84 5d 49 a8 62 c6 9f cd c8 ef 4b 31 53 42 2a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 8b 16 3f ec 5d 74 14 48 41 38 88 2e f3 14 ad 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
RX EAPOL from e0:91:f5:7a:ae:d6
RX EAPOL - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 df 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d4 db 32 c3 c2 99 b3 75 1f e5 72 83 ef d1 b6 e2 00 38 bf 0a a4 da 23 5f bc 27 50 80 9f 44 8d 4c 87 4a 84 82 af 57 0e 8f 81 20 a7 6a e3 39 96 e7 1b 26 08 33 c2 34 4e e6 7c 06 ea 96 f3 28 8f bf 0c 37 ea 56 0a 8d 09 31 24 42
IEEE 802.1X RX: version=2 type=3 length=151
  EAPOL-Key type=2
  key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
  key_length=16 key_data_length=56
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
  key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8
  key_iv - hexdump(len=16): 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9
  key_rsc - hexdump(len=8): df 05 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): d4 db 32 c3 c2 99 b3 75 1f e5 72 83 ef d1 b6 e2
WPA: RX EAPOL-Key - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 df 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d4 db 32 c3 c2 99 b3 75 1f e5 72 83 ef d1 b6 e2 00 38 bf 0a a4 da 23 5f bc 27 50 80 9f 44 8d 4c 87 4a 84 82 af 57 0e 8f 81 20 a7 6a e3 39 96 e7 1b 26 08 33 c2 34 4e e6 7c 06 ea 96 f3 28 8f bf 0c 37 ea 56 0a 8d 09 31 24 42
RSN: encrypted key data - hexdump(len=56): bf 0a a4 da 23 5f bc 27 50 80 9f 44 8d 4c 87 4a 84 82 af 57 0e 8f 81 20 a7 6a e3 39 96 e7 1b 26 08 33 c2 34 4e e6 7c 06 ea 96 f3 28 8f bf 0c 37 ea 56 0a 8d 09 31 24 42
WPA: decrypted EAPOL-Key key data - hexdump(len=48): [REMOVED]
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 3 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2)
WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 01 00 29 6f 09 48 2c 45 02 3f c9 0f a2 8d 42 22 52 3d dd 00
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED]
WPA: Sending EAPOL-Key 4/4
WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 66 c3 21 19 a3 e0 db fe 3d 27 97 e9 1a 39 9d 89 00 00
WPA: Installing PTK to the driver.
wpa_driver_nl80211_set_key: ifindex=3 alg=3 addr=0x9efd1a0 key_idx=0 set_tx=1 seq_len=6 key_len=16
   addr=e0:91:f5:7a:ae:d6
EAPOL: External notification - portValid=1
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED]
WPA: Group Key - hexdump(len=16): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16).
WPA: RSC - hexdump(len=6): df 05 00 00 00 00
wpa_driver_nl80211_set_key: ifindex=3 alg=3 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=6 key_len=16
WPA: Key negotiation completed with e0:91:f5:7a:ae:d6 [PTK=CCMP GTK=CCMP]
Cancelling authentication timeout
State: GROUP_HANDSHAKE -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to e0:91:f5:7a:ae:d6 completed (auth) [id=0 id_str=]
wpa_driver_nl80211_set_operstate: operstate 0->1 (UP)
netlink: Operstate: linkmode=-1, operstate=6
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: Supplicant port status: Authorized
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed successfully
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
EAPOL: startWhen --> 0
EAPOL: disable timer tick
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
wpa_driver_nl80211_deauthenticate
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x9efa844 key_idx=0 set_tx=0 seq_len=0 key_len=0
   addr=e0:91:f5:7a:ae:d6
State: COMPLETED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 1->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
No keys have been configured - skip key clearing
BSS: Remove id 0 BSSID e0:91:f5:7a:ae:d6 SSID 'GIGABIT_1000MBPS2'
BSS: Remove id 1 BSSID 88:25:2c:bc:be:9b SSID ''
BSS: Remove id 2 BSSID 00:22:3f:10:79:38 SSID 'volley'
Cancelling scan request
Cancelling authentication timeout
netlink: Operstate: linkmode=0, operstate=6

[-- Attachment #5: wpa_supplicant-ubuntu-natty_ctrlc.log --]
[-- Type: text/x-log, Size: 27436 bytes --]

Initializing interface 'wlan0' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf'
Reading configuration file '/etc/wpa_supplicant_thuis.conf'
Line: 2 - start of a new network block
ssid - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
PSK - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='GIGABIT_1000MBPS2'
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:a1:b0:89:82:1c
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 1
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 2
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 3
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 4
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 5
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
No keys have been configured - skip key clearing
State: SCANNING -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
netlink: Operstate: linkmode=0, operstate=6
Initializing interface 'wlan0' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf'
Reading configuration file '/etc/wpa_supplicant_thuis.conf'
Line: 2 - start of a new network block
ssid - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
PSK - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='GIGABIT_1000MBPS2'
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:a1:b0:89:82:1c
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (2 BSSes)
BSS: Start scan result update 1
BSS: Add new id 0 BSSID 00:22:3f:10:79:38 SSID 'volley'
BSS: Add new id 1 BSSID e0:91:f5:7a:ae:d6 SSID 'GIGABIT_1000MBPS2'
New scan results available
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x1041 len=1
WPS: attr type=0x103b len=1
WPS: attr type=0x1047 len=16
WPS: attr type=0x1021 len=13
WPS: attr type=0x1023 len=8
WPS: attr type=0x1024 len=8
WPS: attr type=0x1042 len=4
WPS: attr type=0x1054 len=8
WPS: attr type=0x1011 len=8
WPS: attr type=0x1008 len=2
WPS: attr type=0x104a len=1
WPS: attr type=0x1044 len=1
WPS: attr type=0x1041 len=1
WPS: attr type=0x103b len=1
WPS: attr type=0x1047 len=16
WPS: attr type=0x1021 len=13
WPS: attr type=0x1023 len=8
WPS: attr type=0x1024 len=8
WPS: attr type=0x1042 len=4
WPS: attr type=0x1054 len=8
WPS: attr type=0x1011 len=8
WPS: attr type=0x1008 len=2
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:22:3f:10:79:38 ssid='volley' wpa_ie_len=24 rsn_ie_len=0 caps=0x411
   skip - SSID mismatch
1: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411
   selected based on RSN IE
   selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2'
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
Cancelling scan request
Trying to authenticate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz)
No keys have been configured - skip key clearing
State: SCANNING -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portControl=Auto
EAPOL: Supplicant port status: Unauthorized
nl80211: Authenticate (ifindex=4)
  * bssid=e0:91:f5:7a:ae:d6
  * freq=2412
  * SSID - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
  * IEs - hexdump(len=0): [NULL]
  * Auth Type 0
nl80211: Authentication request send successfully
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
nl80211: Event message available
nl80211: MLME event 37
nl80211: MLME event frame - hexdump(len=41): b0 00 3a 01 00 a1 b0 89 82 1c e0 91 f5 7a ae d6 e0 91 f5 7a ae d6 90 05 00 00 02 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00
SME: Authentication response: peer=e0:91:f5:7a:ae:d6 auth_type=0 status_code=0
SME: Authentication response IEs - hexdump(len=11): dd 09 00 10 18 02 02 f0 04 00 00
Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz)
State: AUTHENTICATING -> ASSOCIATING
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Associate (ifindex=4)
  * bssid=e0:91:f5:7a:ae:d6
  * freq=2412
  * SSID - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
  * IEs - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Association request send successfully
nl80211: Event message available
nl80211: Ignored unknown event (cmd=19)
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
nl80211: Event message available
nl80211: MLME event 38
nl80211: MLME event frame - hexdump(len=195): 10 00 3a 01 00 a1 b0 89 82 1c e0 91 f5 7a ae d6 e0 91 f5 7a ae d6 a0 05 11 04 00 00 04 c0 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Association info event
resp_ies - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
freq=2412 MHz
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
State: ASSOCIATING -> ASSOCIATED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=e0:91:f5:7a:ae:d6
No keys have been configured - skip key clearing
Associated with e0:91:f5:7a:ae:d6
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
nl80211: Event message available
nl80211: Ignore connect event (cmd=46) when using userspace SME
RX EAPOL from e0:91:f5:7a:ae:d6
RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=2 type=3 length=117
  EAPOL-Key type=2
  key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  key_length=16 key_data_length=22
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
  key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b
RSN: no matching PMKID found
WPA: Renewed SNonce - hexdump(len=32): 22 fb 6b 50 8a f1 88 da 51 f2 eb 61 72 a4 b1 a1 ea 21 a6 6d 6d 1a 88 8c 25 64 05 31 5b f3 1d bf
WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 22 fb 6b 50 8a f1 88 da 51 f2 eb 61 72 a4 b1 a1 ea 21 a6 6d 6d 1a 88 8c 25 64 05 31 5b f3 1d bf 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c6 b4 77 1f 95 a5 d0 eb f9 fc 57 66 69 1b 51 d8 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
RX EAPOL from e0:91:f5:7a:ae:d6
RX EAPOL - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 da e5 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ef 49 73 34 23 25 10 e8 bb 38 f4 d5 13 8a 74 e4 00 38 f6 87 7e d1 67 ed 93 8b 58 c2 67 4e f8 78 13 fa a1 33 94 f5 95 55 a4 f2 53 9e 6a e2 4c 29 a8 76 da 05 20 d3 02 3b 80 1a c1 0c f7 e6 aa 27 45 1c 9c 6b 6c a8 29 30 af 37
IEEE 802.1X RX: version=2 type=3 length=151
  EAPOL-Key type=2
  key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
  key_length=16 key_data_length=56
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
  key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9
  key_iv - hexdump(len=16): 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 da
  key_rsc - hexdump(len=8): e5 05 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): ef 49 73 34 23 25 10 e8 bb 38 f4 d5 13 8a 74 e4
WPA: RX EAPOL-Key - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 da e5 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ef 49 73 34 23 25 10 e8 bb 38 f4 d5 13 8a 74 e4 00 38 f6 87 7e d1 67 ed 93 8b 58 c2 67 4e f8 78 13 fa a1 33 94 f5 95 55 a4 f2 53 9e 6a e2 4c 29 a8 76 da 05 20 d3 02 3b 80 1a c1 0c f7 e6 aa 27 45 1c 9c 6b 6c a8 29 30 af 37
RSN: encrypted key data - hexdump(len=56): f6 87 7e d1 67 ed 93 8b 58 c2 67 4e f8 78 13 fa a1 33 94 f5 95 55 a4 f2 53 9e 6a e2 4c 29 a8 76 da 05 20 d3 02 3b 80 1a c1 0c f7 e6 aa 27 45 1c 9c 6b 6c a8 29 30 af 37
WPA: decrypted EAPOL-Key key data - hexdump(len=48): [REMOVED]
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 3 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2)
WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 01 00 29 6f 09 48 2c 45 02 3f c9 0f a2 8d 42 22 52 3d dd 00
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED]
WPA: Sending EAPOL-Key 4/4
WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f6 32 87 f4 77 44 79 37 c8 79 e6 3b 23 9f f9 74 00 00
WPA: Installing PTK to the driver.
wpa_driver_nl80211_set_key: ifindex=4 alg=3 addr=0x99151a0 key_idx=0 set_tx=1 seq_len=6 key_len=16
   addr=e0:91:f5:7a:ae:d6
EAPOL: External notification - portValid=1
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED]
WPA: Group Key - hexdump(len=16): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16).
WPA: RSC - hexdump(len=6): e5 05 00 00 00 00
wpa_driver_nl80211_set_key: ifindex=4 alg=3 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=6 key_len=16
WPA: Key negotiation completed with e0:91:f5:7a:ae:d6 [PTK=CCMP GTK=CCMP]
Cancelling authentication timeout
State: GROUP_HANDSHAKE -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to e0:91:f5:7a:ae:d6 completed (auth) [id=0 id_str=]
wpa_driver_nl80211_set_operstate: operstate 0->1 (UP)
netlink: Operstate: linkmode=-1, operstate=6
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: Supplicant port status: Authorized
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed successfully
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
EAPOL: startWhen --> 0
EAPOL: disable timer tick
BSS: Expire BSS 0 due to age
BSS: Remove id 0 BSSID 00:22:3f:10:79:38 SSID 'volley'
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
wpa_driver_nl80211_deauthenticate
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x9912844 key_idx=0 set_tx=0 seq_len=0 key_len=0
   addr=e0:91:f5:7a:ae:d6
State: COMPLETED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 1->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
No keys have been configured - skip key clearing
BSS: Remove id 1 BSSID e0:91:f5:7a:ae:d6 SSID 'GIGABIT_1000MBPS2'
Cancelling scan request
Cancelling authentication timeout
netlink: Operstate: linkmode=0, operstate=6
Initializing interface 'wlan0' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf'
Reading configuration file '/etc/wpa_supplicant_thuis.conf'
Line: 2 - start of a new network block
ssid - hexdump_ascii(len=17):
     47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53   GIGABIT_1000MBPS
     32                                                2               
PSK - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='GIGABIT_1000MBPS2'
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:a1:b0:89:82:1c
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 1
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 2
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 3
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 4
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 5
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (0 BSSes)
BSS: Start scan result update 6
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable network found
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

^ permalink raw reply	[flat|nested] 11+ messages in thread

[parent not found: <d3faeaf2e881a324b0ad3102c10e6131@cobradevil.org>]

* Re: rtl8192cu sometimes it can authenticate to ap
       [not found]       ` <d3faeaf2e881a324b0ad3102c10e6131@cobradevil.org>
@ 2011-08-10 14:57         ` Larry Finger
  2011-08-11 14:23           ` kc
  0 siblings, 1 reply; 11+ messages in thread
From: Larry Finger @ 2011-08-10 14:57 UTC (permalink / raw)
  To: kc; +Cc: wireless

On 08/10/2011 08:32 AM, kc@cobradevil.org wrote:
> Hello Larry,
>
> did you receive my last email with the log files?
> i'm not sure if that the right information so if you need more the please let me
> know.

Yes, I got them.

So far, the only conclusion from them is that you should install the CRDA 
package. That is not the cause of your problem, but it needs to be done.

I can duplicate the problem here and find that it occurs between 3.0 and 
3.1-rc1. I first tried to bisect testing only drivers/net/wireless/rtlwifi, 
net/mac80211 and net/wireless directories. That led to an impossible "bad" 
commit, thus I'm having to bisect the whole tree.

I'll let you know what I find.

Larry

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-10 14:57         ` Larry Finger
@ 2011-08-11 14:23           ` kc
  2011-08-11 14:37             ` Larry Finger
  0 siblings, 1 reply; 11+ messages in thread
From: kc @ 2011-08-11 14:23 UTC (permalink / raw)
  To: Larry Finger; +Cc: wireless



On Wed, 10 Aug 2011 09:57:27 -0500, Larry Finger wrote:
> On 08/10/2011 08:32 AM, kc@cobradevil.org wrote:
>> Hello Larry,
>>
>> did you receive my last email with the log files?
>> i'm not sure if that the right information so if you need more the 
>> please let me
>> know.
>
> Yes, I got them.
>
> So far, the only conclusion from them is that you should install the
> CRDA package. That is not the cause of your problem, but it needs to
> be done.
>
> I can duplicate the problem here and find that it occurs between 3.0
> and 3.1-rc1. I first tried to bisect testing only
> drivers/net/wireless/rtlwifi, net/mac80211 and net/wireless
> directories. That led to an impossible "bad" commit, thus I'm having
> to bisect the whole tree.

I have now tried several compat files til may 28 but none of them seems 
to work with maverick at all. Do i need some updated files on the client 
to be able to use the new compat tree?

I thought that the compat tree would work without changes on kernel 
from > 2.6.30 is that right?

>
> I'll let you know what I find.
>
> Larry


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-11 14:23           ` kc
@ 2011-08-11 14:37             ` Larry Finger
  2011-08-11 14:42               ` kc
  0 siblings, 1 reply; 11+ messages in thread
From: Larry Finger @ 2011-08-11 14:37 UTC (permalink / raw)
  To: kc; +Cc: wireless

On 08/11/2011 09:23 AM, kc@cobradevil.org wrote:
> I have now tried several compat files til may 28 but none of them seems to work
> with maverick at all. Do i need some updated files on the client to be able to
> use the new compat tree?
>
> I thought that the compat tree would work without changes on kernel from >
> 2.6.30 is that right?

I have no idea what maverick is. I suppose it to be some release of Ubuntu, but 
you really need to specify a kernel version, not a release name. Many of us do 
not use any Debian-based systems for very good reasons.

The compat tree will work without changes on any kernel on which it will 
compile, AS LONG AS THE REST OF THE KERNEL DOES NOT BREAK THE WIRELESS.

My full bisection ended up in am impossible result.

The only other thing I can add at the moment, is that rtl8192cu works with WEP 
encryption, thus the part that broke is WPA and WPA2.

Larry

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-11 14:37             ` Larry Finger
@ 2011-08-11 14:42               ` kc
  2011-08-11 15:59                 ` Larry Finger
  0 siblings, 1 reply; 11+ messages in thread
From: kc @ 2011-08-11 14:42 UTC (permalink / raw)
  To: Larry Finger; +Cc: wireless



On Thu, 11 Aug 2011 09:37:04 -0500, Larry Finger wrote:
> On 08/11/2011 09:23 AM, kc@cobradevil.org wrote:
>> I have now tried several compat files til may 28 but none of them 
>> seems to work
>> with maverick at all. Do i need some updated files on the client to 
>> be able to
>> use the new compat tree?
>>
>> I thought that the compat tree would work without changes on kernel 
>> from >
>> 2.6.30 is that right?
>
> I have no idea what maverick is. I suppose it to be some release of
> Ubuntu, but you really need to specify a kernel version, not a 
> release
> name. Many of us do not use any Debian-based systems for very good
> reasons.

Sorry for that. The kernel is 2.6.35 but your answer makes it clear it 
should work with no extra userland tools.
>
> The compat tree will work without changes on any kernel on which it
> will compile, AS LONG AS THE REST OF THE KERNEL DOES NOT BREAK THE
> WIRELESS.
>
> My full bisection ended up in am impossible result.
>
> The only other thing I can add at the moment, is that rtl8192cu works
> with WEP encryption, thus the part that broke is WPA and WPA2.

Ok but did the driver work before with wpa and or wpa2?
If so do you have an idea which date the compat file should be?

If not then i will have to wait for a fix but i can tell people whats 
wrong.

Larry, thank you very much for your responses.

With kind regards

William van de Velde

>
> Larry


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-11 14:42               ` kc
@ 2011-08-11 15:59                 ` Larry Finger
  2011-08-24 18:35                   ` william
  0 siblings, 1 reply; 11+ messages in thread
From: Larry Finger @ 2011-08-11 15:59 UTC (permalink / raw)
  To: kc; +Cc: wireless

On 08/11/2011 09:42 AM, kc@cobradevil.org wrote:
>
>
> On Thu, 11 Aug 2011 09:37:04 -0500, Larry Finger wrote:
>> On 08/11/2011 09:23 AM, kc@cobradevil.org wrote:
>>> I have now tried several compat files til may 28 but none of them seems to work
>>> with maverick at all. Do i need some updated files on the client to be able to
>>> use the new compat tree?
>>>
>>> I thought that the compat tree would work without changes on kernel from >
>>> 2.6.30 is that right?
>>
>> I have no idea what maverick is. I suppose it to be some release of
>> Ubuntu, but you really need to specify a kernel version, not a release
>> name. Many of us do not use any Debian-based systems for very good
>> reasons.
>
> Sorry for that. The kernel is 2.6.35 but your answer makes it clear it should
> work with no extra userland tools.
>>
>> The compat tree will work without changes on any kernel on which it
>> will compile, AS LONG AS THE REST OF THE KERNEL DOES NOT BREAK THE
>> WIRELESS.
>>
>> My full bisection ended up in am impossible result.
>>
>> The only other thing I can add at the moment, is that rtl8192cu works
>> with WEP encryption, thus the part that broke is WPA and WPA2.
>
> Ok but did the driver work before with wpa and or wpa2?
> If so do you have an idea which date the compat file should be?
>
> If not then i will have to wait for a fix but i can tell people whats wrong.

It works with wireless-testing kernel 3.0, but not with 3.1-rc1. There were no 
changes in rtl8192cu in the interum - this problem has me baffled for the 
moment. According to the NetworkManager log, the device authenticates correctly, 
but it never manages to get an IP.

Larry

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: rtl8192cu sometimes it can authenticate to ap
  2011-08-11 15:59                 ` Larry Finger
@ 2011-08-24 18:35                   ` william
  0 siblings, 0 replies; 11+ messages in thread
From: william @ 2011-08-24 18:35 UTC (permalink / raw)
  To: Larry Finger; +Cc: wireless

Hello Larry,

any updates on this one?

With kind regards

William

On 08/11/2011 05:59 PM, Larry Finger wrote:
>>
>>
>> If not then i will have to wait for a fix but i can tell people whats 
>> wrong.
>
> It works with wireless-testing kernel 3.0, but not with 3.1-rc1. There 
> were no changes in rtl8192cu in the interum - this problem has me 
> baffled for the moment. According to the NetworkManager log, the 
> device authenticates correctly, but it never manages to get an IP.


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2011-08-24 18:35 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-08-09  9:16 rtl8192cu sometimes it can authenticate to ap kc
2011-08-09 11:07 ` kc
2011-08-09 15:12   ` kc
2011-08-09 16:37     ` Larry Finger
2011-08-09 19:27       ` william
     [not found]       ` <d3faeaf2e881a324b0ad3102c10e6131@cobradevil.org>
2011-08-10 14:57         ` Larry Finger
2011-08-11 14:23           ` kc
2011-08-11 14:37             ` Larry Finger
2011-08-11 14:42               ` kc
2011-08-11 15:59                 ` Larry Finger
2011-08-24 18:35                   ` william

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).