From: Andreas Hartmann <andihartmann@01019freenet.de>
To: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: ath9k get's completely knocked out by rt3572 device
Date: Wed, 25 Jan 2012 09:15:05 +0100 [thread overview]
Message-ID: <4F1FBA09.3000003@01019freenet.de> (raw)
In-Reply-To: <13411135.eH6opTgxBo@helmutmobil.site>
Hello Helmut,
I repeated the test with some more systematic to get a chance to get a
deeper view on what is going on.
The test was done using netperf with the following two calls:
netperf -t TCP_MAERTS -H host -l 60
netperf -t TCP_STREAM -H host -l 60
The test is done with two different notebooks as STA:
notebook ath9k:
built-in ar9285 device, intel core i5 processor, linux 3.2.1 / 64 bit
kernel.
notebook rt3572:
WUSB600Nv2 WLAN USB stick (inserted horizontally into the USB port of
the back of the notebook), intel celeron M processor, linux 2.6.37.6 /
32 bit kernel, Ralink rt5572sta.
AP:
rt2860 based pci device (Linksys WMP600N) with compat-wireless-3.3-rc1-2
with all recent patches incl. "mac80211: revert: retry sending failed
BAR frames later instead of tearing down aggr" with linux 3.1.4 / 64 bit
smp.
The network parameters are:
2,4 GHz, 40 MHz, WPA2 EAP-TLS, CCMP
The following chart should be read like this:
- one measurement / line: the device operates alone
- two measurements / line: both devices run exactly (+/- few ms) at the
same time
- one direction of the data stream / line: both devices operate at the
same direction
- two directions of the data stream / line: each device operates at the
direction next to it
10^6bits/s 10^6bits/s
ath9k rt3572
desk chair
TCP_STREAM STA -> AP 57.10
TCP_STREAM STA -> AP 55.22
TCP_STREAM STA -> AP 2.52 49.97
TCP_STREAM STA -> AP 2.84 49.94
TCP_STREAM STA -> AP 3.82 47.09
TCP_STREAM STA -> AP 4.27 47.57
TCP_STREAM STA -> AP 2.28 48.89
TCP_MAERTS AP -> STA 65.39
TCP_MAERTS AP -> STA 91.65
TCP_MAERTS AP -> STA 14.06 51.07
TCP_MAERTS AP -> STA 6.55 59.78
TCP_MAERTS AP -> STA 18.87 49.62
TCP_MAERTS AP -> STA 10.73 56.63
TCP_MAERTS AP -> STA 30.28 35.33 TCP_STREAM STA -> AP
TCP_MAERTS AP -> STA 31.65 32.83 TCP_STREAM STA -> AP
TCP_MAERTS AP -> STA 32.05 34.23 TCP_STREAM STA -> AP
TCP_STREAM AP -> STA 0.12 66.23 TCP_MAERTS STA -> AP
TCP_STREAM AP -> STA 0.10 69.89 TCP_MAERTS STA -> AP
----------------------------------------------------------------------
The position of the notebooks was changed:
ath9k rt3572
chair desk
TCP_STREAM STA -> AP 29.27
TCP_STREAM STA -> AP 55.79
TCP_STREAM STA -> AP interrupted 56.32
system call
TCP_STREAM STA -> AP interrupted 55.65
system call
TCP_MAERTS AP -> STA 80.73
TCP_MAERTS AP -> STA 79.15
TCP_MAERTS AP -> STA 17.13 62.02
TCP_MAERTS AP -> STA 15.14 63.92
TCP_MAERTS AP -> STA 12.53 66.41
TCP_MAERTS AP -> STA 11.95 66.17
TCP_MAERTS AP -> STA 8.44 50.19 TCP_STREAM STA -> AP
TCP_MAERTS AP -> STA 9.31 49.67 TCP_STREAM STA -> AP
TCP_MAERTS AP -> STA 11.24 46.72 TCP_STREAM STA -> AP
TCP_STREAM AP -> STA 0.96 74.82 TCP_MAERTS STA -> AP
TCP_STREAM AP -> STA 0.01 80.22 TCP_MAERTS STA -> AP
I'll try to repeat the complete test with another AP.
Regards,
Andreas
next prev parent reply other threads:[~2012-01-25 8:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-24 18:19 ath9k get's completely knocked out by rt3572 device Andreas Hartmann
2012-01-24 20:07 ` Helmut Schaa
2012-01-24 21:52 ` Andreas Hartmann
2012-01-25 7:53 ` Helmut Schaa
2012-01-25 8:15 ` Andreas Hartmann [this message]
2012-01-25 10:51 ` Andreas Hartmann
2012-01-25 12:23 ` Helmut Schaa
2012-01-25 13:29 ` Andreas Hartmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F1FBA09.3000003@01019freenet.de \
--to=andihartmann@01019freenet.de \
--cc=helmut.schaa@googlemail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).