Re: [RFC] carl9170: Fix memory accounting when sta is in power-save mode.

[Nicolas Cavallari <Nicolas.Cavallari@lri.fr>]

On 23/02/2012 19:51, Nicolas Cavallari wrote:
> On 23/02/2012 19:08, Christian Lamparter wrote:
>> On Thursday, February 23, 2012 06:27:59 PM Nicolas Cavallari wrote:
>>> On 23/02/2012 17:52, Christian Lamparter wrote:
>>>> On Thursday, February 23, 2012 04:53:34 PM Nicolas Cavallari wrote:
>>>>> While this seems to fix my problem, there could still be problems remaining
>>>>> in this code path.  Particularly carl9170_tx_status will do lots of things
>>>>> like incrementing counters and waking up mac80211 queues...
>>>> That should be alright. As a rule of thumb, for every call to
>>>> carl9170_tx_accounting [called by carl9170_op_tx tx handler]
>>>> we need to call carl9170_tx_status. If the station is still in
>>>> ps mode, mac80211 will cache the station's frames and sets
>>>> the TIM bits. 
>>> Part of the reason i wrote this, is because, while this patch fixes the
>>> memory accounting problem and prevent the AP from stopping working, the
>>> powersaving station sometimes cannot communicate with the AP anymore
>>> (other stations can). The station uses ath9k, and is just really doing a
>>> background scan. The first traces that i have just indicate that the
>>> station entered powersave mode, then sends probe requests and probe
>>> requests directed to the AP, then sends authentication requests to the
>>> AP (?), but the AP does not respond to any of them...
>>>
>> Do you run an 802.11n ap on carl9170?
> No, it's a 802.11g currently.
> My current wild guess is that, the responses to those requests are
> somehow still queued ...

And i was right...

/*
 * Ignore doze->wake transitions that are
 * indicated by non-data frames, the standard
 * is unclear here, but for example going to
 * PS mode and then scanning would cause a
 * doze->wake transition for the probe request,
 * and that is clearly undesirable.
 */
if (ieee80211_is_data(hdr->frame_control) &&
    !ieee80211_has_pm(hdr->frame_control))
	ap_sta_ps_end(sta);

As (re)associations requests and Auth frames are not data frames,
mac80211 still considers that the station is still in powersave mode, so
it still queues frames, and even queues the responses to the auth
frames. Except that the station disassociated silently, and is trying to
re-associate after a short time.

Shouldn't mac80211 transition the sta to "awake" when receiving
auth/assoc frames ?