From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from hermes.mlbassoc.com ([64.234.241.98]:47756 "EHLO mail.chez-thomas.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030455Ab2B2StD (ORCPT ); Wed, 29 Feb 2012 13:49:03 -0500 Message-ID: <4F4E731B.7080704@mlbassoc.com> (sfid-20120229_194908_103400_EC9782BC) Date: Wed, 29 Feb 2012 11:48:59 -0700 From: Gary Thomas MIME-Version: 1.0 To: Linux Wireless CC: Luciano Coelho Subject: Re: Help building compat-wireless References: <4F4E47BC.8000306@mlbassoc.com> In-Reply-To: <4F4E47BC.8000306@mlbassoc.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 2012-02-29 08:43, Gary Thomas wrote: > I'm struggling a bit to build compat-wireless in a cross-build environment. > I normally don't build kernels in-tree, rather I use a build tree, e.g. > % cd > % mkdir /tmp/kernel_build > % make O=/tmp/kernel_build > % make O=/tmp/kernel_build uImage > > I can't see how to use this setup with the compat-wireless package. > I tried [all the combinations I could think of] something like this: > % cd > % make KLIB= KLIB_BUILD=/tmp/kernel_build > However, this seems to not work as all I get are errors like this: > /local/compat-wireless-2012-02-28/config.mk:242: "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools > using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m." > > Does this process work in my workflow? What do I need to do to > get it going? I managed to get past this, using this % make KLIB=/tmp/kernel_build KLIB_BUILD=/tmp/kernel_build but to get it to actually build anything, I had to append the 'modules' target, e.g. % make KLIB=/tmp/kernel_build KLIB_BUILD=/tmp/kernel_build modules Next problems: * How do I select sub-options? I only want WL12xx support with SDIO, but that requires some sub-options to be set that don't appear to happen. I get the main wl12xx module, but not wl12xx_sdio or wl12xx_platform_data * There are a number of files which don't build against my 2.6.37 kernel, but none of these are important to me (they are in the bluetooth driver which I don't need, but nonetheless it gets built) * The make/install is terribly broken for cross-builds. I hacked my way past these problems and finally got some modules which I can try. Sadly, they don't work at all: # modprobe wl12xx_sdio wl12xx: loaded # ifconfig wlan0 up wl1271_sdio mmc1:0001:2: sdio write failed (-110) wl1271_sdio mmc1:0001:2: sdio write failed (-110) ... Note: This driver in my kernel tree gets much farther than this - it will actually download firmware and talk to the device, so I'm pretty perplexed by this failure. Any help greatly appreciated -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------