Re: Problems with wl1271

linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

From: Gary Thomas <gary@mlbassoc.com>
To: Luciano Coelho <coelho@ti.com>
Cc: Linux Wireless <linux-wireless@vger.kernel.org>
Subject: Re: Problems with wl1271
Date: Thu, 01 Mar 2012 05:10:59 -0700	[thread overview]
Message-ID: <4F4F6753.5020409@mlbassoc.com> (raw)
In-Reply-To: <1330602450.18637.160.camel@cumari>

[-- Attachment #1: Type: text/plain, Size: 2605 bytes --]

On 2012-03-01 04:47, Luciano Coelho wrote:
> On Thu, 2012-03-01 at 04:35 -0700, Gary Thomas wrote:
>> On 2012-02-29 13:53, Gary Thomas wrote:
>>> I'm trying to bring up a new hardware platform which includes
>>> the TiWi-r02 (wl1271). Since the kernel for my target device
>>> (AM3874) is stuck in the dark ages, Luciano suggested that I
>>> try compat-wireless + iw. I've managed to build these now
>>> (after encountering many problems that I'll help iron out later)
>>> and now have the system ready to start using the device. Note:
>>> I'm using compat-wireless-2012-02-28 and iw-3.2
>>>
>>> The kernel modules load and initialize now, with these messages:
>
> [...]
>
>>> wl12xx: loaded
>>>
>>> When I try to bring up the device, I get this:
>>> # ifconfig wlan0 hw ether 2a:00:24:01:02:03
>>> # ifconfig wlan0 up
>>> wl12xx: firmware booted (Rev 6.3.5.0.98)
>>> ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>
>>> If I try to scan for an access point, I get nothing:
>>> # iw wlan0 scan
>>> --- Nothing prints
>>> #
>>> I also see no additional messages in dmesg.
>>>
>>> Further checking of the device:
>
> [...]
>
>>> I don't know enough about this device to understand why it's not working.
>>> Perhaps the line
>>> Available Antennas: TX 0 RX 0
>>> is a clue?
>>>
>>> Any ideas what's not working&  how I need to do to move forward?
>>>
>>> Thanks in advance for all the help
>>>
>>
>> Any ideas at all?  Is there some debug info I can get to find
>> out what's going on?
>>
>> Note: I compared the output of 'iw list' from my non-functional system
>> to that of a working one (OMAP4430 PandaBoard) and they are virtually
>> identical, even the line about the antenna...
>
> Yes, all this looks normal.  Try to enable some debugging in the driver.
> You need to enable the dynamic debugging in your kernel config (if you
> don't have it yet) and do something like this:
>
> echo "module wl12xx +p">  /sys/kernel/debug/dynamic_debug/control
> echo 0x101>  /sys/module/wlcore/parameters/debug_level
>
> The 0x101 value enables IRQ and SCAN debug prints.  You can see more
> options in drivers/net/wireless/wl12xx/debug.h.
>
> Please try to scan with this debugging level and send me what you get.
>

Results attached.  It looks like it does see something on channel 11 (2462MHz)
which is correct - I have a router sitting about 2m from the unit operating
on channel 11.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

[-- Attachment #2: iw.debug --]
[-- Type: text/plain, Size: 18585 bytes --]

PM: Adding info for platform:wl12xx
Compat-wireless backport release: compat-wireless-2012-02-28
Backport based on linux-next.git next-20120228
PM: Adding info for platform:regulatory.0
cfg80211: Calling CRDA to update world regulatory domain
PM: Adding info for No Bus:wl12xx
PM: Removing info for No Bus:wl12xx
PM: Adding info for No Bus:phy0
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Disabling freq 5035 MHz
cfg80211: Disabling freq 5040 MHz
cfg80211: Disabling freq 5045 MHz
cfg80211: Disabling freq 5055 MHz
cfg80211: Disabling freq 5060 MHz
cfg80211: Disabling freq 5080 MHz
cfg80211: Disabling freq 5170 MHz
cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Disabling freq 5260 MHz
cfg80211: Disabling freq 5280 MHz
cfg80211: Disabling freq 5300 MHz
cfg80211: Disabling freq 5320 MHz
cfg80211: Disabling freq 5500 MHz
cfg80211: Disabling freq 5520 MHz
cfg80211: Disabling freq 5540 MHz
cfg80211: Disabling freq 5560 MHz
cfg80211: Disabling freq 5580 MHz
cfg80211: Disabling freq 5600 MHz
cfg80211: Disabling freq 5620 MHz
cfg80211: Disabling freq 5640 MHz
cfg80211: Disabling freq 5660 MHz
cfg80211: Disabling freq 5680 MHz
cfg80211: Disabling freq 5700 MHz
cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
PM: Adding info for No Bus:wlan0
wl12xx: loaded
NET: Registered protocol family 10

CPSW phy found : id is : 0x1410e11
PHY 0:01 not found
ADDRCONF(NETDEV_UP): eth0: link is not ready
PHY: 0:00 - Link is Up - 100/Full
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
PM: Adding info for No Bus:wl12xx
PM: Removing info for No Bus:wl12xx
wl12xx: IRQ
wl12xx: firmware booted (Rev 6.3.5.0.98)
ieee80211 phy0: device now idle
wl12xx: IRQ work
wl12xx: intr: 0x20 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wl12xx: IRQ
wl12xx: band 0, center_freq 2412 
wl12xx: hw_value 1, flags 20
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2417 
wl12xx: hw_value 2, flags 20
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2422 
wl12xx: hw_value 3, flags 20
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2427 
wl12xx: hw_value 4, flags 20
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2432 
wl12xx: hw_value 5, flags 0
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2437 
wl12xx: hw_value 6, flags 0
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2442 
wl12xx: hw_value 7, flags 0
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2447 
wl12xx: hw_value 8, flags 10
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2452 
wl12xx: hw_value 9, flags 10
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2457 
wl12xx: hw_value 10, flags 10
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2462 
wl12xx: hw_value 11, flags 10
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: PROBE REQ: 00000000: 40 00 00 00 ff ff ff ff ff ff 2a 00 24 01 02 03
wl12xx: PROBE REQ: 00000010: ff ff ff ff ff ff 00 00 00 00 01 08 02 04 0b 16
wl12xx: PROBE REQ: 00000020: 0c 12 18 24 32 04 30 48 60 6c 2d 1a 30 01 18 ff
wl12xx: PROBE REQ: 00000030: 00 00 00 00 00 00 00 00 00 48 00 01 00 00 00 00
wl12xx: PROBE REQ: 00000040: 00 00 00 00 00 00
wl12xx: SCAN: 00000000: 00 00 00 00 02 00 00 0b 02 1f 00 00 01 00 00 00
wl12xx: SCAN: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000030: 00 01 00 00 4c 1d 00 00 30 75 00 00 ff ff ff ff
wl12xx: SCAN: 00000040: ff ff 00 14 01 00 00 00 4c 1d 00 00 30 75 00 00
wl12xx: SCAN: 00000050: ff ff ff ff ff ff 00 14 02 00 00 00 4c 1d 00 00
wl12xx: SCAN: 00000060: 30 75 00 00 ff ff ff ff ff ff 00 14 03 00 00 00
wl12xx: SCAN: 00000070: 4c 1d 00 00 30 75 00 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 00000080: 04 00 00 00 4c 1d 00 00 30 75 00 00 ff ff ff ff
wl12xx: SCAN: 00000090: ff ff 00 14 05 00 00 00 4c 1d 00 00 30 75 00 00
wl12xx: SCAN: 000000a0: ff ff ff ff ff ff 00 14 06 00 00 00 4c 1d 00 00
wl12xx: SCAN: 000000b0: 30 75 00 00 ff ff ff ff ff ff 00 14 07 00 00 00
wl12xx: SCAN: 000000c0: 4c 1d 00 00 30 75 00 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 000000d0: 08 00 00 00 4c 1d 00 00 30 75 00 00 ff ff ff ff
wl12xx: SCAN: 000000e0: ff ff 00 14 09 00 00 00 4c 1d 00 00 30 75 00 00
wl12xx: SCAN: 000000f0: ff ff ff ff ff ff 00 14 0a 00 00 00 4c 1d 00 00
wl12xx: SCAN: 00000100: 30 75 00 00 ff ff ff ff ff ff 00 14 0b 00 00 00
wl12xx: SCAN: 00000110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000210: 00 00 00 00 2a 00 24 01 02 03 00 00
wl12xx: IRQ work
wl12xx: intr: 0x20 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE
wl12xx: IRQ
wl12xx: IRQ work
wl12xx: intr: 0x24 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_EVENT_A
wl12xx: band 0, center_freq 2467 
wl12xx: hw_value 12, flags 36
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2472 
wl12xx: hw_value 13, flags 36
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2484 
wl12xx: hw_value 14, flags 36
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: PROBE REQ: 00000000: 40 00 00 00 ff ff ff ff ff ff 2a 00 24 01 02 03
wl12xx: PROBE REQ: 00000010: ff ff ff ff ff ff 00 00 00 00 01 08 02 04 0b 16
wl12xx: PROBE REQ: 00000020: 0c 12 18 24 32 04 30 48 60 6c 2d 1a 30 01 18 ff
wl12xx: PROBE REQ: 00000030: 00 00 00 00 00 00 00 00 00 48 00 01 00 00 00 00
wl12xx: PROBE REQ: 00000040: 00 00 00 00 00 00
wl12xx: SCAN: 00000000: 00 00 00 00 03 00 00 03 02 1f 00 00 01 00 00 00
wl12xx: SCAN: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000030: 00 01 00 00 a0 86 01 00 a0 86 01 00 ff ff ff ff
wl12xx: SCAN: 00000040: ff ff 00 14 0c 00 00 00 a0 86 01 00 a0 86 01 00
wl12xx: SCAN: 00000050: ff ff ff ff ff ff 00 14 0d 00 00 00 a0 86 01 00
wl12xx: SCAN: 00000060: a0 86 01 00 ff ff ff ff ff ff 00 14 0e 00 00 00
wl12xx: SCAN: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000210: 00 00 00 00 2a 00 24 01 02 03 00 00
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE
wl12xx: IRQ
wl12xx: IRQ work
wl12xx: intr: 0x28 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_EVENT_B
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE
wl12xx: Scanning complete
wl12xx: band 1, center_freq 5180 
wl12xx: hw_value 36, flags 26
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5190 
wl12xx: hw_value 38, flags 26
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5200 
wl12xx: hw_value 40, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5210 
wl12xx: hw_value 42, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5220 
wl12xx: hw_value 44, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5230 
wl12xx: hw_value 46, flags 16
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5240 
wl12xx: hw_value 48, flags 16
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5745 
wl12xx: hw_value 149, flags 26
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5765 
wl12xx: hw_value 153, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5785 
wl12xx: hw_value 157, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5805 
wl12xx: hw_value 161, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5825 
wl12xx: hw_value 165, flags 16
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: PROBE REQ: 00000000: 40 00 00 00 ff ff ff ff ff ff 2a 00 24 01 02 03
wl12xx: PROBE REQ: 00000010: ff ff ff ff ff ff 00 00 00 00 01 08 0c 12 18 24
wl12xx: PROBE REQ: 00000020: 30 48 60 6c 2d 1a 30 01 18 ff 00 00 00 00 00 00
wl12xx: PROBE REQ: 00000030: 00 00 00 48 00 01 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000000: 00 00 00 00 03 00 00 0c 02 1f 00 00 08 00 00 00
wl12xx: SCAN: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000030: 01 01 00 00 a0 86 01 00 a0 86 01 00 ff ff ff ff
wl12xx: SCAN: 00000040: ff ff 00 14 24 00 00 00 a0 86 01 00 a0 86 01 00
wl12xx: SCAN: 00000050: ff ff ff ff ff ff 00 14 26 00 00 00 a0 86 01 00
wl12xx: SCAN: 00000060: a0 86 01 00 ff ff ff ff ff ff 00 14 28 00 00 00
wl12xx: SCAN: 00000070: a0 86 01 00 a0 86 01 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 00000080: 2a 00 00 00 a0 86 01 00 a0 86 01 00 ff ff ff ff
wl12xx: SCAN: 00000090: ff ff 00 14 2c 00 00 00 a0 86 01 00 a0 86 01 00
wl12xx: SCAN: 000000a0: ff ff ff ff ff ff 00 14 2e 00 00 00 a0 86 01 00
wl12xx: SCAN: 000000b0: a0 86 01 00 ff ff ff ff ff ff 00 14 30 00 00 00
wl12xx: SCAN: 000000c0: a0 86 01 00 a0 86 01 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 000000d0: 95 00 00 00 a0 86 01 00 a0 86 01 00 ff ff ff ff
wl12xx: SCAN: 000000e0: ff ff 00 14 99 00 00 00 a0 86 01 00 a0 86 01 00
wl12xx: SCAN: 000000f0: ff ff ff ff ff ff 00 14 9d 00 00 00 a0 86 01 00
wl12xx: SCAN: 00000100: a0 86 01 00 ff ff ff ff ff ff 00 14 a1 00 00 00
wl12xx: SCAN: 00000110: a0 86 01 00 a0 86 01 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 00000120: a5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000210: 00 00 00 00 2a 00 24 01 02 03 00 00
wl12xx: IRQ
wl12xx: IRQ work
wl12xx: intr: 0x24 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_EVENT_A
wl12xx: Scanning complete
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE

next prev parent reply	other threads:[~2012-03-01 12:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-29 20:53 Problems with wl1271 Gary Thomas
2012-03-01 11:35 ` Gary Thomas
2012-03-01 11:47   ` Luciano Coelho
2012-03-01 12:10     ` Gary Thomas [this message]
2012-03-01 12:13 ` Ohad Ben-Cohen
2012-03-01 12:28   ` Gary Thomas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F4F6753.5020409@mlbassoc.com \
    --to=gary@mlbassoc.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).