linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: brcmsmac not working well
@ 2012-03-27 16:50 Arend van Spriel
  0 siblings, 0 replies; 4+ messages in thread
From: Arend van Spriel @ 2012-03-27 16:50 UTC (permalink / raw)
  To: Naveen Goswamy; +Cc: linux-wireless@vger.kernel.org

On 03/27/2012 04:53 PM, Naveen Goswamy wrote:
 > I have the BCM4313 [14e4:4727] (rev 01)
 >
 > When using wireshark, I see that I am getting many {TCP 
Retransmission,TCP Dup
 > ACK,TCP RST} with {TCP, HTTP, SSH} when using brcmsmac driver in the 
3.2.1
 > kernel.  I've tried 3.3-rc5 kernel with similar results.
 >
 > I notice a lot of these popping up in /var/log/messages as well:
 >
 > ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 
155/256 dur
 > 1746/1504
 > ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 
130/256 dur
 > 1546/1504
 > ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 
130/256 dur
 > 1546/1504
 >
 >
 > any ideas how to solve this?
Starting a new thread (I hope)

These messages are only indicating (possible) violation of the WMM txop 
parameter. So what problem are you looking into here beside the issues 
you observe in wireshark. I mean the problem that made you decide to run 
wireshark.

Gr. AvS


^ permalink raw reply	[flat|nested] 4+ messages in thread
* [PATCH 0/3] trivial changes preparing mac80211 for multi-channel
@ 2012-03-27 13:55 Michal Kazior
  2012-03-27 13:55 ` [PATCH 3/3] mac80211: prepare ieee80211_*_duration to per-vif Michal Kazior
  0 siblings, 1 reply; 4+ messages in thread
From: Michal Kazior @ 2012-03-27 13:55 UTC (permalink / raw)
  To: johannes; +Cc: linux-wireless, Michal Kazior

Hi,

This patchset contains 3 patches from my previous RFC. One of them has
been fixed as suggested.


-- Pozdrawiam / Best regards, Michal Kazior.


^ permalink raw reply	[flat|nested] 4+ messages in thread
* brcmsmac not working well
@ 2012-02-29 18:21 Naveen Goswamy
  0 siblings, 0 replies; 4+ messages in thread
From: Naveen Goswamy @ 2012-02-29 18:21 UTC (permalink / raw)
  To: linux-wireless

Hi, I've tested brcmsmac in 3.2 and 3.3, and it really is not stable enough to
use for me.  I have the BCM4313 [14e4:4727] (rev 01)

One noticeable problem is trying to SSH is nearly impossible (including sftp and
sshfs mounting).  Also web browsing slows to a crawl and eventually tanks.

I'd like to know how to debug this, and if there are any known issues.

TIA,

ng





^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2012-03-27 16:50 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-27 16:50 brcmsmac not working well Arend van Spriel
  -- strict thread matches above, loose matches on Subject: below --
2012-03-27 13:55 [PATCH 0/3] trivial changes preparing mac80211 for multi-channel Michal Kazior
2012-03-27 13:55 ` [PATCH 3/3] mac80211: prepare ieee80211_*_duration to per-vif Michal Kazior
2012-03-27 14:53   ` brcmsmac not working well Naveen Goswamy
2012-03-27 15:08     ` Johannes Berg
2012-02-29 18:21 Naveen Goswamy

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).