From: Ben Greear <greearb@candelatech.com>
To: Michael Leun <lkml20120218@newton.leun.net>
Cc: Mohammed Shafi <shafi.wireless@gmail.com>,
casteyde.christian@free.fr,
Kelly Anderson <kelly@silka.with-linux.com>,
"ath9k-devel@lists.ath9k.org" <ath9k-devel@venema.h4ckr.net>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Felix Fietkau <nbd@openwrt.org>,
linux-wireless Mailing List <linux-wireless@vger.kernel.org>
Subject: Re: [ath9k-devel] 3.3.1 ath9k regression
Date: Thu, 05 Apr 2012 11:25:40 -0700 [thread overview]
Message-ID: <4F7DE3A4.1040705@candelatech.com> (raw)
In-Reply-To: <20120404235104.682cfad3@xenia.leun.net>
I see the regression on my WPEA-127N systems as well.
With the patch applied to 3.3.1, I see never ending stream of
auth timeouts (this log is watching 'iw event' output)
power-management is OFF on my system, and using nohwcrypt,
in case that matters.
This is with 10 virtual stations.
2012-04-05 11:16:14.155 1.1: sta5 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300
5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825, ""
2012-04-05 11:16:15.266 1.1: sta0 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta1 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta2 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta3 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta4 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta6 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta7 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta8 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta9 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta5 (phy #0): auth: timed out
2012-04-05 11:16:19.400 1.1: sta0 (phy #0): scan started
2012-04-05 11:16:23.302 1.1: sta0 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300
5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825, ""
2012-04-05 11:16:24.406 1.1: sta1 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta2 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta3 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta4 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta5 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta6 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta7 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta8 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta9 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta0 (phy #0): auth: timed out
I reverted the patch and then it associates immediately.
Occasionally, I would see things associate and run OK with the patch
in place, but it always took a lot of re-tries to associate
even when it did work.
I can easily test patches or try things if anyone has any ideas.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
next prev parent reply other threads:[~2012-04-05 18:26 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4F7A8EB7.4060200@silka.with-linux.com>
[not found] ` <4F7A923D.5000002@candelatech.com>
2012-04-03 6:26 ` [ath9k-devel] 3.3.1 ath9k regression Mohammed Shafi
2012-04-03 6:49 ` Kelly Anderson
2012-04-03 7:16 ` Mohammed Shafi
2012-04-03 7:46 ` Kelly Anderson
2012-04-03 7:52 ` Mohammed Shafi
2012-04-03 8:04 ` Mohammed Shafi
2012-04-03 8:38 ` Kelly Anderson
2012-04-03 18:03 ` Michael Leun
2012-04-04 7:29 ` Mohammed Shafi
2012-04-04 15:03 ` Mohammed Shafi
2012-04-04 21:51 ` Michael Leun
2012-04-05 6:16 ` Mohammed Shafi
2012-04-05 13:53 ` Michael Leun
2012-04-05 18:25 ` Ben Greear [this message]
2012-04-06 5:11 ` Mohammed Shafi
2012-04-06 20:31 ` Ben Greear
2012-04-08 23:08 ` 3.4-rc ath9k regression (Re: [ath9k-devel] 3.3.1 ath9k regression) Michael Leun
2012-04-09 6:28 ` Mohammed Shafi
2012-04-09 8:45 ` Sergio Correia
2012-04-09 10:25 ` Michael Leun
2012-04-09 14:03 ` Michael Leun
2012-04-09 14:22 ` Mohammed Shafi
2012-04-09 15:29 ` Michael Leun
2012-04-10 5:48 ` Mohammed Shafi
2012-04-10 10:05 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Mohammed Shafi
2012-04-12 13:46 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felix Fietkau
2012-04-12 13:58 ` Felipe Contreras
2012-04-12 15:35 ` Michael Leun
2012-04-12 18:11 ` Felix Fietkau
2012-04-12 19:28 ` Sergio Correia
2012-04-14 21:15 ` Felipe Contreras
2012-04-12 22:01 ` Michael Leun
2012-04-09 19:12 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Sujith Manoharan
2012-04-09 21:21 ` Michael Leun
2012-04-09 6:52 ` [ath9k-devel] 3.3.1 ath9k regression Mohammed Shafi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F7DE3A4.1040705@candelatech.com \
--to=greearb@candelatech.com \
--cc=ath9k-devel@venema.h4ckr.net \
--cc=casteyde.christian@free.fr \
--cc=kelly@silka.with-linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lkml20120218@newton.leun.net \
--cc=nbd@openwrt.org \
--cc=shafi.wireless@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).